void ID_Init(void)
{
uint16 Init_ID=0x1234; //默认PANID，自己可以任意修改
uint16 preID; //这个是指向ZCD_NV_PANID的值
uint16 ID; //这个想ZCD_NV_PANID1的值
osal_nv_read(ZCD_NV_ID,0,2,&preID);
osal_nv_read(ZCD_NV_ID1,0,2,&ID);
//如果用串口调试助手修改了，则同时修改ZCD_NV_PANID和ZCD_NV_PANID1
//并且这两个值是相同的，所以当修改后则不会进入下面这个条件语句中
//而在修改之前通过下面的语句将默认PANIDID存入NV中，使得设备启动的
//时候有一个固定的PANID
if(preID!=ID)
{
if ( osal_nv_item_init( ZCD_NV_ID,
2,
&Init_ID ) == ZSUCCESS )
{
osal_nv_write(ZCD_NV_ID,0,2,&Init_ID);
osal_nv_read(ZCD_NV_ID,0,2,&Init_ID);
zgID=Init_ID;
}
}
}
/*********************************************************************
* @fn BindRestoreFromNV
*
* @brief Restore the binding table from NV
*
* @param none
*
* @return Number of entries restored
*/
uint16 BindRestoreFromNV( void )
{
nvBindingHdr_t hdr;
hdr.numRecs = 0;
#if !defined ( DONT_UPGRADE_BIND )
if ( BindUpgradeTableInNV() == ZSuccess )
#endif
{
if ( osal_nv_read( ZCD_NV_BINDING_TABLE, 0, sizeof(nvBindingHdr_t), &hdr ) == ZSuccess )
{
bindTableIndex_t x;
uint16 validRecsCount = 0;
// Read in the device list
for ( x = 0; ( x < gNWK_MAX_BINDING_ENTRIES ) && ( validRecsCount < hdr.numRecs ); x++ )
{
if ( osal_nv_read( ZCD_NV_BINDING_TABLE,
(uint16)(sizeof(nvBindingHdr_t) + (x * NV_BIND_REC_SIZE)),
NV_BIND_REC_SIZE, &BindingTable[x] ) == ZSUCCESS )
{
if ( BindingTable[x].srcEP != NV_BIND_EMPTY )
{
validRecsCount++;
}
}
}
}
}
return ( hdr.numRecs );
}
/****************************************************************************
* @fn ZDiagsRestoreStatsFromNV
*
* @brief Restores the statistics table from NV into the RAM table.
*
* @param none.
*
* @return ZSuccess - if NV data was restored from NV.
* ZFailure - Otherwise, NV_OPER_FAILED for failure.
*/
uint8 ZDiagsRestoreStatsFromNV( void )
{
uint8 retValue = ZFailure;
#if defined ( FEATURE_SYSTEM_STATS )
// restore diagnostics table from NV into RAM table
if ( osal_nv_read( ZCD_NV_DIAGNOSTIC_STATS, 0,
(uint16)sizeof( DiagStatistics_t ),
&DiagsStatsTable ) == SUCCESS )
{
// restore MAC values into the PIB
ZMacSetReq( ZMacDiagsRxCrcPass, (uint8 *)&(DiagsStatsTable.MacRxCrcPass) );
ZMacSetReq( ZMacDiagsRxCrcFail, (uint8 *)&(DiagsStatsTable.MacRxCrcFail) );
ZMacSetReq( ZMacDiagsRxBcast, (uint8 *)&(DiagsStatsTable.MacRxBcast) );
ZMacSetReq( ZMacDiagsTxBcast, (uint8 *)&(DiagsStatsTable.MacTxBcast) );
ZMacSetReq( ZMacDiagsRxUcast, (uint8 *)&(DiagsStatsTable.MacRxUcast) );
ZMacSetReq( ZMacDiagsTxUcast, (uint8 *)&(DiagsStatsTable.MacTxUcast) );
ZMacSetReq( ZMacDiagsTxUcastRetry, (uint8 *)&(DiagsStatsTable.MacTxUcastRetry) );
ZMacSetReq( ZMacDiagsTxUcastFail, (uint8 *)&(DiagsStatsTable.MacTxUcastFail) );
retValue = ZSuccess;
}
#endif // FEATURE_SYSTEM_STATS
return ( retValue );
}
/*********************************************************************
* @fn zclCCServer_ReadWriteCB
*
* @brief Read/write attribute data. This callback function should
* only be called for the Network Security Key attributes.
*
* Note: This function is only required when the attribute data
* format is unknown to ZCL. This function gets called
* when the pointer 'dataPtr' to the attribute value is
* NULL in the attribute database registered with the ZCL.
*
* @param clusterId - cluster that attribute belongs to
* @param attrId - attribute to be read or written
* @param oper - ZCL_OPER_LEN, ZCL_OPER_READ, or ZCL_OPER_WRITE
* @param pValue - pointer to attribute value
* @param pLen - length of attribute value read
*
* @return ZStatus_t
*/
static ZStatus_t zclCCServer_ReadWriteCB( uint16 clusterId, uint16 attrId,
uint8 oper, uint8 *pValue, uint16 *pLen )
{
ZStatus_t status = ZCL_STATUS_SUCCESS;
switch ( oper )
{
case ZCL_OPER_LEN:
*pLen = SEC_KEY_LEN;
break;
case ZCL_OPER_READ:
osal_nv_read( NvIdFromAttrId( attrId ), 0, SEC_KEY_LEN, pValue );
if ( pLen != NULL )
{
*pLen = SEC_KEY_LEN;
}
break;
case ZCL_OPER_WRITE:
osal_nv_write( NvIdFromAttrId( attrId ), 0, SEC_KEY_LEN, pValue );
break;
default:
status = ZCL_STATUS_SOFTWARE_FAILURE; // Should never get here!
break;
}
return ( status );
}
/*********************************************************************
* @fn zgWriteStartupOptions
*
* @brief Writes bits into the ZCD_NV_STARTUP_OPTION NV Item.
*
* @param action - ZG_STARTUP_SET set bit, ZG_STARTUP_CLEAR to
* clear bit. The set bit is an OR operation, and the
* clear bit is an AND ~(bitOptions) operation.
*
* @param bitOptions - which bits to perform action on:
* ZCD_STARTOPT_DEFAULT_CONFIG_STATE
* ZCD_STARTOPT_DEFAULT_NETWORK_STATE
*
* @return ZSUCCESS if successful
*/
uint8 zgWriteStartupOptions( uint8 action, uint8 bitOptions )
{
uint8 status;
uint8 startupOptions = 0;
status = osal_nv_read( ZCD_NV_STARTUP_OPTION,
0,
sizeof( startupOptions ),
&startupOptions );
if ( status == ZSUCCESS )
{
if ( action == ZG_STARTUP_SET )
{
// Set bits
startupOptions |= bitOptions;
}
else
{
// Clear bits
startupOptions &= (bitOptions ^ 0xFF);
}
// Changed?
status = osal_nv_write( ZCD_NV_STARTUP_OPTION,
0,
sizeof( startupOptions ),
&startupOptions );
}
return ( status );
}
/***************************************************************************************************
* @fn MT_UtilAPSME_LinkKeyDataGet
*
* @brief Retrieves APS Link Key data from NV.
*
* @param pBuf - pointer to the received buffer
*
* @return void
***************************************************************************************************/
static void MT_UtilAPSME_LinkKeyDataGet(uint8 *pBuf)
{
uint8 rsp[MT_APSME_LINKKEY_GET_RSP_LEN];
APSME_LinkKeyData_t *pData = NULL;
uint8 cmdId = pBuf[MT_RPC_POS_CMD1];
uint16 apsLinkKeyNvId;
uint32 *apsRxFrmCntr;
uint32 *apsTxFrmCntr;
pBuf += MT_RPC_FRAME_HDR_SZ;
*rsp = APSME_LinkKeyNVIdGet(pBuf, &apsLinkKeyNvId);
if (SUCCESS == *rsp)
{
pData = (APSME_LinkKeyData_t *)osal_mem_alloc(sizeof(APSME_LinkKeyData_t));
if (pData != NULL)
{
// retrieve key from NV
if ( osal_nv_read( apsLinkKeyNvId, 0,
sizeof(APSME_LinkKeyData_t), pData) == SUCCESS)
{
apsRxFrmCntr = &ApsLinkKeyFrmCntr[apsLinkKeyNvId - ZCD_NV_APS_LINK_KEY_DATA_START].rxFrmCntr;
apsTxFrmCntr = &ApsLinkKeyFrmCntr[apsLinkKeyNvId - ZCD_NV_APS_LINK_KEY_DATA_START].txFrmCntr;
uint8 *ptr = rsp+1;
(void)osal_memcpy(ptr, pData->key, SEC_KEY_LEN);
ptr += SEC_KEY_LEN;
*ptr++ = BREAK_UINT32(*apsTxFrmCntr, 0);
*ptr++ = BREAK_UINT32(*apsTxFrmCntr, 1);
*ptr++ = BREAK_UINT32(*apsTxFrmCntr, 2);
*ptr++ = BREAK_UINT32(*apsTxFrmCntr, 3);
*ptr++ = BREAK_UINT32(*apsRxFrmCntr, 0);
*ptr++ = BREAK_UINT32(*apsRxFrmCntr, 1);
*ptr++ = BREAK_UINT32(*apsRxFrmCntr, 2);
*ptr++ = BREAK_UINT32(*apsRxFrmCntr, 3);
}
// clear copy of key in RAM
osal_memset( pData, 0x00, sizeof(APSME_LinkKeyData_t) );
osal_mem_free(pData);
}
}
else
{
// set data key and counters 0xFF
osal_memset(&rsp[1], 0xFF, SEC_KEY_LEN + (MT_UTIL_FRM_CTR_LEN * 2));
}
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_UTIL), cmdId,
MT_APSME_LINKKEY_GET_RSP_LEN, rsp);
// clear key data
osal_memset(rsp, 0x00, MT_APSME_LINKKEY_GET_RSP_LEN);
}
/*********************************************************************
* @fn zgInit
*
* @brief
*
* Initialize the Z-Stack Globals. If an item doesn't exist in
* NV memory, write the system default into NV memory. But if
* it exists, set the item to the value stored in NV memory.
*
* NOTE: The Startup Options (ZCD_NV_STARTUP_OPTION) indicate
* that the Config state items (zgItemTable) need to be
* set to defaults (ZCD_STARTOPT_DEFAULT_CONFIG_STATE). The
*
* @param none
*
* @return ZSUCCESS if successful, NV_ITEM_UNINIT if item did not
* exist in NV, NV_OPER_FAILED if failure.
*/
uint8 zgInit( void )
{
uint8 setDefault = FALSE;
// Do we want to default the Config state values
if ( zgReadStartupOptions() & ZCD_STARTOPT_DEFAULT_CONFIG_STATE )
{
setDefault = TRUE;
}
#if defined ( FEATURE_SYSTEM_STATS )
// This sections tracks the number of resets
uint16 bootCnt = 0;
// Update the Boot Counter
if ( osal_nv_item_init( ZCD_NV_BOOTCOUNTER, sizeof(bootCnt), &bootCnt ) == ZSUCCESS )
{
// Get the old value from NV memory
osal_nv_read( ZCD_NV_BOOTCOUNTER, 0, sizeof(bootCnt), &bootCnt );
}
// Increment the Boot Counter and store it into NV memory
if ( setDefault )
{
bootCnt = 0;
}
else
{
bootCnt++;
}
osal_nv_write( ZCD_NV_BOOTCOUNTER, 0, sizeof(bootCnt), &bootCnt );
#endif // FEATURE_SYSTEM_STATS
// Initialize the Extended PAN ID as my own extended address
ZMacGetReq( ZMacExtAddr, zgExtendedPANID );
// Initialize the items table
zgInitItems( setDefault );
#ifndef NONWK
if ( ZG_SECURE_ENABLED )
{
// Initialize the Pre-Configured Key to the default key
zgPreconfigKeyInit( setDefault );
// Initialize NV items for all Keys: NWK, APS, TCLK and Master
ZDSecMgrInitNVKeyTables( setDefault );
}
#endif // NONWK
// Clear the Config State default
if ( setDefault )
{
zgWriteStartupOptions( ZG_STARTUP_CLEAR, ZCD_STARTOPT_DEFAULT_CONFIG_STATE );
}
return ( ZSUCCESS );
}
/*********************************************************************
* @fn zgInit
*
* @brief
*
* Initialize the Z-Stack Globals. If an item doesn't exist in
* NV memory, write the system default into NV memory. But if
* it exists, set the item to the value stored in NV memory.
*
* NOTE: The Startup Options (ZCD_NV_STARTUP_OPTION) indicate
* that the Config state items (zgItemTable) need to be
* set to defaults (ZCD_STARTOPT_DEFAULT_CONFIG_STATE). The
*
*
* @param none
*
* @return ZSUCCESS if successful, NV_ITEM_UNINIT if item did not
* exist in NV, NV_OPER_FAILED if failure.
*/
uint8 zgInit( void )
{
uint8 i = 0;
uint8 setDefault = FALSE;
// Do we want to default the Config state values
if ( zgReadStartupOptions() & ZCD_STARTOPT_DEFAULT_CONFIG_STATE )
{
setDefault = TRUE;
}
#if 0
// Enable this section if you need to track the number of resets
// This section is normally disabled to minimize "wear" on NV memory
uint16 bootCnt = 0;
// Update the Boot Counter
if ( osal_nv_item_init( ZCD_NV_BOOTCOUNTER, sizeof(bootCnt), &bootCnt ) == ZSUCCESS )
{
// Get the old value from NV memory
osal_nv_read( ZCD_NV_BOOTCOUNTER, 0, sizeof(bootCnt), &bootCnt );
}
// Increment the Boot Counter and store it into NV memory
if ( setDefault )
bootCnt = 0;
else
bootCnt++;
osal_nv_write( ZCD_NV_BOOTCOUNTER, 0, sizeof(bootCnt), &bootCnt );
#endif
// Initialize the Extended PAN ID as my own extended address
ZMacGetReq( ZMacExtAddr, zgExtendedPANID );
#ifndef NONWK
// Initialize the Pre-Configured Key to the default key
osal_memcpy( zgPreConfigKey, defaultKey, SEC_KEY_LEN ); // Do NOT Change!!!
#endif // NONWK
while ( zgItemTable[i].id != 0x00 )
{
// Initialize the item
zgItemInit( zgItemTable[i].id, zgItemTable[i].len, zgItemTable[i].buf, setDefault );
// Move on to the next item
i++;
}
// Clear the Config State default
if ( setDefault )
{
zgWriteStartupOptions( ZG_STARTUP_CLEAR, ZCD_STARTOPT_DEFAULT_CONFIG_STATE );
}
return ( ZSUCCESS );
}
/**************************************************************************************************
* @fn znpTestRF
*
* @brief This function initializes and checks the ZNP RF Test Mode NV items. It is designed
* to be invoked before/instead of MAC radio initialization.
*
* input parameters
*
* None.
*
* output parameters
*
* None.
*
* @return None.
*/
void znpTestRF(void)
{
uint8 rfTestParms[4] = { 0, 0, 0, 0 };
if ((SUCCESS != osal_nv_item_init(ZNP_NV_RF_TEST_PARMS, 4, rfTestParms)) ||
(SUCCESS != osal_nv_read(ZNP_NV_RF_TEST_PARMS, 0, 4, rfTestParms)) ||
(rfTestParms[0] == 0))
{
return;
}
// Settings from SmartRF Studio
MDMCTRL0 = 0x85;
RXCTRL = 0x3F;
FSCTRL = 0x5A;
FSCAL1 = 0x2B;
AGCCTRL1 = 0x11;
ADCTEST0 = 0x10;
ADCTEST1 = 0x0E;
ADCTEST2 = 0x03;
FRMCTRL0 = 0x43;
FRMCTRL1 = 0x00;
MAC_RADIO_RXTX_OFF();
MAC_RADIO_SET_CHANNEL(rfTestParms[1]);
MAC_RADIO_SET_TX_POWER(rfTestParms[2]);
TX_PWR_TONE_SET(rfTestParms[3]);
switch (rfTestParms[0])
{
case 1: // Rx promiscuous mode.
MAC_RADIO_RX_ON();
break;
case 2: // Un-modulated Tx.
TX_PWR_MOD__SET(1);
// no break;
case 3: // Modulated Tx.
// Modulated is default register setting, so no special action.
// Now turn on Tx power for either mod or un-modulated Tx test.
MAC_RADIO_TX_ON();
break;
default: // Not expected.
break;
}
// Clear the RF test mode.
(void)osal_memset(rfTestParms, 0, 4);
(void)osal_nv_write(ZNP_NV_RF_TEST_PARMS, 0, 4, rfTestParms);
while (1); // Spin in RF test mode until a hard reset.
}
/*********************************************************************
* @fn BindRestoreFromNV
*
* @brief Restore the binding table from NV
*
* @param none
*
* @return Number of entries restored
*/
uint16 BindRestoreFromNV( void )
{
nvBindingHdr_t hdr;
uint16 numAdded = 0;
if ( osal_nv_read( ZCD_NV_BINDING_TABLE, 0, sizeof(nvBindingHdr_t), &hdr ) == ZSuccess )
{
if (hdr.numRecs > 0)
{
// Read the whole table at once
if ( osal_nv_read( ZCD_NV_BINDING_TABLE,
(uint16)(sizeof(nvBindingHdr_t)),
(NV_BIND_REC_SIZE * gNWK_MAX_BINDING_ENTRIES), BindingTable ) == ZSUCCESS )
{
numAdded = gNWK_MAX_BINDING_ENTRIES;
}
}
}
return ( numAdded );
}
/*********************************************************************
* @fn zclCCServer_UseStartupParameters
*
* @brief Set the network parameters to the current Startup Parameters.
*
* @param none
*
* @return none
*/
static void zclCCServer_UseStartupParameters( void )
{
if ( zclCCServer_StartUpControl == CC_STARTUP_CONTROL_OPTION_1 )
{
uint8 networkKey[SEC_KEY_LEN];
// Form the Commissioning network and become the Coordinator for that network
// Required attributes: Extended PAN ID
osal_nv_write( ZCD_NV_EXTENDED_PAN_ID, 0, Z_EXTADDR_LEN,
zclCCServer_ExtendedPanId );
osal_nv_write( ZCD_NV_APS_USE_EXT_PANID, 0, Z_EXTADDR_LEN,
zclCCServer_ExtendedPanId );
// Optional attributes: PAN ID, Channel Mask, Network Manager Address,
// Network Key, Network Key Type (only KEY_TYPE_NWK is currently supported),
// and Trust Center Address (which is used with Preconfigured Link Key).
osal_nv_write( ZCD_NV_PANID, 0, sizeof( zclCCServer_PanId ),
&zclCCServer_PanId );
osal_nv_write( ZCD_NV_CHANLIST, 0, sizeof( zclCCServer_ChannelMask ),
&zclCCServer_ChannelMask );
osal_nv_write( ZCD_NV_NWKMGR_ADDR, 0, sizeof( zclCCServer_NwkManagerAddr ),
&zclCCServer_NwkManagerAddr );
osal_nv_read( ZCD_NV_SAS_CURR_NWK_KEY, 0, SEC_KEY_LEN, networkKey );
if ( !nullKey( networkKey ) )
{
// Save the Network Key as the Pre-Configured Key in NV
osal_nv_write( ZCD_NV_PRECFGKEY, 0, SEC_KEY_LEN, networkKey );
// Clear copy of key in RAM
osal_memset( networkKey, 0x00, SEC_KEY_LEN );
}
}
else if ( zclCCServer_StartUpControl == CC_STARTUP_CONTROL_OPTION_3 )
{
// Join the Commissioning network
// Required attributes: none
// Optional attributes: Extended PAN ID, Channel Mask, and
// Preconfigured Link Key
osal_nv_write( ZCD_NV_EXTENDED_PAN_ID, 0, Z_EXTADDR_LEN,
zclCCServer_ExtendedPanId );
osal_nv_write( ZCD_NV_CHANLIST, 0, sizeof( zclCCServer_ChannelMask ),
&zclCCServer_ChannelMask );
zclCCServer_SavePreconfigLinkKey();
}
}
void deviceManagerInit(void){
ZDO_DeviceAnnce_t * iter, *end;
end = table +TABLE_SIZE;
for(iter = table; iter != end; iter++){
iter->nwkAddr=INVALID;
}
osal_nv_item_init(NV_ID, sizeof(ZDO_DeviceAnnce_t)*TABLE_SIZE, table);
uint16 size = osal_nv_item_len(NV_ID);
if (size > TABLE_SIZE*sizeof(ZDO_DeviceAnnce_t)){
size = TABLE_SIZE*sizeof(ZDO_DeviceAnnce_t);
}
osal_nv_read(NV_ID, 0, size, table);
}
void Setid(void)
{
uint16 gu16RecBuffLen;
if ( osal_nv_item_init( ZCD_NV_ID,
2,
&gu16RecBuffLen ) == ZSUCCESS )
{
osal_nv_read(ZCD_NV_ID,0,2,&gu16RecBuffLen);
}
zgID=gu16RecBuffLen;
}
/*********************************************************************
* @fn zclCCServer_RestoreStartupParametersInNV
*
* @brief Restore the Startup Parameters from NV
*
* @param none
*
* @return none
*/
static void zclCCServer_RestoreStartupParametersInNV( void )
{
uint8 key[SEC_KEY_LEN];
for ( uint8 i = 0; nvItemTable[i].id != 0x00; i++ )
{
// Read the item
osal_nv_read( nvItemTable[i].id, 0, nvItemTable[i].len, nvItemTable[i].buf );
}
// Update the current keys in the NV
osal_nv_read( ZCD_NV_SAS_TC_MASTER_KEY, 0, SEC_KEY_LEN, key );
osal_nv_write( ZCD_NV_SAS_CURR_TC_MASTER_KEY, 0, SEC_KEY_LEN, key );
osal_nv_read( ZCD_NV_SAS_NWK_KEY, 0, SEC_KEY_LEN, key );
osal_nv_write( ZCD_NV_SAS_CURR_NWK_KEY, 0, SEC_KEY_LEN, key );
osal_nv_read( ZCD_NV_SAS_PRECFG_LINK_KEY, 0, SEC_KEY_LEN, key );
osal_nv_write( ZCD_NV_SAS_CURR_PRECFG_LINK_KEY, 0, SEC_KEY_LEN, key );
// Clear copy of key in RAM
osal_memset( key, 0x00, SEC_KEY_LEN );
}
/******************************************************************************
* @fn zb_ReadConfiguration
*
* @brief The zb_ReadConfiguration function is used to get a
* Configuration Protperty from Nonvolatile memory.
*
* @param configId - The identifier for the configuration property
* len - The size of the pValue buffer in bytes
* pValue - A buffer to hold the configuration property
*
* @return none
*/
uint8 zb_ReadConfiguration( uint8 configId, uint8 len, void *pValue )
{
uint8 size;
size = (uint8)osal_nv_item_len( configId );
if ( size > len )
{
return ZFailure;
}
else
{
return( osal_nv_read(configId, 0, size, pValue) );
}
}
/*********************************************************************
* @fn zclCCServer_InitStartupParametersInNV
*
* @brief Initialize the Startup Parameters in NV.
*
* @param none
*
* @return none
*/
static void zclCCServer_InitStartupParametersInNV( void )
{
uint8 key[SEC_KEY_LEN];
for ( uint8 i = 0; nvItemTable[i].id != 0x00; i++ )
{
// Initialize the item
osal_nv_item_init( nvItemTable[i].id, nvItemTable[i].len, nvItemTable[i].buf );
}
// Use the default key values in the NV
osal_nv_read( ZCD_NV_SAS_CURR_TC_MASTER_KEY, 0, SEC_KEY_LEN, key );
osal_nv_item_init( ZCD_NV_SAS_TC_MASTER_KEY, SEC_KEY_LEN, key );
osal_nv_read( ZCD_NV_SAS_CURR_NWK_KEY, 0, SEC_KEY_LEN, key );
osal_nv_item_init( ZCD_NV_SAS_NWK_KEY, SEC_KEY_LEN, key );
osal_nv_read( ZCD_NV_SAS_CURR_PRECFG_LINK_KEY, 0, SEC_KEY_LEN, key );
osal_nv_item_init( ZCD_NV_SAS_PRECFG_LINK_KEY, SEC_KEY_LEN, key );
// Clear copy of key in RAM
osal_memset( key, 0x00, SEC_KEY_LEN );
}
uint8 cb_ReadConfiguration( uint8 configId, uint8 len, void *pValue ) // it's just check the configId if existed,wont create one,unlikely osal_nv_item_init
{
uint8 size;
size = (uint8)osal_nv_item_len( configId );
if ( size > len )
{
return ZFailure;
}
else
{
return( osal_nv_read(configId, 0, size, pValue) );
}
}
/*********************************************************************
* @fn zgReadStartupOptions
*
* @brief Reads the ZCD_NV_STARTUP_OPTION NV Item.
*
* @param none
*
* @return the ZCD_NV_STARTUP_OPTION NV item
*/
uint8 zgReadStartupOptions( void )
{
// Default to Use Config State and Use Network State
uint8 startupOption = 0;
// This should have been done in ZMain.c, but just in case.
if ( osal_nv_item_init( ZCD_NV_STARTUP_OPTION,
sizeof(startupOption),
&startupOption ) == ZSUCCESS )
{
// Read saved startup control
osal_nv_read( ZCD_NV_STARTUP_OPTION,
0,
sizeof( startupOption ),
&startupOption);
}
return ( startupOption );
}
/*********************************************************************
* @fn zclCCServer_SavePreconfigLinkKey
*
* @brief Save the Pre-Configured Link Key.
*
* @param void
*
* @return ZStatus_t
*/
static void zclCCServer_SavePreconfigLinkKey( void )
{
APSME_TCLinkKey_t *pKeyData;
pKeyData = (APSME_TCLinkKey_t *)osal_mem_alloc( sizeof( APSME_TCLinkKey_t ) );
if (pKeyData != NULL)
{
// Making sure data is cleared for every key all the time
osal_memset( pKeyData, 0x00, sizeof( APSME_TCLinkKey_t ) );
osal_memset( pKeyData->extAddr, 0xFF, Z_EXTADDR_LEN );
osal_nv_read( ZCD_NV_SAS_CURR_PRECFG_LINK_KEY, 0, SEC_KEY_LEN, pKeyData->key );
// Save the Pre-Configured Link Key as the default TC Link Key the in NV
osal_nv_write( ZCD_NV_TCLK_TABLE_START, 0, sizeof( APSME_TCLinkKey_t ), pKeyData );
// Clear copy of key in RAM
osal_memset( pKeyData, 0x00, sizeof( APSME_TCLinkKey_t ) );
osal_mem_free( pKeyData );
}
}
/*********************************************************************
* @fn zgItemInit()
*
* @brief
*
* Initialize a global item. If the item doesn't exist in NV memory,
* write the system default (value passed in) into NV memory. But if
* it exists, set the item to the value stored in NV memory.
*
* Also, if setDefault is TRUE and the item exists, we will write
* the default value to NV space.
*
* @param id - item id
* @param len - item len
* @param buf - pointer to the item
* @param setDefault - TRUE to set default, not read
*
* @return ZSUCCESS if successful, NV_ITEM_UNINIT if item did not
* exist in NV, NV_OPER_FAILED if failure.
*/
static uint8 zgItemInit( uint16 id, uint16 len, void *buf, uint8 setDefault )
{
uint8 status;
// If the item doesn't exist in NV memory, create and initialize
// it with the value passed in.
status = osal_nv_item_init( id, len, buf );
if ( status == ZSUCCESS )
{
if ( setDefault )
{
// Write the default value back to NV
status = osal_nv_write( id, 0, len, buf );
}
else
{
// The item exists in NV memory, read it from NV memory
status = osal_nv_read( id, 0, len, buf );
}
}
return (status);
}
/*********************************************************************
* @fn BindUpgradeTableInNV
*
* @brief Verifies if the existing table in NV has different size
* than the table defined by parameters in the current code.
* If different, creates a backup table, deletes the existing
* table and creates the new table with the new size. After
* this process is done ZCD_NV_BINDING_TABLE NV item contains
* only valid records retrieved from the original table, up to
* the maximum number of records defined by gNWK_MAX_BINDING_ENTRIES
*
* @param none
*
* @return ZSuccess - the Update process was sucessful.
* ZFailure - otherwise.
*/
static uint8 BindUpgradeTableInNV( void )
{
uint8 status = ZSuccess;
nvBindingHdr_t hdr;
uint16 dupLen;
uint16 bindLen;
uint16 newLen;
bool duplicateReady = FALSE;
// Size of the Binding table based on current paramenters in the code
newLen = sizeof(nvBindingHdr_t) + NV_BIND_ITEM_SIZE;
// Size of the Binding table NV item, this is the whole size of the item,
// it could inculde invalid records also
bindLen = osal_nv_item_len( ZCD_NV_BINDING_TABLE );
// Get the number of valid records from the Binding table
osal_nv_read( ZCD_NV_BINDING_TABLE, 0, sizeof(nvBindingHdr_t), &hdr );
// Identify if there is a duplicate NV item, if it is there, that means an
// Upgrade process did not finish properly last time
// The length function will return 0 if the Backup NV ID does not exist.
dupLen = osal_nv_item_len( ZCD_NV_DUPLICATE_BINDING_TABLE );
// A duplicate of the original Binding item will be done if:
// 1) A duplicate NV item DOES NOT exist AND the size of the original Binding
// item in NV is different (larger/smaller) than the the length calculated
// from the parameters in the code. If they are the same there is no need
// to do the Upgrade process.
// 2) A duplicate NV item exists (probably because the previous upgrade
// process was interrupted) and [the original Binding NV items exists AND
// has valid recods (it is important to make sure that valid records exist
// in the binding table because it is possible that the item was created
// but the data was not copied in the previous upgrade process).
if ( ( ( dupLen == 0 ) && ( bindLen != newLen ) ) ||
( ( dupLen > 0 ) && ( bindLen > 0 ) && ( hdr.numRecs > 0 ) ) )
{
// Create a copy from original NV item into a duplicate NV item
if ( ( status = nwkCreateDuplicateNV( ZCD_NV_BINDING_TABLE,
ZCD_NV_DUPLICATE_BINDING_TABLE ) ) == ZSuccess )
{
// Delete the original NV item once the duplicate is ready
if ( osal_nv_delete( ZCD_NV_BINDING_TABLE, bindLen ) != ZSuccess )
{
status = ZFailure;
}
else
{
duplicateReady = TRUE;
}
}
}
else if ( ( ( dupLen > 0 ) && ( bindLen == 0 ) ) ||
( ( dupLen > 0 ) && ( bindLen > 0 ) && ( hdr.numRecs == 0 ) ) )
{
// If for some reason a duplicate NV item was left in the system from a
// previous upgrade process and:
// 1) The original Binding NV item DOES NOT exist OR
// 2) The original Binding NV item exist, but has no valid records.
// it is necessary to rely in the data in the Duplicate item to create
// the Binding table
bindLen = dupLen;
duplicateReady = TRUE;
}
if ( duplicateReady == TRUE )
{
// Creates the New Binding table, Copy data from backup and Delete backup NV ID
status = BindCopyBackupToNewNV( bindLen, newLen );
}
return ( status );
}
/*********************************************************************
* @fn NIB_init()
*
* @brief
*
* Initialize attribute values in NIB
*
* @param none
*
* @return none
*/
void NIB_init()
{
_NIB.SequenceNum = LO_UINT16(osal_rand());
_NIB.nwkProtocolVersion = ZB_PROT_VERS;
_NIB.MaxDepth = MAX_NODE_DEPTH;
#if ( NWK_MODE == NWK_MODE_MESH )
_NIB.beaconOrder = BEACON_ORDER_NO_BEACONS;
_NIB.superFrameOrder = BEACON_ORDER_NO_BEACONS;
#endif
// BROADCAST SETTINGS:
// *******************
// Broadcast Delivery Time
// - set to multiples of 100ms
// - should be 500ms more than the retry time
// - "retry time" = PassiveAckTimeout * (MaxBroadcastRetries + 1)
// Passive Ack Timeout
// - set to multiples of 100ms
_NIB.BroadcastDeliveryTime = zgBcastDeliveryTime;
_NIB.PassiveAckTimeout = zgPassiveAckTimeout;
_NIB.MaxBroadcastRetries = zgMaxBcastRetires;
_NIB.ReportConstantCost = 0;
_NIB.RouteDiscRetries = 0;
_NIB.SecureAllFrames = USE_NWK_SECURITY;
_NIB.nwkAllFresh = NWK_ALL_FRESH;
if ( ZG_SECURE_ENABLED )
{
_NIB.SecurityLevel = SECURITY_LEVEL;
}
else
{
_NIB.SecurityLevel = 0;
}
#if defined ( ZIGBEEPRO )
_NIB.SymLink = FALSE;
#else
_NIB.SymLink = TRUE;
#endif
_NIB.CapabilityFlags = ZDO_Config_Node_Descriptor.CapabilityFlags;
_NIB.TransactionPersistenceTime = zgIndirectMsgTimeout;
_NIB.RouteDiscoveryTime = zgRouteDiscoveryTime;
_NIB.RouteExpiryTime = zgRouteExpiryTime;
_NIB.nwkDevAddress = INVALID_NODE_ADDR;
_NIB.nwkLogicalChannel = 0;
_NIB.nwkCoordAddress = INVALID_NODE_ADDR;
osal_memset( _NIB.nwkCoordExtAddress, 0, Z_EXTADDR_LEN );
_NIB.nwkPanId = INVALID_NODE_ADDR;
osal_cpyExtAddr( _NIB.extendedPANID, zgExtendedPANID );
_NIB.nwkKeyLoaded = FALSE;
#if defined ( ZIGBEE_STOCHASTIC_ADDRESSING )
_NIB.nwkAddrAlloc = NWK_ADDRESSING_STOCHASTIC;
_NIB.nwkUniqueAddr = FALSE;
#else
_NIB.nwkAddrAlloc = NWK_ADDRESSING_DISTRIBUTED;
_NIB.nwkUniqueAddr = TRUE;
#endif
_NIB.nwkLinkStatusPeriod = NWK_LINK_STATUS_PERIOD;
_NIB.nwkRouterAgeLimit = NWK_ROUTE_AGE_LIMIT;
//MTO and source routing
_NIB.nwkConcentratorDiscoveryTime = zgConcentratorDiscoveryTime;
_NIB.nwkIsConcentrator = zgConcentratorEnable;
_NIB.nwkConcentratorRadius = zgConcentratorRadius;
#if defined ( ZIGBEE_MULTICAST )
_NIB.nwkUseMultiCast = TRUE;
#else
_NIB.nwkUseMultiCast = FALSE;
#endif
#if defined ( NV_RESTORE )
if ( osal_nv_read( ZCD_NV_NWKMGR_ADDR, 0, sizeof( _NIB.nwkManagerAddr ),
&_NIB.nwkManagerAddr ) != SUCCESS )
#endif
{
_NIB.nwkManagerAddr = 0x0000;
}
_NIB.nwkUpdateId = 0;
_NIB.nwkTotalTransmissions = 0;
if ( ZSTACK_ROUTER_BUILD )
{
#if defined ( ZIGBEE_STOCHASTIC_ADDRESSING )
NLME_InitStochasticAddressing();
#else
NLME_InitTreeAddressing();
#endif
}
}
/***************************************************************************************************
* @fn MT_SysOsalNVRead
*
* @brief Read a NV value
*
* @param uint8 pBuf - pointer to the data
*
* @return None
***************************************************************************************************/
void MT_SysOsalNVRead(uint8 *pBuf)
{
uint16 nvId;
uint8 nvItemLen=0, nvItemOffset=0;
uint8 *pRetBuf=NULL;
uint8 respLen;
/* Skip over RPC header */
pBuf += MT_RPC_FRAME_HDR_SZ;
/* Get the ID */
nvId = BUILD_UINT16(pBuf[0], pBuf[1]);
/* Get the offset */
nvItemOffset = pBuf[2];
#if !MT_SYS_OSAL_NV_READ_CERTIFICATE_DATA
if ((ZCD_NV_IMPLICIT_CERTIFICATE == nvId) ||
(ZCD_NV_CA_PUBLIC_KEY == nvId) ||
(ZCD_NV_DEVICE_PRIVATE_KEY == nvId))
{
uint8 tmp[2] = { INVALIDPARAMETER, 0 };
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_SYS),
MT_SYS_OSAL_NV_READ, 2, tmp);
return;
}
#endif
#if !MT_SYS_KEY_MANAGEMENT
if ( (nvId == ZCD_NV_NWK_ACTIVE_KEY_INFO) ||
(nvId == ZCD_NV_NWK_ALTERN_KEY_INFO) ||
((nvId >= ZCD_NV_TCLK_TABLE_START) && (nvId <= ZCD_NV_TCLK_TABLE_END)) ||
((nvId >= ZCD_NV_APS_LINK_KEY_DATA_START) && (nvId <= ZCD_NV_APS_LINK_KEY_DATA_END)) ||
((nvId >= ZCD_NV_MASTER_KEY_DATA_START) && (nvId <= ZCD_NV_MASTER_KEY_DATA_END)) ||
(nvId == ZCD_NV_PRECFGKEY) )
{
uint8 tmp1[2] = { INVALIDPARAMETER, 0 };
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_SYS),
MT_SYS_OSAL_NV_READ, 2, tmp1);
return;
}
#endif //!MT_SYS_KEY_MANAGEMENT
nvItemLen = osal_nv_item_len(nvId);
/* Return only 250 bytes max */
if (nvItemLen > MT_NV_ITEM_MAX_LENGTH)
{
nvItemLen = MT_NV_ITEM_MAX_LENGTH;
}
if ((nvItemLen > 0) && ((nvItemLen - nvItemOffset) > 0))
{
respLen = nvItemLen - nvItemOffset + 2;
}
else
{
respLen = 2;
}
pRetBuf = osal_mem_alloc(respLen);
if (pRetBuf != NULL)
{
osal_memset(pRetBuf, 0, respLen);
/* Default to ZFailure */
pRetBuf[0] = ZFailure;
if (respLen > 2)
{
if (((osal_nv_read( nvId, (uint16)nvItemOffset, (uint16)nvItemLen, &pRetBuf[2])) == ZSUCCESS) && (respLen > 2))
{
pRetBuf[0] = ZSuccess;
}
pRetBuf[1] = nvItemLen - nvItemOffset;
}
else
{
pRetBuf[1] = 0;
}
/* Build and send back the response */
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_SYS),
MT_SYS_OSAL_NV_READ, respLen, pRetBuf );
osal_mem_free(pRetBuf);
}
}
/**************************************************************************************************
* @fn MT_ZnpBasicRsp
*
* @brief Build and send the ZNP Basic Response to the ZAP.
*
* input parameters
*
* None.
*
* output parameters
*
* None.
*
* @return true if message built and sent; false otherwise.
*/
bool MT_ZnpBasicRsp(void)
{
uint8 *pBuf = osal_mem_alloc(sizeof(mt_znp_basic_rsp_t));
if (pBuf == NULL)
{
return false;
}
osal_buffer_uint32( &pBuf[0], MT_PeriodicMsgRate );
osal_buffer_uint32( &pBuf[4], zgDefaultChannelList );
pBuf[8] = LO_UINT16(zgConfigPANID);
pBuf[9] = HI_UINT16(zgConfigPANID);
osal_nv_read(ZCD_NV_STARTUP_OPTION, 0, 1, pBuf+10);
pBuf[11] = zgDeviceLogicalType;
pBuf[12] = LO_UINT16(_NIB.nwkDevAddress);
pBuf[13] = HI_UINT16(_NIB.nwkDevAddress);
pBuf[14] = LO_UINT16(_NIB.nwkCoordAddress);
pBuf[15] = HI_UINT16(_NIB.nwkCoordAddress);
pBuf[16] = LO_UINT16(_NIB.nwkPanId);
pBuf[17] = HI_UINT16(_NIB.nwkPanId);
pBuf[18] = _NIB.nwkLogicalChannel;
pBuf[19] = _NIB.nwkState;
(void)osal_memcpy(pBuf+20, _NIB.nwkCoordExtAddress, Z_EXTADDR_LEN);
(void)osal_memcpy(pBuf+28, aExtendedAddress, Z_EXTADDR_LEN);
pBuf[36] = devState;
#if defined INTER_PAN
extern uint8 appEndPoint;
pBuf[37] = appEndPoint;
//rsp->spare1[2];
#else
//rsp->spare1[3];
#endif
// Initialize list with invalid EndPoints.
(void)osal_memset(pBuf+40, AF_BROADCAST_ENDPOINT, (MT_ZNP_EP_ID_LIST_MAX * 3));
uint8 idx = 40;
epList_t *epItem = epList;
for (uint8 cnt = 0; cnt < MT_ZNP_EP_ID_LIST_MAX; cnt++)
{
if (epItem == NULL)
{
break;
}
if ((epItem->epDesc->simpleDesc != NULL) && (epItem->epDesc->simpleDesc->EndPoint != ZDO_EP))
{
pBuf[idx++] = epItem->epDesc->simpleDesc->EndPoint;
pBuf[idx++] = LO_UINT16(epItem->epDesc->simpleDesc->AppProfId);
pBuf[idx++] = HI_UINT16(epItem->epDesc->simpleDesc->AppProfId);
}
epItem = epItem->nextDesc;
}
idx = 40 + (MT_ZNP_EP_ID_LIST_MAX * 3);
// Initialize list with invalid Cluster Id's.
(void)osal_memset(pBuf+idx, 0xFF, (MT_ZNP_ZDO_MSG_CB_LIST_MAX * 2));
typedef struct
{
void *next;
uint8 taskID;
uint16 clusterID;
} ZDO_MsgCB_t;
extern ZDO_MsgCB_t *zdoMsgCBs;
ZDO_MsgCB_t *pItem = zdoMsgCBs;
for (uint8 cnt = 0; cnt < MT_ZNP_ZDO_MSG_CB_LIST_MAX; cnt++)
{
if (pItem == NULL)
{
break;
}
else if (pItem->taskID == MT_TaskID)
{
pBuf[idx++] = LO_UINT16(pItem->clusterID);
pBuf[idx++] = HI_UINT16(pItem->clusterID);
}
pItem = pItem->next;
}
idx = 40 + (MT_ZNP_EP_ID_LIST_MAX * 3) + (MT_ZNP_ZDO_MSG_CB_LIST_MAX * 2);
extern pfnZdoCb zdoCBFunc[MAX_ZDO_CB_FUNC];
for (uint8 cnt = 0; cnt < MAX_ZDO_CB_FUNC; cnt++)
{
pBuf[idx++] = (zdoCBFunc[cnt] == NULL) ? 0 : 1;
}
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_AREQ | (uint8)MT_RPC_SYS_ZNP), MT_ZNP_BASIC_RSP,
40 + (MT_ZNP_EP_ID_LIST_MAX * 3) + (MT_ZNP_ZDO_MSG_CB_LIST_MAX * 2) + MAX_ZDO_CB_FUNC, pBuf);
(void)osal_mem_free(pBuf);
return true;
}
/***************************************************************************************************
* @fn MT_UtilGetNvInfo
*
* @brief The Get NV Info serial message.
*
* @param None.
*
* @return void
***************************************************************************************************/
void MT_UtilGetNvInfo(void)
{
uint8 len;
uint8 stat;
uint8 *buf;
uint8 *pBuf;
uint16 tmp16;
uint32 tmp32;
/*
Get required length of buffer
Status + ExtAddr + ChanList + PanID + SecLevel + PreCfgKey
*/
len = 1 + Z_EXTADDR_LEN + 4 + 2 + 1 + SEC_KEY_LEN;
buf = osal_mem_alloc( len );
if ( buf )
{
/* Assume NV not available */
osal_memset( buf, 0xFF, len );
/* Skip over status */
pBuf = buf + 1;
/* Start with 64-bit extended address */
stat = osal_nv_read( ZCD_NV_EXTADDR, 0, Z_EXTADDR_LEN, pBuf );
if ( stat ) stat = 0x01;
pBuf += Z_EXTADDR_LEN;
/* Scan channel list (bit mask) */
if ( osal_nv_read( ZCD_NV_CHANLIST, 0, sizeof( tmp32 ), &tmp32 ) )
stat |= 0x02;
else
{
pBuf[0] = BREAK_UINT32( tmp32, 3 );
pBuf[1] = BREAK_UINT32( tmp32, 2 );
pBuf[2] = BREAK_UINT32( tmp32, 1 );
pBuf[3] = BREAK_UINT32( tmp32, 0 );
}
pBuf += sizeof( tmp32 );
/* ZigBee PanID */
if ( osal_nv_read( ZCD_NV_PANID, 0, sizeof( tmp16 ), &tmp16 ) )
stat |= 0x04;
else
{
pBuf[0] = LO_UINT16( tmp16 );
pBuf[1] = HI_UINT16( tmp16 );
}
pBuf += sizeof( tmp16 );
/* Security level */
if ( osal_nv_read( ZCD_NV_SECURITY_LEVEL, 0, sizeof( uint8 ), pBuf++ ) )
stat |= 0x08;
/* Pre-configured security key */
if ( osal_nv_read( ZCD_NV_PRECFGKEY, 0, SEC_KEY_LEN, pBuf ) )
stat |= 0x10;
/* Status bit mask - bit=1 indicates failure */
*buf = stat;
MT_BuildAndSendZToolResponse(((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_UTIL), MT_UTIL_GET_NV_INFO,
len, buf );
osal_mem_free( buf );
}
}
/***************************************************************************************************
* @fn MT_UtilGetDeviceInfo
*
* @brief The Get Device Info serial message.
*
* @param None.
*
* @return void
***************************************************************************************************/
void MT_UtilGetDeviceInfo(void)
{
uint8 *buf;
uint8 *pBuf;
uint8 bufLen = MT_UTIL_DEVICE_INFO_RESPONSE_LEN;
uint16 *assocList = NULL;
#if !defined NONWK
uint8 assocCnt = 0;
if (ZG_DEVICE_RTR_TYPE)
{
assocList = AssocMakeList( &assocCnt );
bufLen += (assocCnt * sizeof(uint16));
}
#endif
buf = osal_mem_alloc( bufLen );
if ( buf )
{
pBuf = buf;
*pBuf++ = ZSUCCESS; // Status
osal_nv_read( ZCD_NV_EXTADDR, 0, Z_EXTADDR_LEN, pBuf );
pBuf += Z_EXTADDR_LEN;
#if defined NONWK
// Skip past ZStack only parameters for NONWK
*pBuf++ = 0;
*pBuf++ = 0;
*pBuf++ = 0;
*pBuf++ = 0;
*pBuf = 0;
#else
{
uint16 shortAddr = NLME_GetShortAddr();
*pBuf++ = LO_UINT16( shortAddr );
*pBuf++ = HI_UINT16( shortAddr );
}
/* Return device type */
*pBuf++ = ZSTACK_DEVICE_BUILD;
/*Return device state */
*pBuf++ = (uint8)devState;
if (ZG_DEVICE_RTR_TYPE)
{
*pBuf++ = assocCnt;
if ( assocCnt )
{
uint8 x;
uint16 *puint16 = assocList;
for ( x = 0; x < assocCnt; x++, puint16++ )
{
*pBuf++ = LO_UINT16( *puint16 );
*pBuf++ = HI_UINT16( *puint16 );
}
}
}
else
{
*pBuf++ = 0;
}
#endif
MT_BuildAndSendZToolResponse( ((uint8)MT_RPC_CMD_SRSP | (uint8)MT_RPC_SYS_UTIL),
MT_UTIL_GET_DEVICE_INFO,
bufLen, buf );
osal_mem_free( buf );
}
if ( assocList )
{
osal_mem_free( assocList );
}
}
/*********************************************************************
* @fn zllSampleLight_PrintNwkKey
*
* @brief Print current NWK key on the LCD screen
*
* @param reverse - TRUE to print the bytes in reverse order
*
* @return none
*/
static void zllSampleLight_PrintNwkKey( uint8 reverse )
{
nwkKeyDesc KeyInfo;
uint8 lcd_buf[SEC_KEY_LEN+1];
uint8 lcd_buf1[SEC_KEY_LEN+1];
uint8 lcd_buf2[SEC_KEY_LEN+1];
uint8 i;
static uint8 clear = 1;
clear ^= 1;
if ( clear )
{
nwk_Status( NWK_STATUS_ROUTER_ADDR, _NIB.nwkDevAddress );
nwk_Status( NWK_STATUS_PARENT_ADDR, _NIB.nwkCoordAddress );
HalLcdWriteString( "", HAL_LCD_LINE_3 );
return;
}
// Swap active and alternate keys writing them directly to NV
osal_nv_read(ZCD_NV_NWK_ACTIVE_KEY_INFO, 0,
sizeof(nwkKeyDesc), &KeyInfo);
for (i = 0; i < SEC_KEY_LEN/2; i++)
{
uint8 key = KeyInfo.key[i];
_itoa(KeyInfo.key[i], &lcd_buf[i*2], 16);
if( (key & 0xF0) == 0)
{
//_itoa shift to significant figures, so swaps bytes if 0x0?
lcd_buf[(i*2) + 1] = lcd_buf[i*2];
lcd_buf[i*2] = '0';
}
if( (key & 0xF) == 0)
{
lcd_buf[(i*2) + 1] = '0';
}
}
if ( reverse )
{
//print in daintree format. Reverse bytes.
for (i = 0; i < (SEC_KEY_LEN); i+=2)
{
lcd_buf2[SEC_KEY_LEN - (i+2)] = lcd_buf[i];
lcd_buf2[SEC_KEY_LEN - (i+1)] = lcd_buf[i+1];
}
}
else
{
osal_memcpy(lcd_buf1, lcd_buf, SEC_KEY_LEN);
}
for (i = 0; i < SEC_KEY_LEN/2; i++)
{
uint8 key = KeyInfo.key[i + SEC_KEY_LEN/2];
_itoa(KeyInfo.key[i + SEC_KEY_LEN/2], &lcd_buf[i*2], 16);
if( (key & 0xF0) == 0)
{
//_itoa shift to significant figures, so swaps bytes if 0x0?
lcd_buf[(i*2) + 1] = lcd_buf[i*2];
lcd_buf[i*2] = '0';
}
if( (key & 0xF) == 0)
{
lcd_buf[(i*2) + 1] = '0';
}
}
if ( reverse )
{
//print in daintree format. Reverse bytes.
for (i = 0; i < (SEC_KEY_LEN); i+=2)
{
lcd_buf1[SEC_KEY_LEN - (i+2)] = lcd_buf[i];
lcd_buf1[SEC_KEY_LEN - (i+1)] = lcd_buf[i+1];
}
}
else
{
osal_memcpy(lcd_buf2, lcd_buf, SEC_KEY_LEN);
}
lcd_buf1[SEC_KEY_LEN] = '\0';
lcd_buf2[SEC_KEY_LEN] = '\0';
if ( reverse )
{
HalLcdWriteString( "NWK KEY (Rev.):", HAL_LCD_LINE_1 );
}
else
{
HalLcdWriteString( "NWK KEY: ", HAL_LCD_LINE_1 );
}
HalLcdWriteString( (char*)lcd_buf1, HAL_LCD_LINE_2 );
HalLcdWriteString( (char*)lcd_buf2, HAL_LCD_LINE_3 );
}
/*********************************************************************
* @fn BindCopyBackupToNewNV
*
* @brief Creates the New NV item, copies the backup data into
* the New NV ID, and Deletes the duplicate NV item.
*
* @param dupLen - NV item length of the old Binding table.
* @param newLen - NV item length of the new Binding table to be created.
*
* @return ZSuccess - All the actions were successful.
* ZFailure - Any of the actions failed.
*/
static uint8 BindCopyBackupToNewNV( uint16 dupLen, uint16 newLen )
{
uint8 status = ZSuccess;
uint16 bindLen;
bindLen = osal_nv_item_len( ZCD_NV_BINDING_TABLE );
if ( ( bindLen > 0 ) && ( bindLen != newLen ) )
{
// The existing item does not match the New length
osal_nv_delete( ZCD_NV_BINDING_TABLE, bindLen );
}
// Create Binding Table NV item with the NEW legth
if ( osal_nv_item_init( ZCD_NV_BINDING_TABLE, newLen, NULL ) != NV_OPER_FAILED )
{
nvBindingHdr_t hdrBackup;
// Copy ONLY the valid records from the duplicate NV table into the new table
// at the end of this process the table content will be compacted
if ( osal_nv_read( ZCD_NV_DUPLICATE_BINDING_TABLE, 0, sizeof(nvBindingHdr_t), &hdrBackup ) == ZSuccess )
{
bindTableIndex_t i;
uint16 validBackupRecs = 0;
BindingEntry_t backupRec;
// Read in the device list. This loop will stop when:
// The total number of valid records has been reached either because:
// The new table is full of valid records OR
// The old table has less valid records than the size of the table
for ( i = 0; ( validBackupRecs < gNWK_MAX_BINDING_ENTRIES ) && ( validBackupRecs < hdrBackup.numRecs ); i++ )
{
if ( osal_nv_read( ZCD_NV_DUPLICATE_BINDING_TABLE,
(uint16)(sizeof(nvBindingHdr_t) + (i * NV_BIND_REC_SIZE)),
NV_BIND_REC_SIZE, &backupRec ) == ZSuccess )
{
if ( backupRec.srcEP != NV_BIND_EMPTY )
{
// Save the valid record into the NEW NV table.
if ( osal_nv_write( ZCD_NV_BINDING_TABLE,
(uint16)((sizeof(nvBindingHdr_t)) + (validBackupRecs * NV_BIND_REC_SIZE)),
NV_BIND_REC_SIZE, &backupRec ) != ZSuccess )
{
status = ZFailure;
break; // Terminate the loop as soon as a problem with NV is detected
}
validBackupRecs++;
}
}
else
{
status = ZFailure;
break; // Terminate the loop as soon as a problem with NV is detected
}
}
// Only save the header and delete the duplicate element if the previous
// process was successful
if ( status == ZSuccess )
{
// Save off the header
if ( osal_nv_write( ZCD_NV_BINDING_TABLE, 0,
sizeof(nvBindingHdr_t), &validBackupRecs ) == ZSuccess )
{
// Delete the duplicate NV Item, once the data has been stored in the NEW table
if ( osal_nv_delete( ZCD_NV_DUPLICATE_BINDING_TABLE, dupLen ) != ZSuccess )
{
status = ZFailure;
}
}
else
{
status = ZFailure;
}
}
}
else
{
status = ZFailure;
}
}
else
{
status = ZFailure;
}
return ( status );
}
/****************************************************************************
* @fn ZDiagsGetStatsAttr
*
* @brief Reads specific systemID statistics and/or metrics
*
* @param attributeId input - unique identifier for the required attribute
*
* NOTE: the user of this function will have to cast the value
* based on the type of the attributeID, the returned value
* will allways be uint32.
*
* @return Value of the attribute requested.
*/
uint32 ZDiagsGetStatsAttr( uint16 attributeId )
{
uint32 diagsValue = 0;
#if defined ( FEATURE_SYSTEM_STATS )
switch ( attributeId )
{
// System and Hardware Diagnostics
case ZDIAGS_SYSTEM_CLOCK:
// this is the system clock when statistics were cleared;
diagsValue = DiagsStatsTable.SysClock;
break;
case ZDIAGS_NUMBER_OF_RESETS:
// Get the value from NV memory
osal_nv_read( ZCD_NV_BOOTCOUNTER, 0, sizeof(uint16), &diagsValue );
break;
case ZDIAGS_PERSISTENT_MEMORY_WRITES:
diagsValue = DiagsStatsTable.PersistentMemoryWrites;
break;
// MAC Diagnostics
case ZDIAGS_MAC_RX_CRC_PASS:
ZMacGetReq( ZMacDiagsRxCrcPass, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacRxCrcPass = diagsValue;
break;
case ZDIAGS_MAC_RX_CRC_FAIL:
ZMacGetReq( ZMacDiagsRxCrcFail, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacRxCrcFail = diagsValue;
break;
case ZDIAGS_MAC_RX_BCAST:
ZMacGetReq( ZMacDiagsRxBcast, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacRxBcast = diagsValue;
break;
case ZDIAGS_MAC_TX_BCAST:
ZMacGetReq( ZMacDiagsTxBcast, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacTxBcast = diagsValue;
break;
case ZDIAGS_MAC_RX_UCAST:
ZMacGetReq( ZMacDiagsRxUcast, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacRxUcast = diagsValue;
break;
case ZDIAGS_MAC_TX_UCAST:
ZMacGetReq( ZMacDiagsTxUcast, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacTxUcast = diagsValue;
break;
case ZDIAGS_MAC_TX_UCAST_RETRY:
ZMacGetReq( ZMacDiagsTxUcastRetry, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacTxUcastRetry = diagsValue;
break;
case ZDIAGS_MAC_TX_UCAST_FAIL:
ZMacGetReq( ZMacDiagsTxUcastFail, (uint8 *)&diagsValue );
// Update the statistics table with this value from MAC
DiagsStatsTable.MacTxUcastFail = diagsValue;
break;
// NWK Diagnostics
case ZDIAGS_ROUTE_DISC_INITIATED:
diagsValue = DiagsStatsTable.RouteDiscInitiated;
break;
case ZDIAGS_NEIGHBOR_ADDED:
diagsValue = DiagsStatsTable.NeighborAdded;
break;
case ZDIAGS_NEIGHBOR_REMOVED:
diagsValue = DiagsStatsTable.NeighborRemoved;
break;
case ZDIAGS_NEIGHBOR_STALE:
diagsValue = DiagsStatsTable.NeighborStale;
break;
case ZDIAGS_JOIN_INDICATION:
diagsValue = DiagsStatsTable.JoinIndication;
break;
case ZDIAGS_CHILD_MOVED:
diagsValue = DiagsStatsTable.ChildMoved;
break;
case ZDIAGS_NWK_FC_FAILURE:
diagsValue = DiagsStatsTable.NwkFcFailure;
break;
case ZDIAGS_NWK_DECRYPT_FAILURES:
diagsValue = DiagsStatsTable.NwkDecryptFailures;
break;
case ZDIAGS_PACKET_BUFFER_ALLOCATE_FAILURES:
diagsValue = DiagsStatsTable.PacketBufferAllocateFailures;
break;
case ZDIAGS_RELAYED_UCAST:
diagsValue = DiagsStatsTable.RelayedUcast;
break;
case ZDIAGS_PHY_TO_MAC_QUEUE_LIMIT_REACHED:
diagsValue = DiagsStatsTable.PhyToMacQueueLimitReached;
break;
case ZDIAGS_PACKET_VALIDATE_DROP_COUNT:
diagsValue = DiagsStatsTable.PacketValidateDropCount;
break;
// APS Diagnostics
case ZDIAGS_APS_RX_BCAST:
diagsValue = DiagsStatsTable.ApsRxBcast;
break;
case ZDIAGS_APS_TX_BCAST:
diagsValue = DiagsStatsTable.ApsTxBcast;
break;
case ZDIAGS_APS_RX_UCAST:
diagsValue = DiagsStatsTable.ApsRxUcast;
break;
case ZDIAGS_APS_TX_UCAST_SUCCESS:
diagsValue = DiagsStatsTable.ApsTxUcastSuccess;
break;
case ZDIAGS_APS_TX_UCAST_RETRY:
diagsValue = DiagsStatsTable.ApsTxUcastRetry;
break;
case ZDIAGS_APS_TX_UCAST_FAIL:
diagsValue = DiagsStatsTable.ApsTxUcastFail;
break;
case ZDIAGS_APS_FC_FAILURE:
diagsValue = DiagsStatsTable.ApsFcFailure;
break;
case ZDIAGS_APS_UNAUTHORIZED_KEY:
diagsValue = DiagsStatsTable.ApsUnauthorizedKey;
break;
case ZDIAGS_APS_DECRYPT_FAILURES:
diagsValue = DiagsStatsTable.ApsDecryptFailures;
break;
case ZDIAGS_APS_INVALID_PACKETS:
diagsValue = DiagsStatsTable.ApsInvalidPackets;
break;
case ZDIAGS_MAC_RETRIES_PER_APS_TX_SUCCESS:
diagsValue = DiagsStatsTable.MacRetriesPerApsTxSuccess;
break;
default:
break;
}
#endif // FEATURE_SYSTEM_STATS
return ( diagsValue );
}
