static int mmc328x_magnetic_resume(struct early_suspend *handler)
{
unsigned char data[16] = {0};
atomic_set(&suspend_flag,RESUME);
#ifdef MMC328X_SENSOR_DEBUG
printk("mmc328x resume mode :%d \n",suspend_flag.counter);
#endif
if (g_client){
kfree(g_client);
}
g_client = omap_gpio_i2c_init(OMAP_GPIO_FM_SDA , OMAP_GPIO_FM_SCL, MMC328X_I2C_ADDR, 200);
msleep(MMC328X_DELAY_RRM);
/* send SET/RESET cmd to mag sensor first of all */
#ifdef CONFIG_SENSORS_MMC328X
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_RRM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
msleep(MMC328X_DELAY_RRM);
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_TM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
msleep(5*MMC328X_DELAY_TM);
#endif
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_RM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
/* assume RM always success */
}
#ifndef CONFIG_SENSORS_MMC328X
/* wait external capacitor charging done for next RM */
msleep(MMC328X_DELAY_RM);
#else
msleep(10*MMC328X_DELAY_RM);
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_TM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
#endif
return 0;
}
static int mmc328x_init_probe(struct platform_device *pdev)
{
unsigned char data[16] = {0};
int res = 0;
int ret33 = 0;
if (get_hw_revision() == 0x09) {
printk("[SENSOR] hw_revision : 0x09\n ");
vreg_sensor = regulator_get(NULL, "vmmc2");
ret33 = regulator_enable(vreg_sensor);
if (ret33) {
printk("[SENSOR] Error, %s: vreg enable failed (%d)\n", __func__, ret33);
}
}
pr_info("mmc328x driver: probe\n");
g_client = omap_gpio_i2c_init(OMAP_GPIO_FM_SDA , OMAP_GPIO_FM_SCL, MMC328X_I2C_ADDR, 200);
res = misc_register(&mmc328x_device);
if (res) {
pr_err("%s: mmc328x_device register failed\n", __FUNCTION__);
goto out;
}
res = device_create_file(mmc328x_device.this_device, &dev_attr_mmc328x);
if (res) {
pr_err("%s: device_create_file failed\n", __FUNCTION__);
goto out_deregister;
}
res = sysfs_create_group(&mmc328x_device.this_device->kobj,&mmc328x_group);
if (res < 0){
pr_info("failed to create sysfs files\n");
goto out_sysinfo;
}
/* send SET/RESET cmd to mag sensor first of all */
#ifdef CONFIG_SENSORS_MMC328X
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_RRM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
msleep(MMC328X_DELAY_RRM);
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_TM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
msleep(5*MMC328X_DELAY_TM);
#endif
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_RM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
/* assume RM always success */
}
#ifndef CONFIG_SENSORS_MMC328X
/* wait external capacitor charging done for next RM */
msleep(MMC328X_DELAY_RM);
#else
msleep(10*MMC328X_DELAY_RM);
data[0] = MMC328X_REG_CTRL;
data[1] = MMC328X_CTRL_TM;
if (mmc328x_i2c_tx_data(data, 2) < 0) {
}
#endif
#if defined(CONFIG_HAS_EARLYSUSPEND)
early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
early_suspend.suspend = (void *)mmc328x_magnetic_suspend;
early_suspend.resume = (void *)mmc328x_magnetic_resume;
register_early_suspend(&early_suspend);
#endif
return 0;
out_sysinfo:
sysfs_remove_group(&mmc328x_device.this_device->kobj,&mmc328x_group);
out_deregister:
misc_deregister(&mmc328x_device);
out:
return res;
}
//static int yas_acc_probe(struct i2c_client *client, const struct i2c_device_id *id)
static int bma222_init_proc()
{
struct yas_acc_private_data *data;
int err;
printk(KERN_ERR "bma222_init_proc +\n");
/* Setup private data */
data = kzalloc(sizeof(struct yas_acc_private_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto ERR1;
}
yas_acc_set_data(data);
mutex_init(&data->driver_mutex);
mutex_init(&data->data_mutex);
data->client = omap_gpio_i2c_init(OMAP_GPIO_SENSOR_SDA, OMAP_GPIO_SENSOR_SCL, 0x08, 200);
/*
// Setup i2c client
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
goto ERR2;
}
i2c_set_clientdata(client, data);
data->client = client;
*/
/* Setup accelerometer core driver */
err = yas_acc_core_driver_init(data);
if (err < 0) {
goto ERR2;
}
/* Setup driver interface */
INIT_DELAYED_WORK(&data->work, yas_acc_work_func);
/* Setup input device interface */
err = yas_acc_input_init(data);
if (err < 0) {
goto ERR3;
}
/* Setup sysfs */
err = sysfs_create_group(&data->input->dev.kobj, &yas_acc_attribute_group);
if (err < 0) {
goto ERR4;
}
err = sensors_register(accel_sensor_device, NULL, accel_sensor_attrs, "accelerometer_sensor");
if(err) {
printk(KERN_ERR "%s: cound not register accelerometer sensor device(%d).\n", __func__, err);
}
#if defined(CONFIG_HAS_EARLYSUSPEND)
data->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
data->early_suspend.suspend = (void *)bma222_early_suspend;
data->early_suspend.resume = (void *)bma222_early_resume;
register_early_suspend(&data->early_suspend);
#endif
printk(KERN_ERR "bma222_init_proc -\n");
return 0;
ERR4:
yas_acc_input_fini(data);
ERR3:
yas_acc_core_driver_fini(data);
ERR2:
kfree(data);
ERR1:
return err;
}
