C++ (Cpp) nrf_bootloader_app_start_impl Exemples

Exemple #1

Fichier : nrf_bootloader_app_start.c Projet : petersonev/keyboard

void nrf_bootloader_app_start(uint32_t start_addr)
{
    NRF_LOG_DEBUG("Running nrf_bootloader_app_start with address: 0x%08x", start_addr);
    uint32_t err_code;

    //NRF_LOG_INFO("Initializing SD in mbr");
    err_code = nrf_dfu_mbr_init_sd();
    if (err_code != NRF_SUCCESS)
    {
        NRF_LOG_ERROR("Failed running nrf_dfu_mbr_init_sd");
        return;
    }

    // Disable and clear interrupts
    NRF_LOG_DEBUG("Disabling interrupts");

    NVIC->ICER[0]=0xFFFFFFFF;
    NVIC->ICPR[0]=0xFFFFFFFF;
#if defined(__NRF_NVIC_ISER_COUNT) && __NRF_NVIC_ISER_COUNT == 2
    NVIC->ICER[1]=0xFFFFFFFF;
    NVIC->ICPR[1]=0xFFFFFFFF;
#endif

    // Set the sd softdevice vector table base address
    NRF_LOG_DEBUG("Setting SD vector table base: 0x%08x", start_addr);
    err_code = sd_softdevice_vector_table_base_set(start_addr);
    if (err_code != NRF_SUCCESS)
    {
        NRF_LOG_ERROR("Failed running sd_softdevice_vector_table_base_set");
        return;
    }

    // Run application
    nrf_bootloader_app_start_impl(start_addr);
}

Exemple #2

Fichier : nrf_bootloader_app_start.c Projet : etx/Espruino

void nrf_bootloader_app_start(uint32_t start_addr)
{
    NRF_LOG_INFO("Running nrf_bootloader_app_start with address: 0x%08x\r\n", start_addr);

#ifdef BLE_STACK_SUPPORT_REQD
    uint32_t err_code;

    //NRF_LOG_INFO("Initializing SD in mbr\r\n");
    err_code = nrf_dfu_mbr_init_sd();
    if(err_code != NRF_SUCCESS)
    {
        NRF_LOG_INFO("Failed running nrf_dfu_mbr_init_sd\r\n");
        return;
    }

#endif

    // Disable interrupts
    NRF_LOG_INFO("Disabling interrupts\r\n");

    NVIC->ICER[0]=0xFFFFFFFF;
#if defined(__NRF_NVIC_ISER_COUNT) && __NRF_NVIC_ISER_COUNT == 2
    NVIC->ICER[1]=0xFFFFFFFF;
#endif

#ifdef BLE_STACK_SUPPORT_REQD
    // Set the sd softdevice vector table base address
    NRF_LOG_INFO("Setting SD vector table base: 0x%08x\r\n", start_addr);
    err_code = sd_softdevice_vector_table_base_set(start_addr);
    if(err_code != NRF_SUCCESS)
    {
        NRF_LOG_INFO("Failed running sd_softdevice_vector_table_base_set\r\n");
        return;
    }
#endif

    // Run application
    nrf_bootloader_app_start_impl(start_addr);
}

Exemple #3

Fichier : nrf_bootloader_app_start_nosd.c Projet : petersonev/keyboard

void nrf_bootloader_app_start(uint32_t start_addr)
{
    NRF_LOG_DEBUG("Running nrf_bootloader_app_start with address: 0x%08x", start_addr);
    uint32_t err_code;

    // Disable interrupts
    NRF_LOG_DEBUG("Disabling interrupts");

    NVIC->ICER[0]=0xFFFFFFFF;
#if defined(__NRF_NVIC_ISER_COUNT) && __NRF_NVIC_ISER_COUNT == 2
    NVIC->ICER[1]=0xFFFFFFFF;
#endif

    NRF_LOG_DEBUG("Setting MBR irq forward address: 0x%08x", start_addr);
    err_code = nrf_dfu_mbr_irq_forward_address_set(start_addr);
    if (err_code != NRF_SUCCESS)
    {
        NRF_LOG_ERROR("Failed running nrf_dfu_mbr_irq_forward_address_set");
        return;
    }

    // Run application
    nrf_bootloader_app_start_impl(start_addr);
}