void bazier(float xb,float yb,float xc,float yc,float xd,float yd,int n)
{
float xab,yab,xbc,ybc,xcd,ycd;
float xabc,yabc,xbcd,ybcd;
float xabcd,yabcd;
//sprintf(s,"(%d%d)",xb yb);
outtextxy(xb,yb,s);
if(n==0)
{
line1(xb,yb);
line1(xc,yc);
line1(xd,yd);
}
else
{
xab=(xxx[0][0]+xb)/2;
yab=(xxx[0][1]+yb)/2;
xbc=(xb+xc)/2;
ybc=(yb+yc)/2;
xcd=(xc+xd)/2;
ycd=(yc+yd)/2;
xabc=(xab+xbc)/2;
yabc=(yab+ybc)/2;
xbcd=(xbc+xcd)/2;
ybcd=(ybc+ycd)/2;
xabcd=(xabc+xbcd)/2;
yabcd=(yabc+ybcd)/2;
n=n-1;
bazier(xab,yab,xabc,yabc,xabcd,yabcd,n);
bazier(xbcd,ybcd,xcd,ycd,xd,yd,n);
}
}
bezier(float xb,float yb,float xc,float yc,float xd,float yd,int n)
{
float xab,yab,xbc,ybc,xcd,ycd;
float xabc,yabc,xbcd,ybcd;
float xabcd,yabcd;
if (n==0)
{
line1(xb,yb);
line1(xc,yc);
line1(xd,yd);
}
else
{
xab = (xxx[0][0]+xb)/2;
yab = (xxx[0][1]+yb)/2;
xbc = (xb+xc)/2;
ybc = (yb+yc)/2;
xcd = (xc+xd)/2;
ycd = (yc+yd)/2;
xabc = (xab+xbc)/2;
yabc = (yab+ybc)/2;
xbcd = (xbc+xcd)/2;
ybcd = (ybc+ycd)/2;
xabcd = (xabc+xbcd)/2;
yabcd = (yabc+ybcd)/2;
n=n-1;
bezier(xab,yab,xabc,yabc,xabcd,yabcd,n);
bezier(xbcd,ybcd,xcd,ycd,xd,yd,n);
}
return (0);
}
void dump_grid_range_highlight(const Grid & grid,
ssize_t ix0, ssize_t iy0,
ssize_t ix1, ssize_t iy1,
ssize_t ixhigh, ssize_t iyhigh,
FILE * stream)
{
PVDEBUG("%zu %zu %zu %zu %zu %zu\n",
ix0, iy0, ix1, iy1, ixhigh, iyhigh);
fprintf(stream, " ");
for(ssize_t ix(ix0); ix <= ix1; ++ix)
if(ix == ixhigh) fprintf(stream, " ***********");
else fprintf(stream, " ");
fprintf(stream, " \n");
ssize_t iy(iy1);
for(/**/; iy != iy0; --iy){
const char * high(iy == iyhigh ? "*" : " ");
linesep(grid, stream, ix0, ix1, 0, " ");
line1(grid, stream, iy, ix0, ix1, 0, high);
line2(grid, stream, iy, ix0, ix1, 0, high);
line3(grid, stream, iy, ix0, ix1, 0, high);
line4(grid, stream, iy, ix0, ix1, 0, high);
}
const char * high(iy == iyhigh ? "*" : " ");
linesep(grid, stream, ix0, ix1, 0, " ");
line1(grid, stream, iy, ix0, ix1, 0, high);
line2(grid, stream, iy, ix0, ix1, 0, high);
line3(grid, stream, iy, ix0, ix1, 0, high);
line4(grid, stream, iy, ix0, ix1, 0, high);
linesep(grid, stream, ix0, ix1, 0, " ");
fprintf(stream, " ");
for(ssize_t ix(ix0); ix <= ix1; ++ix)
if(ix == ixhigh) fprintf(stream, " ***********");
else fprintf(stream, " ");
fprintf(stream, " \n");
}
void dump_grid_range(const Grid & grid,
ssize_t ix0, ssize_t iy0, ssize_t ix1, ssize_t iy1,
FILE * stream)
{
PVDEBUG("%zu %zu %zu %zu\n", ix0, iy0, ix1, iy1);
const char * even("");
const char * oddsep;
const char * oddpre;
if (grid.GetNeighborhood() == Grid::SIX) {
oddsep = "+-----";
oddpre = " ";
}
else {
oddsep = even;
oddpre = even;
}
ssize_t iy(iy1);
const char * prefix;
for(/**/; iy != iy0; --iy){
if(iy % 2){
linesep(grid, stream, ix0, ix1, oddsep, 0);
prefix = oddpre;
}
else{
linesep(grid, stream, ix0, ix1, even, 0);
prefix = even;
}
line1(grid, stream, iy, ix0, ix1, prefix, 0);
line2(grid, stream, iy, ix0, ix1, prefix, 0);
line3(grid, stream, iy, ix0, ix1, prefix, 0);
line4(grid, stream, iy, ix0, ix1, prefix, 0);
}
if(iy % 2){
linesep(grid, stream, ix0, ix1, oddsep, 0);
prefix = oddpre;
}
else{
linesep(grid, stream, ix0, ix1, even, 0);
prefix = even;
}
line1(grid, stream, iy, ix0, ix1, prefix, 0);
line2(grid, stream, iy, ix0, ix1, prefix, 0);
line3(grid, stream, iy, ix0, ix1, prefix, 0);
line4(grid, stream, iy, ix0, ix1, prefix, 0);
if(iy % 2)
linesep(grid, stream, ix0, ix1, even, 0);
else
linesep(grid, stream, ix0, ix1, oddsep, 0);
}
void test_circuit_rc()
{
ngdc dc("dc1", 5);
ngresistor r("r1", 5);
ngcapacitor c("c1", 0.2);
ngground gnd;
ngline line1(dc[0], r[0]);
ngline line2(r[1], c[0]);
ngline line3(c[1], dc[1]);
ngline line4(dc[0], gnd[0]);
schema sch("design1");
sch.AddDevice(&dc);
sch.AddDevice(&r);
sch.AddDevice(&c);
sch.AddDevice(&gnd);
sch.AddLine(&line1);
sch.AddLine(&line2);
sch.AddLine(&line3);
sch.AddLine(&line4);
circuit cir(&sch);
cir.Tran("1s");
do
{
Sleep(200);
} while (cir.IsRunning());
}
vector<Pixel> Rectangle::getPixels() const{
Point p1(mPositionX,mPositionY);
Point p2(mPositionX+mWidth,mPositionY);
Point p3(mPositionX,mPositionY+mHeight);
Point p4(mPositionX+mWidth,mPositionY+mHeight);
Line line1(p1,p2,mColor);
Line line2(p2,p4,mColor);
Line line3(p3,p4,mColor);
Line line4(p1,p3,mColor);
vector<Pixel> linePixels1 = line1.getPixels();
vector<Pixel> linePixels2 = line2.getPixels();
vector<Pixel> linePixels3 = line3.getPixels();
vector<Pixel> linePixels4 = line4.getPixels();
vector<Pixel> pixels;
pixels.insert(pixels.end(),linePixels1.begin(),linePixels1.end());
pixels.insert(pixels.end(),linePixels2.begin(),linePixels2.end());
pixels.insert(pixels.end(),linePixels3.begin(),linePixels3.end());
pixels.insert(pixels.end(),linePixels4.begin(),linePixels4.end());
return pixels;
}
TEST_F(TestDrawing, TestGetCenterNonOrigin2) {
//LineSegment {(3.35231, 0.518918) <-> (1.35231, 0.518918)}
//Arc {r1 @(3.35231, 1.51892), \270 /90s (3.35231, 0.518918), e (3.35231, 2.51892)}
//LineSegment {(1.35231, 2.51892) <-> (3.35231, 2.51892)}
//Arc {r1 @(1.35231, 1.51892), \90 /270s (1.35231, 2.51892), e (1.35231, 0.518918)}
std::shared_ptr<Drawing> drawing = std::make_shared<Drawing>();
drawing->AddComponent(std::make_shared<LineSegment>(3.35231L,0.518918L,1.35231,0.518918));
drawing->AddComponent(std::make_shared<Arc>(1.0L,270,90,pt(3.35231,1.51892)));
drawing->AddComponent(std::make_shared<LineSegment>(1.35231L,2.51892L,3.35231L,2.51892L));
drawing->AddComponent(std::make_shared<Arc>(1.0L,90,270,pt(1.35231L,1.51892L)));
drawing->Print(std::cout);
std::cout << std::endl;
double yCenter = (2.51892L-0.518918L)/2+0.518918L;
double xCenter = (3.35231L-1.35231L)/2+1.35231L;
std::list<double> collissions;
Line line1(xCenter, 0, xCenter, 10);
drawing->GetCollissions(line1, collissions);
collissions.sort();
ASSERT_EQ(2u, collissions.size());
pt center = drawing->GetCenter();
EXPECT_DOUBLE_EQ(yCenter, center.y);
EXPECT_TRUE(center.x<=(xCenter*1.02));
EXPECT_TRUE(center.x>=(xCenter*0.98));
}
Label TemplatePrinter::templateFiller(const char * templateFilePath)
{
/* THIS IMPLEMENTATION IS TEMPORARY
* In the future, TemplatePrinter will have a container of fields and columns
* just like the label. The templateFiller will loop through the fields and columns to
* A) format the label object with enough columns and fields and B) fill in the data from
* the text fields of the gui. DO NOT rely on this implementation in the future!
*/
Label tempLabel;
QFile xmlFile(templateFilePath);
LabelParser parser(xmlFile, tempLabel);
parser.start();
QString line1(ui->lineEdit->displayText());
QString line2(ui->lineEdit_2->displayText());
QString line3(ui->lineEdit_3->displayText());
Column* column = &((tempLabel.getColumns())->at(0));
Field* field1 = &(column->fields.at(0));
field1->value = line1;
Field* field2 = &(column->fields.at(1));
field2->value = line2;
Column* column2 = &((tempLabel.getColumns())->at(1));
Field* field3 = &(column2->fields.at(1));
field3->value = line3;
return tempLabel;
}
dFloat dPolygonRayCast (const dVector& l0, const dVector& l1, int indexCount, const dFloat* const vertex, int strideInBytes, const int* const indices)
{
int stride = strideInBytes / sizeof (dFloat);
dBigVector line0 (l0);
dBigVector line1(l1);
dBigVector segment (line1 - line0);
dBigVector normal (dPolygonNormal (indexCount, vertex, strideInBytes, indices));
double den = normal % segment;
if (dAbs(den) < 1.0e-6) {
return 1.2f;
}
double sign = (den < 0.0f) ? 1.0f : -1.0f;
int index = indices[indexCount - 1] * stride;
dBigVector v0 (vertex[index], vertex[index + 1], vertex[index + 2], 0.0f);
dBigVector p0v0 (v0 - line0);
for (int i = 0; i < indexCount; i ++) {
index = indices[i] * stride;
dBigVector v1 (vertex[index], vertex[index + 1], vertex[index + 2], 0.0f);
dBigVector p0v1 (v1 - line0);
double alpha = sign * ((p0v1 * p0v0) % segment);
if (alpha < 1.0e-3f) {
return 1.2f;
}
p0v0 = p0v1;
}
double t = - ((line0 - v0) % normal) / den;
if ((t < 0.0f) || (t > 1.0f)) {
return 1.2f;
}
return dFloat (t);
}
/**
* \brief Apply the angle of the slope to a colliding item.
* \param that The other item in the collision.
* \param info Informations on the collision.
*/
void bear::bridge::apply_angle_to
( engine::base_item& that, const universe::collision_info& info) const
{
universe::position_type left_pos(that.get_bottom_left());
universe::position_type right_pos(that.get_bottom_right());
universe::position_type previous_pos;
universe::position_type next_pos;
compute_neighboor
(that.get_bottom_left(),previous_pos,next_pos);
claw::math::line_2d<universe::coordinate_type> line1
( previous_pos, next_pos - previous_pos );
left_pos.y = line1.y_value(that.get_left());
compute_neighboor
(that.get_bottom_right(),previous_pos,next_pos);
claw::math::line_2d<universe::coordinate_type> line2
( previous_pos, next_pos - previous_pos );
right_pos.y = line2.y_value(that.get_right());
claw::math::line_2d<universe::coordinate_type> line
( left_pos, right_pos - left_pos );
double angle = std::atan(line.direction.y / line.direction.x);
that.set_contact_angle(angle);
info.get_collision_repair().set_contact_normal
(that, that.get_x_axis().get_orthonormal_anticlockwise());
} // bridge::apply_angle_to()
void main() {
int gdriver = DETECT, gmode, errorcode;
initgraph(&gdriver, &gmode, "c:\\PROGRAMS\\bc\\bgi");
TLine line1(0, 8);
line1.show();
line1.move(100);
line1.show();
line1.move(100);
line1.povorot(0.4);
line1.show();
TLuch luch1(0.7, 2, 50, 50);
luch1.show();
luch1.move(200, 200);
luch1.show();
luch1.move(100, 100);
luch1.povorot(0.3);
luch1.show();
TOtr otr1(0.0, 900, 100, 100, 200);
otr1.show();
otr1.move(100, 50);
otr1.show();
otr1.move(50, 50);
otr1.show();
otr1.povorot(1.57);
otr1.show();
getch();
cleardevice();
closegraph();
};
bool AppController::_loadFile(const QString& path)
{
if ( !path.endsWith(".dat") )
return false;
QFile file(path);
file.open(QFile::ReadOnly);
QDataStream stream(&file);
while(m_LineController.count() > 0)
model_removeLastLine();
int count;
stream >> count;
qreal x1, y1, x2, y2;
for(int i=0; i<count; ++i)
{
stream >> x1 >> y1 >> x2 >> y2;
QLineF line0(x1, y1, x2, y2);
stream >> x1 >> y1 >> x2 >> y2;
QLineF line1(x1, y1, x2, y2);
model_addLine(line0, line1);
}
stream >> m_Img0 >> m_Img1;
m_Scene0->setPixmap(m_Img0);
m_Scene1->setPixmap(m_Img1);
return true;
}
void GraphicMoteur::paint(QPainter *painter, const QStyleOptionGraphicsItem *option, QWidget *widget)
{
qreal x = _dp.x();
qreal y = _dp.y();
QPolygonF polygone1, polygone2;
QLineF line1(x+9, y+32, x+15, y+32);
QLineF line2(x+31, y+32, x+25, y+32);
polygone1 << QPointF(x, y) << QPointF(x+40, y) << QPointF(x+40, y+13) << QPointF(x, y+13);
polygone2 << QPointF(x+6, y+13) << QPointF(x+34, y+13) << QPointF(x+34, y+25) << QPointF(x+28, y+48)
<< QPointF(x+12, y+48) << QPointF(x+6, y+25);
painter->setPen(pen);
painter->drawText(x+14, y+11, _nom);
QPainterPath path;
path.addPolygon(polygone2);
painter->fillPath(path, brushDefault);
painter->drawPolygon(polygone1);
painter->drawPolygon(polygone2);
painter->drawLine(line1);
painter->drawLine(line2);
}
TEST_F(TestDrawing, TestFromParsedDrawing) {
ParseDXF parser;
DL_Dxf dxf;
dxf.in("test_shape.dxf", &parser);
Drawing const& drawing(parser.GetDrawing());
drawing.Print(std::cout);
std::cout << std::endl;
double yCenter = (2.51892L-0.518918L)/2+0.518918L;
double xCenter = (3.35231L-1.35231L)/2+1.35231L;
std::list<double> collissions;
Line line1(xCenter, 0, xCenter, 10);
drawing.GetCollissions(line1, collissions);
collissions.sort();
ASSERT_EQ(2u, collissions.size());
pt center = drawing.GetCenter();
EXPECT_TRUE(center.y<=(yCenter+0.001)) << "Expected=" << yCenter << " Actual =" << center.y;
EXPECT_TRUE(center.y>=(yCenter-0.001)) << "Expected=" << yCenter << " Actual =" << center.y;
EXPECT_TRUE(center.x<=(xCenter+0.001)) << "Expected=" << xCenter << " Actual =" << center.x;
EXPECT_TRUE(center.x>=(xCenter-0.001)) << "Expected=" << xCenter << " Actual =" << center.x;
}
bool Knob::sceneEvent(QEvent *event)
{
switch (event->type()) {
case QEvent::TouchBegin:
case QEvent::TouchUpdate:
case QEvent::TouchEnd:
{
QTouchEvent *touchEvent = static_cast<QTouchEvent *>(event);
if (touchEvent->touchPoints().count() == 2) {
const QTouchEvent::TouchPoint &touchPoint1 = touchEvent->touchPoints().first();
const QTouchEvent::TouchPoint &touchPoint2 = touchEvent->touchPoints().last();
QLineF line1(touchPoint1.lastScenePos(), touchPoint2.lastScenePos());
QLineF line2(touchPoint1.scenePos(), touchPoint2.scenePos());
rotate(line2.angleTo(line1));
}
break;
}
default:
return QGraphicsItem::sceneEvent(event);
}
return true;
}
bool LineSegConeIntersect(const LineSegment * line, const Cone * cone)
{
Circle circle(cone->GetVertex(), cone->GetHeight());
if (Intersect(line, &circle) == true)
{
if ((cone->ContainsPoint(line->GetPoint1()) == true) || (cone->ContainsPoint(line->GetPoint2()) == true) || (line->ContainsPoint(cone->GetVertex()) == true))
{
return true;
}
Vector3D direction(cone->GetVertex(), cone->GetVertex() + cone->GetDirection());
Float angle = direction.GetZeroAngleD();
Float angle1 = angle + cone->GetAngle();
Float angle2 = angle - cone->GetAngle();
Float height = cone->GetHeight();
Point3D vertex = cone->GetVertex();
LineSegment line1(vertex, Point3D(vertex.GetX() + (CosD(angle1) * height), vertex.GetY() + (SinD(angle1) * height), 0));
LineSegment line2(vertex, Point3D(vertex.GetX() + (CosD(angle2) * height), vertex.GetY() + (SinD(angle2) * height), 0));
return ((Intersect(line, &line1) == true) || (Intersect(line, &line2) == true));
}
return false;
}
bool CircleConeIntersect(const Circle * c, const Cone * cone)
{
Circle circle(cone->GetVertex(), cone->GetHeight());
if (Intersect(c, &circle) == true)
{
if ((c->ContainsPoint(cone->GetVertex()) == true) || (cone->ContainsPoint(c->GetCenter()) == true))
{
return true;
}
Vector3D direction(cone->GetVertex(), cone->GetVertex() + cone->GetDirection());
Vector3D centerDirection(cone->GetVertex(), c->GetCenter());
Float angle = direction.GetZeroAngleD();
Float angleDif = centerDirection.GetZeroAngleD() - angle;
if (AbsVal(angleDif) < cone->GetAngle())
{
return true;
}
Float angle1 = angle + cone->GetAngle();
Float angle2 = angle - cone->GetAngle();
Float height = cone->GetHeight();
Point3D vertex = cone->GetVertex();
LineSegment line1(vertex, Point3D(vertex.GetX() + (CosD(angle1) * height), vertex.GetY() + (SinD(angle1) * height), 0));
LineSegment line2(vertex, Point3D(vertex.GetX() + (CosD(angle2) * height), vertex.GetY() + (SinD(angle2) * height), 0));
return ((Intersect(c, &line1) == true) || (Intersect(c, &line2) == true));
}
return false;
}
void Rectangle::draw(Frame* fr) {
/*
* x1y2-------x2y2
* | |
* | |
* | |
* x1y1-------x2y1
*/
if(x1 > x2 && y1 > y2) {
std::swap(x1, x2);
std::swap(y1, y2);
}
if(is_valid(fr)) {
// Create 4 lines
Line line1(x1, y1, x1, y2);
Line line2(x1, y2, x2, y2);
Line line3(x2, y2, x2, y1);
Line line4(x2, y1, x1, y1);
// Draw them
line1.draw(fr);
line2.draw(fr);
line3.draw(fr);
line4.draw(fr);
} else {
throw std::runtime_error("Rechteck nicht korrekt!");
}
}
void main()
{
ifstream inStream;
int cases;
inStream.open("input.txt");
if(inStream.fail())
{
cerr<<"Input file opening failed\n";
exit(1);
}
inStream>>cases;
for(int i=0;i<cases;i++)
{
int p1x, p2x, p3x, p4x, p1y, p2y, p3y, p4y;
inStream>>p1x>>p1y>>p2x>>p2y>>p3x>>p3y>>p4x>>p4y;
point p1(p1x, p1y), p2(p2x, p2y), p3(p3x, p3y), p4(p4x, p4y);
linesegment line1(p1, p2);
linesegment line2(p3, p4);
if(line1.properintersection(line2) || line2.properintersection(line1))
cout<<"1"<<endl;
else if(line1.improperintersection(line2) || line2.improperintersection(line1))
cout<<"2"<<endl;
else
cout<<"0"<<endl;
}
inStream.close();
}
void Inkscape::LineSnapper::constrainedSnap(SnappedConstraints &sc,
Inkscape::SnapCandidatePoint const &p,
Geom::OptRect const &/*bbox_to_snap*/,
ConstraintLine const &c,
std::vector<SPItem const *> const */*it*/) const
{
if (_snap_enabled == false || _snapmanager->snapprefs.getSnapFrom(p.getSourceType()) == false) {
return;
}
/* Get the lines that we will try to snap to */
const LineList lines = _getSnapLines(p.getPoint());
for (LineList::const_iterator i = lines.begin(); i != lines.end(); i++) {
if (Geom::L2(c.getDirection()) > 0) { // Can't do a constrained snap without a constraint
// constraint line
Geom::Point const point_on_line = c.hasPoint() ? c.getPoint() : p.getPoint();
Geom::Line line1(point_on_line, point_on_line + c.getDirection());
// grid/guide line
Geom::Point const p1 = i->second; // point at guide/grid line
Geom::Point const p2 = p1 + Geom::rot90(i->first); // 2nd point at guide/grid line
Geom::Line line2(p1, p2);
Geom::OptCrossing inters = Geom::OptCrossing(); // empty by default
try
{
inters = Geom::intersection(line1, line2);
}
catch (Geom::InfiniteSolutions e)
{
// We're probably dealing with parallel lines, so snapping doesn't make any sense here
continue; // jump to the next iterator in the for-loop
}
if (inters) {
Geom::Point t = line1.pointAt((*inters).ta);
const Geom::Coord dist = Geom::L2(t - p.getPoint());
if (dist < getSnapperTolerance()) {
// When doing a constrained snap, we're already at an intersection.
// This snappoint is therefore fully constrained, so there's no need
// to look for additional intersections; just return the snapped point
// and forget about the line
_addSnappedPoint(sc, t, dist, p.getSourceType(), p.getSourceNum(), true);
// For any line that's within range, we will also look at it's "point on line" p1. For guides
// this point coincides with its origin; for grids this is of no use, but we cannot
// discern between grids and guides here
Geom::Coord const dist_p1 = Geom::L2(p1 - p.getPoint());
if (dist_p1 < getSnapperTolerance()) {
_addSnappedLinesOrigin(sc, p1, dist_p1, p.getSourceType(), p.getSourceNum(), true);
// Only relevant for guides; grids don't have an origin per line
// Therefore _addSnappedLinesOrigin() will only be implemented for guides
}
}
}
}
}
}
void Sonar2DUtils::DouglasPeucker(const Sonar2DUtils::tBottomLine& bottomLineFt, float epsilon, Sonar2DUtils::tBottomLine& returnResults)
{
const unsigned int minPoints = 3;
if(bottomLineFt.size() < minPoints)
{
returnResults = bottomLineFt;
}
else
{
Sonar2DUtils::tBottomLine lineSegment;
lineSegment.push_back( *bottomLineFt.begin() );
lineSegment.push_back( bottomLineFt.back() );
float dMax = 0.0f;
Sonar2DUtils::tBottomLine::const_iterator iterMax;
Sonar2DUtils::tBottomLine::const_iterator iterEnd = bottomLineFt.begin() + (bottomLineFt.size() - 2);
// Find the point with maximum distance, excluding the first and last point of the segment.
for(Sonar2DUtils::tBottomLine::const_iterator iter=bottomLineFt.begin()+1; iter!=iterEnd; ++iter )
{
float d = ShortestDistanceToSegment( *iter, lineSegment );
if( d > dMax )
{
dMax = d;
iterMax = iter;
}
}
// If max distance is greater than epsilon, recursively simplify
if( dMax > epsilon)
{
// Split up new lines
Sonar2DUtils::tBottomLine line1( bottomLineFt.begin(), (iterMax+1) );
Sonar2DUtils::tBottomLine line2( iterMax, bottomLineFt.end() );
Sonar2DUtils::tBottomLine results1;
DouglasPeucker(line1, epsilon, results1 );
Sonar2DUtils::tBottomLine results2;
DouglasPeucker(line2, epsilon, results2 );
if(results1.size() < minPoints)
{
returnResults.push_back( *results1.begin() );
}
else
{
returnResults = Sonar2DUtils::tBottomLine( results1.begin(), (results1.begin() + results1.size() - 2) );
}
returnResults.insert( returnResults.end(), results2.begin(), results2.end() );
}
else
{
returnResults.push_back( *bottomLineFt.begin() );
returnResults.push_back( bottomLineFt.back() );
}
}
}
LocationPtr ParserBase::getLocation() const {
LocationPtr location(new Location());
location->file = file();
location->line0 = line0();
location->char0 = char0();
location->line1 = line1();
location->char1 = char1();
return location;
}
//在指定列表中查找卡
bool CDlgAddCards::FindCardLine(CCardLine* pLine,vector<CCardLine*> vecLine)
{
if ( !pLine || vecLine.empty())
return false;
switch (m_type)
{
case TYPE_BUS:
case TYPE_GEN:
{
string name1 = pLine->m_card.FindValueByKeyname(_T("NAME"));
double volt1 = std::stod(pLine->m_card.FindValueByKeyname(_T("VOLT")));
CSimpleBus bus1(name1,volt1);
for (vector<CCardLine*>::iterator it = vecLine.begin();
it != vecLine.end();
++it)
{
CCardLine* pLine2 = *it;
if( !pLine2)
continue;
string name2 = pLine2->m_card.FindValueByKeyname(_T("NAME"));
double volt2 = std::stod(pLine2->m_card.FindValueByKeyname(_T("VOLT")));
CSimpleBus bus2(name2,volt2);
if(bus1.IsSameAs(bus2))
return true;
}
}
break;
case TYPE_LINE:
{
string name = pLine->m_card.FindValueByKeyname(_T("NAME"));
double volt = std::stod(pLine->m_card.FindValueByKeyname(_T("VOLT")));
string name1 = pLine->m_card.FindValueByKeyname(_T("NAME1"));
double volt1 = std::stod(pLine->m_card.FindValueByKeyname(_T("VOLT1")));
string circuit = pLine->m_card.FindValueByKeyname(_T("CIRCUIT"));
CSimpleLine line1(name,volt,name1,volt1,circuit);
for (vector<CCardLine*>::iterator it = vecLine.begin();
it != vecLine.end();
++it)
{
CCardLine* pLine2 = *it;
if( !pLine2)
continue;
name = pLine2->m_card.FindValueByKeyname(_T("NAME"));
volt = std::stod(pLine2->m_card.FindValueByKeyname(_T("VOLT")));
name1 = pLine2->m_card.FindValueByKeyname(_T("NAME1"));
volt1 = std::stod(pLine2->m_card.FindValueByKeyname(_T("VOLT1")));
circuit = pLine2->m_card.FindValueByKeyname(_T("CIRCUIT"));
CSimpleLine line2(name,volt,name1,volt1,circuit);
if(line1.IsSameAs(line2))
return true;
}
}
break;
}
return false;
}
FlowOperator::FlowOperator(const int rows, const int cols) : _b(2 * rows * cols, true, 0), _rows(rows), _cols(cols), _cells(rows * cols), FMxD(rows, cols, OPTFLOW_TYPE), FMxd(rows, cols, OPTFLOW_TYPE), FMyD(rows, cols, OPTFLOW_TYPE), FMyd(rows, cols, OPTFLOW_TYPE){
//construct consts
//FMx/Fx const
//FMx contains the FMxD mat on its main diagonal and FMxd on the -cols(in matlab its -rows) diagonal
FArray zeros(_cols, true, 0);
FArray ones(_cols, true, 1);
FArray nones(_cols, true, -1);
/*
0 1 1 1 0 0 0 0
0 1 1 1 -> 1 1 1 1
0 1 1 1 1 1 1 1
0 1 1 1 1 1 1 1
*/
//cv::Mat FMxD(_rows, _cols, OPTFLOW_TYPE);
memcpy(FMxD.ptr<float>(0), zeros.ptr, _cols * sizeof(float));
for(int i = 1; i < _rows; ++i)
memcpy(FMxD.ptr<float>(i), ones.ptr, _cols * sizeof(float));
/*
-1 -1 -1 0 -1 -1 -1 -1
-1 -1 -1 0 -> -1 -1 -1 -1
-1 -1 -1 0 -1 -1 -1 -1
-1 -1 -1 0 0 0 0 0
*/
//cv::Mat FMxd(_rows, _cols, OPTFLOW_TYPE, cv::Scalar(-1)); increases quality
//cv::Mat FMxd(_rows, _cols, OPTFLOW_TYPE);
for(int i = 1; i < _rows; ++i)
memcpy(FMxd.ptr<float>(i), nones.ptr, _cols * sizeof(float));
memcpy(FMxd.ptr<float>(0), zeros.ptr, _cols * sizeof(float));
//FMy/Fy const
/*
0 0 0 0 0 1 1 1
1 1 1 1 -> 0 1 1 1
1 1 1 1 0 1 1 1
1 1 1 1 0 1 1 1
*/
FArray line1(_cols, true, 1);
*(line1.ptr) = 0;
//cv::Mat FMyD(_rows, _cols, OPTFLOW_TYPE);
for(int i = 0; i < _rows; ++i)
memcpy(FMyD.ptr<float>(i), line1.ptr, _cols * sizeof(float));
/*
-1 -1 -1 -1 -1 -1 -1 0
-1 -1 -1 -1 -> -1 -1 -1 0
-1 -1 -1 -1 -1 -1 -1 0
0 0 0 0 -1 -1 -1 0
*/
FArray line2(_cols, true, -1);
*(line2.ptr + _cols - 1) = 0;
//cv::Mat FMyd(_rows, _cols, OPTFLOW_TYPE);
for(int i = 0; i < _rows; ++i)
memcpy(FMyd.ptr<float>(i), line2.ptr, _cols * sizeof(float));
}
void SegmentsTests<dimension>::run()
{
VecD origin1 = random_vec<VecD>();
VecD direction1 = random_vec<VecD>();
geom::Point<dimension> point1( new typename geom::Point<dimension>::EuclideanDriver( random_vec<HomogenousVecD>() ) );
geom::Point<dimension> point2( new typename geom::Point<dimension>::EuclideanDriver( random_vec<HomogenousVecD>() ) );
// Test based on line
geom::Line<dimension> line1( new typename geom::Line<dimension>::EuclideanDriver( origin1, direction1));
double firstIndex = random_float();
double lastIndex = random_float();
SegmentD seg1( new typename SegmentD::LineDriver( &line1, firstIndex, lastIndex ) );
test_segment_validity( seg1 );
GEOM_CHECK_VEC_EQUAL( seg1.firstPoint(), line1.pointAt(firstIndex) );
GEOM_CHECK_VEC_EQUAL( seg1.lastPoint(), line1.pointAt(lastIndex) );
GEOM_CHECK_NULL( geom::angle(seg1, line1 ) );
test_segment( seg1 );
JFR_CHECK( !seg1.isTransformable() );
// Test constructor based on two points
SegmentD seg2( new typename SegmentD::TwoPointsPointerDriver( &point1, &point2 ) );
test_segment_validity( seg2 );
GEOM_CHECK_VEC_EQUAL( seg2.firstPoint(), point1.homogenousCoordinates() );
GEOM_CHECK_VEC_EQUAL( seg2.lastPoint(), point2.homogenousCoordinates() );
test_segment( seg2 );
JFR_CHECK( !seg2.isTransformable() );
// Test constructor based on two points
SegmentD seg3( new typename SegmentD::TwoPointsDriver( point1.homogenousCoordinates(), point2.homogenousCoordinates() ) );
test_segment_validity( seg3 );
GEOM_CHECK_VEC_EQUAL( seg3.firstPoint(), point1.homogenousCoordinates() );
GEOM_CHECK_VEC_EQUAL( seg3.lastPoint(), point2.homogenousCoordinates() );
test_segment( seg3 );
JFR_CHECK( seg3.isTransformable() );
// Test transformability
HomogenousMatrixD m = random_inversible_mat<dimension>();
HomogenousMatrixD mInv;
jmath::ublasExtra::inv( m, mInv );
SegmentD seg3bis = seg3;
seg3bis.applyTransformation( m );
GEOM_CHECK_VEC_EQUAL( seg3bis.firstPoint(), ublas::prod(m, seg3.firstPoint() ) );
GEOM_CHECK_VEC_EQUAL( seg3bis.lastPoint(), ublas::prod(m, seg3.lastPoint() ) );
seg3bis.applyTransformation( mInv );
GEOM_CHECK_VEC_EQUAL( seg3bis.firstPoint(), seg3.firstPoint() );
GEOM_CHECK_VEC_EQUAL( seg3bis.lastPoint(), seg3.lastPoint() );
// Test distance
test_distance(seg1, seg2);
test_distance(seg2, seg3);
test_distance(seg1, seg3);
test_distance(seg1, seg2.support());
test_distance(seg1, seg3.support());
test_distance(seg2, seg1.support());
test_distance(seg2, seg3.support());
test_distance(seg3, seg2.support());
test_distance(seg3, seg1.support());
}
std::string Diagnostics::GetFrameOverlayString(const GPUStats& aStats) {
TimeStamp now = TimeStamp::Now();
unsigned fps = unsigned(mCompositeFps.AddFrameAndGetFps(now));
unsigned txnFps = unsigned(mTransactionFps.GetFPS(now));
float pixelFillRatio =
aStats.mInvalidPixels
? float(aStats.mPixelsFilled) / float(aStats.mInvalidPixels)
: 0.0f;
float screenFillRatio = aStats.mScreenPixels ? float(aStats.mPixelsFilled) /
float(aStats.mScreenPixels)
: 0.0f;
if (aStats.mDrawTime) {
mGPUDrawMs.Add(aStats.mDrawTime.value());
}
std::string gpuTimeString;
if (mGPUDrawMs.Empty()) {
gpuTimeString = "N/A";
} else {
gpuTimeString = nsPrintfCString("%0.1fms", mGPUDrawMs.Average()).get();
}
// DL = nsDisplayListBuilder
// FLB = FrameLayerBuilder
// R = ClientLayerManager::EndTransaction
// CP = ShadowLayerForwarder::EndTransaction (txn build)
// TX = LayerTransactionChild::SendUpdate (IPDL serialize+send)
// UP = LayerTransactionParent::RecvUpdate (IPDL deserialize, update, APZ
// update)
// CC_BUILD = Container prepare/composite frame building
// CC_EXEC = Container render/composite drawing
nsPrintfCString line1("FPS: %d (TXN: %d)", fps, txnFps);
nsPrintfCString line2(
"[CC] Build: %0.1fms Exec: %0.1fms GPU: %s Fill Ratio: %0.1f/%0.1f",
mPrepareMs.Average(), mCompositeMs.Average(), gpuTimeString.c_str(),
pixelFillRatio, screenFillRatio);
nsCString line3;
if (mDlb2Ms.Average() != 0.0f) {
line3 += nsPrintfCString(
"[Content] DL: %0.1f/%0.1fms FLB: %0.1fms Raster: %0.1fms",
mDlb2Ms.Average(), mDlbMs.Average(), mFlbMs.Average(),
mRasterMs.Average());
} else {
line3 += nsPrintfCString(
"[Content] DL: %0.1fms FLB: %0.1fms Raster: %0.1fms", mDlbMs.Average(),
mFlbMs.Average(), mRasterMs.Average());
}
nsPrintfCString line4("[IPDL] Build: %0.1fms Send: %0.1fms Update: %0.1fms",
mSerializeMs.Average(), mSendMs.Average(),
mUpdateMs.Average());
return std::string(line1.get()) + "\n" + std::string(line2.get()) + "\n" +
std::string(line3.get()) + "\n" + std::string(line4.get());
}
LocationPtr ParserBase::getLocation() const {
auto location = std::make_shared<Location>();
location->file = file();
location->line0 = line0();
location->char0 = char0();
location->line1 = line1();
location->char1 = char1();
location->cursor = cursor();
return location;
}
void
MFD::setPage ( MfdPage page )
{
std::string line1(page.getLine1());
std::string line2(page.getLine2());
std::string line3(page.getLine3());
if(isUpdateEnabled) {
MFD::setLine1(line1, true);
MFD::setLine2(line2, true);
MFD::setLine3(line3, true);
}
}
//-----------------------------------------------------------------------
Shape RoundedCornerSpline2::realizeShape()
{
assert(!mPoints.empty());
Shape shape;
unsigned int numPoints = mClosed ? mPoints.size() : (mPoints.size() - 2);
if (!mClosed)
shape.addPoint(mPoints[0]);
for (unsigned int i = 0; i < numPoints; ++i)
{
const Vector2& p0 = safeGetPoint(i);
const Vector2& p1 = safeGetPoint(i+1);
const Vector2& p2 = safeGetPoint(i+2);
Vector2 vBegin = p1-p0;
Vector2 vEnd = p2-p1;
// We're capping the radius if it's too big compared to segment length
Real radius = mRadius;
Real smallestSegLength = std::min(vBegin.length(), vEnd.length());
if (smallestSegLength < 2 * mRadius)
radius = smallestSegLength / 2.0f;
Vector2 pBegin = p1 - vBegin.normalisedCopy() * radius;
Vector2 pEnd = p1 + vEnd.normalisedCopy() * radius;
Line2D line1(pBegin, vBegin.perpendicular());
Line2D line2(pEnd, vEnd.perpendicular());
Vector2 center;
line1.findIntersect(line2, center);
Vector2 vradBegin = pBegin - center;
Vector2 vradEnd = pEnd - center;
Radian angleTotal = Utils::angleBetween(vradBegin, vradEnd);
if (vradBegin.crossProduct(vradEnd)<0)
angleTotal = -angleTotal;
for (unsigned int j=0;j<=mNumSeg;j++)
{
Vector2 deltaVector = Utils::rotateVector2(vradBegin, (Real)j * angleTotal / (Real)mNumSeg);
shape.addPoint(center + deltaVector);
}
}
if (!mClosed)
shape.addPoint(mPoints[mPoints.size()-1]);
if (mClosed)
shape.close();
shape.setOutSide(mOutSide);
return shape;
}
void billing(struct product *pro,int *sel,int *selqty,int n)
{
if(n==0)
{
line1();
printf("\n\n\n Total Payable Bill : %d",total);
printf("\n\n\n Thanks Visit Again!!!");
return;
}
total+=((pro+*(sel))->price)*(*(selqty));
printf("\n\n %-15.15s %-15d %-15d %-15d",(pro+*(sel))->name,(pro+*(sel))->price,*(selqty),((pro+*(sel))->price)*(*(selqty)));
billing(pro,sel+1,selqty+1,n-1);
}
