//---------------------------------------------------------------------------
// Attempt to acquire a 1-Wire net using a USB port and a DS2490 based
// adapter.
//
// 'portnum' - number 0 to MAX_PORTNUM-1. This number is provided to
// indicate the symbolic port number.
// 'port_zstr' - zero terminated port name. For this platform
// use format 'DS2490-X' where X is the port number.
//
// Returns: TRUE - success, USB port opened
//
SMALLINT owAcquire(int portnum, char *port_zstr)
{
int retportnum = 0;
retportnum = owAcquireEx(port_zstr);
if ((retportnum < 0) || (retportnum != portnum))
{
// Failure from owAcquireEx or from not matching port numbers.
return FALSE;
}
return TRUE;
}
int main(void) {
uchar owAddrBytes[8];
uchar writeBuffer[] = {0x64, 0xEE, 0x00, 0x00, 0x00, 0x02, 0x03};
portNum = 0;
strcpy(portName,"DS2490-1");
strcpy(serial, "FA00000001743763");
portNum = owAcquireEx(portName);
if(portNum <= 0 ) {
printf("Error acquiring 1-wire USB device\n");
return 1;
}
// Convert string-based serial to owAddress
if(!checkSerial(serial, owAddrBytes)) {
owRelease(portNum);
return 1;
}
// DO STUFF HERE
owSerialNum(portNum, owAddrBytes, FALSE);
// 1) Test Maxq Read status
testMaxQReadStatus(portNum, owAddrBytes);
// 2) See what's in the command buffer initially
testReadCmdBuffer(portNum, owAddrBytes, 7);
// 3) Write something to the command buffer
testWriteCmdBufferExStart(portNum, owAddrBytes, writeBuffer, 7);
// 4) Test Maxq Read status
testMaxQReadStatus(portNum, owAddrBytes);
// 5) Read back what we wrote
testReadCmdBuffer(portNum, owAddrBytes, 7);
// Notice that the write succeeds but the release sequence response fails.
owRelease(portNum);
printf("Finished Successfully\n");
return 0;
}
//----------------------------------------------------------------------
// This is the Main routine for debit
//
int main(short argc, char **argv)
{
char msg[200];
int portnum = 0;
float Vdd,Vad;
double humid,temp;
int i;
int numbat,cnt=0;
uchar famvolt[MAXDEVICES][8];
// check for required port name
if (argc != 2)
{
sprintf(msg,"1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
printf("%s",msg);
return 0;
}
if((portnum = owAcquireEx(argv[1])) < 0)
{
printf("Failed to acquire port.\n");
return 0;
}
else
{
do
{
numbat = FindDevices(portnum,&famvolt[0],SBATTERY_FAM,MAXDEVICES);
if(numbat == 0)
{
if(cnt > 1000)
{
cnt = 0;
printf("No humidity buttons found.\n");
}
else
{
cnt++;
}
}
else
{
for(i=0;i<numbat;i++)
{
Vdd = ReadAtoD(portnum,TRUE,&famvolt[0][0]);
if(Vdd > 5.8)
{
Vdd = (float)5.8;
}
else if(Vdd < 4.0)
{
Vdd = (float) 4.0;
}
Vad = ReadAtoD(portnum,FALSE,&famvolt[0][0]);
temp = Get_Temperature(portnum,&famvolt[0][0]);
humid = (((Vad/Vdd) - 0.16)/0.0062)/(1.0546 - 0.00216 * temp);
if(humid > 100)
{
humid = 100;
}
else if(humid < 0)
{
humid = 0;
}
printf("\n");
printf("The humidity is: %4.4f\n", humid);
printf("Given that the temp was: %2.2f\n", temp);
printf("and the volt supply was: %2.2f\n", Vdd);
printf("with the volt output was: %2.2f\n", Vad);
printf("\n");
}//for loop
}
}while(!key_abort());
owRelease(portnum);
printf("Port released.\n");
}
return 1;
}
//----------------------------------------------------------------------
// This is the Main routine for swtmain1c
//
int main(short argc, char **argv)
{
char msg[200];
uchar data[256];
int portnum = 0;
int n=0;
int addr = 0;
int len;
uchar es = 0x00;
uchar address[2];
ushort i;
uchar sn[8],state[3], reg[3], send_block[37];
uchar family[2][8];
int done=FALSE;
int channel=0,send_cnt=0;
SMALLINT alternate=TRUE, alt=FALSE;
ushort lastcrc16;
uchar latch, set;
uchar check;
// check for required port name
if (argc != 2)
{
sprintf(msg,"1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"1\" (Win32 TMEX)\n");
printf("%s",msg);
return 0;
}
if((portnum = owAcquireEx(argv[1])) < 0)
{
printf("Did not Acquire port.\n",1);
exit(1);
}
else
{
if(FindDevices(portnum,&family[0],0x1C,1))
{
for(i=0;i<8;i++)
sn[i] = family[0][i];
printf("device found: ");
for(i=0;i<8;i++)
printf("%02X ",sn[i]);
printf("\n");
do
{
printf("PICK AN OPERATION:\n\n");
printf("(1) Read Channel state\n"); // Gives channel information
printf("(2) Set Channel On/Off\n"); // Sets channel
printf("(3) Read Channel Mask\n"); // Read Selection Mask
printf("(4) Set Channel mask\n"); // Sets channel mask
printf("(5) Read Channel Polarity\n"); // Read Polarity Selection
printf("(6) Set Channel polarity\n"); // sets channel polarity
printf("(7) Read Control/Status Register\n"); // Read Control/Status Reg
printf("(8) Set Reset Mode On/Off\n"); // Set Reset Mode
printf("(9) Clear Power on Reset\n"); // Clear Power on reset
printf("(10) Get VCC state\n"); // Get VCC state
printf("(11) Set OR conditional search\n"); // or condition search
printf("(12) Set AND conditional search\n"); // and condition search
printf("(13) Write Scratchpad\n"); // write scratchpad command
printf("(14) Read Scratchpad\n"); // read scratchpad command
printf("(15) Copy Scratchpad\n"); // copy scratchpad command
printf("(16) Read Memory\n"); // read memory
printf("(17) PIO access read with CRC confirmation\n"); // access read
printf("(18) LED test\n"); // LED test
printf("(19) QUIT\n");
scanf("%d",&n);
if(n == 19)
{
n = 0; //used to finish off the loop
done = TRUE;
break;
}
switch(n)
{
case 1: // Channel Info
printf("\nEnter the channel\n");
scanf("%d",&channel);
if(readSwitch1C(portnum,&sn[0],&state[0]))
{
printf("The channel is ");
if(getLatchState1C(channel,&state[0]))
printf("on.\n");
else
printf("off\n");
printf("The Level is ");
if(getLevel1C(channel,&state[0]))
printf("high.\n");
else
printf("low.\n");
if(getSensedActivity1C(channel,&state[0]))
printf("Activity was detected on the channel.\n\n");
else
printf("No activity was detected on the channel.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 2: // Sets channel
printf("\nEnter the channel\n");
scanf("%d",&channel);
printf("Turn channel off enter 0, on 1.\n");
scanf("%d",&set);
if(setLatchState1C(portnum,&sn[0],channel,set))
{
printf("Latch was set ");
if(set)
printf("on.\n");
else
printf("off.\n");
}
else
OWERROR_DUMP(stdout);
break;
case 3: // Read Selection Mask
printf("\nEnter the channel\n");
scanf("%d",&channel);
if(readRegister1C(portnum,&sn[0],®[0]))
{
printf("register is %02X %02X %02X\n",reg[0],reg[1],reg[2]);
printf("The Selection Mask for channel %d is ",channel);
latch = (uchar) (0x01 << channel);
if((reg[0] & latch) == latch)
printf("set.\n\n");
else
printf("not set.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 4: // Sets channel mask
printf("\nEnter the channel\n");
scanf("%d",&channel);
printf("Turn channel mask off enter 0, on 1.\n");
scanf("%d",&set);
if(setChannelMask1C(portnum,&sn[0],channel,set))
{
printf("The mask for channel %d was set ",channel);
if(set)
printf("on.\n\n");
else
printf("off.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 5: // Read Polarity Selection
printf("\nEnter the channel\n");
scanf("%d",&channel);
printf("The Polarity for channel %d is ",channel);
if(getChannelPolarity1C(portnum,&sn[0],channel))
printf("set.\n\n");
else
printf("not set.\n\n");
break;
case 6: // sets channel polarity
printf("\nEnter the channel\n");
scanf("%d",&channel);
printf("Turn channel polarity off enter 0, on 1.\n");
scanf("%d",&set);
if(setChannelPolarity1C(portnum,&sn[0],channel,set))
{
printf("The polarity for channel %d was set ",channel);
if(set)
printf("on.\n\n");
else
printf("off.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 7: // Read Control/Status Reg
if(readRegister1C(portnum,&sn[0],®[0]))
printf("The Constrol/Status register is as following in hex %02X\n\n",
reg[2]);
else
OWERROR_DUMP(stdout);
break;
case 8: // Set Reset Mode
printf("Turn reset mode off enter 0, on 1.\n");
scanf("%d",&set);
if(setResetMode1C(portnum,&sn[0],set))
{
printf("Reset Mode was turned ");
if(set)
printf("on.\n\n");
else
printf("off.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 9: // Clear Power on reset
if(clearPowerOnReset1C(portnum,&sn[0]))
printf("Power on reset was cleared.\n\n");
else
OWERROR_DUMP(stdout);
break;
case 10: // Get VCC state
if(readRegister1C(portnum,&sn[0],®[0]))
{
printf("VCC state register is %02X\n",reg[2]);
if(getVCC1C(®[0]))
printf("VCC is powered.\n\n");
else
printf("VCC is grounded.\n\n");
}
else
OWERROR_DUMP(stdout);
break;
case 11: // or condition search
if(orConditionalSearch1C(portnum,&sn[0]))
printf("OR condition search was set.\n\n");
else
OWERROR_DUMP(stdout);
break;
case 12: // and condition search
if(andConditionalSearch1C(portnum,&sn[0]))
printf("AND condition search was set.\n\n");
else
OWERROR_DUMP(stdout);
break;
case 13: // write scratchpad
printf("Enter the address to start writing: ");
addr = getNumber(0, 550);
if(menuSelect(&sn[0]) == MODE_TEXT)
len = getData(data,MAX_LEN,MODE_TEXT);
else
len = getData(data,MAX_LEN,MODE_HEX);
if(!writeScratch1C(portnum,&sn[0],addr,len,&data[0]))
OWERROR_DUMP(stdout);
break;
case 14: // read scratchpad
if(!readScratch1C(portnum,&sn[0],&len,&es,&address[0],&data[0]))
{
printf("error\n");
OWERROR_DUMP(stdout);
}
else
{
printf("Address bytes: %02X %02X\n",address[0],address[1]);
printf("ES byte: %02X\n",es);
printf("Length: %d\n",len);
printf("Scratchpad data: ");
for(i=0;i<len;i++)
printf("%02X ",data[i]);
printf("\n");
}
break;
case 15: // copy scratchpad
if(!copyScratch1C(portnum,&sn[0]))
{
OWERROR_DUMP(stdout);
}
else
{
printf("Copy Scratchpad Complete.\n");
}
break;
case 16: // read memory
printf("Enter the address to start reading: ");
addr = getNumber(0, 550);
printf("Enter the length you want to read: ");
len = getNumber(0,256);
if(!read1C(portnum,&sn[0],addr,len,&data[0]))
{
OWERROR_DUMP(stdout);
}
else
{
for(i=0;i<len;i++)
printf("%02X ",data[i]);
printf("\n");
}
break;
case 17: // and condition search
if (!owTouchReset(portnum))
OWERROR_DUMP(stdout);
if(!owWriteByte(portnum,0xCC))
printf("skip rom error.\n");
owWriteByte(portnum,0xF5);
for(i=0;i<34;i++)
send_block[send_cnt++] = 0xFF;
if(!owBlock(portnum,FALSE,&send_block[0],send_cnt))
{
OWERROR(OWERROR_BLOCK_FAILED);
return FALSE;
}
setcrc16(portnum,0);
lastcrc16 = docrc16(portnum,0xF5);
for(i=0;i<34;i++)
lastcrc16 = docrc16(portnum,send_block[i]);
if(lastcrc16 != 0xB001)
printf("CRC didn't match.\n");
printf("read data: ");
for(i=0;i<34;i++)
printf("%02X ",send_block[i]);
printf("\n");
send_cnt = 0;
for(i=0;i<34;i++)
send_block[send_cnt++] = 0xFF;
if(!owBlock(portnum,FALSE,&send_block[0],send_cnt))
{
OWERROR(OWERROR_BLOCK_FAILED);
return FALSE;
}
setcrc16(portnum,0);
for(i=0;i<34;i++)
lastcrc16 = docrc16(portnum,send_block[i]);
if(lastcrc16 != 0xB001)
printf("CRC2 didn't match.\n");
printf("read data2: ");
for(i=0;i<34;i++)
printf("%02X ",send_block[i]);
printf("\n");
send_cnt = 0;
for(i=0;i<34;i++)
send_block[send_cnt++] = 0xFF;
if(!owBlock(portnum,FALSE,&send_block[0],send_cnt))
{
OWERROR(OWERROR_BLOCK_FAILED);
return FALSE;
}
setcrc16(portnum,0);
for(i=0;i<34;i++)
lastcrc16 = docrc16(portnum,send_block[i]);
if(lastcrc16 != 0xB001)
printf("CRC3 didn't match.\n");
printf("read data3: ");
for(i=0;i<34;i++)
printf("%02X ",send_block[i]);
printf("\n");
break;
case 18: // LED test
printf("\nEnter the channel to turn the LED on.\n");
scanf("%d",&channel);
printf("Turn reset mode off enter 1, on 0.\n");
scanf("%d",&set);
printf("Alternate on and off 0=No, 1=Yes.\n");
scanf("%d",&alternate);
if (!owTouchReset(portnum))
OWERROR_DUMP(stdout);
if(!owWriteByte(portnum,0xCC))
printf("skip rom error.\n");
owWriteByte(portnum,0x5A);
for(i=0;i<256;i++)
{
if(channel == 0)
{
if(set == 0)
{
if(!alternate)
{
if(!owWriteByte(portnum,0xFE))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x01))
printf("write byte error.\n");
check = 0xFE;
}
else
{
if(alt)
{
if(!owWriteByte(portnum,0xFE))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x01))
printf("write byte error.\n");
check = 0xFE;
alt = FALSE;
}
else
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
alt = TRUE;
}
}
}
else
{
if(!alternate)
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
}
else
{
if(alt)
{
if(!owWriteByte(portnum,0xFE))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x01))
printf("write byte error.\n");
check = 0xFE;
alt = FALSE;
}
else
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
alt = TRUE;
}
}
}
}
else
{
if(set == 0)
{
if(!alternate)
{
if(!owWriteByte(portnum,0xFD))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x02))
printf("write byte error.\n");
check = 0xFD;
}
else
{
if(alt)
{
if(!owWriteByte(portnum,0xFD))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x02))
printf("write byte error.\n");
check = 0xFD;
alt = FALSE;
}
else
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
alt = TRUE;
}
}
}
else
{
if(!alternate)
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
}
else
{
if(alt)
{
if(!owWriteByte(portnum,0xFD))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x02))
printf("write byte error.\n");
check = 0xFD;
alt = FALSE;
}
else
{
if(!owWriteByte(portnum,0xFF))
printf("write byte error.\n");
if(!owWriteByte(portnum,0x00))
printf("write byte error.\n");
check = 0xFF;
alt = TRUE;
}
}
}
}
send_block[0] = (uchar)owReadByte(portnum);
send_block[1] = (uchar)owReadByte(portnum);
if((send_block[0] != 0xAA) && (send_block[1] != check))
printf("confirmation byte was %02X and read back was %02X\n",
send_block[0],send_block[1]);
}
default:
break;
}
}while(!done);
}
else
printf("DS28E04 not found on One Wire Network\n");
owRelease(portnum);
}
return 1;
}
//---------------------------------------------------------------------------
// The main program that performs the operations on switches
//
int main(int argc, char **argv)
{
short test; //info byte data
short clear=0; //used to clear the button
short done; //to tell when the user is done
SwitchProps sw; //used to set Channel A and B
uchar SwitchSN[MAXDEVICES][8]; //the serial number for the devices
int num; //for the number of devices present
int i,j,n,count,result; //loop counters and indexes
char out[140]; //used for output of the info byte data
int portnum=0;
long select; //inputed number from user
//----------------------------------------
// Introduction header
printf("\n/---------------------------------------------\n");
printf(" Switch - V3.00\n"
" The following is a test to excersize the \n"
" setting of the state in a DS2406.\n");
printf(" Press any CTRL-C to stop this program.\n\n");
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"1\" (Win32 TMEX)\n");
exit(1);
}
// attempt to acquire the 1-Wire Net
if ((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// success
printf("Port opened: %s\n",argv[1]);
// this is to get the number of the devices and the serial numbers
num = FindDevices(portnum, &SwitchSN[0], SWITCH_FAMILY, MAXDEVICES);
// setting up the first print out for the frist device
owSerialNum(portnum, SwitchSN[0], FALSE);
printf("\n");
n=0;
if(owAccess(portnum))
{
// loop while not done
do
{
test = ReadSwitch12(portnum, clear);
for(i=7; i>=0; i--)
printf("%02X", SwitchSN[n][i]);
printf("\n");
count = SwitchStateToString12(test, out);
printf("%s", out);
// print menu
select = 1;
if (!EnterNum("\n\n(1) Display the switch Info\n"
"(2) Clear activity Latches\n"
"(3) Set Flip Flop(s) on switch\n"
"(4) Select different device\n"
"(5) Quit\n"
"Select a Number", 1, &select, 1, 5))
break;
printf("\n\n");
// do something from the menu selection
clear = FALSE;
switch(select)
{
case 1: // Display the switch Info
done = FALSE;
break;
case 2: // Clear activity Latches
clear = TRUE;
done = FALSE;
break;
case 3: // Set Flip Flop(s) on switch
select = 0;
if (EnterNum("Channel A Flip Flop (1 set, 0 clear)",
1, &select, 0, 1))
{
sw.Chan_A = (uchar)select;
if(test & 0x40)
{
if (EnterNum("Channel B Flip Flop (1 set, 0 clear)",
1, &select, 0, 1))
{
sw.Chan_B = (uchar)select;
done = FALSE;
}
}
else
{
sw.Chan_B = 0;
done = FALSE;
}
printf("\n");
}
// proceed to setting switch state if not done
if (!done)
{
// loop to attempt to set the switch (try up to 5 times)
count = 0;
do
{
result = SetSwitch12(portnum, SwitchSN[n], sw);
// if failed then delay to let things settle
if (!result)
msDelay(50);
}
while ((count++ < 5) && (result != TRUE));
// if could not set then show error
if (!result)
printf("Could not set Switch!\n");
}
break;
case 4: // Switch Devices
// print the device list
for(j=0; j < num; j++)
{
printf("%d ", j+1);
for(i=7; i>=0; i--)
{
printf("%02X", SwitchSN[j][i]);
}
printf("\n");
}
printf("\n");
// select the device
select = 0;
if (EnterNum("Select Device",1, &select, 1, num))
{
n = (int)(select - 1);
owSerialNum(portnum, SwitchSN[n], FALSE);
done = FALSE;
}
break;
case 5: // Done
done = TRUE;
break;
default:
break;
}
}
while (!done);
}
//One Wire Access
owRelease(portnum);
printf("Closing port %s.\n", argv[1]);
exit(0);
return 0;
}
//----------------------------------------------------------------------
// Main Test for the DS2450 - 1-Wire Quad A/D Converter
//
int main(int argc, char **argv)
{
char msg[45];
int NumDevices = 0;
int i = 0;
int start_address = 0x8;
int end_address = 0x11;
float prslt[4];
uchar ctrl[16];
int try_overdrive=0;
int portnum=0;
//------------------------------------------------------
// Introduction header
printf("\n/---------------------------------------------\n");
printf(" Channels A to D Application - V2.00\n"
" The following is a test to excersize a\n"
" DS2450 - 1-Wire Quad A/D Converter \n\n");
printf(" Press any CTRL-C to stop this program.\n\n");
printf(" Output [Serial Number(s) ... Channel 'A' Value ... Channel 'B' Value ... \n"
" ... Channel 'C' Value ... Channel 'D' Value] \n\n");
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
// attempt to acquire the 1-Wire Net
if ((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// success
printf("Port opened: %s\n",argv[1]);
// Find the device(s)
NumDevices = FindDevices(portnum, &FamilySN[0], 0x20, MAXDEVICES);
if (NumDevices>0)
{
printf("\n");
printf("Device(s) Found: \n");
for (i = 0; i < NumDevices; i++)
{
PrintSerialNum(FamilySN[i]);
printf("\n");
if (SetupAtoDControl(portnum, FamilySN[i], &ctrl[0], &msg[0]))
{
printf("A/D settings found\n %s\n", msg);
}
else
printf("\n\n\n ERROR, device set up unsuccessful!\n");
if (WriteAtoD(portnum, try_overdrive, FamilySN[i], &ctrl[0], start_address, end_address))
{
printf("\nA/D settings written");
}
else
printf("\n\n\n ERROR, device not found!\n");
}
}
// (stops on CTRL-C)
do
{
// read the current channels
for (i = 0; i < NumDevices; i++)
{
printf("\n\n");
PrintSerialNum(FamilySN[i]);
if (!DoAtoDConversion(portnum, try_overdrive, FamilySN[i]))
{
printf("\nError doing conversion, verify device present: %d\n",
(int)owVerify(portnum,FALSE));
}
if (ReadAtoDResults(portnum, try_overdrive, FamilySN[i], &prslt[0], &ctrl[0]))
{
int c = 0;
for (c = 0; c < 4; c++)
{
printf(" %1.3f ", prslt[c]);
}
}
else
{
printf("\nError reading channel, verify device present: %d\n",
(int)owVerify(portnum,FALSE));
}
}
}
while (!key_abort());
// release the 1-Wire Net
owRelease(portnum);
printf("Closing port %s.\n", argv[1]);
exit(0);
return 0;
}
int main(int argc, char** argv)
{
int i = 0;
SHACopr copr;
SHAUser user;
FileEntry fe = {"COPR",0};
uchar *authSecret;
int authlen;
char test[2] = {'y',0};
long balance;
copr.portnum = 0;
user.portnum = 0;
puts("\nStarting SHA initrov Application\n");
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
if((user.portnum = copr.portnum = owAcquireEx(argv[1])) < 0)
{
printf("Failed to acquire port.\n");
exit(2);
}
#ifdef COPRVM
if(!GetCoprVM(&copr, &fe))
exit(1);
#else
puts("\nPlease place coprocessor token on the 1-Wire bus.\n");
while(!FindCoprSHA(&copr, &fe))
{
if(owHasErrors())
msDelay(10);
}
printf("Found device: ");
PrintSerialNum(copr.devAN);
puts("\n");
#endif
authlen = GetSecret("System Authentication Secret", &authSecret);
EnterString("Reformat the secret for DS1961S compatibility", test, 1, 1);
if(test[0] == 'y')
{
ReformatSecretFor1961S(authSecret, authlen);
PrintHex(authSecret, authlen);
printf("\n");
copr.ds1961Scompatible = 0x55;
}
puts("\nPlease place user token on the 1-Wire bus.\n");
do
{
while(!FindNewSHA(user.portnum, user.devAN, (i==0)))
{
if(owHasErrors())
{
OWERROR_DUMP(stdout);
msDelay(10);
}
}
i++;
}
while(user.devAN[7]==copr.devAN[7]);
// just check the crc of the two devices
balance = 100;
EnterNum("\nInitial Balance in Cents?\n", 5, &balance, 0, 0xFFFFF);
printf("Installing Service Data on device: ");
PrintSerialNum(user.devAN);
puts("\n");
if(InstallServiceData(&copr, &user, authSecret, authlen, (int)balance))
{
puts("User token successfully set up");
}
else
{
puts("User token setup failed");
OWERROR_DUMP(stdout);
}
// and we're done
owRelease(copr.portnum);
// program is about to exit, but we may as well free these
// up anyways...
free(authSecret);
return 0;
}
//----------------------------------------------------------------------
// Main Test for DS1920/DS1820 temperature measurement
//
int main(int argc, char **argv)
{
float current_temp;
int i = 0;
int NumDevices=0;
int portnum = 0;
//----------------------------------------
// Introduction header
printf("\n/---------------------------------------------\n");
// printf(" Temperature application DS1920/DS1820 - Version 1.00 \n"
// " The following is a test to excersize a DS1920/DS1820.\n"
// " Temperature Find and Read from a: \n"
// " DS1920/DS1820 (at least 1)\n\n");
printf(" Press any CTRL-C to stop this program.\n\n");
printf(" Output [Serial Number(s) ........ Temp1(F)] \n\n");
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
// attempt to acquire the 1-Wire Net
if((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// success
printf("Port opened: %s\n",argv[1]);
// Find the device(s)
NumDevices = FindDevices(portnum, &FamilySN[0], 0x10, MAXDEVICES);
if (NumDevices>0)
{
printf("\n");
printf("Device(s) Found: \n");
for (i = 0; i < NumDevices; i++)
{
PrintSerialNum(FamilySN[i]);
printf("\n");
}
printf("\n\n");
// (stops on CTRL-C)
do
{
// read the temperature and print serial number and temperature
for (i = 0; i < NumDevices; i++)
{
if (ReadTemperature(portnum, FamilySN[i],¤t_temp))
{
PrintSerialNum(FamilySN[i]);
// printf(" %5.1f \n", current_temp * 9 / 5 + 32);
printf(" %5.1f \n", current_temp );
// converting temperature from Celsius to Fahrenheit
}
else
printf(" Error reading temperature, verify device present:%d\n",
(int)owVerify(portnum, FALSE));
}
printf("\n");
}
while (!key_abort());
}
else
printf("\n\n\nERROR, device DS1920/DS1820 not found!\n");
// release the 1-Wire Net
owRelease(portnum);
printf("Closing port %s.\n", argv[1]);
exit(0);
return 0;
}
//----------------------------------------------------------------------
// This is the Main routine for thermoms.
//
int main(int argc, char **argv)
{
int Fahrenheit=FALSE,num,i,j;
char str[800];
ThermoStateType ThermoState;
uchar ThermoSN[MAXDEVICES][8]; //the serial numbers for the devices
int portnum=0;
// check arguments to see if request instruction with '?' or too many
if ((argc < 2) || (argc > 3) || ((argc > 1) && (argv[1][0] == '?' || argv[1][1] == '?')))
ExitProg("\nusage: thermoms 1wire_net_name </Fahrenheit>\n"
" - Thermochron configuration on the 1-Wire Net port\n"
" - 1wire_net_port required port name\n"
" example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" \n"
" (Linux DS2480),\"{1,5}\" (Win32 TMEX)\n"
" - </Fahrenheit> optional Fahrenheit mode (default Celsius)\n"
" - version 2.00\n",1);
// attempt to acquire the 1-Wire Net
if((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// success
printf("Port opened: %s\n",argv[1]);
//----------------------------------------
// Introduction
printf("\n/---------------------------------------------\n");
printf(" Find and mission DS1921 Thermochron iButton(s)\n"
" Version 2.00\n\n");
// check arguments
Fahrenheit = FALSE;
if (argc >= 3)
{
if ((argv[2][0] == '/') &&
((argv[2][1] == 'F') || (argv[2][1] == 'f')))
Fahrenheit = TRUE;
}
// get list of Thermochron's
num = FindDevices(portnum, &ThermoSN[0],THERMO_FAM, MAXDEVICES);
// check if not present or more then 1 present
if (num == 0)
ExitProg("Thermochron not present on 1-Wire\n",1);
// loop to mission each Thermochron
for (i = 0; i < num; i++)
{
// set the serial number portion in the thermo state
printf("\nRead status of Thermochron: ");
for (j = 7; j >= 0; j--)
{
ThermoState.MissStat.serial_num[j] = ThermoSN[i][j];
printf("%02X",ThermoSN[i][j]);
}
printf("\n");
// read Thermochron state
if (ReadThermoStatus(portnum,&ThermoSN[i][0],&ThermoState,stdout))
{
// display mission status
InterpretStatus(&ThermoState.MissStat);
MissionStatusToString(&ThermoState.MissStat, Fahrenheit, &str[0]);
printf("\n%s\n",str);
// ask user mission questions
if (!InputMissionType(&ThermoState,Fahrenheit))
{
printf("Input abort\n");
continue;
}
GAMEOVER();
// run the script to display the thermochron
if (MissionThermo(portnum,&ThermoSN[i][0],&ThermoState,stdout))
{
// read Thermochron state
if (ReadThermoStatus(portnum,&ThermoSN[i][0],&ThermoState,stdout))
{
// display the new mission status
InterpretStatus(&ThermoState.MissStat);
MissionStatusToString(&ThermoState.MissStat, Fahrenheit, &str[0]);
printf("\n%s\n",str);
}
else
printf("ERROR reading Thermochon state\n");
}
else
printf("ERROR, Thermochon missioning not complete\n");
}
else
printf("ERROR reading Thermochon state\n");
}
// release the 1-Wire Net
owRelease(portnum);
printf("\nClosing port %s.\n", argv[1]);
printf("End program normally\n");
exit(0);
return 0;
}
//----------------------------------------------------------------------
// Main for tstfind
//
int main(int argc, char **argv)
{
int rslt,cnt;
int portnum=0;
uchar SNum[8];
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
// attempt to acquire the 1-Wire Net
if((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// success
printf("Port opened: %s\n",argv[1]);
//----------------------------------------
// Introduction
printf("\n/---------------------------------------------\n");
printf(" Loop to find all iButton on 1-Wire Net.\n\n");
do
{
printf("-------------------- Start of search\n");
cnt = 0;
// find the first device (all devices not just alarming)
rslt = owFirst(portnum, TRUE, FALSE);
while (rslt)
{
// print the device number
cnt++;
printf("(%d) ",cnt);
// print the Serial Number of the device just found
owSerialNum(portnum,&SNum[0],TRUE);
PrintSerialNum(&SNum[0]);
printf("\n");
// find the next device
rslt = owNext(portnum, TRUE, FALSE);
}
printf("-------------------- End of search\n\n");
}
while (!key_abort());
// release the 1-Wire Net
owRelease(portnum);
printf("Closing port %s.\n", argv[1]);
exit(0);
return 0;
}
int main(int argc, char** argv)
{
FileEntry fe;
int len;
int i;
uchar authSecret[47];
int authlen = 21;
uchar signSecret[11] = {(uchar)'s',(uchar)'i',(uchar)'g',(uchar)'n',
(uchar)' ',(uchar)'s',(uchar)'e',(uchar)'c',
(uchar)'r',(uchar)'e',(uchar)'t'};
int signlen = 11;
int ischars;
SHACopr copr;
SHAUser user;
//could be different ports.
copr.portnum = 0;
user.portnum = 0;
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
if((copr.portnum = owAcquireEx(argv[1])) < 0)
{
printf("Failed to acquire port.\n");
exit(1);
}
user.portnum = copr.portnum;
// MANUALLY SETTING DATA FOR COPROCESSOR
memcpy(copr.serviceFilename, "DLSM", 4);
copr.serviceFilename[4] = (uchar) 102;
copr.signPageNumber = (uchar) 8;
copr.authPageNumber = (uchar) 7;
copr.wspcPageNumber = (uchar) 9;
copr.versionNumber = (uchar) 1;
memcpy(copr.bindCode, "bindcde", 7);
for(i=0;i<8;i++)
{
memcpy(&copr.bindData[i*4], "bind", 4);
}
copr.encCode = 0x01;
copr.ds1961Scompatible = 0x01;
// Prompt for password
printf("Enter up to 47 bytes of the Authentication Secret.\n");
printf(" Data Entry Mode\n");
printf(" (0) Text (single line)\n");
printf(" (1) Hex (XX XX XX XX ...)\n");
len = getData(authSecret,47,getNumber(0,1));
// padd the data with spaces or 0's depending on type
if(len < 47)
{
for(i = len; i < 47; i++)
authSecret[i] = 0x00;
}
ReformatSecretFor1961S(authSecret, authlen);
copr.ds1961Scompatible = 0x55;
InstallAuthSecretVM(&copr, authSecret, authlen);
InstallSignSecretVM(&copr, signSecret, signlen);
puts("\nStarting SHA Software Authentication\n");
puts("\nPlease place token on the 1-Wire bus.\n");
memcpy(fe.Name, "DLSM", 4);
fe.Ext = 102;
for(;;)
{
if(FindUserSA(&user,&fe,FALSE))
{
if(VerifyUser(&copr, &user, TRUE))
{
PrintSerialNum(&user.devAN[0]);
printf(", user data = ");
// print the user data
ischars = TRUE;
for(i=0;i<7;i++)
{
if ((user.accountFile[i+22] < 0x20) ||
(user.accountFile[i+22] > 0x7E))
ischars = FALSE;
}
for(i=0;i<7;i++)
{
if (ischars)
printf("%c", user.accountFile[i+22]);
else
printf("%02X ", user.accountFile[i+22]);
}
printf(", VALID\n");
FindNewSHA(user.portnum, &user.devAN[0], TRUE);
}
else
{
PrintSerialNum(&user.devAN[0]);
printf(", invalid\n");
FindNewSHA(user.portnum, &user.devAN[0], TRUE);
}
}
else
{
printf("NO DEVICE, invalid\n");
FindNewSHA(user.portnum, &user.devAN[0], TRUE);
}
}
owRelease(copr.portnum);
return TRUE;
}
//--------------------------------------------------------------------------
// This is the begining of the program that tests the commands for the
// DS2405
//
int main(int argc, char **argv)
{
uchar SwitchSN[MAXDEVICES][8]; //the serial numbers for the devices
short i,j; //loop counters
int num; //for the number of DS2405s
int lev;
int portnum=0;
// check for required port name
if (argc != 2)
{
printf("1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
exit(1);
}
// attempt to acquire the 1-Wire Net
if((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
exit(1);
}
// this is to get the number of the devices and the serial numbers
num = FindDevices(portnum, &SwitchSN[0], SWITCH_FAMILY, MAXDEVICES);
for( i=0; i<num; i++)
{
if(SetSwitch05(portnum, SwitchSN[i], 1))
{
printf("Device ");
for(j=7; j>=0; j--)
printf("%02X", SwitchSN[i][j]);
printf(" is active\n");
}
else
printf("Error setting device on\n");
if(ReadSwitch05(portnum, SwitchSN[i], &lev))
{
printf("Device ");
for(j=7; j>=0; j--)
printf("%02X", SwitchSN[i][j]);
if(lev)
printf(" is active and is high.\n");
else
printf(" is active and is low.\n");
}
else
printf("Error reading active device\n");
if(SetSwitch05(portnum, SwitchSN[i], 0))
{
printf("Device ");
for(j=7; j>=0; j--)
printf("%02X", SwitchSN[i][j]);
printf(" is not active\n");
}
else
printf("Error setting device off\n");
if(!ReadSwitch05(portnum, SwitchSN[i], &lev))
{
printf("Device ");
for(j=7; j>=0; j--)
printf("%02X", SwitchSN[i][j]);
if(lev)
printf(" is not active and is high.\n");
else
printf(" is not active and is low.\n");
}
else
printf("Error reading nonactive device\n");
}
if(num == 0)
printf("DS2405 not found on the 1-Wire Network.\n");
owRelease(portnum);
printf("Closing port %s.\n", argv[1]);
exit(0);
return 0;
}
int main(int argc, char **argv)
{
int len, addr, page, answer, i;
int done = FALSE;
SMALLINT bank = 1;
uchar data[552];
int portnum = 0;
uchar AllSN[MAXDEVICES][8];
int NumDevices;
int owd;
char msg[132];
// check for required port name
if (argc != 2)
{
sprintf(msg,"1-Wire Net name required on command line!\n"
" (example: \"COM1\" (Win32 DS2480),\"/dev/cua0\" "
"(Linux DS2480),\"{1,5}\" (Win32 TMEX)\n");
printf("%s\n",msg);
return 0;
}
printf("\n1-Wire Memory utility console application Version 0.01\n");
if((portnum = owAcquireEx(argv[1])) < 0)
{
OWERROR_DUMP(stdout);
return 0;
}
else
{
// loop to do menu
do
{
// Main menu
switch (menuSelect(MAIN_MENU,&AllSN[0][0]))
{
case MAIN_SELECT_DEVICE :
// find all parts
// loop to find all of the devices up to MAXDEVICES
NumDevices = 0;
do
{
// perform the search
if (!owNext(portnum,TRUE, FALSE))
break;
owSerialNum(portnum,AllSN[NumDevices], TRUE);
NumDevices++;
}
while (NumDevices < (MAXDEVICES - 1));
/* for test devices without a serial number
if(NumDevices == 0)
{
for(i=0;i<8;i++)
AllSN[0][i] = 0x00;
NumDevices++;
}*/
// select a device
owd = selectDevice(NumDevices,&AllSN[0]);
// display device info
printDeviceInfo(portnum,&AllSN[owd][0]);
// select a bank
bank = selectBank(bank, &AllSN[owd][0]);
if((AllSN[owd][0] == 0x33) || (AllSN[owd][0] == 0xB3))
bank = optionSHAEE(bank,portnum,&AllSN[owd][0]);
// display bank information
displayBankInformation(bank,portnum,&AllSN[owd][0]);
// loop on bank menu
do
{
switch (menuSelect(BANK_MENU,&AllSN[owd][0]))
{
case BANK_INFO :
// display bank information
displayBankInformation(bank,portnum,&AllSN[owd][0]);
break;
case BANK_READ_BLOCK :
// read a block
printf("Enter the address to start reading: ");
addr = getNumber(0, (owGetSize(bank,&AllSN[owd][0])-1));
printf("\n");
printf("Enter the length of data to read: ");
len = getNumber(0, owGetSize(bank, &AllSN[owd][0]));
printf("\n");
if(!dumpBankBlock(bank,portnum,&AllSN[owd][0],addr,len))
OWERROR_DUMP(stderr);
break;
case BANK_READ_PAGE :
printf("Enter the page number to read: ");
page = getNumber(0, (owGetNumberPages(bank,&AllSN[owd][0])-1));
printf("\n");
if(!dumpBankPage(bank,portnum,&AllSN[owd][0],page))
OWERROR_DUMP(stderr);
break;
case BANK_READ_UDP :
printf("Enter the page number to read: ");
page = getNumber(0, (owGetNumberPages(bank,&AllSN[owd][0])-1));
printf("\n");
if(!dumpBankPagePacket(bank,portnum,&AllSN[owd][0],page))
OWERROR_DUMP(stderr);
break;
case BANK_WRITE_BLOCK :
// write a block
printf("Enter the address to start writing: ");
addr = getNumber(0, (owGetSize(bank,&AllSN[owd][0])-1));
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,MAX_LEN,MODE_TEXT);
else
len = getData(data,MAX_LEN,MODE_HEX);
if(!bankWriteBlock(bank,portnum,&AllSN[owd][0],addr,data,len))
{
OWERROR_DUMP(stderr);
break;
}
if(owCanRedirectPage(bank,&AllSN[owd][0]))
{
printf("Enter if you want to redirect page (0 no, 1 yes): ");
answer = getNumber(0,1);
if(answer)
{
printf("What page would you like to redirect:");
page = getNumber(0,255);
printf("Where would you like to redirect:");
addr = getNumber(0,255);
if(!redirectPage(bank,portnum,&AllSN[owd][0],page,addr))
{
OWERROR_DUMP(stderr);
break;
}
}
}
if(owCanLockPage(bank,&AllSN[owd][0]))
{
printf("Enter if you want to lock page (0 no, 1 yes):");
answer = getNumber(0,1);
if(answer)
{
printf("What page would you like to lock?");
page = getNumber(0,255);
if(!lockPage(bank,portnum,&AllSN[owd][0],page))
{
OWERROR_DUMP(stderr);
break;
}
}
}
if(owCanLockRedirectPage(bank,&AllSN[owd][0]))
{
printf("Enter if you want to lock redirected page (0 no, 1 yes):");
answer = getNumber(0,1);
if(answer)
{
printf("Which redirected page do you want to lock:");
page = getNumber(0,255);
if(!lockRedirectPage(bank,portnum,&AllSN[owd][0],page))
{
OWERROR_DUMP(stderr);
break;
}
}
}
break;
case BANK_WRITE_UDP :
printf("Enter the page number to write a UDP to: ");
page = getNumber(0, (owGetNumberPages(bank,&AllSN[owd][0])-1));
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,MAX_LEN,MODE_TEXT);
else
len = getData(data,MAX_LEN,MODE_HEX);
if(!bankWritePacket(bank,portnum,&AllSN[owd][0],page,data,len))
OWERROR_DUMP(stderr);
break;
case BANK_BM_READ_PASS:
printf("Enter the 8 byte read only password if less 0x00 will be filled in.");
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,8,MODE_TEXT);
else
len = getData(data,8,MODE_HEX);
if(len != 8)
{
for(i=len;i<8;i++)
data[i] = 0x00;
}
if(!owSetBMReadOnlyPassword(portnum,&AllSN[owd][0],data))
OWERROR_DUMP(stderr);
break;
case BANK_BM_RW_PASS:
printf("Enter the 8 byte read/write password if less 0x00 will be filled in.");
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,8,MODE_TEXT);
else
len = getData(data,8,MODE_HEX);
if(len != 8)
{
for(i=len;i<8;i++)
data[i] = 0x00;
}
if(!owSetBMReadWritePassword(portnum,&AllSN[owd][0],data))
OWERROR_DUMP(stderr);
break;
case BANK_READ_PASS:
printf("Enter the 8 byte read only password if less 0x00 will be filled in.");
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,8,MODE_TEXT);
else
len = getData(data,8,MODE_HEX);
if(len != 8)
{
for(i=len;i<8;i++)
data[i] = 0x00;
}
if(!owSetReadOnlyPassword(portnum,&AllSN[owd][0],data))
OWERROR_DUMP(stderr);
break;
case BANK_RW_PASS:
printf("Enter the 8 byte read/write password if less 0x00 will be filled in.");
if(menuSelect(ENTRY_MENU,&AllSN[owd][0]) == MODE_TEXT)
len = getData(data,8,MODE_TEXT);
else
len = getData(data,8,MODE_HEX);
if(len != 8)
{
for(i=len;i<8;i++)
data[i] = 0x00;
}
if(!owSetReadWritePassword(portnum,&AllSN[owd][0],data))
OWERROR_DUMP(stderr);
break;
case BANK_ENABLE_PASS:
if(!owSetPasswordMode(portnum,&AllSN[owd][0],ENABLE_PSW))
OWERROR_DUMP(stderr);
break;
case BANK_DISABLE_PASS:
if(!owSetPasswordMode(portnum,&AllSN[owd][0],DISABLE_PSW))
OWERROR_DUMP(stderr);
break;
case BANK_NEW_BANK :
// select a bank
bank = selectBank(bank,&AllSN[owd][0]);
if((AllSN[owd][0] == 0x33) || (AllSN[owd][0] == 0xB3))
bank = optionSHAEE(bank,portnum,&AllSN[owd][0]);
// display bank information
displayBankInformation(bank,portnum,&AllSN[owd][0]);
break;
case BANK_MAIN_MENU :
done = TRUE;
break;
}
}
while (!done);
done = FALSE;
break;
case MAIN_QUIT :
done = TRUE;
break;
} // Main menu switch
}
while (!done); // loop to do menu
owRelease(portnum);
} // else for owAcquire
return 1;
}
