/** \brief Update PHY status from passed value
*
* This function updates the current PHY status based on the
* passed PHY status word. The PHY status indicate if the link
* is active, the connection speed, and duplex.
*
* \param[in] netif NETIF structure
* \param[in] linksts Status word with link state
* \param[in] sdsts Status word with speed and duplex states
* \return 1 if the status has changed, otherwise 0
*/
static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts, u32_t sdsts)
{
s32_t changed = 0;
/* Update link active status */
if (linksts & LAN8_LINK_STATUS)
physts.phy_link_active = 1;
else
physts.phy_link_active = 0;
switch (sdsts & LAN8_SPEEDMASK) {
case LAN8_SPEED100F:
default:
physts.phy_speed_100mbs = 1;
physts.phy_full_duplex = 1;
break;
case LAN8_SPEED10F:
physts.phy_speed_100mbs = 0;
physts.phy_full_duplex = 1;
break;
case LAN8_SPEED100H:
physts.phy_speed_100mbs = 1;
physts.phy_full_duplex = 0;
break;
case LAN8_SPEED10H:
physts.phy_speed_100mbs = 0;
physts.phy_full_duplex = 0;
break;
}
if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
changed = 1;
if (physts.phy_speed_100mbs) {
/* 100MBit mode. */
lpc_emac_set_speed(1);
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
}
else {
/* 10MBit mode. */
lpc_emac_set_speed(0);
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
}
olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
}
if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
changed = 1;
if (physts.phy_full_duplex)
lpc_emac_set_duplex(1);
else
lpc_emac_set_duplex(0);
olddphysts.phy_full_duplex = physts.phy_full_duplex;
}
if (physts.phy_link_active != olddphysts.phy_link_active) {
changed = 1;
#if NO_SYS == 1
if (physts.phy_link_active)
netif_set_link_up(netif);
else
netif_set_link_down(netif);
#else
if (physts.phy_link_active)
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
(void*) netif, 1);
else
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
(void*) netif, 1);
#endif
olddphysts.phy_link_active = physts.phy_link_active;
}
return changed;
}
/** \brief Update PHY status from passed value
*
* This function updates the current PHY status based on the
* passed PHY status word. The PHY status indicate if the link
* is active, the connection speed, and duplex.
*
* \param[in] netif NETIF structure
* \param[in] linksts Status word from PHY
* \return 1 if the status has changed, otherwise 0
*/
static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts)
{
s32_t changed = 0;
/* Update link active status */
if (linksts & DP8_VALID_LINK)
physts.phy_link_active = 1;
else
physts.phy_link_active = 0;
/* Full or half duplex */
if (linksts & DP8_FULLDUPLEX)
physts.phy_full_duplex = 1;
else
physts.phy_full_duplex = 0;
/* Configure 100MBit/10MBit mode. */
if (linksts & DP8_SPEED10MBPS)
physts.phy_speed_100mbs = 0;
else
physts.phy_speed_100mbs = 1;
if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
changed = 1;
if (physts.phy_speed_100mbs) {
/* 100MBit mode. */
lpc_emac_set_speed(1);
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
}
else {
/* 10MBit mode. */
lpc_emac_set_speed(0);
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
}
olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
}
if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
changed = 1;
if (physts.phy_full_duplex)
lpc_emac_set_duplex(1);
else
lpc_emac_set_duplex(0);
olddphysts.phy_full_duplex = physts.phy_full_duplex;
}
if (physts.phy_link_active != olddphysts.phy_link_active) {
changed = 1;
#if NO_SYS == 1
if (physts.phy_link_active)
netif_set_link_up(netif);
else
netif_set_link_down(netif);
#else
if (physts.phy_link_active)
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
(void*) netif, 1);
else
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
(void*) netif, 1);
#endif
olddphysts.phy_link_active = physts.phy_link_active;
}
return changed;
}
