/* --------------------------------
* pq_init - initialize libpq at backend startup
* --------------------------------
*/
void
pq_init(void)
{
PqSendBufferSize = PQ_SEND_BUFFER_SIZE;
PqSendBuffer = MemoryContextAlloc(TopMemoryContext, PqSendBufferSize);
PqSendPointer = PqSendStart = PqRecvPointer = PqRecvLength = 0;
PqCommBusy = false;
PqCommReadingMsg = false;
DoingCopyOut = false;
on_proc_exit(socket_close, 0);
/*
* In backends (as soon as forked) we operate the underlying socket in
* nonblocking mode and use latches to implement blocking semantics if
* needed. That allows us to provide safely interruptible reads and
* writes.
*
* Use COMMERROR on failure, because ERROR would try to send the error to
* the client, which might require changing the mode again, leading to
* infinite recursion.
*/
#ifndef WIN32
if (!pg_set_noblock(MyProcPort->sock))
ereport(COMMERROR,
(errmsg("could not set socket to nonblocking mode: %m")));
#endif
}
/* --------------------------------
* pq_init - initialize libpq at backend startup
* --------------------------------
*/
void
pq_init(void)
{
PqSendPointer = PqRecvPointer = PqRecvLength = 0;
PqCommBusy = false;
DoingCopyOut = false;
on_proc_exit(pq_close, 0);
}
/* --------------------------------
* pq_init - initialize libpq at backend startup
* --------------------------------
*/
void
pq_init(void)
{
PqSendBufferSize = PQ_SEND_BUFFER_SIZE;
PqSendBuffer = MemoryContextAlloc(TopMemoryContext, PqSendBufferSize);
PqSendPointer = PqSendStart = PqRecvPointer = PqRecvLength = 0;
DoingCopyOut = false;
on_proc_exit(pq_close, 0);
}
/*
* Open server socket on specified port to accept connection from sessions
*/
int
pool_listen(unsigned short port, const char *unixSocketName)
{
int fd,
len;
struct sockaddr_un unix_addr;
int maxconn;
#ifdef HAVE_UNIX_SOCKETS
if (Lock_AF_UNIX(port, unixSocketName) < 0)
return -1;
/* create a Unix domain stream socket */
if ((fd = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)
return -1;
/* fill in socket address structure */
memset(&unix_addr, 0, sizeof(unix_addr));
unix_addr.sun_family = AF_UNIX;
strcpy(unix_addr.sun_path, sock_path);
len = sizeof(unix_addr.sun_family) +
strlen(unix_addr.sun_path) + 1;
/* bind the name to the descriptor */
if (bind(fd, (struct sockaddr *) & unix_addr, len) < 0)
return -1;
/*
* Select appropriate accept-queue length limit. PG_SOMAXCONN is only
* intended to provide a clamp on the request on platforms where an
* overly large request provokes a kernel error (are there any?).
*/
maxconn = MaxBackends * 2;
if (maxconn > PG_SOMAXCONN)
maxconn = PG_SOMAXCONN;
/* tell kernel we're a server */
if (listen(fd, maxconn) < 0)
return -1;
/* Arrange to unlink the socket file at exit */
on_proc_exit(StreamDoUnlink, 0);
return fd;
#else
/* TODO support for non-unix platform */
ereport(FATAL,
(errcode(ERRCODE_INTERNAL_ERROR),
errmsg("pool manager only supports UNIX socket")));
return -1;
#endif
}
static void
collectLocalMemoryStats(QueryDesc *queryDesc, int eflags)
{
BackendMemoryStat *myStat;
MemoryContextIteratorState state;
if (prev_ExecutorStart)
prev_ExecutorStart(queryDesc, eflags);
else
standard_ExecutorStart(queryDesc, eflags);
if (MyBackendProcNo < 0)
{
on_proc_exit(cleanupMyStat, 0);
MyBackendProcNo = MyProc->pgprocno;
Assert(MyBackendProcNo >= 0);
}
if (checkTick() == false)
return;
Assert(MyBackendProcNo < PROCARRAY_MAXPROCS);
myStat = NthBMS(MyBackendProcNo);
/*
* do not wait if reader currently locks our slot
*/
if (LWLockConditionalAcquire(myStat->lock, LW_EXCLUSIVE) == false)
return;
myStat->pid = MyProc->pid;
myStat->nContext = 0;
state.context = TopMemoryContext;
state.level = 0;
/*
* walk through all memory context and fill stat table in shared memory
*/
do {
MemoryContextStat *mcs = myStat->stats + myStat->nContext;
int namelen = strlen(state.context->name);
if (namelen > NAMEDATALEN - 1)
namelen = NAMEDATALEN - 1;
memcpy(mcs->name.data, state.context->name, namelen);
mcs->name.data[namelen] = '\0';
mcs->level = state.level;
getMemoryContextStat(state.context, &mcs->stat);
myStat->nContext++;
iterateMemoryContext(&state);
} while (state.context && myStat->nContext < N_MC_STAT);
LWLockRelease(myStat->lock);
}
/*
* smgrinit(), smgrshutdown() -- Initialize or shut down storage
* managers.
*
* Note: smgrinit is called during backend startup (normal or standalone
* case), *not* during postmaster start. Therefore, any resources created
* here or destroyed in smgrshutdown are backend-local.
*/
void
smgrinit(void)
{
int i;
for (i = 0; i < NSmgr; i++)
{
if (smgrsw[i].smgr_init)
(*(smgrsw[i].smgr_init)) ();
}
/* register the shutdown proc */
on_proc_exit(smgrshutdown, 0);
}
/*
* smgrinit(), smgrshutdown() -- Initialize or shut down storage
* managers.
*
* Note: smgrinit is called during backend startup (normal or standalone
* case), *not* during postmaster start. Therefore, any resources created
* here or destroyed in smgrshutdown are backend-local.
*/
void
smgrinit(void)
{
int i;
for (i = 0; i < NSmgr; i++)
{
if (smgrsw[i].smgr_init)
{
if (!(*(smgrsw[i].smgr_init)) ())
elog(FATAL, "smgr initialization failed on %s: %m",
DatumGetCString(DirectFunctionCall1(smgrout,
Int16GetDatum(i))));
}
}
/* register the shutdown proc */
on_proc_exit(smgrshutdown, 0);
}
/*
* InitFileAccess --- initialize this module during backend startup
*
* This is called during either normal or standalone backend start.
* It is *not* called in the postmaster.
*/
void
InitFileAccess(void)
{
Assert(SizeVfdCache == 0); /* call me only once */
/* initialize cache header entry */
VfdCache = (Vfd *) malloc(sizeof(Vfd));
if (VfdCache == NULL)
ereport(FATAL,
(errcode(ERRCODE_OUT_OF_MEMORY),
errmsg("out of memory")));
MemSet((char *) &(VfdCache[0]), 0, sizeof(Vfd));
VfdCache->fd = VFD_CLOSED;
SizeVfdCache = 1;
/* register proc-exit hook to ensure temp files are dropped at exit */
on_proc_exit(AtProcExit_Files, 0);
}
/* --------------------------------
* pq_init - initialize libpq at backend startup
* --------------------------------
*/
void
pq_init(void)
{
/* initialize state variables */
PqSendBufferSize = PQ_SEND_BUFFER_SIZE;
PqSendBuffer = MemoryContextAlloc(TopMemoryContext, PqSendBufferSize);
PqSendPointer = PqSendStart = PqRecvPointer = PqRecvLength = 0;
PqCommBusy = false;
PqCommReadingMsg = false;
DoingCopyOut = false;
/* set up process-exit hook to close the socket */
on_proc_exit(socket_close, 0);
/*
* In backends (as soon as forked) we operate the underlying socket in
* nonblocking mode and use latches to implement blocking semantics if
* needed. That allows us to provide safely interruptible reads and
* writes.
*
* Use COMMERROR on failure, because ERROR would try to send the error to
* the client, which might require changing the mode again, leading to
* infinite recursion.
*/
#ifndef WIN32
if (!pg_set_noblock(MyProcPort->sock))
ereport(COMMERROR,
(errmsg("could not set socket to nonblocking mode: %m")));
#endif
FeBeWaitSet = CreateWaitEventSet(TopMemoryContext, 3);
AddWaitEventToSet(FeBeWaitSet, WL_SOCKET_WRITEABLE, MyProcPort->sock,
NULL, NULL);
AddWaitEventToSet(FeBeWaitSet, WL_LATCH_SET, -1, MyLatch, NULL);
AddWaitEventToSet(FeBeWaitSet, WL_POSTMASTER_DEATH, -1, NULL, NULL);
}
/*
* Setup_AF_UNIX -- configure unix socket permissions
*/
static int
Setup_AF_UNIX(void)
{
/* Arrange to unlink the socket file at exit */
on_proc_exit(StreamDoUnlink, 0);
/*
* Fix socket ownership/permission if requested. Note we must do this
* before we listen() to avoid a window where unwanted connections could
* get accepted.
*/
Assert(Unix_socket_group);
if (Unix_socket_group[0] != '\0')
{
#ifdef WIN32
elog(WARNING, "configuration item unix_socket_group is not supported on this platform");
#else
char *endptr;
unsigned long val;
gid_t gid;
val = strtoul(Unix_socket_group, &endptr, 10);
if (*endptr == '\0')
{ /* numeric group id */
gid = val;
}
else
{ /* convert group name to id */
struct group *gr;
gr = getgrnam(Unix_socket_group);
if (!gr)
{
ereport(LOG,
(errmsg("group \"%s\" does not exist",
Unix_socket_group)));
return STATUS_ERROR;
}
gid = gr->gr_gid;
}
if (chown(sock_path, -1, gid) == -1)
{
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not set group of file \"%s\": %m",
sock_path)));
return STATUS_ERROR;
}
#endif
}
if (chmod(sock_path, Unix_socket_permissions) == -1)
{
ereport(LOG,
(errcode_for_file_access(),
errmsg("could not set permissions of file \"%s\": %m",
sock_path)));
return STATUS_ERROR;
}
return STATUS_OK;
}
/*
* There are a few ways to arrive in the initsequencer.
* 1. From _PG_init (called exactly once when the library is loaded for ANY
* reason).
* 1a. Because of the command LOAD 'libraryname';
* This case can be distinguished because _PG_init will have found the
* LOAD command and saved the 'libraryname' in pljavaLoadPath.
* 1b. Because of a CREATE FUNCTION naming this library. pljavaLoadPath will
* be NULL.
* 1c. By the first actual use of a PL/Java function, causing this library
* to be loaded. pljavaLoadPath will be NULL. The called function's Oid
* will be available to the call handler once we return from _PG_init,
* but it isn't (easily) available here.
* 2. From the call handler, if initialization isn't complete yet. That can only
* mean something failed in the earlier call to _PG_init, and whatever it was
* is highly likely to fail again. That may lead to the untidyness of
* duplicated diagnostic messages, but for now I like the belt-and-suspenders
* approach of making sure the init sequence gets as many chances as possible
* to succeed.
* 3. From a GUC assign hook, if the user has updated a setting that might allow
* initialization to succeed. It resumes from where it left off.
*
* In all cases, the sequence must progress as far as starting the VM and
* initializing the PL/Java classes. In all cases except 1a, that's enough,
* assuming the language handlers and schema have all been set up already (or,
* in case 1b, the user is intent on setting them up explicitly).
*
* In case 1a, we can go ahead and test for, and create, the schema, functions,
* and language entries as needed, using pljavaLoadPath as the library path
* if creating the language handler functions. One-stop shopping. (The presence
* of pljavaLoadPath in any of the other cases, such as resumption by an assign
* hook, indicates it is really a continuation of case 1a.)
*/
static void initsequencer(enum initstage is, bool tolerant)
{
JVMOptList optList;
Invocation ctx;
jint JNIresult;
char *greeting;
switch (is)
{
case IS_FORMLESS_VOID:
initstage = IS_GUCS_REGISTERED;
case IS_GUCS_REGISTERED:
libjvmlocation = strdup("libjvm.so");
initstage = IS_PLJAVA_ENABLED;
case IS_PLJAVA_ENABLED:
libjvm_handle = pg_dlopen(libjvmlocation);
if ( NULL == libjvm_handle )
{
ereport(ERROR, (
errmsg("Cannot load libjvm.so library, check that it is available in LD_LIBRARY_PATH"),
errdetail("%s", (char *)pg_dlerror())));
goto check_tolerant;
}
initstage = IS_CAND_JVMOPENED;
case IS_CAND_JVMOPENED:
pljava_createvm =
(jint (JNICALL *)(JavaVM **, void **, void *))
pg_dlsym(libjvm_handle, "JNI_CreateJavaVM");
if ( NULL == pljava_createvm )
{
/*
* If it hasn't got the symbol, it can't be the right
* library, so close/unload it so another can be tried.
* Format the dlerror string first: dlclose may clobber it.
*/
char *dle = MemoryContextStrdup(ErrorContext, pg_dlerror());
pg_dlclose(libjvm_handle);
initstage = IS_CAND_JVMLOCATION;
ereport(ERROR, (
errmsg("Cannot start Java VM"),
errdetail("%s", dle),
errhint("Check that libjvm.so is available in LD_LIBRARY_PATH")));
goto check_tolerant;
}
initstage = IS_CREATEVM_SYM_FOUND;
case IS_CREATEVM_SYM_FOUND:
s_javaLogLevel = INFO;
checkIntTimeType();
HashMap_initialize(); /* creates things in TopMemoryContext */
#ifdef PLJAVA_DEBUG
/* Hard setting for debug. Don't forget to recompile...
*/
pljava_debug = 1;
#endif
initstage = IS_MISC_ONCE_DONE;
case IS_MISC_ONCE_DONE:
JVMOptList_init(&optList); /* uses CurrentMemoryContext */
seenVisualVMName = false;
addUserJVMOptions(&optList);
if ( ! seenVisualVMName )
JVMOptList_addVisualVMName(&optList);
JVMOptList_add(&optList, "vfprintf", (void*)my_vfprintf, true);
#ifndef GCJ
JVMOptList_add(&optList, "-Xrs", 0, true);
#endif
effectiveClassPath = getClassPath("-Djava.class.path=");
if(effectiveClassPath != 0)
{
JVMOptList_add(&optList, effectiveClassPath, 0, true);
}
initstage = IS_JAVAVM_OPTLIST;
case IS_JAVAVM_OPTLIST:
JNIresult = initializeJavaVM(&optList); /* frees the optList */
if( JNI_OK != JNIresult )
{
initstage = IS_MISC_ONCE_DONE; /* optList has been freed */
StaticAssertStmt(sizeof(jint) <= sizeof(long int),
"jint wider than long int?!");
ereport(WARNING,
(errmsg("failed to create Java virtual machine"),
errdetail("JNI_CreateJavaVM returned an error code: %ld",
(long int)JNIresult),
jvmStartedAtLeastOnce ?
errhint("Because an earlier attempt during this session "
"did start a VM before failing, this probably means your "
"Java runtime environment does not support more than one "
"VM creation per session. You may need to exit this "
"session and start a new one.") : 0));
goto check_tolerant;
}
jvmStartedAtLeastOnce = true;
elog(DEBUG2, "successfully created Java virtual machine");
initstage = IS_JAVAVM_STARTED;
case IS_JAVAVM_STARTED:
#ifdef USE_PLJAVA_SIGHANDLERS
pqsignal(SIGINT, pljavaStatementCancelHandler);
pqsignal(SIGTERM, pljavaDieHandler);
#endif
/* Register an on_proc_exit handler that destroys the VM
*/
on_proc_exit(_destroyJavaVM, 0);
initstage = IS_SIGHANDLERS;
case IS_SIGHANDLERS:
Invocation_pushBootContext(&ctx);
PG_TRY();
{
initPLJavaClasses();
initJavaSession();
Invocation_popBootContext();
initstage = IS_PLJAVA_FOUND;
}
PG_CATCH();
{
MemoryContextSwitchTo(ctx.upperContext); /* leave ErrorContext */
Invocation_popBootContext();
initstage = IS_MISC_ONCE_DONE;
/* We can't stay here...
*/
if ( tolerant )
reLogWithChangedLevel(WARNING); /* so xact is not aborted */
else
{
EmitErrorReport(); /* no more unwinding, just log it */
/* Seeing an ERROR emitted to the log, without leaving the
* transaction aborted, would violate the principle of least
* astonishment. But at check_tolerant below, another ERROR will
* be thrown immediately, so the transaction effect will be as
* expected and this ERROR will contribute information beyond
* what is in the generic one thrown down there.
*/
FlushErrorState();
}
}
PG_END_TRY();
if ( IS_PLJAVA_FOUND != initstage )
{
/* JVM initialization failed for some reason. Destroy
* the VM if it exists. Perhaps the user will try
* fixing the pljava.classpath and make a new attempt.
*/
ereport(WARNING, (
errmsg("failed to load initial PL/Java classes"),
errhint("The most common reason is that \"pljava_classpath\" "
"needs to be set, naming the proper \"pljava.jar\" file.")
));
_destroyJavaVM(0, 0);
goto check_tolerant;
}
case IS_PLJAVA_FOUND:
greeting = InstallHelper_hello();
ereport(NULL != pljavaLoadPath ? NOTICE : DEBUG1, (
errmsg("PL/Java loaded"),
errdetail("versions:\n%s", greeting)));
pfree(greeting);
if ( NULL != pljavaLoadPath )
InstallHelper_groundwork(); /* sqlj schema, language handlers, ...*/
initstage = IS_COMPLETE;
case IS_COMPLETE:
pljavaLoadingAsExtension = false;
if ( alteredSettingsWereNeeded )
{
/* Use this StringInfoData to conditionally construct part of the
* hint string suggesting ALTER DATABASE ... SET ... FROM CURRENT
* provided the server is >= 9.2 where that will actually work.
* In 9.3, psprintf appeared, which would make this all simpler,
* but if 9.3+ were all that had to be supported, this would all
* be moot anyway. Doing the initStringInfo inside the ereport
* ensures the string is allocated in ErrorContext and won't leak.
* Don't remove the extra parens grouping
* (initStringInfo, appendStringInfo, errhint) ... with the parens,
* that's a comma expression, which is sequenced; without them, they
* are just function parameters with evaluation order unknown.
*/
StringInfoData buf;
#if PG_VERSION_NUM >= 90200
#define MOREHINT \
appendStringInfo(&buf, \
"using ALTER DATABASE %s SET ... FROM CURRENT or ", \
pljavaDbName()),
#else
#define MOREHINT
#endif
ereport(NOTICE, (
errmsg("PL/Java successfully started after adjusting settings"),
(initStringInfo(&buf),
MOREHINT
errhint("The settings that worked should be saved (%s"
"in the \"%s\" file). For a reminder of what has been set, "
"try: SELECT name, setting FROM pg_settings WHERE name LIKE"
" 'pljava.%%' AND source = 'session'",
buf.data,
superuser()
? PG_GETCONFIGOPTION("config_file")
: "postgresql.conf"))));
#undef MOREHINT
if ( loadAsExtensionFailed )
{
ereport(NOTICE, (errmsg(
"PL/Java load successful after failed CREATE EXTENSION"),
errdetail(
"PL/Java is now installed, but not as an extension."),
errhint(
"To correct that, either COMMIT or ROLLBACK, make sure "
"the working settings are saved, exit this session, and "
"in a new session, either: "
"1. if committed, run "
"\"CREATE EXTENSION pljava FROM unpackaged\", or 2. "
"if rolled back, simply \"CREATE EXTENSION pljava\" again."
)));
}
}
return;
default:
ereport(ERROR, (
errmsg("cannot set up PL/Java"),
errdetail(
"An unexpected stage was reached in the startup sequence."),
errhint(
"Please report the circumstances to the PL/Java maintainers.")
));
}
check_tolerant:
if ( pljavaLoadingAsExtension )
{
tolerant = false;
loadAsExtensionFailed = true;
pljavaLoadingAsExtension = false;
}
if ( !tolerant )
{
ereport(ERROR, (
errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg(
"cannot use PL/Java before successfully completing its setup"),
errhint(
"Check the log for messages closely preceding this one, "
"detailing what step of setup failed and what will be needed, "
"probably setting one of the \"pljava.\" configuration "
"variables, to complete the setup. If there is not enough "
"help in the log, try again with different settings for "
"\"log_min_messages\" or \"log_error_verbosity\".")));
}
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the actual database
* name can be returned to the caller in out_dbname. If out_dbname isn't
* NULL, it must point to a buffer of size NAMEDATALEN.
*
* In bootstrap mode no parameters are used.
*
* The return value indicates whether the userID is a superuser. (That
* can only be tested inside a transaction, so we want to do it during
* the startup transaction rather than doing a separate one in postgres.c.)
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
void
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char *out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool autovacuum = IsAutoVacuumProcess();
bool am_superuser;
char *fullpath;
char dbname[NAMEDATALEN];
/*
* Add my PGPROC struct to the ProcArray.
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
/* Initialize SessionState entry */
SessionState_Init();
/* Initialize memory protection */
GPMemoryProtect_Init();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit(false);
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/* Now that we have a BackendId, we can participate in ProcSignal */
ProcSignalInit(MyBackendId);
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG. In bootstrap case we may
* skip this since StartupXLOG() was run instead.
*/
if (!bootstrap)
InitXLOGAccess();
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Load relcache entries for the shared system catalogs. This must create
* at least entries for pg_database and catalogs used for authentication.
*/
RelationCacheInitializePhase2();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This has to
* be after we've initialized all the low-level modules like the buffer
* manager, because during shutdown this has to run before the low-level
* modules start to close down. On the other hand, we want it in place
* before we begin our first transaction --- if we fail during the
* initialization transaction, as is entirely possible, we need the
* AbortTransaction call to clean up.
*/
on_shmem_exit(ShutdownPostgres, 0);
/* TODO: autovacuum launcher should be done here? */
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin.
*/
if (!bootstrap)
{
StartTransactionCommand();
(void) GetTransactionSnapshot();
}
/*
* Figure out our postgres user id, and see if we are a superuser.
*
* In standalone mode and in the autovacuum process, we use a fixed id,
* otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || autovacuum)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" CREATEUSER;.",
username)));
}
else
{
/* normal multiuser case */
Assert(MyProcPort != NULL);
PerformAuthentication(MyProcPort);
InitializeSessionUserId(username);
am_superuser = superuser();
}
/*
* Check a normal user hasn't connected to a superuser reserved slot.
*/
if (!am_superuser &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers"),
errSendAlert(true)));
/*
* If walsender, we don't want to connect to any particular database. Just
* finish the backend startup by processing any options from the startup
* packet, and we're done.
*/
if (am_walsender)
{
Assert(!bootstrap);
/*
* We don't have replication role, which existed in postgres.
*/
if (!superuser())
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("must be superuser role to start walsender")));
/* process any options passed in the startup packet */
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
pgstat_bestart();
/* close the transaction we started above */
CommitTransactionCommand();
return;
}
/*
* Set up the global variables holding database id and path. But note we
* won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db name in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else if (in_dbname != NULL)
{
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTuple(in_dbname);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", in_dbname)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
/* take database name from the caller, just for paranoia */
strlcpy(dbname, in_dbname, sizeof(dbname));
pfree(tuple);
}
else
{
/* caller specified database by OID */
HeapTuple tuple;
Form_pg_database dbform;
tuple = GetDatabaseTupleByOid(dboid);
if (!HeapTupleIsValid(tuple))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid)));
dbform = (Form_pg_database) GETSTRUCT(tuple);
MyDatabaseId = HeapTupleGetOid(tuple);
MyDatabaseTableSpace = dbform->dattablespace;
Assert(MyDatabaseId == dboid);
strlcpy(dbname, NameStr(dbform->datname), sizeof(dbname));
/* pass the database name back to the caller */
if (out_dbname)
strcpy(out_dbname, dbname);
pfree(tuple);
}
/* Now we can mark our PGPROC entry with the database ID */
/* (We assume this is an atomic store so no lock is needed) */
MyProc->databaseId = MyDatabaseId;
/*
* Now, take a writer's lock on the database we are trying to connect to.
* If there is a concurrently running DROP DATABASE on that database, this
* will block us until it finishes (and has committed its update of
* pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we are already advertising our use of
* the database in the PGPROC array; anyone trying a DROP DATABASE after
* this point will see us there.
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
/*
* Recheck pg_database to make sure the target database hasn't gone away.
* If there was a concurrent DROP DATABASE, this ensures we will die
* cleanly without creating a mess.
*/
if (!bootstrap)
{
HeapTuple tuple;
tuple = GetDatabaseTuple(dbname);
if (!HeapTupleIsValid(tuple) ||
MyDatabaseId != HeapTupleGetOid(tuple) ||
MyDatabaseTableSpace != ((Form_pg_database) GETSTRUCT(tuple))->dattablespace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist", dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
if (!bootstrap)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
SetDatabasePath(fullpath);
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase3();
/*
* Now we have full access to catalog including toast tables,
* we can process pg_authid.rolconfig. This ought to come before
* processing startup options so that it can override the settings.
*/
if (!bootstrap)
ProcessRoleGUC();
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/*
* Re-read the pg_database row for our database, check permissions and set
* up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap)
CheckMyDatabase(dbname, am_superuser);
/*
* Now process any command-line switches and any additional GUC variable
* settings passed in the startup packet. We couldn't do this before
* because we didn't know if client is a superuser.
*/
if (MyProcPort != NULL)
process_startup_options(MyProcPort, am_superuser);
/*
* Maintenance Mode: allow superuser to connect when
* gp_maintenance_conn GUC is set. We cannot check it until
* process_startup_options parses the GUC.
*/
if (gp_maintenance_mode && Gp_role == GP_ROLE_DISPATCH &&
!(superuser() && gp_maintenance_conn))
ereport(FATAL,
(errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
errmsg("maintenance mode: connected by superuser only"),
errSendAlert(false)));
/*
* MPP: If we were started in utility mode then we only want to allow
* incoming sessions that specify gp_session_role=utility as well. This
* lets the bash scripts start the QD in utility mode and connect in but
* protect ourselves from normal clients who might be trying to connect to
* the system while we startup.
*/
if ((Gp_role == GP_ROLE_UTILITY) && (Gp_session_role != GP_ROLE_UTILITY))
{
ereport(FATAL,
(errcode(ERRCODE_CANNOT_CONNECT_NOW),
errmsg("System was started in master-only utility mode - only utility mode connections are allowed")));
}
/* Apply PostAuthDelay as soon as we've read all options */
if (PostAuthDelay > 0)
pg_usleep(PostAuthDelay * 1000000L);
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/*
* MPP package setup
*
* Primary function is to establish connctions to the qExecs.
* This is SKIPPED when the database is in bootstrap mode or
* Is not UnderPostmaster.
*/
if (!bootstrap && IsUnderPostmaster)
{
cdb_setup();
on_proc_exit( cdb_cleanup, 0 );
}
/*
* MPP SharedSnapshot Setup
*/
if (Gp_role == GP_ROLE_DISPATCH)
{
addSharedSnapshot("Query Dispatcher", gp_session_id);
}
else if (Gp_role == GP_ROLE_DISPATCHAGENT)
{
SharedLocalSnapshotSlot = NULL;
}
else if (Gp_segment == -1 && Gp_role == GP_ROLE_EXECUTE && !Gp_is_writer)
{
/*
* Entry db singleton QE is a user of the shared snapshot -- not a creator.
* The lookup will occur once the distributed snapshot has been received.
*/
lookupSharedSnapshot("Entry DB Singleton", "Query Dispatcher", gp_session_id);
}
else if (Gp_role == GP_ROLE_EXECUTE)
{
if (Gp_is_writer)
{
addSharedSnapshot("Writer qExec", gp_session_id);
}
else
{
/*
* NOTE: This assumes that the Slot has already been
* allocated by the writer. Need to make sure we
* always allocate the writer qExec first.
*/
lookupSharedSnapshot("Reader qExec", "Writer qExec", gp_session_id);
}
}
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
return;
}
CatCache *
InitCatCache(int id,
Oid reloid,
Oid indexoid,
int nkeys,
const int *key,
int nbuckets)
{
CatCache *cp;
MemoryContext oldcxt;
int i;
/*
* nbuckets is the number of hash buckets to use in this catcache.
* Currently we just use a hard-wired estimate of an appropriate size for
* each cache; maybe later make them dynamically resizable?
*
* nbuckets must be a power of two. We check this via Assert rather than
* a full runtime check because the values will be coming from constant
* tables.
*
* If you're confused by the power-of-two check, see comments in
* bitmapset.c for an explanation.
*/
Assert(nbuckets > 0 && (nbuckets & -nbuckets) == nbuckets);
/*
* first switch to the cache context so our allocations do not vanish at
* the end of a transaction
*/
if (!CacheMemoryContext)
CreateCacheMemoryContext();
oldcxt = MemoryContextSwitchTo(CacheMemoryContext);
/*
* if first time through, initialize the cache group header
*/
if (CacheHdr == NULL)
{
CacheHdr = (CatCacheHeader *) palloc(sizeof(CatCacheHeader));
CacheHdr->ch_caches = NULL;
CacheHdr->ch_ntup = 0;
#ifdef CATCACHE_STATS
/* set up to dump stats at backend exit */
on_proc_exit(CatCachePrintStats, 0);
#endif
}
/*
* allocate a new cache structure
*
* Note: we assume zeroing initializes the Dllist headers correctly
*/
cp = (CatCache *) palloc0(sizeof(CatCache) + nbuckets * sizeof(Dllist));
/*
* initialize the cache's relation information for the relation
* corresponding to this cache, and initialize some of the new cache's
* other internal fields. But don't open the relation yet.
*/
cp->id = id;
cp->cc_relname = "(not known yet)";
cp->cc_reloid = reloid;
cp->cc_indexoid = indexoid;
cp->cc_relisshared = false; /* temporary */
cp->cc_tupdesc = (TupleDesc) NULL;
cp->cc_ntup = 0;
cp->cc_nbuckets = nbuckets;
cp->cc_nkeys = nkeys;
for (i = 0; i < nkeys; ++i)
cp->cc_key[i] = key[i];
/*
* new cache is initialized as far as we can go for now. print some
* debugging information, if appropriate.
*/
InitCatCache_DEBUG2;
/*
* add completed cache to top of group header's list
*/
cp->cc_next = CacheHdr->ch_caches;
CacheHdr->ch_caches = cp;
/*
* back to the old context before we return...
*/
MemoryContextSwitchTo(oldcxt);
return cp;
}
/* --------------------------------
* InitPostgres
* Initialize POSTGRES.
*
* The database can be specified by name, using the in_dbname parameter, or by
* OID, using the dboid parameter. In the latter case, the computed database
* name is passed out to the caller as a palloc'ed string in out_dbname.
*
* In bootstrap mode no parameters are used.
*
* The return value indicates whether the userID is a superuser. (That
* can only be tested inside a transaction, so we want to do it during
* the startup transaction rather than doing a separate one in postgres.c.)
*
* As of PostgreSQL 8.2, we expect InitProcess() was already called, so we
* already have a PGPROC struct ... but it's not filled in yet.
*
* Note:
* Be very careful with the order of calls in the InitPostgres function.
* --------------------------------
*/
bool
InitPostgres(const char *in_dbname, Oid dboid, const char *username,
char **out_dbname)
{
bool bootstrap = IsBootstrapProcessingMode();
bool autovacuum = IsAutoVacuumProcess();
bool am_superuser;
char *fullpath;
char dbname[NAMEDATALEN];
/*
* Set up the global variables holding database id and path. But note we
* won't actually try to touch the database just yet.
*
* We take a shortcut in the bootstrap case, otherwise we have to look up
* the db name in pg_database.
*/
if (bootstrap)
{
MyDatabaseId = TemplateDbOid;
MyDatabaseTableSpace = DEFAULTTABLESPACE_OID;
}
else
{
/*
* Find tablespace of the database we're about to open. Since we're
* not yet up and running we have to use one of the hackish
* FindMyDatabase variants, which look in the flat-file copy of
* pg_database.
*
* If the in_dbname param is NULL, lookup database by OID.
*/
if (in_dbname == NULL)
{
if (!FindMyDatabaseByOid(dboid, dbname, &MyDatabaseTableSpace))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database %u does not exist", dboid),
errSendAlert(false)));
MyDatabaseId = dboid;
/* pass the database name to the caller */
*out_dbname = pstrdup(dbname);
}
else
{
if (!FindMyDatabase(in_dbname, &MyDatabaseId, &MyDatabaseTableSpace))
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
in_dbname),
errOmitLocation(true),
errSendAlert(false)));
/* our database name is gotten from the caller */
strlcpy(dbname, in_dbname, NAMEDATALEN);
}
}
fullpath = GetDatabasePath(MyDatabaseId, MyDatabaseTableSpace);
SetDatabasePath(fullpath);
/*
* Finish filling in the PGPROC struct, and add it to the ProcArray. (We
* need to know MyDatabaseId before we can do this, since it's entered
* into the PGPROC struct.)
*
* Once I have done this, I am visible to other backends!
*/
InitProcessPhase2();
// get temporary directory for QD
if (!bootstrap && Gp_role == GP_ROLE_DISPATCH)
{
if (get_tmpdir_from_rm)
{
getLocalTmpDirFromMasterRM();
}
else
{
getLocalTmpDirFromMasterConfig(gp_session_id);
elog(LOG, "getLocalTmpDirFromMasterConfig session_id:%d tmpdir:%s", gp_session_id, LocalTempPath);
}
}
/* Initialize SessionState entry */
SessionState_Init();
/* Initialize memory protection */
GPMemoryProtect_Init();
/*
* Initialize my entry in the shared-invalidation manager's array of
* per-backend data.
*
* Sets up MyBackendId, a unique backend identifier.
*/
MyBackendId = InvalidBackendId;
SharedInvalBackendInit(false);
if (MyBackendId > MaxBackends || MyBackendId <= 0)
elog(FATAL, "bad backend id: %d", MyBackendId);
/* Now that we have a BackendId, we can participate in ProcSignal */
ProcSignalInit(MyBackendId);
/*
* bufmgr needs another initialization call too
*/
InitBufferPoolBackend();
/*
* Initialize local process's access to XLOG. In bootstrap case we may
* skip this since StartupXLOG() was run instead.
*/
if (!bootstrap)
InitXLOGAccess();
/*
* Initialize the relation cache and the system catalog caches. Note that
* no catalog access happens here; we only set up the hashtable structure.
* We must do this before starting a transaction because transaction abort
* would try to touch these hashtables.
*/
RelationCacheInitialize();
InitCatalogCache();
/* Initialize portal manager */
EnablePortalManager();
/* Initialize stats collection --- must happen before first xact */
if (!bootstrap)
pgstat_initialize();
/*
* Set up process-exit callback to do pre-shutdown cleanup. This has to
* be after we've initialized all the low-level modules like the buffer
* manager, because during shutdown this has to run before the low-level
* modules start to close down. On the other hand, we want it in place
* before we begin our first transaction --- if we fail during the
* initialization transaction, as is entirely possible, we need the
* AbortTransaction call to clean up.
*/
on_shmem_exit(ShutdownPostgres, 0);
/*
* Start a new transaction here before first access to db, and get a
* snapshot. We don't have a use for the snapshot itself, but we're
* interested in the secondary effect that it sets RecentGlobalXmin.
*/
if (!bootstrap)
{
StartTransactionCommand();
(void) GetTransactionSnapshot();
}
/*
* Now that we have a transaction, we can take locks. Take a writer's
* lock on the database we are trying to connect to. If there is a
* concurrently running DROP DATABASE on that database, this will block us
* until it finishes (and has updated the flat file copy of pg_database).
*
* Note that the lock is not held long, only until the end of this startup
* transaction. This is OK since we are already advertising our use of
* the database in the PGPROC array; anyone trying a DROP DATABASE after
* this point will see us there.
*
* Note: use of RowExclusiveLock here is reasonable because we envision
* our session as being a concurrent writer of the database. If we had a
* way of declaring a session as being guaranteed-read-only, we could use
* AccessShareLock for such sessions and thereby not conflict against
* CREATE DATABASE.
*/
if (!bootstrap)
{
if (MyDatabaseId == TemplateDbOid)
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
AccessShareLock);
else
LockSharedObject(DatabaseRelationId, MyDatabaseId, 0,
RowExclusiveLock);
}
/*
* Recheck the flat file copy of pg_database to make sure the target
* database hasn't gone away. If there was a concurrent DROP DATABASE,
* this ensures we will die cleanly without creating a mess.
*/
if (!bootstrap)
{
Oid dbid2;
Oid tsid2;
if (!FindMyDatabase(dbname, &dbid2, &tsid2) ||
dbid2 != MyDatabaseId || tsid2 != MyDatabaseTableSpace)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("It seems to have just been dropped or renamed.")));
}
/*
* Now we should be able to access the database directory safely. Verify
* it's there and looks reasonable.
*/
if (!bootstrap)
{
if (access(fullpath, F_OK) == -1)
{
if (errno == ENOENT)
ereport(FATAL,
(errcode(ERRCODE_UNDEFINED_DATABASE),
errmsg("database \"%s\" does not exist",
dbname),
errdetail("The database subdirectory \"%s\" is missing.",
fullpath)));
else
ereport(FATAL,
(errcode_for_file_access(),
errmsg("could not access directory \"%s\": %m",
fullpath)));
}
ValidatePgVersion(fullpath);
}
/*
* It's now possible to do real access to the system catalogs.
*
* Load relcache entries for the system catalogs. This must create at
* least the minimum set of "nailed-in" cache entries.
*/
RelationCacheInitializePhase2();
/*
* Figure out our postgres user id, and see if we are a superuser.
*
* In standalone mode and in the autovacuum process, we use a fixed id,
* otherwise we figure it out from the authenticated user name.
*/
if (bootstrap || autovacuum)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
}
else if (!IsUnderPostmaster)
{
InitializeSessionUserIdStandalone();
am_superuser = true;
if (!ThereIsAtLeastOneRole())
ereport(WARNING,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("no roles are defined in this database system"),
errhint("You should immediately run CREATE USER \"%s\" CREATEUSER;.",
username)));
}
else
{
/* normal multiuser case */
InitializeSessionUserId(username);
am_superuser = superuser();
}
/* set up ACL framework (so CheckMyDatabase can check permissions) */
initialize_acl();
/*
* Read the real pg_database row for our database, check permissions and
* set up database-specific GUC settings. We can't do this until all the
* database-access infrastructure is up. (Also, it wants to know if the
* user is a superuser, so the above stuff has to happen first.)
*/
if (!bootstrap)
CheckMyDatabase(dbname, am_superuser);
/*
* Check a normal user hasn't connected to a superuser reserved slot.
*/
if (!am_superuser &&
ReservedBackends > 0 &&
!HaveNFreeProcs(ReservedBackends))
ereport(FATAL,
(errcode(ERRCODE_TOO_MANY_CONNECTIONS),
errmsg("connection limit exceeded for non-superusers"),
errOmitLocation(true),
errSendAlert(true)));
/*
* Initialize various default states that can't be set up until we've
* selected the active user and gotten the right GUC settings.
*/
/* set default namespace search path */
InitializeSearchPath();
/* initialize client encoding */
InitializeClientEncoding();
/* report this backend in the PgBackendStatus array */
if (!bootstrap)
pgstat_bestart();
/*
* MPP package setup
*
* Primary function is to establish connctions to the qExecs.
* This is SKIPPED when the database is in bootstrap mode or
* Is not UnderPostmaster.
*/
if (!bootstrap && IsUnderPostmaster)
{
cdb_setup();
on_proc_exit( cdb_cleanup, 0 );
}
/* close the transaction we started above */
if (!bootstrap)
CommitTransactionCommand();
return am_superuser;
}
/*
* JVMInitialization
* Create the JVM which will be used for calling the Java routines
* that use JDBC to connect and access the foreign database.
*
*/
static void
JVMInitialization(Oid foreigntableid)
{
jint res = -5;/* Initializing the value of res so that we can check it later to see whether JVM has been correctly created or not*/
JavaVMInitArgs vm_args;
JavaVMOption *options;
static bool FunctionCallCheck = false; /* This flag safeguards against multiple calls of JVMInitialization().*/
char strpkglibdir[] = STR_PKGLIBDIR;
char *classpath;
char *svr_drivername = NULL;
char *svr_url = NULL;
char *svr_username = NULL;
char *svr_password = NULL;
char *svr_query = NULL;
char *svr_table = NULL;
char *svr_jarfile = NULL;
char *maxheapsizeoption = NULL;
int svr_querytimeout = 0;
int svr_maxheapsize = 0;
jdbcGetOptions(
foreigntableid,
&svr_drivername,
&svr_url,
&svr_querytimeout,
&svr_jarfile,
&svr_maxheapsize,
&svr_username,
&svr_password,
&svr_query,
&svr_table
);
SIGINTInterruptCheckProcess();
if (FunctionCallCheck == false)
{
classpath = (char*)palloc(strlen(strpkglibdir) + 19);
snprintf(classpath, strlen(strpkglibdir) + 19, "-Djava.class.path=%s", strpkglibdir);
if (svr_maxheapsize != 0) /* If the user has given a value for setting the max heap size of the JVM */
{
options = (JavaVMOption*)palloc(sizeof(JavaVMOption)*2);
maxheapsizeoption = (char*)palloc(sizeof(int) + 6);
snprintf(maxheapsizeoption, sizeof(int) + 6, "-Xmx%dm", svr_maxheapsize);
options[0].optionString = classpath;
options[1].optionString = maxheapsizeoption;
vm_args.nOptions = 2;
}
else
{
options = (JavaVMOption*)palloc(sizeof(JavaVMOption));
options[0].optionString = classpath;
vm_args.nOptions = 1;
}
vm_args.version = 0x00010002;
vm_args.options = options;
vm_args.ignoreUnrecognized = JNI_FALSE;
/* Create the Java VM */
res = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if (res < 0)
{
ereport(ERROR,
(errmsg("Failed to create Java VM")
));
}
InterruptFlag = false;
/* Register an on_proc_exit handler that shuts down the JVM.*/
on_proc_exit(DestroyJVM, 0);
FunctionCallCheck = true;
}
}
CatCache *
InitCatCache(int id,
const char *relname,
const char *indname,
int reloidattr,
int nkeys,
const int *key)
{
CatCache *cp;
MemoryContext oldcxt;
int i;
/*
* first switch to the cache context so our allocations do not vanish
* at the end of a transaction
*/
if (!CacheMemoryContext)
CreateCacheMemoryContext();
oldcxt = MemoryContextSwitchTo(CacheMemoryContext);
/*
* if first time through, initialize the cache group header, including
* global LRU list header
*/
if (CacheHdr == NULL)
{
CacheHdr = (CatCacheHeader *) palloc(sizeof(CatCacheHeader));
CacheHdr->ch_caches = NULL;
CacheHdr->ch_ntup = 0;
CacheHdr->ch_maxtup = MAXCCTUPLES;
DLInitList(&CacheHdr->ch_lrulist);
#ifdef CATCACHE_STATS
on_proc_exit(CatCachePrintStats, 0);
#endif
}
/*
* allocate a new cache structure
*
* Note: we assume zeroing initializes the Dllist headers correctly
*/
cp = (CatCache *) palloc0(sizeof(CatCache) + NCCBUCKETS * sizeof(Dllist));
/*
* initialize the cache's relation information for the relation
* corresponding to this cache, and initialize some of the new cache's
* other internal fields. But don't open the relation yet.
*/
cp->id = id;
cp->cc_relname = relname;
cp->cc_indname = indname;
cp->cc_reloid = InvalidOid; /* temporary */
cp->cc_relisshared = false; /* temporary */
cp->cc_tupdesc = (TupleDesc) NULL;
cp->cc_reloidattr = reloidattr;
cp->cc_ntup = 0;
cp->cc_nbuckets = NCCBUCKETS;
cp->cc_nkeys = nkeys;
for (i = 0; i < nkeys; ++i)
cp->cc_key[i] = key[i];
/*
* new cache is initialized as far as we can go for now. print some
* debugging information, if appropriate.
*/
InitCatCache_DEBUG2;
/*
* add completed cache to top of group header's list
*/
cp->cc_next = CacheHdr->ch_caches;
CacheHdr->ch_caches = cp;
/*
* back to the old context before we return...
*/
MemoryContextSwitchTo(oldcxt);
return cp;
}
