/**
* Set output hue
*
* @lw_par: logiWIN data
* @hue: output hue in range (-30,30)
*
*/
void logiwin_set_hue(struct logiwin_parameters *lw_par, int hue)
{
static const unsigned int cos_table[31] = {
2048, 2047, 2046, 2045, 2043, 2040, 2036, 2032, 2028, 2022,
2016, 2010, 2003, 1995, 1987, 1978, 1968, 1958, 1947, 1936,
1924, 1911, 1898, 1885, 1870, 1856, 1840, 1824, 1808, 1791,
1773
};
static const unsigned int sin_table[31] = {
0, 35, 71, 107, 142, 178, 214, 249, 285, 320,
355, 390, 425, 460, 495, 530, 564, 598, 632, 666,
700, 733, 767, 800, 832, 865, 897, 929, 961, 992,
1024
};
u32 reg_cos, reg_sin;
if (hue < -30)
hue = -30;
else if (hue > 30)
hue = 30;
lw_par->hue = hue;
reg_cos = (hue < 0) ? cos_table[-hue] : cos_table[hue];
reg_sin = (hue < 0) ? -sin_table[-hue] : sin_table[hue];
logiwin_write32(lw_par, LOGIWIN_COS_HUE_ROFF, reg_cos);
logiwin_write32(lw_par, LOGIWIN_SIN_HUE_ROFF, reg_sin);
}
/**
* Enable/disable logiWIN deinterlacing
*
* @lw_par: logiWIN data
* @enable: enable/disable flag
*
* Note:
* false: "Bob"
* true: "Weave"
*
*/
void logiwin_weave_deinterlace(struct logiwin_parameters *lw_par,
bool weave_deinterlace)
{
if (lw_par->input_format != LOGIWIN_FORMAT_INPUT_ITU)
return;
if (weave_deinterlace) {
lw_par->ctrl |= LOGIWIN_CTRL_WEAVE_DEINTERLACE;
lw_par->out.top /= 2;
lw_par->out.height /= 2;
lw_par->vscale_step *= 2;
} else {
lw_par->ctrl &= ~LOGIWIN_CTRL_WEAVE_DEINTERLACE;
lw_par->out.top *= 2;
lw_par->out.height *= 2;
lw_par->vscale_step = (lw_par->vscale_step / 2) &
((~0) << lw_par->scale_shift);
}
lw_par->weave_deinterlace = weave_deinterlace;
if (lw_par->ctrl & LOGIWIN_CTRL_ENABLE) {
lw_par->ctrl &= ~LOGIWIN_CTRL_ENABLE;
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
udelay(10);
lw_par->ctrl |= LOGIWIN_CTRL_ENABLE;
}
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
}
/**
*
* Switch H sync and V sync polarity
*
* @lw_par: logiWIN data
* @ch: input channel
* @hsync_inv: switch H sync polarity
* @vsync_inv: switch V sync polarity
*
*/
void logiwin_sync_polarity(struct logiwin_parameters *lw_par,
unsigned int ch, bool hsync_inv, bool vsync_inv)
{
if (ch > 1)
return;
if (ch == 0) {
if (hsync_inv)
lw_par->ctrl |= LOGIWIN_HSYNC_INVERT_CH_0;
else
lw_par->ctrl &= ~LOGIWIN_HSYNC_INVERT_CH_0;
if (vsync_inv)
lw_par->ctrl |= LOGIWIN_VSYNC_INVERT_CH_0;
else
lw_par->ctrl &= ~LOGIWIN_VSYNC_INVERT_CH_0;
} else if (ch == 1) {
if (hsync_inv)
lw_par->ctrl |= LOGIWIN_HSYNC_INVERT_CH_1;
else
lw_par->ctrl &= ~LOGIWIN_HSYNC_INVERT_CH_1;
if (vsync_inv)
lw_par->ctrl |= LOGIWIN_VSYNC_INVERT_CH_1;
else
lw_par->ctrl &= ~LOGIWIN_VSYNC_INVERT_CH_1;
}
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
}
/**
*
* Enables or disables logiWIN deinterlacing operation.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param weave_deinterlace is a flag for enabling "weave" deinterlace.
*
* @return None.
*
* @note
* - 0 - "Bob" deinterlace.
* - 1 - "Weave" deinterlace.
*
*****************************************************************************/
void logiwin_enable_weave_deinterlace(struct logiwin_priv *lw,
unsigned char weave_deinterlace)
{
if (lw->input_format != LOGIWIN_ITU)
return;
if (!lw->weave_deinterlace == !weave_deinterlace)
return;
if (weave_deinterlace) {
lw->ctrl |= LOGIWIN_CR_WEAVE_DEINT_MSK;
lw->out_rect.y /= 2;
lw->out_rect.height /= 2;
lw->scale_step_y *= 2;
} else {
lw->ctrl &= (~LOGIWIN_CR_WEAVE_DEINT_MSK);
lw->out_rect.y *= 2;
lw->out_rect.height *= 2;
lw->scale_step_y =
(lw->scale_step_y / 2) & ((~0) << lw->scale_shift_bits);
}
lw->weave_deinterlace = weave_deinterlace;
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
* Enable/disable logiWIN operation
*
* @lw_par: logiWIN data
* @op: logiWIN operation
* @op_flag: logiWIN operation flag
*
*/
void logiwin_operation(struct logiwin_parameters *lw_par,
enum logiwin_operation op,
enum logiwin_operation_flag op_flag)
{
u32 op_mask;
unsigned int us = 0;
switch (op) {
case LOGIWIN_OP_ENABLE:
op_mask = LOGIWIN_CTRL_ENABLE;
break;
case LOGIWIN_OP_EVEN_FIELD_VBUFF_SWITCH:
op_mask = LOGIWIN_CTRL_EVEN_FIELD_VBUFF_SWITCH;
break;
case LOGIWIN_OP_STENCIL_MASK:
op_mask = LOGIWIN_CTRL_STENCIL_MASK;
break;
case LOGIWIN_OP_CPU_VBUFF_SWITCH:
op_mask = LOGIWIN_CTRL_CPU_VBUFF_SWITCH;
break;
case LOGIWIN_OP_FRAME_STORED_STOP:
op_mask = LOGIWIN_CTRL_FRAME_STORE_STOP;
us = 10;
break;
case LOGIWIN_OP_SWIZZLE:
op_mask = LOGIWIN_CTRL_SWIZZLE;
us = 10;
break;
}
if (op_flag == LOGIWIN_OP_FLAG_ENABLE)
lw_par->ctrl |= op_mask;
else if (op_flag == LOGIWIN_OP_FLAG_DISABLE)
lw_par->ctrl &= ~op_mask;
if (us != 0 && (lw_par->ctrl & LOGIWIN_CTRL_ENABLE)) {
lw_par->ctrl &= ~LOGIWIN_CTRL_ENABLE;
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
udelay(us);
lw_par->ctrl |= LOGIWIN_CTRL_ENABLE;
}
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
}
/**
*
* Input Video Channel Selection.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param select is a flag for choosing between two video input streams.
*
* @return None.
*
* @note 0 - logiWIN input channel 0 selected.\n
* 1 - logiWIN input channel 1 selected.
*
*****************************************************************************/
void logiwin_select_input_ch(struct logiwin_priv *lw, unsigned char select)
{
if (select == 1)
lw->ctrl |= LOGIWIN_CR_IN_CH_SEL_MSK;
else
lw->ctrl &= (~LOGIWIN_CR_IN_CH_SEL_MSK);
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
* Enable/disable logiWIN interrupt
*
* @lw_par: logiWIN data
* @mask: interrupt bit mask
*
*/
void logiwin_int(struct logiwin_parameters *lw_par, u32 mask, bool enable)
{
if (enable)
lw_par->int_mask &= ~mask;
else
lw_par->int_mask |= mask;
logiwin_write32(lw_par, LOGIWIN_INT_MASK_ROFF, lw_par->int_mask);
}
/**
*
* Enables/disables logiWIN output image masking operation.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param enable is an enable/disable flag.
*
* @return None.
*
* @note None.
*
*****************************************************************************/
void logiwin_enable_image_masking(struct logiwin_priv *lw, unsigned char enable)
{
if (enable)
lw->ctrl |= LOGIWIN_CR_MASK_ENABLE_MSK;
else
lw->ctrl &= (~LOGIWIN_CR_MASK_ENABLE_MSK);
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
*
* This function is valid only when logiWIN input is configured for
* ITU(interlaced) video stream with double buffering in use.
* It enables video buffer switching after both fields are stored to memory
* i.e. on every even field.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param enable is a flag for enabling switching video buffer on every
* even field.
*
* @return None.
*
* @note None.
*
*****************************************************************************/
void logiwin_logiwin_enable_buff_sw_even_field(struct logiwin_priv *lw,
unsigned char enable)
{
if (enable)
lw->ctrl |= LOGIWIN_CR_SWBUFF_EVEN_FLD_MSK;
else
lw->ctrl &= (~LOGIWIN_CR_SWBUFF_EVEN_FLD_MSK);
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
* Clears logiWIN interrupt status register
*
* @lw_par: logiWIN data
* @mask: interrupt bit mask
*
*/
void logiwin_int_stat_clear(struct logiwin_parameters *lw_par, u32 mask)
{
u32 isr;
if (mask)
isr = mask;
else
isr = ~mask;
logiwin_write32(lw_par, LOGIWIN_INT_STAT_ROFF, isr);
}
/**
* Input video channel selection
*
* @lw_par: logiWIN data
* @ch: channel ID (0, 1)
*
*/
void logiwin_select_input_ch(struct logiwin_parameters *lw_par, unsigned int ch)
{
if (ch == 0)
lw_par->ctrl &= ~LOGIWIN_CTRL_INPUT_SELECT;
else if (ch == 1)
lw_par->ctrl |= LOGIWIN_CTRL_INPUT_SELECT;
else
return;
lw_par->channel_id = ch;
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
}
/**
* Set output contrast
*
* @lw_par: logiWIN data
* @contrast: output contrast in range (-50,50)
*
*/
void logiwin_set_contrast(struct logiwin_parameters *lw_par, int contrast)
{
u32 regval;
if (contrast < -50)
contrast = -50;
else if (contrast > 50)
contrast = 50;
lw_par->contrast = contrast;
regval = 1992 * (contrast + 50) * 2048 / 100000;
logiwin_write32(lw_par, LOGIWIN_CONTRAST_ROFF, regval);
}
/**
* Set output brightness
*
* @lw_par: logiWIN data
* @brightness: output brightness in range (-50,50)
*
*/
void logiwin_set_brightness(struct logiwin_parameters *lw_par, int brightness)
{
u32 regval;
if (brightness < -50)
brightness = -50;
else if (brightness > 50)
brightness = 50;
lw_par->brightness = brightness;
regval = 32 + ((63 * brightness) / 100);
logiwin_write32(lw_par, LOGIWIN_BRIGHTNESS_ROFF, regval);
}
/**
* Write mask stencil to dedicated BRAM registers
*
* @lw_par: logiWIN data
* @mask_buffer: input mask data
* @offset: mask offset
* @length: input mask data length
*
* Note:
* Offset and length must be even values.
*
*/
void logiwin_write_mask_stencil(struct logiwin_parameters *lw_par,
unsigned int *mask_buffer,
unsigned int offset, unsigned int length)
{
unsigned int pos, end, *buff;
if ((offset >= MAX_VMEM_STRIDE) || (offset + length > MAX_VMEM_STRIDE))
return;
pos = LOGIWIN_MASK_BRAM_OFFSET + offset * 2;
end = pos + length * 2;
buff = mask_buffer;
for (; pos < end; pos += 4, buff++)
logiwin_write32(lw_par, pos, *buff);
}
/**
* Set output saturation
*
* @lw_par: logiWIN data
* @saturation: output saturation in range (-50,50)
*
*/
void logiwin_set_saturation(struct logiwin_parameters *lw_par, int saturation)
{
u32 regval;
if (saturation < -50)
saturation = -50;
else if (saturation > 50)
saturation = 50;
lw_par->saturation = saturation;
regval = 1992 * (saturation + 50) * 2048 / 100000;
logiwin_write32(lw_par, LOGIWIN_SATURATION_ROFF, regval);
}
/**
* Set logiWIN frame rate
*
* @lw_par: logiWIN data
* @frame_rate: frame rate
*
* Note:
* Frame rate smaller than full instructs logiWIN to store 75%, 50% or 25%
* of total frames per second.
*
*/
void logiwin_set_frame_rate(struct logiwin_parameters *lw_par,
enum logiwin_frame_rate frame_rate)
{
lw_par->ctrl &= LOGIWIN_FRAME_RATE_MASK_FULL;
switch(frame_rate) {
case LOGIWIN_FRAME_RATE_75:
lw_par->ctrl |= LOGIWIN_FRAME_RATE_MASK_75;
break;
case LOGIWIN_FRAME_RATE_50:
lw_par->ctrl |= LOGIWIN_FRAME_RATE_MASK_50;
break;
case LOGIWIN_FRAME_RATE_25:
lw_par->ctrl |= LOGIWIN_FRAME_RATE_MASK_25;
break;
case LOGIWIN_FRAME_RATE_FULL:
default:
break;
}
logiwin_write32(lw_par, LOGIWIN_CTRL0_ROFF, lw_par->ctrl);
}
/**
*
* Sets logiWIN frame rate.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param frame_rate_sel is a frame rate selector.
*
* @return None.
*
* @note
* frame_rate_sel :
* - FRAME_RATE_FULL - full frame rate
* - FRAME_RATE_75 - 75% frame is stored
* - FRAME_RATE_50 - 50% frame is stored
* - FRAME_RATE_25 - 25% frame is stored
*
*****************************************************************************/
void logiwin_set_frame_rate(struct logiwin_priv *lw,
enum logiwin_frame_rate frame_rate_sel)
{
lw->ctrl &= 0x3F;
switch(frame_rate_sel) {
case FRAME_RATE_FULL:
lw->ctrl |= LOGIWIN_CR_FULL_FR_MSK;
break;
case FRAME_RATE_75:
lw->ctrl |= LOGIWIN_CR_75_FR_MSK;
break;
case FRAME_RATE_50:
lw->ctrl |= LOGIWIN_CR_50_FR_MSK;
break;
case FRAME_RATE_25:
lw->ctrl |= LOGIWIN_CR_25_FR_MSK;
break;
}
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
* Update logiWIN registers
*
* @lw_par: logiWIN data
*
*/
void logiwin_update_registers(struct logiwin_parameters *lw_par)
{
logiwin_write32(lw_par, LOGIWIN_DR_X_ROFF, lw_par->output.dr_x - 1);
logiwin_write32(lw_par, LOGIWIN_DR_Y_ROFF, lw_par->output.dr_y - 1);
logiwin_write32(lw_par, LOGIWIN_UL_X_ROFF, lw_par->output.ul_x);
logiwin_write32(lw_par, LOGIWIN_UL_Y_ROFF, lw_par->output.ul_y);
logiwin_write32(lw_par, LOGIWIN_SCALE_X_ROFF,
(lw_par->hscale_step >> lw_par->scale_shift));
logiwin_write32(lw_par, LOGIWIN_SCALE_Y_ROFF,
(lw_par->vscale_step >> lw_par->scale_shift));
logiwin_write32(lw_par, LOGIWIN_START_X_ROFF,
(lw_par->start_x >> lw_par->scale_shift));
logiwin_write32(lw_par, LOGIWIN_START_Y_ROFF,
(lw_par->start_y >> lw_par->scale_shift));
logiwin_write32(lw_par, LOGIWIN_CROP_X_ROFF, lw_par->crop.left);
logiwin_write32(lw_par, LOGIWIN_CROP_Y_ROFF, lw_par->crop.top);
}
/**
*
* Disable interrupt in logiWIN interrupt mask register.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param mask is a interrupt bit mask.
*
* @return None.
*
* @note None.
*
*****************************************************************************/
void logiwin_mask_int(struct logiwin_priv *lw, unsigned long mask)
{
lw->int_mask |= mask;
logiwin_write32(lw->reg_base, LOGIWIN_INT_MASK_ROFF, lw->int_mask);
}
/**
*
* Sets logiWIN memory offset values.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param even_ptr is a memory pointer for the even field of the processed
* Video input stream.
* @param odd_ptr is a memory pointer for the odd field of the processed Video
* input stream.
*
* @return None.
*
* @note \n For VGA video input or ITU656 in "bob" deinterlace mode only
* even_ptr is used.
* \n odd_ptr is used only when logiWIN has ITU656 as video input and
* is working in "weave" deinterlace mode.
* \n even_ptr defines pointer to the block of video memory where even
* field are stored.
* \n odd_ptr defines pointer to the block of video memory where odd
* field are stored.
*
*****************************************************************************/
void logiwin_set_memory_offset(struct logiwin_priv *lw,
unsigned long even_ptr, unsigned long odd_ptr)
{
logiwin_write32(lw->reg_base, LOGIWIN_MEM_OFFSET_EVEN_ROFF, even_ptr);
logiwin_write32(lw->reg_base, LOGIWIN_MEM_OFFSET_ODD_ROFF, odd_ptr);
}
/**
*
* Stops logiWIN operation.
*
* @param lw is a pointer to the logiWIN device parameter structure.
*
* @return None.
*
* @note None.
*
*****************************************************************************/
void logiwin_stop(struct logiwin_priv *lw)
{
lw->ctrl &= ~(LOGIWIN_CR_ENABLE_MSK);
logiwin_write32(lw->reg_base, LOGIWIN_CTRL0_ROFF, lw->ctrl);
}
/**
* Set logiWIN memory offsets
*
* @lw_par: logiWIN data
* @even_ptr: memory pointer to even field of the video input stream
* @odd_ptr: memory pointer to odd field of the video input stream
*
* Note:
* For VGA or ITU656 in "bob" deinterlace mode video inputs, only even_ptr
* is used.
* For ITU656 video input in "weave" deinterlace mode, additionally odd_ptr
* is used.
* even_ptr defines pointer to the block of video memory where even fields
* are stored.
* odd_ptr defines pointer to the block of video memory where odd fields
* are stored.
*
*/
void logiwin_set_memory_offset(struct logiwin_parameters *lw_par,
u32 even_ptr, u32 odd_ptr)
{
logiwin_write32(lw_par, LOGIWIN_MEM_OFFSET_EVEN_ROFF, even_ptr);
logiwin_write32(lw_par, LOGIWIN_MEM_OFFSET_ODD_ROFF, odd_ptr);
}
/**
* Set logiWIN pixel alpha blending value
*
* @lw_par: logiWIN data
* @alpha: pixel alpha value
*
*/
void logiwin_set_pixel_alpha(struct logiwin_parameters *lw_par, u32 alpha)
{
lw_par->alpha = (u8)alpha;
logiwin_write32(lw_par, LOGIWIN_PIX_ALPHA_ROFF, alpha);
}
/**
*
* Clears logiWIN interrupt status register.
*
* @param lw is a pointer to the logiWIN device parameter structure.
* @param mask is a interrupt bit mask.
*
* @return None.
*
* @note None.
*
*****************************************************************************/
void logiwin_clear_int_stat(struct logiwin_priv *lw, unsigned long mask)
{
logiwin_write32(lw->reg_base, LOGIWIN_INT_STAT_ROFF, mask);
}
