Exemple #1
0
int arch_loader_parse_elf_executable(void *mem, struct file *file, addr_t *start, addr_t *end)
{
	uint32_t i, x;
	addr_t entry;
	elf_header_t *eh = (elf_header_t *)mem;
	uint8_t buffer[(eh->phnum+1)*eh->phsize];
	fs_file_pread(file, eh->phoff, buffer, eh->phsize * eh->phnum);
	uint64_t vaddr=0, length=0, offset=0, stop, tmp;
	uint64_t max=0, min=~0;
	for(i=0;i < eh->phnum;i++)
	{
		elf64_program_header_t *ph = (elf64_program_header_t *)(buffer + (i*eh->phsize));
		
		if((ph->p_addr + ph->p_memsz) > max)
			max = ph->p_addr + ph->p_memsz;
		if(ph->p_addr < min)
			min = ph->p_addr;
		
		if(ph->p_type == PH_LOAD) {
			/* mmap program headers. if the memsz is the same as the filesz, we don't have
			 * to do anything special. if not, then we might need additional mappings: the
			 * file is mapped to some section of the program header's region, and then the
			 * rest is MAP_ANONYMOUS memory. if it fits in the end of the page for the file
			 * mapped memory, then it can fit there. otherwise, we call mmap again.
			 *
			 * also, the actual section we want might be offset from a page. handle that as
			 * well, with inpage_offset.
			 */
			size_t additional = ph->p_memsz - ph->p_filesz;
			size_t inpage_offset = ph->p_addr & (~PAGE_MASK);
			addr_t newend = (ph->p_addr + ph->p_filesz);
			size_t page_free = PAGE_SIZE - (newend % PAGE_SIZE);
			
			int prot = 0;
			if(ph->p_flags & ELF_PF_R)
				prot |= PROT_READ;
			if(ph->p_flags & ELF_PF_W)
				prot |= PROT_WRITE;
			if(ph->p_flags & ELF_PF_X)
				prot |= PROT_EXEC;

			int flags = MAP_FIXED;
			if(prot & PROT_WRITE)
				flags |= MAP_PRIVATE;
			else
				flags |= MAP_SHARED;
			mm_mmap(ph->p_addr & PAGE_MASK, ph->p_filesz + inpage_offset, 
					prot, flags, file, ph->p_offset & PAGE_MASK, 0);
			if(additional > page_free) {
				mm_mmap((newend & PAGE_MASK) + PAGE_SIZE, additional - page_free,
						prot, flags | MAP_ANONYMOUS, 0, 0, 0);
			}
		}
	}
	if(!max)
		return 0;
	*start = eh->entry;
	*end = (max & PAGE_MASK) + PAGE_SIZE;
	return 1;
}
Exemple #2
0
void __init_entry(void)
{
	/* the kernel doesn't have this mapping, so we have to create it here. */
	tm_thread_raise_flag(current_thread, THREAD_KERNEL);
	addr_t ret = mm_mmap(current_thread->usermode_stack_start, CONFIG_STACK_PAGES * PAGE_SIZE,
			PROT_READ | PROT_WRITE, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, 0, 0, 0);
	tm_thread_lower_flag(current_thread, THREAD_KERNEL);
	tm_thread_user_mode_jump(user_mode_init);
}
Exemple #3
0
void tls_init()
{
    mm_mmap(TLS_DATA_BASE, sizeof(struct tls_data), PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, 0, NULL, 0);
    for (int i = 0; i < TLS_KERNEL_ENTRY_COUNT; i++)
    {
        tls->kernel_entries[i] = TlsAlloc();
        log_info("Allocated kernel TLS entry, entry: %d, slot: %d, fs offset 0x%x\n", i, tls->kernel_entries[i], tls_slot_to_offset(tls->kernel_entries[i]));
    }
}
Exemple #4
0
static void preexec(void)
{
	struct thread *t = current_thread;
	/* unmap all mappings, specified by POSIX */
	mm_destroy_all_mappings(t->process);
	mm_virtual_map(MEMMAP_SYSGATE_ADDRESS, sysgate_page, PAGE_PRESENT | PAGE_USER, PAGE_SIZE);
	/* we need to re-create the vmem for memory mappings */
	valloc_create(&(t->process->mmf_valloc), MEMMAP_MMAP_BEGIN, MEMMAP_MMAP_END, PAGE_SIZE, 0);
	addr_t ret = mm_mmap(t->usermode_stack_start, CONFIG_STACK_PAGES * PAGE_SIZE,
			PROT_READ | PROT_WRITE, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, 0, 0, 0);
	mm_page_fault_test_mappings(t->usermode_stack_end - PAGE_SIZE, PF_CAUSE_USER | PF_CAUSE_WRITE);
	t->signal = t->signals_pending = 0;
	memset((void *)t->process->signal_act, 0, sizeof(struct sigaction) * NUM_SIGNALS);

	if(t->flags & THREAD_PTRACED) {
		tm_signal_send_thread(t, SIGTRAP);
	}
}
Exemple #5
0
static struct bucket *alloc_bucket(int objsize)
{
	struct bucket *b = mm_mmap(NULL, BLOCK_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE,
		INTERNAL_MAP_TOPDOWN | INTERNAL_MAP_NORESET | INTERNAL_MAP_COPYONFORK, NULL, 0);
	b->ref_cnt = 0;
	b->next_bucket = NULL;

	/* Set up the chain of free objects */
	char *c = (char *)b + ALIGN(sizeof(struct bucket), sizeof(void *)); /* Align to machine word size */
	b->first_free = c;
	while (c + objsize < (char *)b + BLOCK_SIZE)
	{
		*(char **)c = c + objsize;
		c += objsize;
	}
	*(char **)c = NULL;
	return b;
}
Exemple #6
0
int do_exec(char *path, char **argv, char **env, int shebanged /* oh my */)
{
	unsigned int i=0;
	addr_t end, eip;
	unsigned int argc=0, envc=0;
	char **backup_argv=0, **backup_env=0;
	/* Sanity */
	if(!path || !*path)
		return -EINVAL;
	/* Load the file, and make sure that it is valid and accessible */
	if(EXEC_LOG == 2) 
		printk(0, "[%d]: Checking executable file (%s)\n", current_process->pid, path);
	struct file *efil;
	int err_open;
	efil = fs_file_open(path, _FREAD, 0, &err_open);
	if(!efil)
		return err_open;
	/* are we allowed to execute it? */
	if(!vfs_inode_check_permissions(efil->inode, MAY_EXEC, 0))
	{
		file_put(efil);
		return -EACCES;
	}
	/* is it a valid elf? */
	int header_size = 0;
#if CONFIG_ARCH == TYPE_ARCH_X86_64
	header_size = sizeof(elf64_header_t);
#elif CONFIG_ARCH == TYPE_ARCH_X86
	header_size = sizeof(elf32_header_t);
#endif
	/* read in the ELF header, and check if it's a shebang */
	if(header_size < 2) header_size = 2;
	unsigned char mem[header_size];
	fs_file_pread(efil, 0, mem, header_size);
	
	if(__is_shebang(mem))
		return loader_do_shebang(efil, argv, env);
	
	int other_bitsize=0;
	if(!is_valid_elf(mem, 2) && !other_bitsize) {
		file_put(efil);
		return -ENOEXEC;
	}
	
	if(EXEC_LOG == 2) 
		printk(0, "[%d]: Copy data\n", current_process->pid);
	/* okay, lets back up argv and env so that we can
	 * clear out the address space and not lose data...
	 * If this call if coming from a shebang, then we don't check the pointers,
	 * since they won't be from userspace */
	size_t total_args_len = 0;
	if((shebanged || mm_is_valid_user_pointer(SYS_EXECVE, argv, 0)) && argv) {
		while((shebanged || mm_is_valid_user_pointer(SYS_EXECVE, argv[argc], 0)) && argv[argc] && *argv[argc])
			argc++;
		backup_argv = (char **)kmalloc(sizeof(addr_t) * argc);
		for(i=0;i<argc;i++) {
			backup_argv[i] = (char *)kmalloc(strlen(argv[i]) + 1);
			_strcpy(backup_argv[i], argv[i]);
			total_args_len += strlen(argv[i])+1 + sizeof(char *);
		}
	}
	if((shebanged || mm_is_valid_user_pointer(SYS_EXECVE, env, 0)) && env) {
		while((shebanged || mm_is_valid_user_pointer(SYS_EXECVE, env[envc], 0)) && env[envc] && *env[envc]) envc++;
		backup_env = (char **)kmalloc(sizeof(addr_t) * envc);
		for(i=0;i<envc;i++) {
			backup_env[i] = (char *)kmalloc(strlen(env[i]) + 1);
			_strcpy(backup_env[i], env[i]);
			total_args_len += strlen(env[i])+1 + sizeof(char *);
		}
	}
	total_args_len += 2 * sizeof(char *);
	/* and the path too! */
	char *path_backup = (char *)kmalloc(strlen(path) + 1);
	_strcpy((char *)path_backup, path);
	path = path_backup;
	
	/* Preexec - This is the point of no return. Here we close out unneeded 
	 * file descs, free up the page directory and clear up the resources 
	 * of the task */
	if(EXEC_LOG)
		printk(0, "Executing (p%dt%d, cpu %d, tty %d): %s\n", current_process->pid, current_thread->tid, current_thread->cpu->knum, current_process->pty ? current_process->pty->num : 0, path);
	preexec();
	
	/* load in the new image */
	strncpy((char *)current_process->command, path, 128);
	if(!loader_parse_elf_executable(mem, efil, &eip, &end))
		eip=0;
	/* do setuid and setgid */
	if(efil->inode->mode & S_ISUID) {
		current_process->effective_uid = efil->inode->uid;
	}
	if(efil->inode->mode & S_ISGID) {
		current_process->effective_gid = efil->inode->gid;
	}
	/* we don't need the file anymore, close it out */
	file_put(efil);
	file_close_cloexec();
	if(!eip) {
		printk(5, "[exec]: Tried to execute an invalid ELF file!\n");
		free_dp(backup_argv, argc);
		free_dp(backup_env, envc);
		kfree(path);
		tm_thread_exit(0);
	}
	
	if(EXEC_LOG == 2) 
		printk(0, "[%d]: Updating task values\n", current_process->pid);
	/* Setup the task with the proper values (libc malloc stack) */
	addr_t end_l = end;
	end = ((end-1)&PAGE_MASK) + PAGE_SIZE;
	total_args_len += PAGE_SIZE;
	/* now we need to copy back the args and env into userspace
	 * writeable memory...yippie. */
	addr_t args_start = end + PAGE_SIZE;
	addr_t env_start = args_start;
	addr_t alen = 0;
	mm_mmap(end, total_args_len,
			PROT_READ | PROT_WRITE, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, 0, 0, 0);
	if(backup_argv) {
		memcpy((void *)args_start, backup_argv, sizeof(addr_t) * argc);
		alen += sizeof(addr_t) * argc;
		*(addr_t *)(args_start + alen) = 0; /* set last argument value to zero */
		alen += sizeof(addr_t);
		argv = (char **)args_start;
		for(i=0;i<argc;i++)
		{
			char *old = argv[i];
			char *new = (char *)(args_start+alen);
			unsigned len = strlen(old) + 4;
			argv[i] = new;
			_strcpy(new, old);
			kfree(old);
			alen += len;
		}
		kfree(backup_argv);
	}
	env_start = args_start + alen;
	alen = 0;
	if(backup_env) {
		memcpy((void *)env_start, backup_env, sizeof(addr_t) * envc);
		alen += sizeof(addr_t) * envc;
		*(addr_t *)(env_start + alen) = 0; /* set last argument value to zero */
		alen += sizeof(addr_t);
		env = (char **)env_start;
		for(i=0;i<envc;i++)
		{
			char *old = env[i];
			char *new = (char *)(env_start+alen);
			unsigned len = strlen(old) + 1;
			env[i] = new;
			_strcpy(new, old);
			kfree(old);
			alen += len;
		}
		kfree(backup_env);
	}
	end = (env_start + alen) & PAGE_MASK;
	current_process->env = env;
	current_process->argv = argv;
	kfree(path);
	
	/* set the heap locations, and map in the start */
	current_process->heap_start = current_process->heap_end = end + PAGE_SIZE*2;
	addr_t ret = mm_mmap(end + PAGE_SIZE, PAGE_SIZE,
			PROT_READ | PROT_WRITE, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, 0, 0, 0);
	/* now, we just need to deal with the syscall return stuff. When the syscall
	 * returns, it'll just jump into the entry point of the new process */
	tm_thread_lower_flag(current_thread, THREAD_SCHEDULE);
	/* the kernel cares if it has executed something or not */
	if(!(kernel_state_flags & KSF_HAVEEXECED))
		set_ksf(KSF_HAVEEXECED);
	arch_loader_exec_initializer(argc, eip);
	if(EXEC_LOG == 2) 
		printk(0, "[%d]: Performing call\n", current_process->pid);
	return 0;
}
Exemple #7
0
void main()
{
	win7compat_init();
	log_init();
	fork_init();
	/* fork_init() will directly jump to restored thread context if we are a fork child */

	mm_init();
	flags_init();

	/* Parse command line */
	const char *cmdline = GetCommandLineA();
	int len = strlen(cmdline);
	if (len > BLOCK_SIZE) /* TODO: Test if there is sufficient space for argv[] array */
	{
		init_subsystems();
		kprintf("Command line too long.\n");
		process_exit(1, 0);
	}

	startup = mm_mmap(NULL, BLOCK_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS,
		INTERNAL_MAP_TOPDOWN | INTERNAL_MAP_NORESET | INTERNAL_MAP_VIRTUALALLOC, NULL, 0);
	*(uintptr_t*) startup = 1;
	char *current_startup_base = startup + sizeof(uintptr_t);
	memcpy(current_startup_base, cmdline, len + 1);
	char *envbuf = (char *)ALIGN_TO(current_startup_base + len + 1, sizeof(void*));
	char *env0 = envbuf;
	ENV("TERM=xterm");
	char *env1 = envbuf;
	ENV("HOME=/root");
	char *env2 = envbuf;
	ENV("DISPLAY=127.0.0.1:0");
	char *env3 = envbuf;
	ENV("PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/bin:/sbin");
	int argc = 0;
	char **argv = (char **)ALIGN_TO(envbuf, sizeof(void*));

	/* Parse command line */
	int in_quote = 0;
	char *j = current_startup_base;
	for (char *i = current_startup_base; i <= current_startup_base + len; i++)
		if (!in_quote && (*i == ' ' || *i == '\t' || *i == '\r' || *i == '\n' || *i == 0))
		{
			*i = 0;
			if (i > j)
				argv[argc++] = j;
			j = i + 1;
		}
		else if (*i == '"')
		{
			*i = 0;
			if (in_quote)
				argv[argc++] = j;
			in_quote = !in_quote;
			j = i + 1;
		}
	argv[argc] = NULL;
	char **envp = argv + argc + 1;
	int env_size = 4;
	envp[0] = env0;
	envp[1] = env1;
	envp[2] = env2;
	envp[3] = env3;
	envp[4] = NULL;
	char *buffer_base = (char*)(envp + env_size + 1);

	const char *filename = NULL;
	int arg_start;
	for (int i = 1; i < argc; i++)
	{
		if (!strcmp(argv[i], "--session-id"))
		{
			if (++i < argc)
			{
				int len = strlen(argv[i]);
				if (len >= MAX_SESSION_ID_LEN)
				{
					init_subsystems();
					kprintf("--session-id: Session ID too long.\n");
					process_exit(1, 0);
				}
				for (int j = 0; j < len; j++)
				{
					char ch = argv[i][j];
					if (!((ch >= '0' && ch <= '9') || (ch >= 'a' && ch <= 'z') || (ch >= 'A' && ch <= 'Z') ||
						ch == '_' || ch == '-'))
					{
						init_subsystems();
						kprintf("--session-id: Invalid characters.\n");
						process_exit(1, 0);
					}
				}
				strcpy(cmdline_flags->global_session_id, argv[i]);
			}
			else
			{
				init_subsystems();
				kprintf("--session-id: No ID given.\n");
				process_exit(1, 0);
			}
		}
		else if (!strcmp(argv[i], "--help") || !strcmp(argv[i], "-h"))
		{
			init_subsystems();
			print_help();
			process_exit(1, 0);
		}
		else if (!strcmp(argv[i], "--usage"))
		{
			init_subsystems();
			print_usage();
			process_exit(1, 0);
		}
		else if (!strcmp(argv[i], "--version") || !strcmp(argv[i], "-v"))
		{
			init_subsystems();
			print_version();
			process_exit(1, 0);
		}
		else if (!strcmp(argv[i], "--dbt-trace"))
			cmdline_flags->dbt_trace = true;
		else if (!strcmp(argv[i], "--dbt-trace-all"))
		{
			cmdline_flags->dbt_trace = true;
			cmdline_flags->dbt_trace_all = true;
		}
		else if (argv[i][0] == '-')
		{
			init_subsystems();
			kprintf("Unrecognized option: %s\n", argv[i]);
			process_exit(1, 0);
		}
		else if (!filename)
		{
			filename = argv[i];
			arg_start = i;
			break;
		}
	}

	init_subsystems();
	if (filename)
	{
		install_syscall_handler();
		int r = do_execve(filename, argc - arg_start, argv + arg_start, env_size, envp, buffer_base, NULL);
		if (r == -L_ENOENT)
		{
			kprintf("Executable not found.");
			process_exit(1, 0);
		}
	}
	print_usage();
	process_exit(1, 0);
}
Exemple #8
0
static int load_elf(struct file *f, struct binfmt *binary)
{
	struct elf_header *elf = binary->has_interpreter ? binary->interpreter : binary->executable;
	/* Load ELF header */
	f->op_vtable->pread(f, &elf->eh, sizeof(Elf_Ehdr), 0);
	if (elf->eh.e_type != ET_EXEC && elf->eh.e_type != ET_DYN)
	{
		log_error("Only ET_EXEC and ET_DYN executables can be loaded.");
		return -L_EACCES;
	}

#ifdef _WIN64
	if (elf->eh.e_machine != EM_X86_64)
	{
		log_error("Not an x86_64 executable.");
#else
	if (elf->eh.e_machine != EM_386)
	{
		log_error("Not an i386 executable.");
#endif
		return -L_EACCES;
	}

	/* Load program header table */
	size_t phsize = (size_t)elf->eh.e_phentsize * (size_t)elf->eh.e_phnum;
	char *pht = pht_storage;
	f->op_vtable->pread(f, pht, phsize, elf->eh.e_phoff); /* TODO */

	/* Find virtual address range */
	elf->low = 0xFFFFFFFF;
	elf->high = 0;
	for (int i = 0; i < elf->eh.e_phnum; i++)
	{
		Elf_Phdr *ph = (Elf_Phdr *)&pht[elf->eh.e_phentsize * i];
		if (ph->p_type == PT_LOAD)
		{
			elf->low = min(elf->low, ph->p_vaddr);
			elf->high = max(elf->high, ph->p_vaddr + ph->p_memsz);
			log_info("PT_LOAD: vaddr %p, size %p", ph->p_vaddr, ph->p_memsz);
		}
		else if (ph->p_type == PT_DYNAMIC)
			log_info("PT_DYNAMIC: vaddr %p, size %p", ph->p_vaddr, ph->p_memsz);
		else if (ph->p_type == PT_PHDR) /* Patch phdr pointer in PT_PHDR, glibc uses it to determine load offset */
			ph->p_vaddr = (size_t)pht;
	}

	/* Find virtual address range for ET_DYN executable */
	elf->load_base = 0;
	if (elf->eh.e_type == ET_DYN)
	{
		size_t free_addr = mm_find_free_pages(elf->high - elf->low) * PAGE_SIZE;
		if (!free_addr)
			return -L_ENOMEM;
		elf->load_base = free_addr - elf->low;
		log_info("ET_DYN load offset: %p, real range [%p, %p)", elf->load_base, elf->load_base + elf->low, elf->load_base + elf->high);
	}

#ifdef _WIN64
	/* Unmap the pre-reserved executable region (see fork_init() for details) */
	size_t region_start = 0x400000;
	VirtualFree(region_start, 0, MEM_RELEASE); /* This will silently fail if it's not the intended case */
#endif

	/* Map executable segments */
	/* TODO: Directly use mmap() */
	int load_base_set = 0;
	for (int i = 0; i < elf->eh.e_phnum; i++)
	{
		Elf_Phdr *ph = (Elf_Phdr *)&pht[elf->eh.e_phentsize * i];
		if (ph->p_type == PT_LOAD)
		{
			size_t addr = ph->p_vaddr & 0xFFFFF000;
			size_t size = ph->p_memsz + (ph->p_vaddr & 0x00000FFF);
			off_t offset_pages = ph->p_offset / PAGE_SIZE;

			/* Note: In ET_DYN executables, all address are based upon elf->load_base.
			 * But in ET_EXEC executables, all address are absolute.
			 */
			int prot = 0;
			if (ph->p_flags & PF_R)
				prot |= PROT_READ;
			if (ph->p_flags & PF_W)
				prot |= PROT_WRITE;
			if (ph->p_flags & PF_X)
				prot |= PROT_EXEC;
			if (elf->eh.e_type == ET_DYN)
				addr += elf->load_base;
			mm_mmap((void*)addr, size, PROT_READ | PROT_WRITE | PROT_EXEC,
				MAP_ANONYMOUS | MAP_PRIVATE | MAP_FIXED | MAP_POPULATE, 0, NULL, 0);
			char *vaddr = (char *)ph->p_vaddr;
			if (elf->eh.e_type == ET_DYN)
				vaddr += elf->load_base;
			mm_check_write(vaddr, ph->p_filesz); /* Populate the memory, otherwise pread() will fail */
			f->op_vtable->pread(f, vaddr, ph->p_filesz, ph->p_offset);
			if (!binary->has_interpreter) /* This is not interpreter */
				mm_update_brk((void*)(addr + size));
			if (elf->eh.e_type == ET_EXEC && !load_base_set)
			{
				/* Record load base of first segment in ET_EXEC
				 * load_base will be used in run() to calculate various auxiliary vector pointers */
				load_base_set = 1;
				elf->load_base = addr;
			}
		}
	}

	/* Load interpreter if present */
	for (int i = 0; i < elf->eh.e_phnum; i++)
	{
		Elf_Phdr *ph = (Elf_Phdr *)&pht[elf->eh.e_phentsize * i];
		if (ph->p_type == PT_INTERP)
		{
			if (binary->has_interpreter) /* This is already an interpreter */
				return -L_EACCES; /* Bad interpreter */
			binary->has_interpreter = true;
			char path[MAX_PATH];
			f->op_vtable->pread(f, path, ph->p_filesz, ph->p_offset); /* TODO */
			path[ph->p_filesz] = 0;
			log_info("interpreter: %s", path);

			struct file *fi;
			int r = vfs_openat(AT_FDCWD, path, O_RDONLY, 0, 0, &fi);
			if (r < 0)
				return r;
			if (!winfs_is_winfile(fi))
			{
				vfs_release(fi);
				return -L_EACCES;
			}

			r = load_elf(fi, binary);
			vfs_release(fi);
			if (r < 0)
				return -L_EACCES; /* Bad interpreter */
		}
	}
	return 0;
}

#define MAX_SHEBANG_LINE	256
static int load_script(struct file *f, struct binfmt *binary)
{
	/* Parse the shebang line */
	int size = f->op_vtable->pread(f, binary->buffer_base, MAX_SHEBANG_LINE, 0);
	char *p = binary->buffer_base, *end = p + size;
	/* Skip shebang */
	p += 2;
	/* Skip spaces */
	while (p < end && *p == ' ')
		p++;
	if (p == end)
		return -L_EACCES;
	const char *executable = p;
	binary->argv0 = p;
	while (p < end && *p != ' ' && *p != '\n')
		p++;
	if (p == end)
		return -L_EACCES;
	if (*p == '\n')
		*p = 0; /* It has no argument */
	else
	{
		*p++ = 0;
		while (p < end && *p == ' ')
			p++;
		if (p == end)
			return -L_EACCES;
		if (*p != '\n')
		{
			/* It has an argument */
			binary->argv1 = p;
			while (p < end && *p != '\n')
				p++;
			if (p == end)
				return -L_EACCES;
			*p = 0;
		}
	}
	binary->replace_argv0 = TRUE;

	struct file *fe;
	int r = vfs_openat(AT_FDCWD, executable, O_RDONLY, 0, 0, &fe);
	if (r < 0)
		return r;
	if (!winfs_is_winfile(fe))
	{
		vfs_release(fe);
		return -L_EACCES;
	}
	/* TODO: Recursive interpreters */
	return load_elf(fe, binary);
}
Exemple #9
0
int Syscall::kcall_threadcreate(CoreData& core_data, Thread *currt) {

    /*
     * Create a new thread the POSIX way
     *
     * KPARM1 : attr
     * KPARM2 : start_routine
     * KPARM3 : arg
     *
     * retval : tid or -ERRNO
     */

    //Thread       *org_thread;
    pthread_attr_t      attr;
    int                 err;
    mm_context   *ctx;
    Process             *pproc;
//    struct _Anvil_tls   *ptls;

    kdebug("kcall_threadcreate %016lx\n", KPARM2);

    /* Validate the args */
    if ((err = currt->kcopy_fromuser(&attr, (const char *)KPARM1,
                                        sizeof(pthread_attr_t))) != 0) {
        kdebug("kcall_threadcreate - bad attr structure\n");
        return -err;
    }

    if (currt->ptr_check((void *)KPARM2) == -1) {
        kdebug("kcall_threadcreate - bad start routine\n");
        return -EINVAL;
    }

    /* Handle the case of someone creating thread 1 in a new process */
    if (attr.pid) {
        if ((pproc = proctable.getref(attr.pid)) == NULL)
        {
            return -EAGAIN;
        }
    }
    else
    {
        pproc = currt->get_proc();
        pproc->incref();
    }

    /*
     * FIXME: It should be possible to do this a different way
     * Get the cr3 of the process we'll be creating in
     */
    ctx = pproc->ctx;

    /*
     * According to Posix the user may pass us both stacksize and stackaddr,
     * just stacksize or nothing. If the user passes nothing we use the
     * default (4 * __PAGESIZE).
     */
    if (attr.stackaddr) {
        /* The user passed us a stack - make sure that he gave us the size
         * as well and check it
         */
        if (!attr.stacksize) {
            return -EINVAL;
        }
        /* Check */
    }
    if (!attr.stacksize) {
        attr.stacksize = 4 * __PAGESIZE;
    }

    void *stk;
    size_t stk_size;

    /* Now check whether we need to create a stack. */
    if (attr.stackaddr) {
        kdebug("Passing in stack %016lx\n", attr.stackaddr);
        /* We already checked that the address and size are valid */
        stk = (char *)attr.stackaddr;
        stk_size = attr.stacksize;
    }
    else {
        kdebug("Creating stack\n");
        //ksched_block(THR_ST_CREATING);
        int err = mm_mmap(pproc->ctx, 0, attr.stacksize,
                PROT_READ|PROT_WRITE, MAP_ANON|MAP_GUARD,
                -1, 0, &stk);
        stk_size = attr.stacksize;
        //kdebug("Created stack %d %d %p %ld\n", tnew->get_pid(), tnew->get_id(), tnew->stackaddr, tnew->stacksize);
    }

    /* Seems okay so let's create a new thread */
    Thread *tnew = new Thread(KPARM2, KPARM3, stk, stk_size);

    if ((err = pproc->thread_add(tnew)) != 0)
    {
        kprintf("kcall_threadcreate (kobj_create) - err %d\n", -err);
        pproc->unref();
        return -err;
    }

    /* Initialise the thread context */
    if (attr.stopped)
    {
        tnew->set_state(THR_ST_STOPPED);
    }

    /* Some fields are inherited from the creating thread */
    tnew->priority     = currt->priority;
    tnew->m_thread_signal.set_blocked(currt->m_thread_signal.get_blocked());
    tnew->max_addr     = currt->max_addr;
    tnew->ctx          = ctx;

    tnew->init_tls(attr.return_func);

    /* Unblock the new thread - sets the state to THR_ST_READY */
    if (tnew->get_state() == THR_ST_READY) {
        sys.m_sched.add(tnew, 0);
    }

    tnew->activate();
    //kobj_unlock(KOBJ(tnew));

    kdebug("finished STARTING1 %d %d thread at %016lx\n", tnew->get_pid(), tnew->get_id(), tnew->reg.rip);

    //pproc->unref();

    return tnew->get_id();
}
Exemple #10
0
int kthread_init() {

    Process         *proc1;
    Thread       *tnew;
    int                 err;
    int                 i;
    //struct _Anvil_tls   *ptls;

    //kobj_thread_type = kobj_register_type(sizeof(kobj_thread_t), (void (*)(void *))thread_delete_callback);

    /* All these threads are going to be part of process 1 */
    proc1 = proctable.getref(1);

    kdebug("proc1=%016lx pid=%d\n", proc1, proc1->get_id());

    /* Create an idle thread for each core in ring 1 */
    for (i=0; i<ksysinfo->num_cores; ++i)
    {
        /* TODO: allocate a proper stack */
        void *stackaddr = kmm_page_alloc();//mm_mmap(k_ctx, 0, IDLESTACK_SIZE,
                    //PROT_READ | PROT_WRITE, MAP_ANON | MAP_GUARD, -1, 0, NULL);
        memset(tnew->stackaddr, 0, IDLESTACK_SIZE);

        /* Seems okay so let's create a new thread */
        tnew = new Thread((uint64_t)idle, (uint64_t)i, stackaddr, IDLESTACK_SIZE);
//        if ((err = proc1->thread_add(tnew)) != 0)
//        {
//            kprintf("kcall_threadcreate (kobj_create) - err %d\n", -err);
//            return -err;
//        }

        /* Initialise the thread context */

        /* Now check whether we need to create a stack */
        tnew->reg.cs     = RING1_CS;
        tnew->reg.oldss  = RING1_SS;
        tnew->set_state(THR_ST_RUNNING);
        tnew->priority   = 0;
        tnew->max_addr   = (char *)KERN_TOP;
        tnew->ctx        = proc1->ctx;
        kdebug("pid=%d tid=%d\n", tnew->get_pid(), tnew->get_id());

        sys.core_data[i].curr_thread = tnew;

        tnew->affinity   = i;
        tnew->activate();
    }

    void *stk_addr;
    err = mm_mmap(proc1->ctx, 0, 4 * __PAGESIZE,
            PROT_READ|PROT_WRITE, MAP_ANON|MAP_GUARD,
            -1, 0, &stk_addr);

    /* Create the main thread in the init - runs in ring 3 */
    tnew = new Thread(ksysinfo->init_program_info.ventry, 0, stk_addr, 4 * __PAGESIZE);
    if ((err = proc1->thread_add(tnew)) != 0)
    {
        kprintf("kcall_threadcreate (kobj_create) - err %d\n", -err);
        return -err;
    }

    tnew->ctx = proc1->ctx;

    mm_ctx_set(tnew->ctx);
    memset(tnew->stackaddr, 0, 4 * __PAGESIZE);

    tnew->max_addr   = (char *)proc1->ctx->hi_addr;

    /* We've got a stack so put the TLS stuff on it */
//    mm_ctx_set(tnew->ctx);
//    ptls = (struct _Anvil_tls *)tnew->reg.oldrsp;
//    ptls->return_func = NULL;
//
//    ptls->id = tnew->get_id() | ((tnew->get_pid() & 0x7fff) << 15);
//    kdebug("ID=%d id=%d pid=%d tnew=%016lx\n", ptls->id, tnew->get_id(), tnew->get_pid(), tnew);
//    ptls->stackaddr = tnew->stackaddr;
//    ptls->stacksize = tnew->stacksize;
//    ptls->pself = ptls;
//    tnew->pptls = &ptls->pself;

    proc1->unref();

    tnew->init_tls(NULL);

    /* 24 bytes for argc, argv and envp */
    tnew->reg.oldrsp -= 24;

    sys.m_sched.add(tnew, 0);

    tnew->activate();

    return 0;
}
Exemple #11
0
void main()
{
	log_init();
	fork_init();
	/* fork_init() will directly jump to restored thread context if we are a fork child */

	mm_init();
	install_syscall_handler();
	heap_init();
	signal_init();
	process_init();
	tls_init();
	vfs_init();
	dbt_init();

	/* Parse command line */
	const char *cmdline = GetCommandLineA();
	int len = strlen(cmdline);
	if (len > BLOCK_SIZE) /* TODO: Test if there is sufficient space for argv[] array */
	{
		kprintf("Command line too long.\n");
		process_exit(1, 0);
	}

	startup = mm_mmap(NULL, BLOCK_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS,
		INTERNAL_MAP_TOPDOWN | INTERNAL_MAP_NORESET, NULL, 0);
	*(uintptr_t*) startup = 1;
	char *current_startup_base = startup + sizeof(uintptr_t);
	memcpy(current_startup_base, cmdline, len + 1);
	char *envbuf = (char *)ALIGN_TO(current_startup_base + len + 1, sizeof(void*));
	char *env0 = envbuf;
	ENV("TERM=xterm");
	char *env1 = envbuf;
	ENV("HOME=/root");
	char *env2 = envbuf;
	ENV("DISPLAY=127.0.0.1:0");
	char *env3 = envbuf;
	ENV("PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/bin:/sbin");
	int argc = 0;
	char **argv = (char **)ALIGN_TO(envbuf, sizeof(void*));

	/* Parse command line */
	int in_quote = 0;
	char *j = current_startup_base;
	for (char *i = current_startup_base; i <= current_startup_base + len; i++)
		if (!in_quote && (*i == ' ' || *i == '\t' || *i == '\r' || *i == '\n' || *i == 0))
		{
			*i = 0;
			if (i > j)
				argv[argc++] = j;
			j = i + 1;
		}
		else if (*i == '"')
		{
			*i = 0;
			if (in_quote)
				argv[argc++] = j;
			in_quote = !in_quote;
			j = i + 1;
		}
	argv[argc] = NULL;
	char **envp = argv + argc + 1;
	int env_size = 4;
	envp[0] = env0;
	envp[1] = env1;
	envp[2] = env2;
	envp[3] = env3;
	envp[4] = NULL;
	char *buffer_base = (char*)(envp + env_size + 1);

	const char *filename = NULL;
	for (int i = 1; i < argc; i++)
	{
		if (argv[i][0] == '-')
		{
		}
		else if (!filename)
			filename = argv[i];
	}
	if (filename)
		do_execve(filename, argc - 1, argv + 1, env_size, envp, buffer_base, NULL);
	kprintf("Usage: flinux <executable> [arguments]\n");
	process_exit(1, 0);
}