owerror_t idmanager_setMyID(open_addr_t* newID) {
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
switch (newID->type) {
case ADDR_16B:
memcpy(&idmanager_vars.my16bID,newID,sizeof(open_addr_t));
break;
case ADDR_64B:
memcpy(&idmanager_vars.my64bID,newID,sizeof(open_addr_t));
break;
case ADDR_PANID:
memcpy(&idmanager_vars.myPANID,newID,sizeof(open_addr_t));
break;
case ADDR_PREFIX:
memcpy(&idmanager_vars.myPrefix,newID,sizeof(open_addr_t));
break;
case ADDR_128B:
//don't set 128b, but rather prefix and 64b
default:
openserial_printCritical(COMPONENT_IDMANAGER,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)newID->type,
(errorparameter_t)1);
ENABLE_INTERRUPTS();
return E_FAIL;
}
ENABLE_INTERRUPTS();
return E_SUCCESS;
}
/**
\brief Indicate whether some neighbor is a stable neighbor
\param[in] address The address of the neighbor, a full 128-bit IPv6 addres.
\returns TRUE if that neighbor is stable, FALSE otherwise.
*/
bool neighbors_isStableNeighbor(open_addr_t* address) {
uint8_t i;
open_addr_t temp_addr_64b;
open_addr_t temp_prefix;
bool returnVal;
// by default, not stable
returnVal = FALSE;
// but neighbor's IPv6 address in prefix and EUI64
switch (address->type) {
case ADDR_128B:
packetfunctions_ip128bToMac64b(address,&temp_prefix,&temp_addr_64b);
break;
default:
openserial_printCritical(COMPONENT_NEIGHBORS,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)address->type,
(errorparameter_t)0);
return returnVal;
}
// iterate through neighbor table
for (i=0;i<MAXNUMNEIGHBORS;i++) {
if (isThisRowMatching(&temp_addr_64b,i) && neighbors_vars.neighbors[i].stableNeighbor==TRUE) {
returnVal = TRUE;
break;
}
}
return returnVal;
}
open_addr_t* idmanager_getMyID(uint8_t type) {
open_addr_t* res;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
switch (type) {
case ADDR_16B:
res= &idmanager_vars.my16bID;
break;
case ADDR_64B:
res= &idmanager_vars.my64bID;
break;
case ADDR_PANID:
res= &idmanager_vars.myPANID;
break;
case ADDR_PREFIX:
res= &idmanager_vars.myPrefix;
break;
case ADDR_128B:
// you don't ask for my full address, rather for prefix, then 64b
default:
openserial_printCritical(COMPONENT_IDMANAGER,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)type,
(errorparameter_t)0);
res= NULL;
break;
}
ENABLE_INTERRUPTS();
return res;
}
/**
\brief Free a previously-allocated packet buffer.
\param pkt A pointer to the previsouly-allocated packet buffer.
\returns E_SUCCESS when the freeing was succeful.
\returns E_FAIL when the module could not find the specified packet buffer.
*/
owerror_t openqueue_freePacketBuffer(OpenQueueEntry_t* pkt) {
uint8_t i;
uint8_t *pucAux = (uint8_t *) pkt;
uint8_t creator;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
for (i=0;i<QUEUELENGTH;i++) {
if (&openqueue_vars.queue[i]==pkt) {
if (openqueue_vars.queue[i].owner==COMPONENT_NULL) {
// log the error
openserial_printCritical(COMPONENT_OPENQUEUE,ERR_FREEING_UNUSED,
(errorparameter_t)0,
(errorparameter_t)0);
}
creator = openqueue_vars.queue[i].creator;
openqueue_reset_entry(&(openqueue_vars.queue[i]));
ENABLE_INTERRUPTS();
#if ((ENABLE_DEBUG_RFF ==1) && (DBG_OPENQUEUE == 1))
{
uint8_t pos=0;
rffbuf[pos++]= RFF_OPENQUEUE_FREE;
rffbuf[pos++]= 0x01;
rffbuf[pos++]= creator;
rffbuf[pos++]= i;
rffbuf[pos++]= pucAux++;
rffbuf[pos++]= pucAux++;
rffbuf[pos++]= pucAux++;
rffbuf[pos++]= pucAux;
openserial_printStatus(STATUS_RFF,(uint8_t*)&rffbuf,pos);
}
#endif
return E_SUCCESS;
}
}
// log the error
openserial_printCritical(COMPONENT_OPENQUEUE,ERR_FREEING_ERROR,
(errorparameter_t)0,
(errorparameter_t)0);
ENABLE_INTERRUPTS();
return E_FAIL;
}
/**
\brief Write the 64-bit address of some neighbor to some location.
*/
void neighbors_getNeighbor(open_addr_t* address, uint8_t addr_type, uint8_t index){
switch(addr_type) {
case ADDR_64B:
memcpy(&(address->addr_64b),&(neighbors_vars.neighbors[index].addr_64b.addr_64b),LENGTH_ADDR64b);
address->type=ADDR_64B;
break;
default:
openserial_printCritical(COMPONENT_NEIGHBORS,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)addr_type,
(errorparameter_t)1);
break;
}
}
/**
\brief Free a previously-allocated packet buffer.
\param pkt A pointer to the previsouly-allocated packet buffer.
\returns E_SUCCESS when the freeing was succeful.
\returns E_FAIL when the module could not find the specified packet buffer.
*/
owerror_t openqueue_freePacketBuffer(OpenQueueEntry_t* pkt) {
uint8_t i;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
for (i=0;i<QUEUELENGTH;i++) {
if (&openqueue_vars.queue[i]==pkt) {
if (openqueue_vars.queue[i].owner==COMPONENT_NULL) {
// log the error
openserial_printCritical(COMPONENT_OPENQUEUE,ERR_FREEING_UNUSED,
(errorparameter_t)0,
(errorparameter_t)0);
}
openqueue_reset_entry(&(openqueue_vars.queue[i]));
ENABLE_INTERRUPTS();
return E_SUCCESS;
}
}
// log the error
openserial_printCritical(COMPONENT_OPENQUEUE,ERR_FREEING_ERROR,
(errorparameter_t)0,
(errorparameter_t)0);
ENABLE_INTERRUPTS();
return E_FAIL;
}
void icmpv6_sendDone(OpenQueueEntry_t* msg, error_t error) {
msg->owner = COMPONENT_ICMPv6;
switch (msg->l4_sourcePortORicmpv6Type) {
case IANA_ICMPv6_ECHO_REQUEST:
case IANA_ICMPv6_ECHO_REPLY:
icmpv6echo_sendDone(msg, error);
break;
case IANA_ICMPv6_RPL:
icmpv6rpl_sendDone(msg, error);
break;
default:
openserial_printCritical(COMPONENT_ICMPv6,ERR_UNSUPPORTED_ICMPV6_TYPE,
(errorparameter_t)msg->l4_sourcePortORicmpv6Type,
(errorparameter_t)0);
// free the corresponding packet buffer
openqueue_freePacketBuffer(msg);
break;
}
}
bool idmanager_isMyAddress(open_addr_t* addr) {
open_addr_t temp_my128bID;
bool res;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
switch (addr->type) {
case ADDR_16B:
res= packetfunctions_sameAddress(addr,&idmanager_vars.my16bID);
ENABLE_INTERRUPTS();
return res;
case ADDR_64B:
res= packetfunctions_sameAddress(addr,&idmanager_vars.my64bID);
ENABLE_INTERRUPTS();
return res;
case ADDR_128B:
//build temporary my128bID
temp_my128bID.type = ADDR_128B;
memcpy(&temp_my128bID.addr_128b[0],&idmanager_vars.myPrefix.prefix,8);
memcpy(&temp_my128bID.addr_128b[8],&idmanager_vars.my64bID.addr_64b,8);
res= packetfunctions_sameAddress(addr,&temp_my128bID);
ENABLE_INTERRUPTS();
return res;
case ADDR_PANID:
res= packetfunctions_sameAddress(addr,&idmanager_vars.myPANID);
ENABLE_INTERRUPTS();
return res;
case ADDR_PREFIX:
res= packetfunctions_sameAddress(addr,&idmanager_vars.myPrefix);
ENABLE_INTERRUPTS();
return res;
default:
openserial_printCritical(COMPONENT_IDMANAGER,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)addr->type,
(errorparameter_t)2);
ENABLE_INTERRUPTS();
return FALSE;
}
}
/**
\brief Indicates a packet has been sent.
\param[in,out] msg The packet just sent.
\param[in] error The outcome of sending it.
*/
void forwarding_sendDone(OpenQueueEntry_t* msg, owerror_t error) {
// take ownership
msg->owner = COMPONENT_FORWARDING;
if (msg->creator==COMPONENT_RADIO || msg->creator==COMPONENT_FORWARDING) {
// this is a relayed packet
// free packet
openqueue_freePacketBuffer(msg);
} else {
// this is a packet created by this mote
// indicate sendDone to upper layer
switch(msg->l4_protocol) {
case IANA_TCP:
opentcp_sendDone(msg,error);
break;
case IANA_UDP:
openudp_sendDone(msg,error);
break;
case IANA_ICMPv6:
icmpv6_sendDone(msg,error);
break;
default:
// log error
openserial_printCritical(
COMPONENT_FORWARDING,
ERR_WRONG_TRAN_PROTOCOL,
(errorparameter_t)msg->l4_protocol,
(errorparameter_t)0
);
// free packet
openqueue_freePacketBuffer(msg);
}
}
}
/**
\brief Called when RPL message received.
\param[in] msg Pointer to the received message.
*/
void icmpv6rpl_receive(OpenQueueEntry_t* msg) {
uint8_t icmpv6code;
open_addr_t myPrefix;
// take ownership
msg->owner = COMPONENT_ICMPv6RPL;
// retrieve ICMPv6 code
icmpv6code = (((ICMPv6_ht*)(msg->payload))->code);
// toss ICMPv6 header
packetfunctions_tossHeader(msg,sizeof(ICMPv6_ht));
// handle message
switch (icmpv6code) {
case IANA_ICMPv6_RPL_DIO:
if (idmanager_getIsBridge()==TRUE) {
// stop here if I'm in bridge mode
break; // break, don't return
}
// update neighbor table
neighbors_indicateRxDIO(msg);
// update DODAGID in DIO/DAO
memcpy(
&(icmpv6rpl_vars.dio.DODAGID[0]),
&(((icmpv6rpl_dio_ht*)(msg->payload))->DODAGID[0]),
sizeof(icmpv6rpl_vars.dio.DODAGID)
);
memcpy(
&(icmpv6rpl_vars.dao.DODAGID[0]),
&(((icmpv6rpl_dio_ht*)(msg->payload))->DODAGID[0]),
sizeof(icmpv6rpl_vars.dao.DODAGID)
);
// remember I got a DODAGID
icmpv6rpl_vars.DODAGIDFlagSet=1;
// update my prefix
myPrefix.type = ADDR_PREFIX;
memcpy(
myPrefix.prefix,
&((icmpv6rpl_dio_ht*)(msg->payload))->DODAGID[0],
sizeof(myPrefix.prefix)
);
idmanager_setMyID(&myPrefix);
break;
case IANA_ICMPv6_RPL_DAO:
// this should never happen
openserial_printCritical(COMPONENT_ICMPv6RPL,ERR_UNEXPECTED_DAO,
(errorparameter_t)0,
(errorparameter_t)0);
break;
default:
// this should never happen
openserial_printCritical(COMPONENT_ICMPv6RPL,ERR_MSG_UNKNOWN_TYPE,
(errorparameter_t)icmpv6code,
(errorparameter_t)0);
break;
}
// free message
openqueue_freePacketBuffer(msg);
}
/**
\brief Add a new active slot into the schedule.
If udpate param is set then update it in case it exists.
\param slotOffset
\param type
\param shared
\param channelOffset
\param neighbor
\param isUpdate
*/
owerror_t schedule_addActiveSlot(
slotOffset_t slotOffset,
cellType_t type,
bool shared,
channelOffset_t channelOffset,
open_addr_t* neighbor,
bool isUpdate
) {
owerror_t outcome;
scheduleEntry_t* slotContainer;
scheduleEntry_t* previousSlotWalker;
scheduleEntry_t* nextSlotWalker;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
// find an empty schedule entry container
slotContainer = &schedule_vars.scheduleBuf[0];
while (slotContainer->type!=CELLTYPE_OFF &&
slotContainer<=&schedule_vars.scheduleBuf[MAXACTIVESLOTS-1]) {
//check that this entry for that neighbour and timeslot is not already scheduled.
if (type!=CELLTYPE_SERIALRX && type!=CELLTYPE_MORESERIALRX &&
(packetfunctions_sameAddress(neighbor,&(slotContainer->neighbor))||
(slotContainer->neighbor.type==ADDR_ANYCAST && isUpdate==TRUE))
&&(slotContainer->slotOffset==slotOffset)){
//it exists so this is an update.
slotContainer->type = type;
slotContainer->shared = shared;
slotContainer->channelOffset = channelOffset;
memcpy(&slotContainer->neighbor,neighbor,sizeof(open_addr_t));//update the address too!
schedule_dbg.numUpdatedSlotsCur++;
ENABLE_INTERRUPTS();
return E_SUCCESS; //as this is an update. No need to re-insert as it is in the same position on the list.
}
slotContainer++;
}
if (isUpdate==TRUE) {
//we are trying to update an item that is not in the schedule list.
ENABLE_INTERRUPTS();
return E_FAIL;
}
if (slotContainer>&schedule_vars.scheduleBuf[MAXACTIVESLOTS-1]) {
// schedule has overflown
outcome=E_FAIL;
openserial_printCritical(COMPONENT_SCHEDULE,ERR_SCHEDULE_OVERFLOWN,
(errorparameter_t)0,
(errorparameter_t)0);
}
// fill that schedule entry with parameters passed
slotContainer->slotOffset = slotOffset;
slotContainer->type = type;
slotContainer->shared = shared;
slotContainer->channelOffset = channelOffset;
memcpy(&slotContainer->neighbor,neighbor,sizeof(open_addr_t));
if (schedule_vars.currentScheduleEntry==NULL) {
// this is the first active slot added
// the next slot of this slot is this slot
slotContainer->next = slotContainer;
// current slot points to this slot
schedule_vars.currentScheduleEntry = slotContainer;
} else {
// this is NOT the first active slot added
// find position in schedule
previousSlotWalker = schedule_vars.currentScheduleEntry;
while (1) {
nextSlotWalker = previousSlotWalker->next;
if (
(
(previousSlotWalker->slotOffset < slotContainer->slotOffset) &&
(slotContainer->slotOffset < nextSlotWalker->slotOffset)
)
||
(
(previousSlotWalker->slotOffset < slotContainer->slotOffset) &&
(nextSlotWalker->slotOffset <= previousSlotWalker->slotOffset)
)
||
(
(slotContainer->slotOffset < nextSlotWalker->slotOffset) &&
(nextSlotWalker->slotOffset <= previousSlotWalker->slotOffset)
)
) {
break;
}
previousSlotWalker = nextSlotWalker;
}
// insert between previousSlotWalker and nextSlotWalker
previousSlotWalker->next = slotContainer;
slotContainer->next = nextSlotWalker;
}
// maintain debug stats
schedule_dbg.numActiveSlotsCur++;
if (schedule_dbg.numActiveSlotsCur>schedule_dbg.numActiveSlotsMax) {
schedule_dbg.numActiveSlotsMax = schedule_dbg.numActiveSlotsCur;
}
outcome=E_SUCCESS;
ENABLE_INTERRUPTS();
return outcome;
}
/**
\brief Prepend the IEEE802.15.4 MAC header to a (to be transmitted) packet.
Note that we are writing the field from the end of the header to the beginning.
\param[in,out] msg The message to append the header to.
\param[in] frameType Type of IEEE802.15.4 frame.
\param[in] ielistpresent Is the IE list present¿
\param[in] frameVersion IEEE802.15.4 frame version.
\param[in] securityEnabled Is security enabled on this frame?
\param[in] sequenceNumber Sequence number of this frame.
\param[in] nextHop Address of the next hop
*/
void ieee802154_prependHeader(OpenQueueEntry_t* msg,
uint8_t frameType,
uint8_t ielistpresent,
uint8_t frameVersion,
bool securityEnabled,
uint8_t sequenceNumber,
open_addr_t* nextHop) {
uint8_t temp_8b;
//General IEs here (those that are carried in all packets) -- None by now.
// previousHop address (always 64-bit)
packetfunctions_writeAddress(msg,idmanager_getMyID(ADDR_64B),OW_LITTLE_ENDIAN);
// nextHop address
if (packetfunctions_isBroadcastMulticast(nextHop)) {
//broadcast address is always 16-bit
packetfunctions_reserveHeaderSize(msg,sizeof(uint8_t));
*((uint8_t*)(msg->payload)) = 0xFF;
packetfunctions_reserveHeaderSize(msg,sizeof(uint8_t));
*((uint8_t*)(msg->payload)) = 0xFF;
} else {
switch (nextHop->type) {
case ADDR_16B:
case ADDR_64B:
packetfunctions_writeAddress(msg,nextHop,OW_LITTLE_ENDIAN);
break;
default:
openserial_printCritical(COMPONENT_IEEE802154,ERR_WRONG_ADDR_TYPE,
(errorparameter_t)nextHop->type,
(errorparameter_t)1);
}
}
// destpan
packetfunctions_writeAddress(msg,idmanager_getMyID(ADDR_PANID),OW_LITTLE_ENDIAN);
//dsn
packetfunctions_reserveHeaderSize(msg,sizeof(uint8_t));
*((uint8_t*)(msg->payload)) = sequenceNumber;
//fcf (2nd byte)
packetfunctions_reserveHeaderSize(msg,sizeof(uint8_t));
temp_8b = 0;
if (packetfunctions_isBroadcastMulticast(nextHop)) {
temp_8b |= IEEE154_ADDR_SHORT << IEEE154_FCF_DEST_ADDR_MODE;
} else {
switch (nextHop->type) {
case ADDR_16B:
temp_8b |= IEEE154_ADDR_SHORT << IEEE154_FCF_DEST_ADDR_MODE;
break;
case ADDR_64B:
temp_8b |= IEEE154_ADDR_EXT << IEEE154_FCF_DEST_ADDR_MODE;
break;
// no need for a default, since it would have been caught above.
}
}
temp_8b |= IEEE154_ADDR_EXT << IEEE154_FCF_SRC_ADDR_MODE;
//poipoi xv IE list present
temp_8b |= ielistpresent << IEEE154_FCF_IELIST_PRESENT;
temp_8b |= frameVersion << IEEE154_FCF_FRAME_VERSION;
*((uint8_t*)(msg->payload)) = temp_8b;
//fcf (1st byte)
packetfunctions_reserveHeaderSize(msg,sizeof(uint8_t));
temp_8b = 0;
temp_8b |= frameType << IEEE154_FCF_FRAME_TYPE;
temp_8b |= securityEnabled << IEEE154_FCF_SECURITY_ENABLED;
temp_8b |= IEEE154_PENDING_NO_FRAMEPENDING << IEEE154_FCF_FRAME_PENDING;
if (frameType==IEEE154_TYPE_ACK || packetfunctions_isBroadcastMulticast(nextHop)) {
temp_8b |= IEEE154_ACK_NO_ACK_REQ << IEEE154_FCF_ACK_REQ;
} else {
temp_8b |= IEEE154_ACK_YES_ACK_REQ << IEEE154_FCF_ACK_REQ;
}
temp_8b |= IEEE154_PANID_COMPRESSED << IEEE154_FCF_INTRAPAN;
*((uint8_t*)(msg->payload)) = temp_8b;
}
/**
\brief Add a new active slot into the schedule.
\param newFrameLength The new frame length.
*/
void schedule_addActiveSlot(slotOffset_t slotOffset,
cellType_t type,
bool shared,
uint8_t channelOffset,
open_addr_t* neighbor) {
scheduleEntry_t* slotContainer;
scheduleEntry_t* previousSlotWalker;
scheduleEntry_t* nextSlotWalker;
INTERRUPT_DECLARATION();
DISABLE_INTERRUPTS();
// find an empty schedule entry container
slotContainer = &schedule_vars.scheduleBuf[0];
while (slotContainer->type!=CELLTYPE_OFF &&
slotContainer<=&schedule_vars.scheduleBuf[MAXACTIVESLOTS-1]) {
slotContainer++;
}
if (slotContainer>&schedule_vars.scheduleBuf[MAXACTIVESLOTS-1]) {
// schedule has overflown
openserial_printCritical(COMPONENT_SCHEDULE,ERR_SCHEDULE_OVERFLOWN,
(errorparameter_t)0,
(errorparameter_t)0);
}
// fill that schedule entry with parameters passed
slotContainer->slotOffset = slotOffset;
slotContainer->type = type;
slotContainer->shared = shared;
slotContainer->channelOffset = channelOffset;
memcpy(&slotContainer->neighbor,neighbor,sizeof(open_addr_t));
if (schedule_vars.currentScheduleEntry==NULL) {
// this is the first active slot added
// the next slot of this slot is this slot
slotContainer->next = slotContainer;
// current slot points to this slot
schedule_vars.currentScheduleEntry = slotContainer;
} else {
// this is NOT the first active slot added
// find position in schedule
previousSlotWalker = schedule_vars.currentScheduleEntry;
while (1) {
nextSlotWalker = previousSlotWalker->next;
if (
(
(previousSlotWalker->slotOffset < slotContainer->slotOffset) &&
(slotContainer->slotOffset < nextSlotWalker->slotOffset)
)
||
(
(previousSlotWalker->slotOffset < slotContainer->slotOffset) &&
(nextSlotWalker->slotOffset <= previousSlotWalker->slotOffset)
)
||
(
(slotContainer->slotOffset < nextSlotWalker->slotOffset) &&
(nextSlotWalker->slotOffset <= previousSlotWalker->slotOffset)
)
) {
break;
}
previousSlotWalker = nextSlotWalker;
}
// insert between previousSlotWalker and nextSlotWalker
previousSlotWalker->next = slotContainer;
slotContainer->next = nextSlotWalker;
}
// maintain debug stats
schedule_dbg.numActiveSlotsCur++;
if (schedule_dbg.numActiveSlotsCur>schedule_dbg.numActiveSlotsMax) {
schedule_dbg.numActiveSlotsMax = schedule_dbg.numActiveSlotsCur;
}
ENABLE_INTERRUPTS();
}
void task_sixtopNotifReceive() {
OpenQueueEntry_t* msg;
uint16_t lenIE;
// get received packet from openqueue
msg = openqueue_sixtopGetReceivedPacket();
if (msg==NULL) {
openserial_printCritical(
COMPONENT_SIXTOP,
ERR_NO_RECEIVED_PACKET,
(errorparameter_t)0,
(errorparameter_t)0
);
return;
}
// take ownership
msg->owner = COMPONENT_SIXTOP;
// process the header IEs
lenIE=0;
if(
msg->l2_frameType==IEEE154_TYPE_DATA &&
msg->l2_IEListPresent==IEEE154_IELIST_YES &&
sixtop_processIEs(msg, &lenIE) == FALSE
) {
// free the packet's RAM memory
openqueue_freePacketBuffer(msg);
//log error
return;
}
// toss the header IEs
packetfunctions_tossHeader(msg,lenIE);
// update neighbor statistics
neighbors_indicateRx(
&(msg->l2_nextORpreviousHop),
msg->l1_rssi,
&msg->l2_asn,
msg->l2_joinPriorityPresent,
msg->l2_joinPriority
);
// reset it to avoid race conditions with this var.
msg->l2_joinPriorityPresent = FALSE;
// send the packet up the stack, if it qualifies
switch (msg->l2_frameType) {
case IEEE154_TYPE_BEACON:
case IEEE154_TYPE_DATA:
case IEEE154_TYPE_CMD:
if (msg->length>0) {
// send to upper layer
iphc_receive(msg);
} else {
// free up the RAM
openqueue_freePacketBuffer(msg);
}
break;
case IEEE154_TYPE_ACK:
default:
// free the packet's RAM memory
openqueue_freePacketBuffer(msg);
// log the error
openserial_printError(
COMPONENT_SIXTOP,
ERR_MSG_UNKNOWN_TYPE,
(errorparameter_t)msg->l2_frameType,
(errorparameter_t)0
);
break;
}
}
void task_sixtopNotifSendDone() {
OpenQueueEntry_t* msg;
// get recently-sent packet from openqueue
msg = openqueue_sixtopGetSentPacket();
if (msg==NULL) {
openserial_printCritical(
COMPONENT_SIXTOP,
ERR_NO_SENT_PACKET,
(errorparameter_t)0,
(errorparameter_t)0
);
return;
}
// take ownership
msg->owner = COMPONENT_SIXTOP;
// update neighbor statistics
if (msg->l2_sendDoneError==E_SUCCESS) {
neighbors_indicateTx(
&(msg->l2_nextORpreviousHop),
msg->l2_numTxAttempts,
TRUE,
&msg->l2_asn
);
} else {
neighbors_indicateTx(
&(msg->l2_nextORpreviousHop),
msg->l2_numTxAttempts,
FALSE,
&msg->l2_asn
);
}
// send the packet to where it belongs
switch (msg->creator) {
case COMPONENT_SIXTOP:
if (msg->l2_frameType==IEEE154_TYPE_BEACON) {
// this is a ADV
// not busy sending ADV anymore
sixtop_vars.busySendingEB = FALSE;
} else {
// this is a KA
// not busy sending KA anymore
sixtop_vars.busySendingKA = FALSE;
}
// discard packets
openqueue_freePacketBuffer(msg);
// restart a random timer
sixtop_vars.periodMaintenance = 872+(openrandom_get16b()&0xff);
opentimers_setPeriod(
sixtop_vars.maintenanceTimerId,
TIME_MS,
sixtop_vars.periodMaintenance
);
break;
case COMPONENT_SIXTOP_RES:
sixtop_six2six_sendDone(msg,msg->l2_sendDoneError);
break;
default:
// send the rest up the stack
iphc_sendDone(msg,msg->l2_sendDoneError);
break;
}
}
