C++ (Cpp) mxc_arch_reset_init Exemples

Exemple #1

Fichier : mm.c Projet : Combitech/simcom-linux-kernel

/*!
 * This function initializes the memory map. It is called during the
 * system startup to create static physical to virtual memory mappings
 * for the IO modules.
 */
void __init mx31_map_io(void)
{
	mxc_set_cpu_type(MXC_CPU_MX31);
	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));

	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}

Exemple #2

Fichier : mm-imx21.c Projet : CSCLOG/beaglebone

void __init imx21_init_early(void)
{
	mxc_set_cpu_type(MXC_CPU_MX21);
	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
	imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
			MX21_NUM_GPIO_PORT);
}

Exemple #3

Fichier : mm-imx5.c Projet : kjedruczyk/parallella-linux-old

void __init imx51_init_early(void)
{
    imx51_ipu_mipi_setup();
    mxc_set_cpu_type(MXC_CPU_MX51);
    mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
    mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
}

Exemple #4

Fichier : mm-imx5.c Projet : curbthepain/android_kernel_us990_rev

void __init imx51_init_early(void)
{
	mxc_set_cpu_type(MXC_CPU_MX51);
	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
	arm_pm_idle = imx5_idle;
}

Exemple #5

Fichier : mm.c Projet : 15-712/linux-2.6

void __init mx53_map_io(void)
{
	mxc_set_cpu_type(MXC_CPU_MX53);
	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR));
	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
}

Exemple #6

Fichier : mm-imx1.c Projet : 15-712/linux-2.6

void __init mx1_map_io(void)
{
	mxc_set_cpu_type(MXC_CPU_MX1);
	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));

	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}

Exemple #7

Fichier : mm.c Projet : engicam-stable/iCoreM6_linux

/*!
 * This function initializes the memory map. It is called during the
 * system startup to create static physical to virtual memory map for
 * the IO modules.
 */
void __init mx6_map_io(void)
{
	iotable_init(mx6_io_desc, ARRAY_SIZE(mx6_io_desc));
	mxc_iomux_v3_init(IO_ADDRESS(MX6Q_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(IO_ADDRESS(MX6Q_WDOG1_BASE_ADDR));
	mx6_set_cpu_type();
	mxc_cpu_lp_set(WAIT_CLOCKED);
}

Exemple #8

Fichier : mm.c Projet : fread-ink/linux-2.6.35.3-imx5-kindle4

/*!
 * This function initializes the memory map. It is called during the
 * system startup to create static physical to virtual memory map for
 * the IO modules.
 */
void __init mx5_map_io(void)
{
	int i;

  //	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
	/* Fixup the mappings for MX53 */
	if (cpu_is_mx53() || cpu_is_mx50()) {
		for (i = 0; i < ARRAY_SIZE(mx5_io_desc); i++)
			mx5_io_desc[i].pfn -= __phys_to_pfn(0x20000000);
	}

	iotable_init(mx5_io_desc, ARRAY_SIZE(mx5_io_desc));
	mxc_arch_reset_init(IO_ADDRESS(WDOG1_BASE_ADDR));
}

Exemple #9

Fichier : mm-imx27.c Projet : 01org/thunderbolt-software-kernel-tree

void __init imx27_soc_init(void)
{
	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
	mxc_device_init();

	/* i.mx27 has the i.mx21 type gpio */
	mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
	mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
	mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
	mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);

	pinctrl_provide_dummies();
	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
			MX27_INT_DMACH0, 0); /* No ERR irq */
	/* imx27 has the imx21 type audmux */
	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
					ARRAY_SIZE(imx27_audmux_res));

	imx27_pm_init();
}

Exemple #10

Fichier : mm-imx5.c Projet : gvsurenderreddy/linux-libre-1

void __init imx51_soc_init(void)
{
	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
	mxc_device_init();

	/* i.mx51 has the i.mx35 type gpio */
	mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
	mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
	mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
	mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);

	pinctrl_provide_dummies();

	/* i.mx51 has the i.mx35 type sdma */
	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);

	/* Setup AIPS registers */
	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));

	/* i.mx51 has the i.mx31 type audmux */
	platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
					ARRAY_SIZE(imx51_audmux_res));
}

Exemple #11

Fichier : mm-imx5.c Projet : benedictsibiya/linux

void __init imx53_init_early(void)
{
	mxc_set_cpu_type(MXC_CPU_MX53);
	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}

Exemple #12

void __init imx31_init_early(void)
{
    mxc_set_cpu_type(MXC_CPU_MX31);
    mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}

Exemple #13

/*!
 * This function initializes the memory map. It is called during the
 * system startup to create static physical to virtual memory map for
 * the IO modules.
 */
void __init mx6_map_io(void)
{
	iotable_init(mx6_io_desc, ARRAY_SIZE(mx6_io_desc));
	mxc_iomux_v3_init(IO_ADDRESS(MX6Q_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(IO_ADDRESS(MX6Q_WDOG1_BASE_ADDR));
}