C++ (Cpp) ni_pcidio_print_flags Exemples

Exemple #1

static irqreturn_t nidio_interrupt(int irq, void *d)
{
	struct comedi_device *dev = d;
	struct comedi_subdevice *s = dev->subdevices;
	struct comedi_async *async = s->async;
	struct mite_struct *mite = devpriv->mite;

	
	long int AuxData = 0;
	short data1 = 0;
	short data2 = 0;
	int flags;
	int status;
	int work = 0;
	unsigned int m_status = 0;
	unsigned long irq_flags;

	
	if (dev->attached == 0) {
		
		return IRQ_NONE;
	}

	status = readb(devpriv->mite->daq_io_addr +
		       Interrupt_And_Window_Status);
	flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);

	DPRINTK("ni_pcidio_interrupt: status=0x%02x,flags=0x%02x\n",
		status, flags);
	ni_pcidio_print_flags(flags);
	ni_pcidio_print_status(status);

	
	

	spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
	if (devpriv->di_mite_chan)
		m_status = mite_get_status(devpriv->di_mite_chan);
#ifdef MITE_DEBUG
	mite_print_chsr(m_status);
#endif
	
	
	if (m_status & CHSR_INT) {
		if (m_status & CHSR_LINKC) {
			writel(CHOR_CLRLC,
			       mite->mite_io_addr +
			       MITE_CHOR(devpriv->di_mite_chan->channel));
			mite_sync_input_dma(devpriv->di_mite_chan, s->async);
			
		}
		if (m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_DRDY |
				 CHSR_DRQ1 | CHSR_MRDY)) {
			DPRINTK("unknown mite interrupt, disabling IRQ\n");
			async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
			disable_irq(dev->irq);
		}
	}
	spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);

	while (status & DataLeft) {
		work++;
		if (work > 20) {
			DPRINTK("too much work in interrupt\n");
			writeb(0x00,
			       devpriv->mite->daq_io_addr +
			       Master_DMA_And_Interrupt_Control);
			break;
		}

		flags &= IntEn;

		if (flags & TransferReady) {
			
			while (flags & TransferReady) {
				work++;
				if (work > 100) {
					DPRINTK("too much work in interrupt\n");
					writeb(0x00,
					       devpriv->mite->daq_io_addr +
					       Master_DMA_And_Interrupt_Control);
					goto out;
				}
				AuxData =
				    readl(devpriv->mite->daq_io_addr +
					  Group_1_FIFO);
				data1 = AuxData & 0xffff;
				data2 = (AuxData & 0xffff0000) >> 16;
				comedi_buf_put(async, data1);
				comedi_buf_put(async, data2);
				
				flags = readb(devpriv->mite->daq_io_addr +
					      Group_1_Flags);
			}
			
			
			
			
			async->events |= COMEDI_CB_BLOCK;
		}

		if (flags & CountExpired) {
			DPRINTK("CountExpired\n");
			writeb(ClearExpired,
			       devpriv->mite->daq_io_addr +
			       Group_1_Second_Clear);
			async->events |= COMEDI_CB_EOA;

			writeb(0x00, devpriv->mite->daq_io_addr + OpMode);
			break;
		} else if (flags & Waited) {
			DPRINTK("Waited\n");
			writeb(ClearWaited,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
			break;
		} else if (flags & PrimaryTC) {
			DPRINTK("PrimaryTC\n");
			writeb(ClearPrimaryTC,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA;
		} else if (flags & SecondaryTC) {
			DPRINTK("SecondaryTC\n");
			writeb(ClearSecondaryTC,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA;
		}
#if 0
		else {
			printk("ni_pcidio: unknown interrupt\n");
			async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
			writeb(0x00,
			       devpriv->mite->daq_io_addr +
			       Master_DMA_And_Interrupt_Control);
		}
#endif
		flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);
		status = readb(devpriv->mite->daq_io_addr +
			       Interrupt_And_Window_Status);
		
		
		
		
	}

out:
	ni_pcidio_event(dev, s);
#if 0
	if (!tag) {
		writeb(0x03,
		       devpriv->mite->daq_io_addr +
		       Master_DMA_And_Interrupt_Control);
	}
#endif
	return IRQ_HANDLED;
}

Exemple #2

Fichier : ni_pcidio.c Projet : CSCLOG/beaglebone

static irqreturn_t nidio_interrupt(int irq, void *d)
{
	struct comedi_device *dev = d;
	struct comedi_subdevice *s = dev->subdevices;
	struct comedi_async *async = s->async;
	struct mite_struct *mite = devpriv->mite;

	/* int i, j; */
	long int AuxData = 0;
	short data1 = 0;
	short data2 = 0;
	int flags;
	int status;
	int work = 0;
	unsigned int m_status = 0;
	unsigned long irq_flags;

	/* interrupcions parasites */
	if (dev->attached == 0) {
		/* assume it's from another card */
		return IRQ_NONE;
	}

	status = readb(devpriv->mite->daq_io_addr +
		       Interrupt_And_Window_Status);
	flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);

	DPRINTK("ni_pcidio_interrupt: status=0x%02x,flags=0x%02x\n",
		status, flags);
	ni_pcidio_print_flags(flags);
	ni_pcidio_print_status(status);

	/* printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf); */
	/* printk("buf[4096]=%08x\n",
	       *(unsigned int *)(async->prealloc_buf+4096)); */

	spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
	if (devpriv->di_mite_chan)
		m_status = mite_get_status(devpriv->di_mite_chan);
#ifdef MITE_DEBUG
	mite_print_chsr(m_status);
#endif
	/* printk("mite_bytes_transferred: %d\n",
	       mite_bytes_transferred(mite,DI_DMA_CHAN)); */

	/* mite_dump_regs(mite); */
	if (m_status & CHSR_INT) {
		if (m_status & CHSR_LINKC) {
			writel(CHOR_CLRLC,
			       mite->mite_io_addr +
			       MITE_CHOR(devpriv->di_mite_chan->channel));
			mite_sync_input_dma(devpriv->di_mite_chan, s->async);
			/* XXX need to byteswap */
		}
		if (m_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_DRDY |
				 CHSR_DRQ1 | CHSR_MRDY)) {
			DPRINTK("unknown mite interrupt, disabling IRQ\n");
			async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
			disable_irq(dev->irq);
		}
	}
	spin_unlock_irqrestore(&devpriv->mite_channel_lock, irq_flags);

	while (status & DataLeft) {
		work++;
		if (work > 20) {
			DPRINTK("too much work in interrupt\n");
			writeb(0x00,
			       devpriv->mite->daq_io_addr +
			       Master_DMA_And_Interrupt_Control);
			break;
		}

		flags &= IntEn;

		if (flags & TransferReady) {
			/* DPRINTK("TransferReady\n"); */
			while (flags & TransferReady) {
				work++;
				if (work > 100) {
					DPRINTK("too much work in interrupt\n");
					writeb(0x00,
					       devpriv->mite->daq_io_addr +
					       Master_DMA_And_Interrupt_Control
					      );
					goto out;
				}
				AuxData =
				    readl(devpriv->mite->daq_io_addr +
					  Group_1_FIFO);
				data1 = AuxData & 0xffff;
				data2 = (AuxData & 0xffff0000) >> 16;
				comedi_buf_put(async, data1);
				comedi_buf_put(async, data2);
				/* DPRINTK("read:%d, %d\n",data1,data2); */
				flags = readb(devpriv->mite->daq_io_addr +
					      Group_1_Flags);
			}
			/* DPRINTK("buf_int_count: %d\n",
				async->buf_int_count); */
			/* DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",
				IntEn,flags,status); */
			/* ni_pcidio_print_flags(flags); */
			/* ni_pcidio_print_status(status); */
			async->events |= COMEDI_CB_BLOCK;
		}

		if (flags & CountExpired) {
			DPRINTK("CountExpired\n");
			writeb(ClearExpired,
			       devpriv->mite->daq_io_addr +
			       Group_1_Second_Clear);
			async->events |= COMEDI_CB_EOA;

			writeb(0x00, devpriv->mite->daq_io_addr + OpMode);
			break;
		} else if (flags & Waited) {
			DPRINTK("Waited\n");
			writeb(ClearWaited,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
			break;
		} else if (flags & PrimaryTC) {
			DPRINTK("PrimaryTC\n");
			writeb(ClearPrimaryTC,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA;
		} else if (flags & SecondaryTC) {
			DPRINTK("SecondaryTC\n");
			writeb(ClearSecondaryTC,
			       devpriv->mite->daq_io_addr +
			       Group_1_First_Clear);
			async->events |= COMEDI_CB_EOA;
		}
#if 0
		else {
			printk("ni_pcidio: unknown interrupt\n");
			async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
			writeb(0x00,
			       devpriv->mite->daq_io_addr +
			       Master_DMA_And_Interrupt_Control);
		}
#endif
		flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);
		status = readb(devpriv->mite->daq_io_addr +
			       Interrupt_And_Window_Status);
		/* DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,"
			"status=0x%02x\n", IntEn, flags, status); */
		/* ni_pcidio_print_flags(flags); */
		/* ni_pcidio_print_status(status); */
	}

out:
	ni_pcidio_event(dev, s);
#if 0
	if (!tag) {
		writeb(0x03,
		       devpriv->mite->daq_io_addr +
		       Master_DMA_And_Interrupt_Control);
	}
#endif
	return IRQ_HANDLED;
}