static int set_lft_block(IN osm_switch_t *p_sw, IN osm_ucast_mgr_t *p_mgr,
IN uint16_t block_id_ho)
{
uint8_t block[IB_SMP_DATA_SIZE];
osm_madw_context_t context;
osm_dr_path_t *p_path;
ib_api_status_t status;
/*
Send linear forwarding table blocks to the switch
as long as the switch indicates it has blocks needing
configuration.
*/
if (!p_sw->new_lft) {
/* any routing should provide the new_lft */
CL_ASSERT(p_mgr->p_subn->opt.use_ucast_cache &&
p_mgr->cache_valid && !p_sw->need_update);
return -1;
}
p_path = osm_physp_get_dr_path_ptr(osm_node_get_physp_ptr(p_sw->p_node, 0));
context.lft_context.node_guid = osm_node_get_node_guid(p_sw->p_node);
context.lft_context.set_method = TRUE;
if (!osm_switch_get_lft_block(p_sw, block_id_ho, block) ||
(!p_sw->need_update && !p_mgr->p_subn->need_update &&
!memcmp(block, p_sw->new_lft + block_id_ho * IB_SMP_DATA_SIZE,
IB_SMP_DATA_SIZE)))
return 0;
OSM_LOG(p_mgr->p_log, OSM_LOG_DEBUG,
"Writing FT block %u to switch 0x%" PRIx64 "\n", block_id_ho,
cl_ntoh64(context.lft_context.node_guid));
status = osm_req_set(p_mgr->sm, p_path,
p_sw->new_lft + block_id_ho * IB_SMP_DATA_SIZE,
IB_SMP_DATA_SIZE, IB_MAD_ATTR_LIN_FWD_TBL,
cl_hton32(block_id_ho),
CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS) {
OSM_LOG(p_mgr->p_log, OSM_LOG_ERROR, "ERR 3A05: "
"Sending linear fwd. tbl. block failed (%s)\n",
ib_get_err_str(status));
return -1;
}
return 0;
}
static ib_api_status_t sl2vl_update_table(osm_sm_t * sm,
osm_physp_t * p, uint8_t in_port,
uint8_t out_port,
unsigned force_update,
const ib_slvl_table_t * sl2vl_table)
{
osm_madw_context_t context;
ib_slvl_table_t tbl, *p_tbl;
osm_node_t *p_node = osm_physp_get_node_ptr(p);
uint32_t attr_mod;
unsigned vl_mask;
uint8_t vl1, vl2;
int i;
vl_mask = (1 << (ib_port_info_get_op_vls(&p->port_info) - 1)) - 1;
for (i = 0; i < IB_MAX_NUM_VLS / 2; i++) {
vl1 = sl2vl_table->raw_vl_by_sl[i] >> 4;
vl2 = sl2vl_table->raw_vl_by_sl[i] & 0xf;
if (vl1 != 15)
vl1 &= vl_mask;
if (vl2 != 15)
vl2 &= vl_mask;
tbl.raw_vl_by_sl[i] = (vl1 << 4) | vl2;
}
if (!force_update && (p_tbl = osm_physp_get_slvl_tbl(p, in_port)) &&
!memcmp(p_tbl, &tbl, sizeof(tbl)))
return IB_SUCCESS;
context.slvl_context.node_guid = osm_node_get_node_guid(p_node);
context.slvl_context.port_guid = osm_physp_get_port_guid(p);
context.slvl_context.set_method = TRUE;
attr_mod = in_port << 8 | out_port;
return osm_req_set(sm, osm_physp_get_dr_path_ptr(p),
(uint8_t *) & tbl, sizeof(tbl),
IB_MAD_ATTR_SLVL_TABLE,
cl_hton32(attr_mod), CL_DISP_MSGID_NONE, &context);
}
/*
* QoS primitives
*/
static ib_api_status_t vlarb_update_table_block(osm_sm_t * sm,
osm_physp_t * p,
uint8_t port_num,
unsigned force_update,
const ib_vl_arb_table_t *
table_block,
unsigned block_length,
unsigned block_num)
{
ib_vl_arb_table_t block;
osm_madw_context_t context;
uint32_t attr_mod;
unsigned vl_mask, i;
vl_mask = (1 << (ib_port_info_get_op_vls(&p->port_info) - 1)) - 1;
memset(&block, 0, sizeof(block));
memcpy(&block, table_block, block_length * sizeof(block.vl_entry[0]));
for (i = 0; i < block_length; i++)
block.vl_entry[i].vl &= vl_mask;
if (!force_update &&
!memcmp(&p->vl_arb[block_num], &block,
block_length * sizeof(block.vl_entry[0])))
return IB_SUCCESS;
context.vla_context.node_guid =
osm_node_get_node_guid(osm_physp_get_node_ptr(p));
context.vla_context.port_guid = osm_physp_get_port_guid(p);
context.vla_context.set_method = TRUE;
attr_mod = ((block_num + 1) << 16) | port_num;
return osm_req_set(sm, osm_physp_get_dr_path_ptr(p),
(uint8_t *) & block, sizeof(block),
IB_MAD_ATTR_VL_ARBITRATION,
cl_hton32(attr_mod), CL_DISP_MSGID_NONE, &context);
}
static boolean_t
__osm_link_mgr_set_physp_pi(osm_sm_t * sm,
IN osm_physp_t * const p_physp,
IN uint8_t const port_state)
{
uint8_t payload[IB_SMP_DATA_SIZE];
ib_port_info_t *const p_pi = (ib_port_info_t *) payload;
const ib_port_info_t *p_old_pi;
osm_madw_context_t context;
osm_node_t *p_node;
ib_api_status_t status;
uint8_t port_num;
uint8_t mtu;
uint8_t op_vls;
boolean_t esp0 = FALSE;
boolean_t send_set = FALSE;
osm_physp_t *p_remote_physp;
OSM_LOG_ENTER(sm->p_log);
p_node = osm_physp_get_node_ptr(p_physp);
port_num = osm_physp_get_port_num(p_physp);
if (port_num == 0) {
/*
CAs don't have a port 0, and for switch port 0,
we need to check if this is enhanced or base port 0.
For base port 0 the following parameters are not valid (p822, table 145).
*/
if (!p_node->sw) {
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 4201: "
"Cannot find switch by guid: 0x%" PRIx64 "\n",
cl_ntoh64(p_node->node_info.node_guid));
goto Exit;
}
if (ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info)
== FALSE) {
/* This means the switch doesn't support enhanced port 0.
Can skip it. */
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Skipping port 0, GUID 0x%016" PRIx64 "\n",
cl_ntoh64(osm_physp_get_port_guid(p_physp)));
goto Exit;
}
esp0 = TRUE;
}
/*
PAST THIS POINT WE ARE HANDLING EITHER A NON PORT 0 OR ENHANCED PORT 0
*/
p_old_pi = &p_physp->port_info;
memset(payload, 0, IB_SMP_DATA_SIZE);
memcpy(payload, p_old_pi, sizeof(ib_port_info_t));
/*
Should never write back a value that is bigger then 3 in
the PortPhysicalState field - so can not simply copy!
Actually we want to write there:
port physical state - no change,
link down default state = polling
port state - as requested.
*/
p_pi->state_info2 = 0x02;
ib_port_info_set_port_state(p_pi, port_state);
if (ib_port_info_get_link_down_def_state(p_pi) !=
ib_port_info_get_link_down_def_state(p_old_pi))
send_set = TRUE;
/* didn't get PortInfo before */
if (!ib_port_info_get_port_state(p_old_pi))
send_set = TRUE;
/* we only change port fields if we do not change state */
if (port_state == IB_LINK_NO_CHANGE) {
/* The following fields are relevant only for CA port, router, or Enh. SP0 */
if (osm_node_get_type(p_node) != IB_NODE_TYPE_SWITCH ||
port_num == 0) {
p_pi->m_key = sm->p_subn->opt.m_key;
if (memcmp(&p_pi->m_key, &p_old_pi->m_key,
sizeof(p_pi->m_key)))
send_set = TRUE;
p_pi->subnet_prefix = sm->p_subn->opt.subnet_prefix;
if (memcmp(&p_pi->subnet_prefix,
&p_old_pi->subnet_prefix,
sizeof(p_pi->subnet_prefix)))
send_set = TRUE;
p_pi->base_lid = osm_physp_get_base_lid(p_physp);
if (memcmp(&p_pi->base_lid, &p_old_pi->base_lid,
sizeof(p_pi->base_lid)))
send_set = TRUE;
/* we are initializing the ports with our local sm_base_lid */
p_pi->master_sm_base_lid = sm->p_subn->sm_base_lid;
if (memcmp(&p_pi->master_sm_base_lid,
&p_old_pi->master_sm_base_lid,
sizeof(p_pi->master_sm_base_lid)))
send_set = TRUE;
p_pi->m_key_lease_period =
sm->p_subn->opt.m_key_lease_period;
if (memcmp(&p_pi->m_key_lease_period,
&p_old_pi->m_key_lease_period,
sizeof(p_pi->m_key_lease_period)))
send_set = TRUE;
if (esp0 == FALSE)
p_pi->mkey_lmc = sm->p_subn->opt.lmc;
else {
if (sm->p_subn->opt.lmc_esp0)
p_pi->mkey_lmc = sm->p_subn->opt.lmc;
else
p_pi->mkey_lmc = 0;
}
if (memcmp(&p_pi->mkey_lmc, &p_old_pi->mkey_lmc,
sizeof(p_pi->mkey_lmc)))
send_set = TRUE;
ib_port_info_set_timeout(p_pi,
sm->p_subn->opt.
subnet_timeout);
if (ib_port_info_get_timeout(p_pi) !=
ib_port_info_get_timeout(p_old_pi))
send_set = TRUE;
}
/*
Several timeout mechanisms:
*/
p_remote_physp = osm_physp_get_remote(p_physp);
if (port_num != 0 && p_remote_physp) {
if (osm_node_get_type(osm_physp_get_node_ptr(p_physp))
== IB_NODE_TYPE_ROUTER) {
ib_port_info_set_hoq_lifetime(p_pi,
sm->p_subn->
opt.
leaf_head_of_queue_lifetime);
} else
if (osm_node_get_type
(osm_physp_get_node_ptr(p_physp)) ==
IB_NODE_TYPE_SWITCH) {
/* Is remote end CA or router (a leaf port) ? */
if (osm_node_get_type
(osm_physp_get_node_ptr(p_remote_physp)) !=
IB_NODE_TYPE_SWITCH) {
ib_port_info_set_hoq_lifetime(p_pi,
sm->
p_subn->
opt.
leaf_head_of_queue_lifetime);
ib_port_info_set_vl_stall_count(p_pi,
sm->
p_subn->
opt.
leaf_vl_stall_count);
} else {
ib_port_info_set_hoq_lifetime(p_pi,
sm->
p_subn->
opt.
head_of_queue_lifetime);
ib_port_info_set_vl_stall_count(p_pi,
sm->
p_subn->
opt.
vl_stall_count);
}
}
if (ib_port_info_get_hoq_lifetime(p_pi) !=
ib_port_info_get_hoq_lifetime(p_old_pi) ||
ib_port_info_get_vl_stall_count(p_pi) !=
ib_port_info_get_vl_stall_count(p_old_pi))
send_set = TRUE;
}
ib_port_info_set_phy_and_overrun_err_thd(p_pi,
sm->p_subn->opt.
local_phy_errors_threshold,
sm->p_subn->opt.
overrun_errors_threshold);
if (memcmp(&p_pi->error_threshold, &p_old_pi->error_threshold,
sizeof(p_pi->error_threshold)))
send_set = TRUE;
/*
Set the easy common parameters for all port types,
then determine the neighbor MTU.
*/
p_pi->link_width_enabled = p_old_pi->link_width_supported;
if (memcmp(&p_pi->link_width_enabled,
&p_old_pi->link_width_enabled,
sizeof(p_pi->link_width_enabled)))
send_set = TRUE;
if (sm->p_subn->opt.force_link_speed &&
(sm->p_subn->opt.force_link_speed != 15 ||
ib_port_info_get_link_speed_enabled(p_pi) !=
ib_port_info_get_link_speed_sup(p_pi))) {
ib_port_info_set_link_speed_enabled(p_pi,
sm->p_subn->opt.
force_link_speed);
if (memcmp(&p_pi->link_speed, &p_old_pi->link_speed,
sizeof(p_pi->link_speed)))
send_set = TRUE;
}
/* calc new op_vls and mtu */
op_vls =
osm_physp_calc_link_op_vls(sm->p_log, sm->p_subn, p_physp);
mtu = osm_physp_calc_link_mtu(sm->p_log, p_physp);
ib_port_info_set_neighbor_mtu(p_pi, mtu);
if (ib_port_info_get_neighbor_mtu(p_pi) !=
ib_port_info_get_neighbor_mtu(p_old_pi))
send_set = TRUE;
ib_port_info_set_op_vls(p_pi, op_vls);
if (ib_port_info_get_op_vls(p_pi) !=
ib_port_info_get_op_vls(p_old_pi))
send_set = TRUE;
/* provide the vl_high_limit from the qos mgr */
if (sm->p_subn->opt.qos &&
p_physp->vl_high_limit != p_old_pi->vl_high_limit) {
send_set = TRUE;
p_pi->vl_high_limit = p_physp->vl_high_limit;
}
}
if (port_state != IB_LINK_NO_CHANGE &&
port_state != ib_port_info_get_port_state(p_old_pi)) {
send_set = TRUE;
if (port_state == IB_LINK_ACTIVE)
context.pi_context.active_transition = TRUE;
else
context.pi_context.active_transition = FALSE;
}
context.pi_context.node_guid = osm_node_get_node_guid(p_node);
context.pi_context.port_guid = osm_physp_get_port_guid(p_physp);
context.pi_context.set_method = TRUE;
context.pi_context.light_sweep = FALSE;
/* We need to send the PortInfoSet request with the new sm_lid
in the following cases:
1. There is a change in the values (send_set == TRUE)
2. This is a switch external port (so it wasn't handled yet by
osm_lid_mgr) and first_time_master_sweep flag on the subnet is TRUE,
which means the SM just became master, and it then needs to send at
PortInfoSet to every port.
*/
if (osm_node_get_type(p_node) == IB_NODE_TYPE_SWITCH && port_num
&& sm->p_subn->first_time_master_sweep == TRUE)
send_set = TRUE;
if (send_set)
status = osm_req_set(sm, osm_physp_get_dr_path_ptr(p_physp),
payload, sizeof(payload),
IB_MAD_ATTR_PORT_INFO,
cl_hton32(port_num),
CL_DISP_MSGID_NONE, &context);
Exit:
OSM_LOG_EXIT(sm->p_log);
return send_set;
}
static int link_mgr_set_physp_pi(osm_sm_t * sm, IN osm_physp_t * p_physp,
IN uint8_t port_state)
{
uint8_t payload[IB_SMP_DATA_SIZE], payload2[IB_SMP_DATA_SIZE];
ib_port_info_t *p_pi = (ib_port_info_t *) payload;
ib_mlnx_ext_port_info_t *p_epi = (ib_mlnx_ext_port_info_t *) payload2;
const ib_port_info_t *p_old_pi;
const ib_mlnx_ext_port_info_t *p_old_epi;
osm_madw_context_t context;
osm_node_t *p_node;
ib_api_status_t status;
uint8_t port_num, mtu, op_vls, smsl = OSM_DEFAULT_SL;
boolean_t esp0 = FALSE, send_set = FALSE, send_set2 = FALSE;
osm_physp_t *p_remote_physp, *physp0;
int qdr_change = 0, fdr10_change = 0;
int ret = 0;
ib_net32_t attr_mod, cap_mask;
OSM_LOG_ENTER(sm->p_log);
p_node = osm_physp_get_node_ptr(p_physp);
p_old_pi = &p_physp->port_info;
port_num = osm_physp_get_port_num(p_physp);
if (port_num == 0) {
/*
CAs don't have a port 0, and for switch port 0,
we need to check if this is enhanced or base port 0.
For base port 0 the following parameters are not valid
(IBA 1.2.1 p.830 table 146).
*/
if (!p_node->sw) {
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 4201: "
"Cannot find switch by guid: 0x%" PRIx64 "\n",
cl_ntoh64(p_node->node_info.node_guid));
goto Exit;
}
if (ib_switch_info_is_enhanced_port0(&p_node->sw->switch_info)
== FALSE) {
/* Even for base port 0 we might have to set smsl
(if we are using lash routing) */
smsl = link_mgr_get_smsl(sm, p_physp);
if (smsl != ib_port_info_get_master_smsl(p_old_pi)) {
send_set = TRUE;
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Setting SMSL to %d on port 0 GUID 0x%016"
PRIx64 "\n", smsl,
cl_ntoh64(osm_physp_get_port_guid
(p_physp)));
} else {
/* This means the switch doesn't support
enhanced port 0 and we don't need to
change SMSL. Can skip it. */
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Skipping port 0, GUID 0x%016" PRIx64
"\n",
cl_ntoh64(osm_physp_get_port_guid
(p_physp)));
goto Exit;
}
} else
esp0 = TRUE;
}
memcpy(payload, p_old_pi, sizeof(ib_port_info_t));
/*
Should never write back a value that is bigger then 3 in
the PortPhysicalState field - so can not simply copy!
Actually we want to write there:
port physical state - no change,
link down default state = polling
port state - as requested.
*/
p_pi->state_info2 = 0x02;
ib_port_info_set_port_state(p_pi, port_state);
/* Check whether this is base port0 smsl handling only */
if (port_num == 0 && esp0 == FALSE) {
ib_port_info_set_master_smsl(p_pi, smsl);
goto Send;
}
/*
PAST THIS POINT WE ARE HANDLING EITHER A NON PORT 0 OR ENHANCED PORT 0
*/
if (ib_port_info_get_link_down_def_state(p_pi) !=
ib_port_info_get_link_down_def_state(p_old_pi))
send_set = TRUE;
/* didn't get PortInfo before */
if (!ib_port_info_get_port_state(p_old_pi))
send_set = TRUE;
/* we only change port fields if we do not change state */
if (port_state == IB_LINK_NO_CHANGE) {
/* The following fields are relevant only for CA port, router, or Enh. SP0 */
if (osm_node_get_type(p_node) != IB_NODE_TYPE_SWITCH ||
port_num == 0) {
p_pi->m_key = sm->p_subn->opt.m_key;
if (memcmp(&p_pi->m_key, &p_old_pi->m_key,
sizeof(p_pi->m_key)))
send_set = TRUE;
p_pi->subnet_prefix = sm->p_subn->opt.subnet_prefix;
if (memcmp(&p_pi->subnet_prefix,
&p_old_pi->subnet_prefix,
sizeof(p_pi->subnet_prefix)))
send_set = TRUE;
p_pi->base_lid = osm_physp_get_base_lid(p_physp);
if (memcmp(&p_pi->base_lid, &p_old_pi->base_lid,
sizeof(p_pi->base_lid)))
send_set = TRUE;
/* we are initializing the ports with our local sm_base_lid */
p_pi->master_sm_base_lid = sm->p_subn->sm_base_lid;
if (memcmp(&p_pi->master_sm_base_lid,
&p_old_pi->master_sm_base_lid,
sizeof(p_pi->master_sm_base_lid)))
send_set = TRUE;
smsl = link_mgr_get_smsl(sm, p_physp);
if (smsl != ib_port_info_get_master_smsl(p_old_pi)) {
ib_port_info_set_master_smsl(p_pi, smsl);
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Setting SMSL to %d on GUID 0x%016"
PRIx64 ", port %d\n", smsl,
cl_ntoh64(osm_physp_get_port_guid
(p_physp)), port_num);
send_set = TRUE;
}
p_pi->m_key_lease_period =
sm->p_subn->opt.m_key_lease_period;
if (memcmp(&p_pi->m_key_lease_period,
&p_old_pi->m_key_lease_period,
sizeof(p_pi->m_key_lease_period)))
send_set = TRUE;
/* M_KeyProtectBits are currently always zero */
p_pi->mkey_lmc = 0;
if (esp0 == FALSE || sm->p_subn->opt.lmc_esp0)
ib_port_info_set_lmc(p_pi, sm->p_subn->opt.lmc);
if (ib_port_info_get_lmc(p_old_pi) !=
ib_port_info_get_lmc(p_pi) ||
ib_port_info_get_mpb(p_old_pi) !=
ib_port_info_get_mpb(p_pi))
send_set = TRUE;
ib_port_info_set_timeout(p_pi,
sm->p_subn->opt.
subnet_timeout);
if (ib_port_info_get_timeout(p_pi) !=
ib_port_info_get_timeout(p_old_pi))
send_set = TRUE;
}
/*
Several timeout mechanisms:
*/
p_remote_physp = osm_physp_get_remote(p_physp);
if (port_num != 0 && p_remote_physp) {
if (osm_node_get_type(osm_physp_get_node_ptr(p_physp))
== IB_NODE_TYPE_ROUTER) {
ib_port_info_set_hoq_lifetime(p_pi,
sm->p_subn->
opt.
leaf_head_of_queue_lifetime);
} else
if (osm_node_get_type
(osm_physp_get_node_ptr(p_physp)) ==
IB_NODE_TYPE_SWITCH) {
/* Is remote end CA or router (a leaf port) ? */
if (osm_node_get_type
(osm_physp_get_node_ptr(p_remote_physp)) !=
IB_NODE_TYPE_SWITCH) {
ib_port_info_set_hoq_lifetime(p_pi,
sm->
p_subn->
opt.
leaf_head_of_queue_lifetime);
ib_port_info_set_vl_stall_count(p_pi,
sm->
p_subn->
opt.
leaf_vl_stall_count);
} else {
ib_port_info_set_hoq_lifetime(p_pi,
sm->
p_subn->
opt.
head_of_queue_lifetime);
ib_port_info_set_vl_stall_count(p_pi,
sm->
p_subn->
opt.
vl_stall_count);
}
}
if (ib_port_info_get_hoq_lifetime(p_pi) !=
ib_port_info_get_hoq_lifetime(p_old_pi) ||
ib_port_info_get_vl_stall_count(p_pi) !=
ib_port_info_get_vl_stall_count(p_old_pi))
send_set = TRUE;
}
ib_port_info_set_phy_and_overrun_err_thd(p_pi,
sm->p_subn->opt.
local_phy_errors_threshold,
sm->p_subn->opt.
overrun_errors_threshold);
if (memcmp(&p_pi->error_threshold, &p_old_pi->error_threshold,
sizeof(p_pi->error_threshold)))
send_set = TRUE;
/*
Set the easy common parameters for all port types,
then determine the neighbor MTU.
*/
p_pi->link_width_enabled = p_old_pi->link_width_supported;
if (memcmp(&p_pi->link_width_enabled,
&p_old_pi->link_width_enabled,
sizeof(p_pi->link_width_enabled)))
send_set = TRUE;
if (sm->p_subn->opt.force_link_speed &&
(sm->p_subn->opt.force_link_speed != 15 ||
ib_port_info_get_link_speed_enabled(p_pi) !=
ib_port_info_get_link_speed_sup(p_pi))) {
ib_port_info_set_link_speed_enabled(p_pi,
sm->p_subn->opt.
force_link_speed);
if (memcmp(&p_pi->link_speed, &p_old_pi->link_speed,
sizeof(p_pi->link_speed))) {
send_set = TRUE;
/* Determine whether QDR in LSE is being changed */
if ((ib_port_info_get_link_speed_enabled(p_pi) &
IB_LINK_SPEED_ACTIVE_10 &&
!(ib_port_info_get_link_speed_enabled(p_old_pi) &
IB_LINK_SPEED_ACTIVE_10)) ||
((!(ib_port_info_get_link_speed_enabled(p_pi) &
IB_LINK_SPEED_ACTIVE_10) &&
ib_port_info_get_link_speed_enabled(p_old_pi) &
IB_LINK_SPEED_ACTIVE_10)))
qdr_change = 1;
}
}
if (sm->p_subn->opt.fdr10 &&
p_physp->ext_port_info.link_speed_supported & FDR10) {
if (sm->p_subn->opt.fdr10 == 1) { /* enable */
if (!(p_physp->ext_port_info.link_speed_enabled & FDR10))
fdr10_change = 1;
} else { /* disable */
if (p_physp->ext_port_info.link_speed_enabled & FDR10)
fdr10_change = 1;
}
if (fdr10_change) {
p_old_epi = &p_physp->ext_port_info;
memcpy(payload2, p_old_epi,
sizeof(ib_mlnx_ext_port_info_t));
p_epi->state_change_enable = 0x01;
if (sm->p_subn->opt.fdr10 == 1)
p_epi->link_speed_enabled = FDR10;
else
p_epi->link_speed_enabled = 0;
send_set2 = TRUE;
}
}
if (osm_node_get_type(p_physp->p_node) == IB_NODE_TYPE_SWITCH) {
physp0 = osm_node_get_physp_ptr(p_physp->p_node, 0);
cap_mask = physp0->port_info.capability_mask;
} else
cap_mask = p_pi->capability_mask;
if (!(cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS))
qdr_change = 0;
/* Do peer ports support extended link speeds ? */
if (port_num != 0 && p_remote_physp) {
osm_physp_t *rphysp0;
ib_net32_t rem_cap_mask;
if (osm_node_get_type(p_remote_physp->p_node) ==
IB_NODE_TYPE_SWITCH) {
rphysp0 = osm_node_get_physp_ptr(p_remote_physp->p_node, 0);
rem_cap_mask = rphysp0->port_info.capability_mask;
} else
rem_cap_mask = p_remote_physp->port_info.capability_mask;
if (cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS &&
rem_cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS) {
if (sm->p_subn->opt.force_link_speed_ext &&
(sm->p_subn->opt.force_link_speed_ext != IB_LINK_SPEED_EXT_SET_LSES ||
p_pi->link_speed_ext_enabled !=
ib_port_info_get_link_speed_sup(p_pi))) {
p_pi->link_speed_ext_enabled = sm->p_subn->opt.force_link_speed_ext;
if (memcmp(&p_pi->link_speed_ext_enabled,
&p_old_pi->link_speed_ext_enabled,
sizeof(p_pi->link_speed_ext_enabled)))
send_set = TRUE;
}
}
}
/* calc new op_vls and mtu */
op_vls =
osm_physp_calc_link_op_vls(sm->p_log, sm->p_subn, p_physp);
mtu = osm_physp_calc_link_mtu(sm->p_log, p_physp);
ib_port_info_set_neighbor_mtu(p_pi, mtu);
if (ib_port_info_get_neighbor_mtu(p_pi) !=
ib_port_info_get_neighbor_mtu(p_old_pi))
send_set = TRUE;
ib_port_info_set_op_vls(p_pi, op_vls);
if (ib_port_info_get_op_vls(p_pi) !=
ib_port_info_get_op_vls(p_old_pi))
send_set = TRUE;
/* provide the vl_high_limit from the qos mgr */
if (sm->p_subn->opt.qos &&
p_physp->vl_high_limit != p_old_pi->vl_high_limit) {
send_set = TRUE;
p_pi->vl_high_limit = p_physp->vl_high_limit;
}
}
Send:
if (port_state != IB_LINK_NO_CHANGE &&
port_state != ib_port_info_get_port_state(p_old_pi)) {
send_set = TRUE;
if (port_state == IB_LINK_ACTIVE)
context.pi_context.active_transition = TRUE;
else
context.pi_context.active_transition = FALSE;
}
context.pi_context.node_guid = osm_node_get_node_guid(p_node);
context.pi_context.port_guid = osm_physp_get_port_guid(p_physp);
context.pi_context.set_method = TRUE;
context.pi_context.light_sweep = FALSE;
/* We need to send the PortInfoSet request with the new sm_lid
in the following cases:
1. There is a change in the values (send_set == TRUE)
2. This is a switch external port (so it wasn't handled yet by
osm_lid_mgr) and first_time_master_sweep flag on the subnet is TRUE,
which means the SM just became master, and it then needs to send at
PortInfoSet to every port.
*/
if (osm_node_get_type(p_node) == IB_NODE_TYPE_SWITCH && port_num
&& sm->p_subn->first_time_master_sweep == TRUE)
send_set = TRUE;
if (!send_set)
goto Exit;
attr_mod = cl_hton32(port_num);
if (qdr_change)
attr_mod |= cl_hton32(1 << 31); /* AM SMSupportExtendedSpeeds */
status = osm_req_set(sm, osm_physp_get_dr_path_ptr(p_physp),
payload, sizeof(payload), IB_MAD_ATTR_PORT_INFO,
attr_mod, CL_DISP_MSGID_NONE, &context);
if (status)
ret = -1;
if (send_set2) {
status = osm_req_set(sm, osm_physp_get_dr_path_ptr(p_physp),
payload2, sizeof(payload2),
IB_MAD_ATTR_MLNX_EXTENDED_PORT_INFO,
cl_hton32(port_num),
CL_DISP_MSGID_NONE, &context);
if (status)
ret = -1;
}
Exit:
OSM_LOG_EXIT(sm->p_log);
return ret;
}
/**********************************************************************
* Send SubnSet(SMInfo) SMP with HANDOVER attribute to the
* remote_sm indicated.
**********************************************************************/
static void state_mgr_send_handover(IN osm_sm_t * sm, IN osm_remote_sm_t * p_sm)
{
uint8_t payload[IB_SMP_DATA_SIZE];
ib_sm_info_t *p_smi = (ib_sm_info_t *) payload;
osm_madw_context_t context;
const osm_port_t *p_port;
ib_api_status_t status;
OSM_LOG_ENTER(sm->p_log);
/*
* Send a query of SubnSet(SMInfo) HANDOVER to the remote sm given.
*/
memset(&context, 0, sizeof(context));
p_port = p_sm->p_port;
if (p_port == NULL) {
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 3316: "
"No port object on given remote_sm object\n");
goto Exit;
}
/* update the master_guid in the sm_state_mgr object according to */
/* the guid of the port where the new Master SM should reside. */
OSM_LOG(sm->p_log, OSM_LOG_VERBOSE,
"Handing over mastership. Updating sm_state_mgr master_guid: %016"
PRIx64 " (node %s)\n", cl_ntoh64(p_port->guid),
p_port->p_node ? p_port->p_node->print_desc : "UNKNOWN");
sm->master_sm_guid = p_port->guid;
context.smi_context.port_guid = p_port->guid;
context.smi_context.set_method = TRUE;
p_smi->guid = sm->p_subn->sm_port_guid;
p_smi->act_count = cl_hton32(sm->p_subn->p_osm->stats.qp0_mads_sent);
p_smi->pri_state = (uint8_t) (sm->p_subn->sm_state |
sm->p_subn->opt.sm_priority << 4);
/*
* Return 0 for the SM key unless we authenticate the requester
* as the master SM.
*/
if (ib_sminfo_get_state(&p_sm->smi) == IB_SMINFO_STATE_MASTER) {
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Responding to master SM with real sm_key\n");
p_smi->sm_key = sm->p_subn->opt.sm_key;
} else {
/* The requester is not authenticated as master - set sm_key to zero */
OSM_LOG(sm->p_log, OSM_LOG_DEBUG,
"Responding to SM not master with zero sm_key\n");
p_smi->sm_key = 0;
}
status = osm_req_set(sm, osm_physp_get_dr_path_ptr(p_port->p_physp),
payload, sizeof(payload), IB_MAD_ATTR_SM_INFO,
IB_SMINFO_ATTR_MOD_HANDOVER, CL_DISP_MSGID_NONE,
&context);
if (status != IB_SUCCESS)
OSM_LOG(sm->p_log, OSM_LOG_ERROR, "ERR 3317: "
"Failure requesting SMInfo (%s)\n",
ib_get_err_str(status));
Exit:
OSM_LOG_EXIT(sm->p_log);
}
static void ucast_mgr_set_fwd_top(IN cl_map_item_t * p_map_item,
IN void *cxt)
{
osm_ucast_mgr_t *p_mgr = cxt;
osm_switch_t * p_sw = (osm_switch_t *) p_map_item;
osm_node_t *p_node;
osm_physp_t *p_physp;
osm_dr_path_t *p_path;
osm_madw_context_t context;
ib_api_status_t status;
ib_switch_info_t si;
boolean_t set_swinfo_require = FALSE;
uint16_t lin_top;
uint8_t life_state;
CL_ASSERT(p_mgr);
OSM_LOG_ENTER(p_mgr->p_log);
CL_ASSERT(p_sw && p_sw->max_lid_ho);
p_node = p_sw->p_node;
CL_ASSERT(p_node);
if (p_mgr->max_lid < p_sw->max_lid_ho)
p_mgr->max_lid = p_sw->max_lid_ho;
p_physp = osm_node_get_physp_ptr(p_node, 0);
CL_ASSERT(p_physp);
p_path = osm_physp_get_dr_path_ptr(p_physp);
/*
Set the top of the unicast forwarding table.
*/
si = p_sw->switch_info;
lin_top = cl_hton16(p_sw->max_lid_ho);
if (lin_top != si.lin_top) {
set_swinfo_require = TRUE;
si.lin_top = lin_top;
context.si_context.lft_top_change = TRUE;
} else
context.si_context.lft_top_change = FALSE;
life_state = si.life_state;
ib_switch_info_set_life_time(&si, p_mgr->p_subn->opt.packet_life_time);
if (life_state != si.life_state)
set_swinfo_require = TRUE;
if (set_swinfo_require) {
OSM_LOG(p_mgr->p_log, OSM_LOG_DEBUG,
"Setting switch FT top to LID %u\n", p_sw->max_lid_ho);
context.si_context.light_sweep = FALSE;
context.si_context.node_guid = osm_node_get_node_guid(p_node);
context.si_context.set_method = TRUE;
status = osm_req_set(p_mgr->sm, p_path, (uint8_t *) & si,
sizeof(si), IB_MAD_ATTR_SWITCH_INFO,
0, FALSE,
ib_port_info_get_m_key(&p_physp->port_info),
CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS)
OSM_LOG(p_mgr->p_log, OSM_LOG_ERROR, "ERR 3A06: "
"Sending SwitchInfo attribute failed (%s)\n",
ib_get_err_str(status));
}
OSM_LOG_EXIT(p_mgr->p_log);
}
static void ucast_mgr_set_fwd_top(IN cl_map_item_t * p_map_item,
IN void *cxt)
{
osm_ucast_mgr_t *p_mgr = cxt;
osm_switch_t * p_sw = (osm_switch_t *) p_map_item;
osm_node_t *p_node;
osm_dr_path_t *p_path;
osm_madw_context_t context;
ib_api_status_t status;
ib_switch_info_t si;
boolean_t set_swinfo_require = FALSE;
uint16_t lin_top;
uint8_t life_state;
CL_ASSERT(p_mgr);
OSM_LOG_ENTER(p_mgr->p_log);
CL_ASSERT(p_sw);
p_node = p_sw->p_node;
CL_ASSERT(p_node);
if (p_mgr->max_lid < p_sw->max_lid_ho)
p_mgr->max_lid = p_sw->max_lid_ho;
p_path = osm_physp_get_dr_path_ptr(osm_node_get_physp_ptr(p_node, 0));
/*
Set the top of the unicast forwarding table.
*/
si = p_sw->switch_info;
lin_top = cl_hton16(p_sw->max_lid_ho);
if (lin_top != si.lin_top) {
set_swinfo_require = TRUE;
si.lin_top = lin_top;
}
/* check to see if the change state bit is on. If it is - then we
need to clear it. */
if (ib_switch_info_get_state_change(&si))
life_state = ((p_mgr->p_subn->opt.packet_life_time << 3)
| (si.life_state & IB_SWITCH_PSC)) & 0xfc;
else
life_state = (p_mgr->p_subn->opt.packet_life_time << 3) & 0xf8;
if (life_state != si.life_state || ib_switch_info_get_state_change(&si)) {
set_swinfo_require = TRUE;
si.life_state = life_state;
}
if (set_swinfo_require) {
OSM_LOG(p_mgr->p_log, OSM_LOG_DEBUG,
"Setting switch FT top to LID %u\n", p_sw->max_lid_ho);
context.si_context.light_sweep = FALSE;
context.si_context.node_guid = osm_node_get_node_guid(p_node);
context.si_context.set_method = TRUE;
status = osm_req_set(p_mgr->sm, p_path, (uint8_t *) & si,
sizeof(si), IB_MAD_ATTR_SWITCH_INFO,
0, CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS)
OSM_LOG(p_mgr->p_log, OSM_LOG_ERROR, "ERR 3A06: "
"Sending SwitchInfo attribute failed (%s)\n",
ib_get_err_str(status));
}
OSM_LOG_EXIT(p_mgr->p_log);
}
int osm_ucast_mgr_set_fwd_table(IN osm_ucast_mgr_t * const p_mgr,
IN osm_switch_t * const p_sw)
{
osm_node_t *p_node;
osm_dr_path_t *p_path;
osm_madw_context_t context;
ib_api_status_t status;
ib_switch_info_t si;
uint16_t block_id_ho = 0;
uint8_t block[IB_SMP_DATA_SIZE];
boolean_t set_swinfo_require = FALSE;
uint16_t lin_top;
uint8_t life_state;
CL_ASSERT(p_mgr);
OSM_LOG_ENTER(p_mgr->p_log);
CL_ASSERT(p_sw);
p_node = p_sw->p_node;
CL_ASSERT(p_node);
p_path = osm_physp_get_dr_path_ptr(osm_node_get_physp_ptr(p_node, 0));
/*
Set the top of the unicast forwarding table.
*/
si = p_sw->switch_info;
lin_top = cl_hton16(p_sw->max_lid_ho);
if (lin_top != si.lin_top) {
set_swinfo_require = TRUE;
si.lin_top = lin_top;
}
/* check to see if the change state bit is on. If it is - then we
need to clear it. */
if (ib_switch_info_get_state_change(&si))
life_state = ((p_mgr->p_subn->opt.packet_life_time << 3)
| (si.life_state & IB_SWITCH_PSC)) & 0xfc;
else
life_state = (p_mgr->p_subn->opt.packet_life_time << 3) & 0xf8;
if ((life_state != si.life_state)
|| ib_switch_info_get_state_change(&si)) {
set_swinfo_require = TRUE;
si.life_state = life_state;
}
if (set_swinfo_require) {
OSM_LOG(p_mgr->p_log, OSM_LOG_DEBUG,
"Setting switch FT top to LID %u\n", p_sw->max_lid_ho);
context.si_context.light_sweep = FALSE;
context.si_context.node_guid = osm_node_get_node_guid(p_node);
context.si_context.set_method = TRUE;
status = osm_req_set(p_mgr->sm, p_path, (uint8_t *) & si,
sizeof(si),
IB_MAD_ATTR_SWITCH_INFO,
0, CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS)
OSM_LOG(p_mgr->p_log, OSM_LOG_ERROR, "ERR 3A06: "
"Sending SwitchInfo attribute failed (%s)\n",
ib_get_err_str(status));
}
/*
Send linear forwarding table blocks to the switch
as long as the switch indicates it has blocks needing
configuration.
*/
context.lft_context.node_guid = osm_node_get_node_guid(p_node);
context.lft_context.set_method = TRUE;
if (!p_sw->new_lft) {
/* any routing should provide the new_lft */
CL_ASSERT(p_mgr->p_subn->opt.use_ucast_cache &&
p_mgr->cache_valid && !p_sw->need_update);
goto Exit;
}
for (block_id_ho = 0;
osm_switch_get_lft_block(p_sw, block_id_ho, block);
block_id_ho++) {
if (!p_sw->need_update &&
!memcmp(block,
p_sw->new_lft + block_id_ho * IB_SMP_DATA_SIZE,
IB_SMP_DATA_SIZE))
continue;
OSM_LOG(p_mgr->p_log, OSM_LOG_DEBUG,
"Writing FT block %u\n", block_id_ho);
status = osm_req_set(p_mgr->sm, p_path,
p_sw->new_lft + block_id_ho * IB_SMP_DATA_SIZE,
sizeof(block),
IB_MAD_ATTR_LIN_FWD_TBL,
cl_hton32(block_id_ho),
CL_DISP_MSGID_NONE, &context);
if (status != IB_SUCCESS)
OSM_LOG(p_mgr->p_log, OSM_LOG_ERROR, "ERR 3A05: "
"Sending linear fwd. tbl. block failed (%s)\n",
ib_get_err_str(status));
}
Exit:
OSM_LOG_EXIT(p_mgr->p_log);
return 0;
}
