int
main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
TWI_Master_Initialise();
sei();
nrk_led_set(RED_LED);
/* initialize the adxl345 */
init_adxl345();
init_itg3200();
init_hmc5843();
nrk_init();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
nrk_create_taskset ();
nrk_start();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
tdma_mode_set(TDMA_MASTER);
// use tdma's tree scheduler
tdma_schedule_method_set(TDMA_SCHED_TREE);
tdma_task_config ();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_init_hardware();
nrk_init();
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
nrk_create_taskset ();
for (uint16_t task_ID = 1; task_ID <= 3; task_ID++) {
nrk_kprintf("InitT");
nrk_printnum((uint32_t)task_ID);
nrk_kprintf(":NP:");
nrk_printnum((uint32_t)nrk_task_TCB[task_ID].next_period);
nrk_kprintf("\r\n");
}
nrk_start();
return 0;
}
int main()
{
// initialise the UART
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
// initialise the OS
nrk_init();
// clear all LEDs
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED); // will toggle whenever a packet is sent
nrk_led_clr(GREEN_LED); // will toggle whenever a packet is received
nrk_led_clr(RED_LED); // will light up on error
// start the clock
nrk_time_set(0,0);
// initialise the network stack
nrk_init_nw_stack();
if(DEBUG_APP == 1)
nrk_kprintf(PSTR("Network stack initialised\r\n"));
nrk_create_taskset(); // create the set of tasks
nrk_start(); // start this node
return 0;
}
int
main ()
{
nrk_setup_ports();
nrk_register_drivers();
//nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_kprintf( PSTR("Starting up...\r\n") );
nrk_init();
nrk_led_clr(0);
nrk_led_clr(1);
nrk_led_clr(2);
nrk_led_clr(3);
nrk_time_set(0,0);
rtl_task_config();
nrk_create_taskset ();
nrk_start();
return 0;
}
int
main ()
{
uint16_t div;
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
printf( "Starting up...\r\n" );
nrk_init();
nrk_led_clr(0);
nrk_led_clr(1);
nrk_led_clr(2);
nrk_led_clr(3);
nrk_time_set(0,0);
rtl_task_config();
nrk_create_taskset ();
nrk_start();
return 0;
}
int main ()
{
nrk_init_hardware();
//nrk_setup_ports();
//nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_init();
nrk_time_set(0,0);
nrk_create_taskset();
P2DIR |= 0x06; // Set P1.0 to output direction
P2OUT |= 0x06;
nrk_start(); // includes //nrk_target_start(); includes timer_start
for (;;)
{
volatile unsigned int i; // volatile to prevent optimization
// P2OUT ^= 0x06; // Toggle P1.0 using exclusive-OR
i = 10000; // SW Delay
do i--;
while (i != 0);
}
}
int
main ()
{
uint8_t t;
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
oled_setup();
nrk_init();
nrk_gpio_direction(NRK_DEBUG_0, NRK_PIN_INPUT);
nrk_gpio_direction(NRK_DEBUG_1, NRK_PIN_OUTPUT);
oled_off();
nrk_gpio_direction(NRK_DEBUG_2, NRK_PIN_INPUT);
nrk_gpio_direction(NRK_DEBUG_3, NRK_PIN_INPUT);
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
bmac_task_config ();
nrk_create_taskset ();
nrk_start();
return 0;
}
int
main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
DDRF=0xff;
while(1)
{
PORTF=0xff;
nrk_spin_wait_us(500);
PORTF=0x00;
nrk_spin_wait_us(500);
}
nrk_init();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
nrk_create_taskset ();
nrk_start();
return 0;
}
int main() {
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_init();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0, 0);
nrk_create_taskset();
// sem1 = nrk_sem_create(1, 10);
nrk_sem_list[0].value = 1;
nrk_sem_list[0].count = 1;
nrk_sem_list[0].resource_ceiling = 5;
sem1 = nrk_sem_list;
if (sem1 == NULL)
printf("Creating sem error\n");
nrk_start();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
// nrk_setup_uart (UART_BAUDRATE_230K4);
nrk_setup_uart_gps(UART_BAUDRATE_115K2);
TWI_Master_Initialise();
grideye_addr = 0x68;
printf ("Starting up...\r\n");
nrk_init ();
nrk_led_clr (ORANGE_LED);
nrk_led_clr (BLUE_LED);
nrk_led_clr (GREEN_LED);
nrk_led_clr (RED_LED);
nrk_time_set (0, 0);
nrk_create_taskset ();
nrk_start ();
return 0;
}
int
main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_init();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
nrk_create_taskset();
// Semaphore initialization
semaphore1 = nrk_sem_create(1,3);
semaphore2 = nrk_sem_create(1,5);
semaphore3 = nrk_sem_create(1,1);
nrk_start();
return 0;
}
int main ()
{
// init phoenix
phoenix_init();
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
bmac_task_config ();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_led_clr(BLUE_LED);
nrk_time_set(0,0);
bmac_task_config();
nrk_create_taskset();
lock = nrk_sem_create(1,2);
if( lock==NULL ) {
nrk_kprintf( PSTR("Error creating sem\r\n" ));
}
nrk_start();
return 0;
}
int
main ()
{
uint8_t t;
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
printf( "Starting up...\r\n" );
nrk_init();
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_set(GREEN_LED);
nrk_led_clr(RED_LED);
nrk_time_set(0,0);
nrk_create_taskset ();
my_semaphore = nrk_sem_create(1,4);
if(my_semaphore==NULL) nrk_kprintf( PSTR("Error creating sem\r\n" ));
nrk_start();
return 0;
}
int main ()
{
uint16_t div;
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
begin();//start I2C
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
tdma_set_error_callback(&tdma_error);
tdma_task_config();
//nrk_register_drivers();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main(void)
{
int r;
int i;
// Data to be transmitted
for(i=0;i<MAX_MOLES;i++)
{
for(r=0;r<512;r++)
{
data[r+(512*i)] = r;
}
}
// Initialize the packet handlers
init();
initPacketHandler();
//Start transmission
startDataTransmission(2,10);
startDataTransmission(1,10);
nrk_setup_ports();
nrk_init();
bmac_task_config();
nrk_create_taskset();
bmac_init (MY_CHANNEL);
bmac_auto_ack_disable();
nrk_start();
return 0;
}
int main ()
{
uint8_t ds;
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
ds=nrk_eeprom_read_byte(EEPROM_SLEEP_STATE_ADDR);
if(ds==1) deep_sleep_button();
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
tdma_set_error_callback(&tdma_error);
tdma_task_config();
nrk_register_drivers();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
tdma_mode_set(TDMA_SLAVE);
// do the scheduling by yourself
tdma_schedule_method_set(TDMA_SCHED_MANUAL);
// rcv sync packet from master
tdma_schedule_add(0, TDMA_RX, -1);
// SCHEDULE A
// add a TX slot for every tenth slot
for (tdma_slot_t i = 10; i < TDMA_SLOTS_PER_CYCLE; i+=10)
{
tdma_schedule_add(i, TDMA_TX_PARENT, 0);
}
// SCHEDULE B
// just do one slot
//tdma_schedule_add(10, TDMA_TX_PARENT, 0);
// SCHEDULE C
// for node 2
// tdma_schedule_add(0, TDMA_RX, 0);
// tdma_schedule_add(10, TDMA_TX_PARENT, 0);
// tdma_schedule_add(100, TDMA_TX_CHILD, 0);
// for node 3
//tdma_schedule_add(20, TDMA_TX_PARENT, 0);
//tdma_schedule_add(100, TDMA_RX, 0);
tdma_task_config ();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main(void)
{
nrk_setup_ports();
nrk_init();
bmac_task_config();
nrk_create_taskset();
nrk_start();
return 0;
}
int main(void) {
nrk_setup_ports();
nrk_init();
bmac_task_config();
bmac_init(1);
nrk_register_drivers();
nrk_create_taskset();
nrk_start();
return 0;
}
int main ()
{
uint16_t div;
nrk_int_disable();
// Configure relay port directions
DDRE |= 0x10;
socket_0_enable();
// Configure led port directions
DDRE |= 0x0c;
DDRD |= 0x00;
PORTD |= 0xff;
DDRF = 0;
socket_0_active=nrk_eeprom_read_byte(EEPROM_STATE_ADDR);
// turn outlet on if active or throttled for testing
if(socket_0_active==1 || socket_0_active==2)
{
socket_0_enable();
plug_led_green_set();
} else
{
socket_0_disable();
plug_led_green_clr();
}
// If PUD value set, then we expect it wasn't a clean reboot (unexpected restart).
// Try to force a proper watchdog reboot
if((MCUCR&0x10)!=0 )
{
//nrk_watchdog_enable();
nrk_int_disable();
MCUSR &= ~(1<<WDRF);
WDTCSR |= (1<<WDCE) | (1<<WDE);
WDTCSR = (1<<WDE) | (1<<WDP2) | (1<<WDP0);
// Disable interrupts to stop pending timers etc
while(1);
}
nrk_setup_uart (UART_BAUDRATE_115K2);
MCUCR |= BM(PUD);
nrk_init ();
nrk_time_set (0, 0);
tdma_set_error_callback(&tdma_error);
tdma_task_config();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int main(void)
{
nrk_setup_ports();
nrk_init();
nrk_register_drivers();
bmac_task_config();
nrk_create_taskset();
bmac_init (MY_CHANNEL);
bmac_auto_ack_disable();
nrk_start();
return 0;
}
int
main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
nrk_init();
nrk_time_set(0,0);
nrk_create_taskset ();
nrk_start();
return 0;
}
int main(void)
{
table_function.nrk_led_toggle = &nrk_led_toggle;
nrk_setup_ports();
nrk_init();
bmac_task_config();
nrk_create_taskset();
bmac_init (MY_CHANNEL);
bmac_auto_ack_disable();
nrk_start();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr (0);
nrk_led_clr (1);
nrk_led_clr (2);
nrk_led_clr (3);
nrk_time_set (0, 0);
tdma_mode_set(TDMA_MASTER);
// do the scheduling by yourself
tdma_schedule_method_set(TDMA_SCHED_MANUAL);
// send sync to child
tdma_schedule_add(0, TDMA_TX_CHILD, 0);
// SCHEDULE A
// add a RX from child every tenth slot
for (tdma_slot_t i = 10; i < TDMA_SLOTS_PER_CYCLE; i+=10)
{
tdma_schedule_add(i, TDMA_RX, 0);
}
// SCHEDULE B
// rcv data from child. priority is ignored
//tdma_schedule_add(10, TDMA_RX, -1);
// SCHEDULE C: Sync Test
// Add 2 RX slots from children from level 1 and 2
//tdma_schedule_add(0, TDMA_TX_CHILD, 0);
//tdma_schedule_add(10, TDMA_RX, 0);
//tdma_schedule_add(20, TDMA_RX, 0);
tdma_task_config ();
nrk_create_taskset ();
nrk_start ();
return 0;
}
int
main ()
{
uint8_t t;
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_230K4);
nrk_init();
nrk_time_set(0,0);
nrk_create_taskset ();
nrk_start();
return 0;
}
int
main ()
{
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
log_g = 1;
if(log_g)printf("log:Starting up...\r\n" );
nrk_init();
uint8_t i;
request_flag_g=0;
retransmit_count_g=0;
//added this 1
for(i=0;i<5;i++)
{
version_g[i] = 0;
}
//added
version_g[MAC_ADDR] = -1;
data_index_g = -1;
nrk_led_clr(ORANGE_LED);
nrk_led_clr(BLUE_LED);
nrk_led_set(GREEN_LED);
nrk_led_clr(RED_LED);
tx_sem = nrk_sem_create(1,4);
if(tx_sem==NULL) nrk_kprintf( PSTR("log:Error creating sem\r\n" ));
conn_sem = nrk_sem_create(1,4);
if(conn_sem==NULL) nrk_kprintf( PSTR("log:Error creating sem\n" ));
uart_sem = nrk_sem_create(1,4);
if(conn_sem==NULL) nrk_kprintf( PSTR("log:Error creating sem\n" ));
ack_sem = nrk_sem_create(1,4);
if(conn_sem==NULL) nrk_kprintf( PSTR("log:Error creating sem\n" ));
nrk_time_set(0,0);
nrk_register_drivers();
bmac_task_config ();
nrk_create_taskset ();
nrk_start();
return 0;
}
int main ()
{
nrk_setup_ports ();
nrk_setup_uart (UART_BAUDRATE_115K2);
nrk_init ();
nrk_led_clr (ORANGE_LED);
nrk_led_clr (BLUE_LED);
nrk_led_clr (GREEN_LED);
nrk_led_clr (RED_LED);
nrk_time_set (0, 0);
nrk_create_taskset ();
nrk_start ();
return 0;
}
int
main ()
{
uint8_t t;
nrk_setup_ports();
nrk_setup_uart(UART_BAUDRATE_115K2);
printf( "Starting up...\r\n" );
nrk_init();
nrk_time_set(0,0);
nrk_register_drivers();
nrk_create_taskset ();
nrk_start();
return 0;
}
