void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version)
{
struct region_device rdev;
check_full_retrain(mupd);
fill_console_params(mupd);
if (CONFIG(SOC_INTEL_GLK))
soc_memory_init_params(mupd);
mainboard_memory_init_params(mupd);
parse_devicetree_setting(mupd);
/* Do NOT let FSP do any GPIO pad configuration */
mupd->FspmConfig.PreMemGpioTablePtr = (uintptr_t) NULL;
/*
* Tell CSE we do not need to use Ring Buffer Protocol (RBP) to fetch
* firmware for us if we are using memory-mapped SPI. This lets CSE
* state machine transition to next boot state, so that it can function
* as designed.
*/
mupd->FspmConfig.SkipCseRbp =
CONFIG(BOOT_DEVICE_MEMORY_MAPPED);
/*
* Converged Security Engine (CSE) has secure storage functionality.
* HECI2 device can be used to access that functionality. However, part
* of S3 resume flow involves resetting HECI2 which takes 136ms. Since
* coreboot does not use secure storage functionality, instruct FSP to
* skip HECI2 reset.
*/
mupd->FspmConfig.EnableS3Heci2 = 0;
/*
* Apollolake splits MRC cache into two parts: constant and variable.
* The constant part is not expected to change often and variable is.
* Currently variable part consists of parameters that change on cold
* boots such as scrambler seed and some memory controller registers.
* Scrambler seed is vital for S3 resume case because attempt to use
* wrong/missing key renders DRAM contents useless.
*/
if (mrc_cache_get_current(MRC_VARIABLE_DATA, version, &rdev) == 0) {
/* Assume leaking is ok. */
assert(CONFIG(BOOT_DEVICE_MEMORY_MAPPED));
mupd->FspmConfig.VariableNvsBufferPtr = rdev_mmap_full(&rdev);
}
car_set_var(fsp_version, version);
}
void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version)
{
const struct mrc_saved_data *msd;
fill_console_params(mupd);
mainboard_memory_init_params(mupd);
/* Do NOT let FSP do any GPIO pad configuration */
mupd->FspmConfig.PreMemGpioTablePtr = (uintptr_t) NULL;
/*
* Tell CSE we do not need to use Ring Buffer Protocol (RBP) to fetch
* firmware for us if we are using memory-mapped SPI. This lets CSE
* state machine transition to next boot state, so that it can function
* as designed.
*/
mupd->FspmConfig.SkipCseRbp =
IS_ENABLED(CONFIG_BOOT_DEVICE_MEMORY_MAPPED);
/*
* Converged Security Engine (CSE) has secure storage functionality.
* HECI2 device can be used to access that functionality. However, part
* of S3 resume flow involves resetting HECI2 which takes 136ms. Since
* coreboot does not use secure storage functionality, instruct FSP to
* skip HECI2 reset.
*/
mupd->FspmConfig.EnableS3Heci2 = 0;
/*
* Apollolake splits MRC cache into two parts: constant and variable.
* The constant part is not expected to change often and variable is.
* Currently variable part consists of parameters that change on cold
* boots such as scrambler seed and some memory controller registers.
* Scrambler seed is vital for S3 resume case because attempt to use
* wrong/missing key renders DRAM contents useless.
*/
if (mrc_cache_get_vardata(&msd, version) < 0) {
printk(BIOS_DEBUG, "MRC variable data missing/invalid\n");
} else {
mupd->FspmConfig.VariableNvsBufferPtr = (void*) msd->data;
}
car_set_var(fsp_version, version);
}
void platform_fsp_memory_init_params_cb(struct FSPM_UPD *mupd)
{
const struct mrc_saved_data *mrc_cache;
struct FSPM_ARCH_UPD *arch_upd = &mupd->FspmArchUpd;
struct chipset_power_state *ps = car_get_var_ptr(&power_state);
int prev_sleep_state = chipset_prev_sleep_state(ps);
fill_console_params(mupd);
mainboard_memory_init_params(mupd);
/* Do NOT let FSP do any GPIO pad configuration */
mupd->FspmConfig.PreMemGpioTablePtr = (uintptr_t) NULL;
/* Reserve enough memory under TOLUD to save CBMEM header */
mupd->FspmArchUpd.BootLoaderTolumSize = cbmem_overhead_size();
/*
* FSPM_UPD passed here is populated with default values provided by
* the blob itself. We let FSPM use top of CAR region of the size it
* requests.
* TODO: add checks to avoid overlap/conflict of CAR usage.
*/
mupd->FspmArchUpd.StackBase = _car_region_end -
mupd->FspmArchUpd.StackSize;
arch_upd->BootMode = FSP_BOOT_WITH_FULL_CONFIGURATION;
if (IS_ENABLED(CONFIG_CACHE_MRC_SETTINGS)) {
if (!mrc_cache_get_current_with_version(&mrc_cache, 0)) {
/* MRC cache found */
arch_upd->NvsBufferPtr = (void *)mrc_cache->data;
arch_upd->BootMode =
prev_sleep_state == SLEEP_STATE_S3 ?
FSP_BOOT_ON_S3_RESUME:
FSP_BOOT_ASSUMING_NO_CONFIGURATION_CHANGES;
printk(BIOS_DEBUG, "MRC cache found, size %x bootmode:%d\n",
mrc_cache->size, arch_upd->BootMode);
} else
printk(BIOS_DEBUG, "MRC cache was not found\n");
}
}
void platform_fsp_memory_init_params_cb(struct FSPM_UPD *mupd)
{
fill_console_params(mupd);
mainboard_memory_init_params(mupd);
/* Do NOT let FSP do any GPIO pad configuration */
mupd->FspmConfig.GpioPadInitTablePtr = NULL;
/*
* At FIT_POINTER there is an address that points to FIT. Even though it
* is technically 64bit value we know only 32bit address is used.
*/
mupd->FspmConfig.FitTablePtr = read32((void*) FIT_POINTER);
/* Reserve enough memory under TOLUD to save CBMEM header */
mupd->FspmArchUpd.BootLoaderTolumSize = cbmem_overhead_size();
/*
* FSPM_UPD passed here is populated with default values provided by
* the blob itself. We let FSPM use top of CAR region of the size it
* requests.
* TODO: add checks to avoid overlap/conflict of CAR usage.
*/
mupd->FspmArchUpd.StackBase = _car_region_end -
mupd->FspmArchUpd.StackSize;
}
void raminit(struct romstage_params *params)
{
const EFI_GUID bootldr_tolum_guid = FSP_BOOTLOADER_TOLUM_HOB_GUID;
EFI_HOB_RESOURCE_DESCRIPTOR *cbmem_root;
FSP_INFO_HEADER *fsp_header;
EFI_HOB_RESOURCE_DESCRIPTOR *fsp_memory;
FSP_MEMORY_INIT fsp_memory_init;
FSP_MEMORY_INIT_PARAMS fsp_memory_init_params;
const EFI_GUID fsp_reserved_guid =
FSP_RESERVED_MEMORY_RESOURCE_HOB_GUID;
void *fsp_reserved_memory_area;
FSP_INIT_RT_COMMON_BUFFER fsp_rt_common_buffer;
void *hob_list_ptr;
FSP_SMBIOS_MEMORY_INFO *memory_info_hob;
const EFI_GUID memory_info_hob_guid = FSP_SMBIOS_MEMORY_INFO_GUID;
MEMORY_INIT_UPD memory_init_params;
const EFI_GUID mrc_guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID;
u32 *mrc_hob;
u32 fsp_reserved_bytes;
MEMORY_INIT_UPD *original_params;
struct pei_data *pei_ptr;
EFI_STATUS status;
VPD_DATA_REGION *vpd_ptr;
UPD_DATA_REGION *upd_ptr;
int fsp_verification_failure = 0;
#if IS_ENABLED(CONFIG_DISPLAY_HOBS)
unsigned long int data;
EFI_PEI_HOB_POINTERS hob_ptr;
#endif
/*
* Find and copy the UPD region to the stack so the platform can modify
* the settings if needed. Modifications to the UPD buffer are done in
* the platform callback code. The platform callback code is also
* responsible for assigning the UpdDataRngPtr to this buffer if any
* updates are made. The default state is to leave the UpdDataRngPtr
* set to NULL. This indicates that the FSP code will use the UPD
* region in the FSP binary.
*/
post_code(0x34);
fsp_header = params->chipset_context;
vpd_ptr = (VPD_DATA_REGION *)(fsp_header->CfgRegionOffset +
fsp_header->ImageBase);
printk(BIOS_DEBUG, "VPD Data: 0x%p\n", vpd_ptr);
upd_ptr = (UPD_DATA_REGION *)(vpd_ptr->PcdUpdRegionOffset +
fsp_header->ImageBase);
printk(BIOS_DEBUG, "UPD Data: 0x%p\n", upd_ptr);
original_params = (void *)((u8 *)upd_ptr +
upd_ptr->MemoryInitUpdOffset);
memcpy(&memory_init_params, original_params,
sizeof(memory_init_params));
/* Zero fill RT Buffer data and start populating fields. */
memset(&fsp_rt_common_buffer, 0, sizeof(fsp_rt_common_buffer));
pei_ptr = params->pei_data;
if (pei_ptr->boot_mode == SLEEP_STATE_S3) {
fsp_rt_common_buffer.BootMode = BOOT_ON_S3_RESUME;
} else if (pei_ptr->saved_data != NULL) {
fsp_rt_common_buffer.BootMode =
BOOT_ASSUMING_NO_CONFIGURATION_CHANGES;
} else {
fsp_rt_common_buffer.BootMode = BOOT_WITH_FULL_CONFIGURATION;
}
fsp_rt_common_buffer.UpdDataRgnPtr = &memory_init_params;
fsp_rt_common_buffer.BootLoaderTolumSize = cbmem_overhead_size();
/* Get any board specific changes */
fsp_memory_init_params.NvsBufferPtr = (void *)pei_ptr->saved_data;
fsp_memory_init_params.RtBufferPtr = &fsp_rt_common_buffer;
fsp_memory_init_params.HobListPtr = &hob_list_ptr;
/* Update the UPD data */
soc_memory_init_params(params, &memory_init_params);
mainboard_memory_init_params(params, &memory_init_params);
if (IS_ENABLED(CONFIG_MMA))
setup_mma(&memory_init_params);
post_code(0x36);
/* Display the UPD data */
if (IS_ENABLED(CONFIG_DISPLAY_UPD_DATA))
soc_display_memory_init_params(original_params,
&memory_init_params);
/* Call FspMemoryInit to initialize RAM */
fsp_memory_init = (FSP_MEMORY_INIT)(fsp_header->ImageBase
+ fsp_header->FspMemoryInitEntryOffset);
printk(BIOS_DEBUG, "Calling FspMemoryInit: 0x%p\n", fsp_memory_init);
printk(BIOS_SPEW, " 0x%p: NvsBufferPtr\n",
fsp_memory_init_params.NvsBufferPtr);
printk(BIOS_SPEW, " 0x%p: RtBufferPtr\n",
fsp_memory_init_params.RtBufferPtr);
printk(BIOS_SPEW, " 0x%p: HobListPtr\n",
fsp_memory_init_params.HobListPtr);
timestamp_add_now(TS_FSP_MEMORY_INIT_START);
post_code(POST_FSP_MEMORY_INIT);
status = fsp_memory_init(&fsp_memory_init_params);
post_code(0x37);
timestamp_add_now(TS_FSP_MEMORY_INIT_END);
printk(BIOS_DEBUG, "FspMemoryInit returned 0x%08x\n", status);
if (status != EFI_SUCCESS)
die("ERROR - FspMemoryInit failed to initialize memory!\n");
/* Locate the FSP reserved memory area */
fsp_reserved_bytes = 0;
fsp_memory = get_next_resource_hob(&fsp_reserved_guid, hob_list_ptr);
if (fsp_memory == NULL) {
fsp_verification_failure = 1;
printk(BIOS_DEBUG,
"7.2: FSP_RESERVED_MEMORY_RESOURCE_HOB missing!\n");
} else {
fsp_reserved_bytes = fsp_memory->ResourceLength;
printk(BIOS_DEBUG, "Reserving 0x%016lx bytes for FSP\n",
(unsigned long int)fsp_reserved_bytes);
}
/* Display SMM area */
#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
char *smm_base;
size_t smm_size;
smm_region((void **)&smm_base, &smm_size);
printk(BIOS_DEBUG, "0x%08x: smm_size\n", (unsigned int)smm_size);
printk(BIOS_DEBUG, "0x%p: smm_base\n", smm_base);
#endif
/* Migrate CAR data */
printk(BIOS_DEBUG, "0x%p: cbmem_top\n", cbmem_top());
if (pei_ptr->boot_mode != SLEEP_STATE_S3) {
cbmem_initialize_empty_id_size(CBMEM_ID_FSP_RESERVED_MEMORY,
fsp_reserved_bytes);
} else if (cbmem_initialize_id_size(CBMEM_ID_FSP_RESERVED_MEMORY,
fsp_reserved_bytes)) {
#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME)
printk(BIOS_DEBUG, "Failed to recover CBMEM in S3 resume.\n");
/* Failed S3 resume, reset to come up cleanly */
hard_reset();
#endif
}
/* Save the FSP runtime parameters. */
fsp_set_runtime(fsp_header, hob_list_ptr);
/* Lookup the FSP_BOOTLOADER_TOLUM_HOB */
cbmem_root = get_next_resource_hob(&bootldr_tolum_guid, hob_list_ptr);
if (cbmem_root == NULL) {
fsp_verification_failure = 1;
printk(BIOS_ERR, "7.4: FSP_BOOTLOADER_TOLUM_HOB missing!\n");
printk(BIOS_ERR, "BootLoaderTolumSize: 0x%08x bytes\n",
fsp_rt_common_buffer.BootLoaderTolumSize);
}
/* Locate the FSP_SMBIOS_MEMORY_INFO HOB */
memory_info_hob = get_next_guid_hob(&memory_info_hob_guid,
hob_list_ptr);
if (NULL == memory_info_hob) {
printk(BIOS_ERR, "FSP_SMBIOS_MEMORY_INFO HOB missing!\n");
fsp_verification_failure = 1;
} else {
printk(BIOS_DEBUG,
"FSP_SMBIOS_MEMORY_INFO HOB: 0x%p\n",
memory_info_hob);
}
#if IS_ENABLED(CONFIG_DISPLAY_HOBS)
if (hob_list_ptr == NULL)
die("ERROR - HOB pointer is NULL!\n");
/*
* Verify that FSP is generating the required HOBs:
* 7.1: FSP_BOOTLOADER_TEMP_MEMORY_HOB only produced for FSP 1.0
* 7.2: FSP_RESERVED_MEMORY_RESOURCE_HOB verified above
* 7.3: FSP_NON_VOLATILE_STORAGE_HOB verified below
* 7.4: FSP_BOOTLOADER_TOLUM_HOB verified above
* 7.5: EFI_PEI_GRAPHICS_INFO_HOB produced by SiliconInit
* FSP_SMBIOS_MEMORY_INFO HOB verified above
*/
if (NULL != cbmem_root) {
printk(BIOS_DEBUG,
"7.4: FSP_BOOTLOADER_TOLUM_HOB: 0x%p\n",
cbmem_root);
data = cbmem_root->PhysicalStart;
printk(BIOS_DEBUG, " 0x%016lx: PhysicalStart\n", data);
data = cbmem_root->ResourceLength;
printk(BIOS_DEBUG, " 0x%016lx: ResourceLength\n", data);
}
hob_ptr.Raw = get_next_guid_hob(&mrc_guid, hob_list_ptr);
if (NULL == hob_ptr.Raw) {
printk(BIOS_ERR, "7.3: FSP_NON_VOLATILE_STORAGE_HOB missing!\n");
fsp_verification_failure =
(params->pei_data->saved_data == NULL) ? 1 : 0;
} else {
printk(BIOS_DEBUG,
"7.3: FSP_NON_VOLATILE_STORAGE_HOB: 0x%p\n",
hob_ptr.Raw);
}
if (fsp_memory != NULL) {
printk(BIOS_DEBUG,
"7.2: FSP_RESERVED_MEMORY_RESOURCE_HOB: 0x%p\n",
fsp_memory);
data = fsp_memory->PhysicalStart;
printk(BIOS_DEBUG, " 0x%016lx: PhysicalStart\n", data);
data = fsp_memory->ResourceLength;
printk(BIOS_DEBUG, " 0x%016lx: ResourceLength\n", data);
}
/* Verify all the HOBs are present */
if (fsp_verification_failure)
printk(BIOS_DEBUG,
"ERROR - Missing one or more required FSP HOBs!\n");
/* Display the HOBs */
print_hob_type_structure(0, hob_list_ptr);
#endif
/* Get the address of the CBMEM region for the FSP reserved memory */
fsp_reserved_memory_area = cbmem_find(CBMEM_ID_FSP_RESERVED_MEMORY);
printk(BIOS_DEBUG, "0x%p: fsp_reserved_memory_area\n",
fsp_reserved_memory_area);
/* Verify the order of CBMEM root and FSP memory */
if ((fsp_memory != NULL) && (cbmem_root != NULL) &&
(cbmem_root->PhysicalStart <= fsp_memory->PhysicalStart)) {
fsp_verification_failure = 1;
printk(BIOS_DEBUG,
"ERROR - FSP reserved memory above CBMEM root!\n");
}
/* Verify that the FSP memory was properly reserved */
if ((fsp_memory != NULL) && ((fsp_reserved_memory_area == NULL) ||
(fsp_memory->PhysicalStart !=
(unsigned int)fsp_reserved_memory_area))) {
fsp_verification_failure = 1;
printk(BIOS_DEBUG, "ERROR - Reserving FSP memory area!\n");
#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
if (cbmem_root != NULL) {
size_t delta_bytes = (unsigned int)smm_base
- cbmem_root->PhysicalStart
- cbmem_root->ResourceLength;
printk(BIOS_DEBUG,
"0x%08x: Chipset reserved bytes reported by FSP\n",
(unsigned int)delta_bytes);
die("Please verify the chipset reserved size\n");
}
#endif
}
/* Verify the FSP 1.1 HOB interface */
if (fsp_verification_failure)
die("ERROR - Coreboot's requirements not met by FSP binary!\n");
/* Display the memory configuration */
report_memory_config();
/* Locate the memory configuration data to speed up the next reboot */
mrc_hob = get_next_guid_hob(&mrc_guid, hob_list_ptr);
if (mrc_hob == NULL)
printk(BIOS_DEBUG,
"Memory Configuration Data Hob not present\n");
else {
pei_ptr->data_to_save = GET_GUID_HOB_DATA(mrc_hob);
pei_ptr->data_to_save_size = ALIGN(
((u32)GET_HOB_LENGTH(mrc_hob)), 16);
}
}