static bool ChangePlaintextPasswordUsingLibPam(const char *puser, const char *password)
{
int status;
pam_handle_t *handle;
struct pam_conv conv;
conv.conv = PasswordSupplier;
conv.appdata_ptr = (void*)password;
status = pam_start("passwd", puser, &conv, &handle);
if (status != PAM_SUCCESS)
{
Log(LOG_LEVEL_ERR, "Could not initialize pam session. (pam_start: '%s')", pam_strerror(NULL, status));
return false;
}
Log(LOG_LEVEL_VERBOSE, "Changing password for user '%s'.", puser);
status = pam_chauthtok(handle, PAM_SILENT);
pam_end(handle, status);
if (status == PAM_SUCCESS)
{
return true;
}
else
{
Log(LOG_LEVEL_ERR, "Could not change password for user '%s'. (pam_chauthtok: '%s')",
puser, pam_strerror(handle, status));
return false;
}
}
static enum pamtest_err run_test_case(pam_handle_t *ph,
struct pam_testcase *tc)
{
switch (tc->pam_operation) {
case PAMTEST_AUTHENTICATE:
tc->op_rv = pam_authenticate(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_SETCRED:
tc->op_rv = pam_setcred(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_ACCOUNT:
tc->op_rv = pam_acct_mgmt(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_OPEN_SESSION:
tc->op_rv = pam_open_session(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_CLOSE_SESSION:
tc->op_rv = pam_close_session(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_CHAUTHTOK:
tc->op_rv = pam_chauthtok(ph, tc->flags);
return PAMTEST_ERR_OK;
case PAMTEST_GETENVLIST:
tc->case_out.envlist = pam_getenvlist(ph);
return PAMTEST_ERR_OK;
case PAMTEST_KEEPHANDLE:
tc->case_out.ph = ph;
return PAMTEST_ERR_KEEPHANDLE;
default:
return PAMTEST_ERR_OP;
}
return PAMTEST_ERR_OP;
}
bool PamHandle::chAuthTok(int flags) {
m_result = pam_chauthtok(m_handle, flags | m_silent);
if (m_result != PAM_SUCCESS) {
qWarning() << "[PAM] chAuthTok:" << pam_strerror(m_handle, m_result);
}
return m_result == PAM_SUCCESS;
}
static void loginpam_acct(struct login_context *cxt)
{
int rc;
pam_handle_t *pamh = cxt->pamh;
rc = pam_acct_mgmt(pamh, 0);
if (rc == PAM_NEW_AUTHTOK_REQD)
rc = pam_chauthtok(pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
if (is_pam_failure(rc))
loginpam_err(pamh, rc);
/*
* Grab the user information out of the password file for future use.
* First get the username that we are actually using, though.
*/
rc = loginpam_get_username(pamh, &cxt->username);
if (is_pam_failure(rc))
loginpam_err(pamh, rc);
if (!cxt->username || !*cxt->username) {
warnx(_("\nSession setup problem, abort."));
syslog(LOG_ERR, _("NULL user name in %s:%d. Abort."),
__FUNCTION__, __LINE__);
pam_end(pamh, PAM_SYSTEM_ERR);
sleepexit(EXIT_FAILURE);
}
}
void
do_pam_passwd(const char *user, int silent, int change_expired)
{
pam_handle_t *pamh = NULL;
int flags = 0, ret;
if (silent)
flags |= PAM_SILENT;
if (change_expired)
flags |= PAM_CHANGE_EXPIRED_AUTHTOK;
ret = pam_start("passwd", user, &conv, &pamh);
if (ret != PAM_SUCCESS) {
fprintf(stderr, _("passwd: pam_start() failed, error %d\n"),
ret);
exit(10); /* XXX */
}
ret = pam_chauthtok(pamh, flags);
if (ret != PAM_SUCCESS) {
fprintf(stderr, _("passwd: %s\n"), PAM_STRERROR(pamh, ret));
pam_end(pamh, ret);
exit(10); /* XXX */
}
pam_end(pamh, PAM_SUCCESS);
}
int
sudo_pam_verify(struct passwd *pw, char *prompt, sudo_auth *auth)
{
const char *s;
int *pam_status = (int *) auth->data;
debug_decl(sudo_pam_verify, SUDO_DEBUG_AUTH)
def_prompt = prompt; /* for converse */
/* PAM_SILENT prevents the authentication service from generating output. */
*pam_status = pam_authenticate(pamh, PAM_SILENT);
switch (*pam_status) {
case PAM_SUCCESS:
*pam_status = pam_acct_mgmt(pamh, PAM_SILENT);
switch (*pam_status) {
case PAM_SUCCESS:
debug_return_int(AUTH_SUCCESS);
case PAM_AUTH_ERR:
log_warning(NO_MAIL, N_("account validation failure, "
"is your account locked?"));
debug_return_int(AUTH_FATAL);
case PAM_NEW_AUTHTOK_REQD:
log_warning(NO_MAIL, N_("Account or password is "
"expired, reset your password and try again"));
*pam_status = pam_chauthtok(pamh,
PAM_CHANGE_EXPIRED_AUTHTOK);
if (*pam_status == PAM_SUCCESS)
debug_return_int(AUTH_SUCCESS);
if ((s = pam_strerror(pamh, *pam_status)) != NULL) {
log_warning(NO_MAIL,
N_("unable to change expired password: %s"), s);
}
debug_return_int(AUTH_FAILURE);
case PAM_AUTHTOK_EXPIRED:
log_warning(NO_MAIL,
N_("Password expired, contact your system administrator"));
debug_return_int(AUTH_FATAL);
case PAM_ACCT_EXPIRED:
log_warning(NO_MAIL,
N_("Account expired or PAM config lacks an \"account\" "
"section for sudo, contact your system administrator"));
debug_return_int(AUTH_FATAL);
}
/* FALLTHROUGH */
case PAM_AUTH_ERR:
case PAM_AUTHINFO_UNAVAIL:
if (getpass_error) {
/* error or ^C from tgetpass() */
debug_return_int(AUTH_INTR);
}
/* FALLTHROUGH */
case PAM_MAXTRIES:
case PAM_PERM_DENIED:
debug_return_int(AUTH_FAILURE);
default:
if ((s = pam_strerror(pamh, *pam_status)) != NULL)
log_warning(NO_MAIL, N_("PAM authentication error: %s"), s);
debug_return_int(AUTH_FATAL);
}
}
bool PAMAuthenticator::authenticate(void)
{
pam_conv c;
c.conv = PAMAuthenticator::conv;
c.appdata_ptr = this;
int res = pam_start("repwatchproxy", 0, &c, &this->m_ph);
if (res == PAM_SUCCESS) {
res = pam_set_item(this->m_ph, PAM_RUSER, this->m_user.constData());
if (res != PAM_SUCCESS) {
goto getout;
}
res = pam_set_item(this->m_ph, PAM_RHOST, this->m_host.constData());
if (res != PAM_SUCCESS) {
goto getout;
}
res = pam_authenticate(this->m_ph, 0);
if (res != PAM_SUCCESS) {
goto getout;
}
res = pam_acct_mgmt(this->m_ph, 0);
if (PAM_NEW_AUTHTOK_REQD == res) {
res = pam_chauthtok(this->m_ph, PAM_CHANGE_EXPIRED_AUTHTOK);
}
if (res != PAM_SUCCESS) {
goto getout;
}
res = pam_setcred(this->m_ph, PAM_ESTABLISH_CRED);
if (res != PAM_SUCCESS) {
goto getout;
}
res = pam_open_session(this->m_ph, 0);
if (res != PAM_SUCCESS) {
goto getout;
}
return true;
getout:
qWarning("%s: %s", Q_FUNC_INFO, pam_strerror(this->m_ph, res));
pam_end(this->m_ph, res);
}
else {
qCritical("PAM initialization failed");
}
this->m_ph = 0;
return false;
}
int
pam_verify(struct passwd *pw, char *prompt, sudo_auth *auth)
{
const char *s;
int *pam_status = (int *) auth->data;
def_prompt = prompt; /* for converse */
/* PAM_SILENT prevents the authentication service from generating output. */
*pam_status = pam_authenticate(pamh, PAM_SILENT);
switch (*pam_status) {
case PAM_SUCCESS:
*pam_status = pam_acct_mgmt(pamh, PAM_SILENT);
switch (*pam_status) {
case PAM_SUCCESS:
return AUTH_SUCCESS;
case PAM_AUTH_ERR:
log_error(NO_EXIT|NO_MAIL, _("account validation failure, "
"is your account locked?"));
return AUTH_FATAL;
case PAM_NEW_AUTHTOK_REQD:
log_error(NO_EXIT|NO_MAIL, _("Account or password is "
"expired, reset your password and try again"));
*pam_status = pam_chauthtok(pamh,
PAM_CHANGE_EXPIRED_AUTHTOK);
if (*pam_status == PAM_SUCCESS)
return AUTH_SUCCESS;
if ((s = pam_strerror(pamh, *pam_status)))
log_error(NO_EXIT|NO_MAIL, _("pam_chauthtok: %s"), s);
return AUTH_FAILURE;
case PAM_AUTHTOK_EXPIRED:
log_error(NO_EXIT|NO_MAIL,
_("Password expired, contact your system administrator"));
return AUTH_FATAL;
case PAM_ACCT_EXPIRED:
log_error(NO_EXIT|NO_MAIL,
_("Account expired or PAM config lacks an \"account\" "
"section for sudo, contact your system administrator"));
return AUTH_FATAL;
}
/* FALLTHROUGH */
case PAM_AUTH_ERR:
if (gotintr) {
/* error or ^C from tgetpass() */
return AUTH_INTR;
}
case PAM_MAXTRIES:
case PAM_PERM_DENIED:
return AUTH_FAILURE;
default:
if ((s = pam_strerror(pamh, *pam_status)))
log_error(NO_EXIT|NO_MAIL, _("pam_authenticate: %s"), s);
return AUTH_FATAL;
}
}
int main(int argc, char *argv[])
{
pam_handle_t *pamh=NULL;
int retval;
const char *user="******";
if(argc == 2) {
user = argv[1];
}
if(argc > 2) {
fprintf(stderr, "Usage: check_user [username]\n");
exit(1);
}
retval = pam_start("sqlite3", user, &conv, &pamh);
if(retval == PAM_SUCCESS)
printf("PAM started.\n");
if (retval == PAM_SUCCESS)
retval = pam_authenticate(pamh, 0); /* is user really user? */
if(retval == PAM_SUCCESS)
printf("Authentication succeeded, checking access.\n");
else
printf("Authentication failed: %s\n", pam_strerror(pamh, retval));
if (retval == PAM_SUCCESS)
retval = pam_acct_mgmt(pamh, 0); /* permitted access? */
if(retval == PAM_SUCCESS)
printf("Access permitted.\n");
else
printf("Access denied: %s\n", pam_strerror(pamh, retval));
/* lets try print password */
printf("Changing authentication token...\n");
retval = pam_chauthtok(pamh, 0);
if(retval != PAM_SUCCESS) {
printf("Failed: %s\n", pam_strerror(pamh, retval));
} else {
printf("Token changed.\n");
}
/* This is where we have been authorized or not. */
if (pam_end(pamh,retval) != PAM_SUCCESS) { /* close Linux-PAM */
pamh = NULL;
fprintf(stderr, "check_user: failed to release authenticator\n");
exit(1);
}
return ( retval == PAM_SUCCESS ? 0:1 ); /* indicate success */
}
static int
sshpam_chauthtok_ruid(pam_handle_t *pamh, int flags)
{
int result;
if (sshpam_authctxt == NULL)
fatal("PAM: sshpam_authctxt not initialized");
if (setreuid(sshpam_authctxt->pw->pw_uid, -1) == -1)
fatal("%s: setreuid failed: %s", __func__, strerror(errno));
result = pam_chauthtok(pamh, flags);
if (setreuid(0, -1) == -1)
fatal("%s: setreuid failed: %s", __func__, strerror(errno));
return result;
}
static void
pm_do_auth(adt_session_data_t *ah)
{
pam_handle_t *pm_pamh;
int err;
int pam_flag = 0;
int chpasswd_tries;
struct pam_conv pam_conv = {pam_tty_conv, NULL};
if (user[0] == '\0')
return;
if ((err = pam_start("sys-suspend", user, &pam_conv,
&pm_pamh)) != PAM_SUCCESS)
return;
pam_flag = PAM_DISALLOW_NULL_AUTHTOK;
do {
err = pam_authenticate(pm_pamh, pam_flag);
if (err == PAM_SUCCESS) {
err = pam_acct_mgmt(pm_pamh, pam_flag);
if (err == PAM_NEW_AUTHTOK_REQD) {
chpasswd_tries = 0;
do {
err = pam_chauthtok(pm_pamh,
PAM_CHANGE_EXPIRED_AUTHTOK);
chpasswd_tries++;
} while ((err == PAM_AUTHTOK_ERR ||
err == PAM_TRY_AGAIN) &&
chpasswd_tries < DEF_ATTEMPTS);
pm_audit_event(ah, ADT_passwd, err);
}
err = pam_setcred(pm_pamh, PAM_REFRESH_CRED);
}
if (err != PAM_SUCCESS) {
(void) fprintf(stdout, "%s\n",
pam_strerror(pm_pamh, err));
pm_audit_event(ah, ADT_screenunlock, err);
}
} while (err != PAM_SUCCESS);
pm_audit_event(ah, ADT_passwd, 0);
(void) pam_end(pm_pamh, err);
}
int main(int argc, char **argv) {
pam_handle_t *pamh=NULL;
static struct pam_conv pamc = {
misc_conv,
NULL
};
if( PAM_SUCCESS != pam_start("test", "testa", &pamc, &pamh) )
{
fprintf(stderr, "ERR: pam_start failed!\n");
return 1;
}
/*
if( PAM_SUCCESS != pam_set_item(pamh, PAM_USER, "tester") )
{
fprintf(stderr, "ERR: pam_set_item user failed!\n");
return 1;
}
if( PAM_SUCCESS != pam_chauthtok(pamh, 0) )
{
fprintf(stderr, "ERR: pam_chauthtok failed!\n");
return 1;
}
if( PAM_SUCCESS != pam_set_item(pamh, PAM_AUTHTOK, "mypassword") )
{
fprintf(stderr, "ERR: pam_set_item password failed!\n");
return 1;
}
*/
if( PAM_SUCCESS != pam_chauthtok(pamh, 0) )
{
fprintf(stderr, "ERR: pam_chauthtok failed!\n");
return 1;
}
if( PAM_SUCCESS != pam_end(pamh, PAM_SUCCESS) )
{
fprintf(stderr, "ERR: pam_end failed!\n");
return 1;
}
return 0;
}
/*
* XXX this should be done in the authentication phase, but ssh1 doesn't
* support that
*/
void
do_pam_chauthtok(void)
{
if (use_privsep)
fatal("Password expired (unable to change with privsep)");
sshpam_err = pam_set_item(sshpam_handle, PAM_CONV,
(const void *)&tty_conv);
if (sshpam_err != PAM_SUCCESS)
fatal("PAM: failed to set PAM_CONV: %s",
pam_strerror(sshpam_handle, sshpam_err));
debug("PAM: changing password");
sshpam_err = pam_chauthtok(sshpam_handle, PAM_CHANGE_EXPIRED_AUTHTOK);
if (sshpam_err != PAM_SUCCESS)
fatal("PAM: pam_chauthtok(): %s",
pam_strerror(sshpam_handle, sshpam_err));
}
int main(int argc, char *argv[])
{
pam_handle_t *pamh = NULL;
int retval;
struct pam_conv conv = { gradm_pam_conv, NULL };
struct gr_arg_wrapper wrapper;
struct gr_arg arg;
int fd;
if (argc != 2)
exit(EXIT_FAILURE);
wrapper.version = GRADM_VERSION;
wrapper.size = sizeof(struct gr_arg);
wrapper.arg = &arg;
arg.mode = GRADM_STATUS;
if ((fd = open(GRDEV_PATH, O_WRONLY)) < 0) {
fprintf(stderr, "Could not open %s.\n", GRDEV_PATH);
failure("open");
}
retval = write(fd, &wrapper, sizeof(struct gr_arg_wrapper));
close(fd);
if (retval != 1)
exit(EXIT_FAILURE);
retval = pam_start(PAM_SERVICENAME, argv[1], &conv, &pamh);
if (retval == PAM_SUCCESS)
retval = pam_authenticate(pamh, 0);
if (retval == PAM_SUCCESS)
retval = pam_acct_mgmt(pamh, 0);
if (retval == PAM_AUTHTOK_EXPIRED)
retval = pam_chauthtok(pamh, 0);
if (pamh)
pam_end(pamh, retval);
if (retval != PAM_SUCCESS)
exit(EXIT_FAILURE);
return EXIT_SUCCESS;
}
static int
do_account_password_management(pam_handle_t *pamh)
{
int rc;
/* Whether the authenticated user is allowed to log in? */
rc = pam_acct_mgmt(pamh, 0);
/* Do we need to prompt the user for a new password? */
if (rc == PAM_NEW_AUTHTOK_REQD)
rc = pam_chauthtok(pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
/* Extend the lifetime of the existing credentials. */
if (rc == PAM_SUCCESS)
rc = pam_setcred(pamh, PAM_REFRESH_CRED);
return rc;
}
static void co_auth_user(void* data)
{
struct pam_ctx_st * pctx = data;
int pret;
pctx->state = PAM_S_INIT;
pret = pam_authenticate(pctx->ph, 0);
if (pret != PAM_SUCCESS) {
syslog(LOG_INFO, "PAM authenticate error: %s", pam_strerror(pctx->ph, pret));
pctx->cr_ret = pret;
goto wait;
}
pret = pam_acct_mgmt(pctx->ph, 0);
if (pret == PAM_NEW_AUTHTOK_REQD) {
/* change password */
syslog(LOG_INFO, "Password for user '%s' is expired. Attempting to update...", pctx->username);
pctx->changing = 1;
pret = pam_chauthtok(pctx->ph, PAM_CHANGE_EXPIRED_AUTHTOK);
}
if (pret != PAM_SUCCESS) {
syslog(LOG_INFO, "PAM acct-mgmt error: %s", pam_strerror(pctx->ph, pret));
pctx->cr_ret = pret;
goto wait;
}
pctx->state = PAM_S_COMPLETE;
pctx->cr_ret = PAM_SUCCESS;
wait:
while(1) {
co_resume();
}
}
/*
* Attempt to authenticate the user using PAM. Returns 0 if the user is
* authenticated, or 1 if not authenticated. If some sort of PAM system
* error occurs (e.g., the "/etc/pam.conf" file is missing) then this
* function returns -1. This can be used as an indication that we should
* fall back to a different authentication mechanism.
*/
static int
auth_pam(void)
{
const char *tmpl_user;
const void *item;
int rval;
pam_err = pam_authenticate(pamh, pam_silent);
switch (pam_err) {
case PAM_SUCCESS:
/*
* With PAM we support the concept of a "template"
* user. The user enters a login name which is
* authenticated by PAM, usually via a remote service
* such as RADIUS or TACACS+. If authentication
* succeeds, a different but related "template" name
* is used for setting the credentials, shell, and
* home directory. The name the user enters need only
* exist on the remote authentication server, but the
* template name must be present in the local password
* database.
*
* This is supported by two various mechanisms in the
* individual modules. However, from the application's
* point of view, the template user is always passed
* back as a changed value of the PAM_USER item.
*/
pam_err = pam_get_item(pamh, PAM_USER, &item);
if (pam_err == PAM_SUCCESS) {
tmpl_user = (const char *)item;
if (strcmp(username, tmpl_user) != 0)
pwd = getpwnam(tmpl_user);
} else {
pam_syslog("pam_get_item(PAM_USER)");
}
rval = 0;
break;
case PAM_AUTH_ERR:
case PAM_USER_UNKNOWN:
case PAM_MAXTRIES:
rval = 1;
break;
default:
pam_syslog("pam_authenticate()");
rval = -1;
break;
}
if (rval == 0) {
pam_err = pam_acct_mgmt(pamh, pam_silent);
switch (pam_err) {
case PAM_SUCCESS:
break;
case PAM_NEW_AUTHTOK_REQD:
pam_err = pam_chauthtok(pamh,
pam_silent|PAM_CHANGE_EXPIRED_AUTHTOK);
if (pam_err != PAM_SUCCESS) {
pam_syslog("pam_chauthtok()");
rval = 1;
}
break;
default:
pam_syslog("pam_acct_mgmt()");
rval = 1;
break;
}
}
if (rval != 0) {
pam_end(pamh, pam_err);
pamh = NULL;
}
return (rval);
}
static void
authenticate (const struct passwd* pw) {
const struct passwd* lpw = NULL;
const char* cp, *srvname = NULL;
int retval;
switch (su_mode) {
case SU_MODE:
srvname = simulate_login ? PAM_SRVNAME_SU_L : PAM_SRVNAME_SU;
break;
case RUNUSER_MODE:
srvname = simulate_login ? PAM_SRVNAME_RUNUSER_L : PAM_SRVNAME_RUNUSER;
break;
default:
abort();
break;
}
retval = pam_start (srvname, pw->pw_name, &conv, &pamh);
if (is_pam_failure(retval)) {
goto done;
}
if (isatty (0) && (cp = ttyname (0)) != NULL) {
const char* tty;
if (strncmp (cp, "/dev/", 5) == 0) {
tty = cp + 5;
} else {
tty = cp;
}
retval = pam_set_item (pamh, PAM_TTY, tty);
if (is_pam_failure(retval)) {
goto done;
}
}
lpw = current_getpwuid ();
if (lpw && lpw->pw_name) {
retval = pam_set_item (pamh, PAM_RUSER, (const void*) lpw->pw_name);
if (is_pam_failure(retval)) {
goto done;
}
}
if (su_mode == RUNUSER_MODE) {
/*
* This is the only difference between runuser(1) and su(1). The command
* runuser(1) does not required authentication, because user is root.
*/
if (restricted) {
errx(EXIT_FAILURE, _("may not be used by non-root users"));
}
return;
}
retval = pam_authenticate (pamh, 0);
if (is_pam_failure(retval)) {
goto done;
}
retval = pam_acct_mgmt (pamh, 0);
if (retval == PAM_NEW_AUTHTOK_REQD) {
/* Password has expired. Offer option to change it. */
retval = pam_chauthtok (pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
}
done:
log_syslog(pw, !is_pam_failure(retval));
if (is_pam_failure(retval)) {
const char* msg;
log_btmp(pw);
msg = pam_strerror(pamh, retval);
pam_end(pamh, retval);
sleep (getlogindefs_num ("FAIL_DELAY", 1));
errx (EXIT_FAILURE, "%s", msg ? msg : _("incorrect password"));
}
}
int main(int argc, char **argv) {
struct sockaddr_storage peer_sa;
struct sockaddr *peer = (struct sockaddr *)&peer_sa;
int peerlen = sizeof(peer_sa);
char user[1024];
char luser[1024];
char term[1024];
int port;
struct passwd *pw;
int err;
char opt;
char host[NI_MAXHOST];
char buf[4096];
int len;
struct pollfd pfd[3];
struct winsize winsize;
uint16_t winbuf[4];
int i;
int master, slave;
char *tty;
pam_handle_t *handle;
struct pam_conv conv = {conv_h, NULL};
const void *item;
char *pamuser;
int pid;
argv0 = argv[0];
/* Process options */
while((opt = getopt(argc, argv, "+")) != -1) {
switch(opt) {
default:
syslog(LOG_ERR, "Unknown option!");
usage();
return 1;
}
}
if(optind != argc) {
syslog(LOG_ERR, "Too many arguments!");
usage();
return 1;
}
/* Check source of connection */
if(getpeername(0, peer, &peerlen)) {
syslog(LOG_ERR, "Can't get address of peer: %m");
return 1;
}
/* Unmap V4MAPPED addresses */
if(peer->sa_family == AF_INET6 && IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)peer)->sin6_addr)) {
((struct sockaddr_in *)peer)->sin_addr.s_addr = ((struct sockaddr_in6 *)peer)->sin6_addr.s6_addr32[3];
peer->sa_family = AF_INET;
}
/* Lookup hostname */
if((err = getnameinfo(peer, peerlen, host, sizeof(host), NULL, 0, 0))) {
syslog(LOG_ERR, "Error resolving address: %s", gai_strerror(err));
return 1;
}
/* Check if connection comes from a privileged port */
switch(peer->sa_family) {
case AF_INET:
port = ntohs(((struct sockaddr_in *)peer)->sin_port);
break;
case AF_INET6:
port = ntohs(((struct sockaddr_in6 *)peer)->sin6_port);
break;
default:
port = -1;
break;
}
if(port != -1 && (port < 512 || port >= 1024)) {
syslog(LOG_ERR, "Connection from %s on illegal port %d.", host, port);
return 1;
}
/* Wait for NULL byte */
if(read(0, buf, 1) != 1 || *buf) {
syslog(LOG_ERR, "Didn't receive NULL byte from %s: %m\n", host);
return 1;
}
/* Read usernames and terminal info */
if(readtonull(0, user, sizeof(user)) <= 0 || readtonull(0, luser, sizeof(luser)) <= 0) {
syslog(LOG_ERR, "Error while receiving usernames from %s: %m", host);
return 1;
}
if(readtonull(0, term, sizeof(term)) <= 0) {
syslog(LOG_ERR, "Error while receiving terminal from %s: %m", host);
return 1;
}
syslog(LOG_NOTICE, "Connection from %s@%s for %s", user, host, luser);
/* We need to have a pty before we can use PAM */
if(openpty(&master, &slave, 0, 0, &winsize) != 0) {
syslog(LOG_ERR, "Could not open pty: %m");
return 1;
}
tty = ttyname(slave);
/* Start PAM */
if((err = pam_start("rlogin", luser, &conv, &handle)) != PAM_SUCCESS) {
safewrite(1, "Authentication failure\n", 23);
syslog(LOG_ERR, "PAM error: %s", pam_strerror(handle, err));
return 1;
}
pam_set_item(handle, PAM_USER, luser);
pam_set_item(handle, PAM_RUSER, user);
pam_set_item(handle, PAM_RHOST, host);
pam_set_item(handle, PAM_TTY, tty);
/* Write NULL byte to client so we can give a login prompt if necessary */
if(safewrite(1, "", 1) == -1) {
syslog(LOG_ERR, "Unable to write NULL byte: %m");
return 1;
}
/* Try to authenticate */
err = pam_authenticate(handle, 0);
/* PAM might ask for a new password */
if(err == PAM_NEW_AUTHTOK_REQD) {
err = pam_chauthtok(handle, PAM_CHANGE_EXPIRED_AUTHTOK);
if(err == PAM_SUCCESS)
err = pam_authenticate(handle, 0);
}
if(err != PAM_SUCCESS) {
safewrite(1, "Authentication failure\n", 23);
syslog(LOG_ERR, "PAM error: %s", pam_strerror(handle, err));
return 1;
}
/* Check account */
err = pam_acct_mgmt(handle, 0);
if(err != PAM_SUCCESS) {
safewrite(1, "Authentication failure\n", 23);
syslog(LOG_ERR, "PAM error: %s", pam_strerror(handle, err));
return 1;
}
/* PAM can map the user to a different user */
err = pam_get_item(handle, PAM_USER, &item);
if(err != PAM_SUCCESS) {
syslog(LOG_ERR, "PAM error: %s", pam_strerror(handle, err));
return 1;
}
pamuser = strdup((char *)item);
if(!pamuser || !*pamuser) {
syslog(LOG_ERR, "PAM didn't return a username?!");
return 1;
}
pw = getpwnam(pamuser);
if (!pw) {
syslog(LOG_ERR, "PAM_USER does not exist?!");
return 1;
}
if (setgid(pw->pw_gid)) {
syslog(LOG_ERR, "setgid() failed: %m");
return 1;
}
if (initgroups(pamuser, pw->pw_gid)) {
syslog(LOG_ERR, "initgroups() failed: %m");
return 1;
}
err = pam_setcred(handle, PAM_ESTABLISH_CRED);
if(err != PAM_SUCCESS) {
syslog(LOG_ERR, "PAM error: %s", pam_strerror(handle, err));
return 1;
}
/* Authentication succeeded */
pam_end(handle, PAM_SUCCESS);
/* spawn login shell */
if((pid = fork()) < 0) {
syslog(LOG_ERR, "fork() failed: %m");
return 1;
}
if(send(1, "\x80", 1, MSG_OOB) <= 0) {
syslog(LOG_ERR, "Unable to write OOB \x80: %m");
return 1;
}
if(pid) {
/* Parent process, still the rlogin server */
close(slave);
/* Process input/output */
pfd[0].fd = 0;
pfd[0].events = POLLIN | POLLERR | POLLHUP;
pfd[1].fd = master;
pfd[1].events = POLLIN | POLLERR | POLLHUP;
for(;;) {
errno = 0;
if(poll(pfd, 2, -1) == -1) {
if(errno == EINTR)
continue;
break;
}
if(pfd[0].revents) {
len = read(0, buf, sizeof(buf));
if(len <= 0)
break;
/* Scan for control messages. Yes this is evil and should be done differently. */
for(i = 0; i < len - 11;) {
if(buf[i++] == (char)0xFF)
if(buf[i++] == (char)0xFF)
if(buf[i++] == 's')
if(buf[i++] == 's') {
memcpy(winbuf, buf + i, 8);
winsize.ws_row = ntohs(winbuf[0]);
winsize.ws_col = ntohs(winbuf[1]);
winsize.ws_xpixel = ntohs(winbuf[2]);
winsize.ws_ypixel = ntohs(winbuf[3]);
if(ioctl(master, TIOCSWINSZ, &winsize) == -1)
break;
memcpy(buf + i - 4, buf + i + 8, len - i - 8);
i -= 4;
len -= 12;
}
}
if(safewrite(master, buf, len) == -1)
break;
pfd[0].revents = 0;
}
if(pfd[1].revents) {
len = read(master, buf, sizeof(buf));
if(len <= 0) {
errno = 0;
break;
}
if(safewrite(1, buf, len) == -1)
break;
pfd[1].revents = 0;
}
}
/* The end */
if(errno) {
syslog(LOG_NOTICE, "Closing connection with %s@%s: %m", user, host);
return 1;
} else {
syslog(LOG_NOTICE, "Closing connection with %s@%s", user, host);
return 0;
}
close(master);
} else {
/* Child process, will become the shell */
char *speed;
struct termios tios;
char *envp[2];
/* Prepare tty for login */
close(master);
if(login_tty(slave)) {
syslog(LOG_ERR, "login_tty() failed: %m");
return 1;
}
/* Fix terminal type and speed */
tcgetattr(0, &tios);
if((speed = strchr(term, '/'))) {
*speed++ = '\0';
cfsetispeed(&tios, atoi(speed));
cfsetospeed(&tios, atoi(speed));
}
tcsetattr(0, TCSADRAIN, &tios);
/* Create environment */
asprintf(&envp[0], "TERM=%s", term);
envp[1] = NULL;
/* Spawn login process */
execle("/bin/login", "login", "-p", "-h", host, "-f", pamuser, NULL, envp);
syslog(LOG_ERR, "Failed to spawn login process: %m");
return 1;
}
}
int main (int argc, char **argv)
{
#ifdef USE_PAM
pam_handle_t *pamh = NULL;
struct passwd *pampw;
int retval;
#endif
/*
* Get my name so that I can use it to report errors.
*/
Prog = Basename (argv[0]);
setlocale (LC_ALL, "");
bindtextdomain (PACKAGE, LOCALEDIR);
textdomain (PACKAGE);
#ifdef USE_PAM
retval = PAM_SUCCESS;
pampw = getpwuid (getuid ());
if (pampw == NULL) {
retval = PAM_USER_UNKNOWN;
}
if (retval == PAM_SUCCESS) {
retval =
pam_start ("shadow", pampw->pw_name, &conv, &pamh);
}
if (retval == PAM_SUCCESS) {
retval = pam_authenticate (pamh, 0);
if (retval != PAM_SUCCESS) {
pam_end (pamh, retval);
}
}
if (retval == PAM_SUCCESS) {
retval = pam_acct_mgmt (pamh, 0);
if (retval != PAM_SUCCESS) {
pam_end (pamh, retval);
}
}
if (retval != PAM_SUCCESS) {
fprintf (stderr, _("%s: PAM authentication failed\n"),
Prog);
exit (1);
}
#endif /* USE_PAM */
OPENLOG (Prog);
#ifdef SHADOWGRP
is_shadow_grp = sgr_file_present ();
#endif
/*
* The open routines for the DBM files don't use read-write as the
* mode, so we have to clue them in.
*/
#ifdef NDBM
gr_dbm_mode = O_RDWR;
#ifdef SHADOWGRP
sg_dbm_mode = O_RDWR;
#endif /* SHADOWGRP */
#endif /* NDBM */
process_flags (argc, argv);
/*
* Start with a quick check to see if the group exists.
*/
if (getgrnam (group_name)) {
if (fflg) {
exit (E_SUCCESS);
}
fprintf (stderr, _("%s: group %s exists\n"), Prog,
group_name);
exit (E_NAME_IN_USE);
}
/*
* Do the hard stuff - open the files, create the group entries,
* then close and update the files.
*/
open_files ();
if (!gflg || !oflg)
find_new_gid ();
grp_update ();
close_files ();
#ifdef USE_PAM
if (retval == PAM_SUCCESS) {
retval = pam_chauthtok (pamh, 0);
if (retval != PAM_SUCCESS) {
pam_end (pamh, retval);
}
}
if (retval != PAM_SUCCESS) {
fprintf (stderr, _("%s: PAM chauthtok failed\n"), Prog);
exit (1);
}
if (retval == PAM_SUCCESS)
pam_end (pamh, PAM_SUCCESS);
#endif /* USE_PAM */
exit (E_SUCCESS);
/*NOTREACHED*/
}
int main(int argc, char **argv) {
hardened_shadow_openlog("su");
if (!hardened_shadow_get_current_username(¤t_username))
errx(EXIT_FAILURE, "Cannot determine your user name.");
parse_args(argc, argv);
uid_t my_uid = getuid();
bool is_root = (my_uid == 0);
if (!is_root && (!isatty(STDIN_FILENO) || !ttyname(STDIN_FILENO)))
errx(EXIT_FAILURE, "must be run from a terminal");
const struct pam_conv pam_conversation = {
misc_conv,
NULL
};
pam_handle_t *pam_handle = NULL;
int pam_rv = pam_start("su", target_username, &pam_conversation, &pam_handle);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_start: error %d", pam_rv);
su_fatal();
}
pam_rv = pam_set_item(pam_handle, PAM_TTY, ttyname(STDIN_FILENO));
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_set_item: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
pam_rv = pam_set_item(pam_handle, PAM_RUSER, current_username);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_set_item: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
pam_rv = pam_fail_delay(pam_handle, 1000000);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_fail_delay: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
pam_rv = pam_authenticate(pam_handle, 0);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_authenticate: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
pam_rv = pam_acct_mgmt(pam_handle, 0);
if (pam_rv != PAM_SUCCESS) {
if (is_root) {
warnx("%s (ignored)", pam_strerror(pam_handle, pam_rv));
} else if (pam_rv == PAM_NEW_AUTHTOK_REQD) {
pam_rv = pam_chauthtok(pam_handle, PAM_CHANGE_EXPIRED_AUTHTOK);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_chauthtok: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
} else {
hardened_shadow_syslog(LOG_ERR, "pam_acct_mgmt: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
}
if (setgid(target_gid) != 0) {
hardened_shadow_syslog(LOG_ERR, "bad group ID `%d' for user `%s': %s",
target_gid, target_username, strerror(errno));
pam_rv = PAM_ABORT;
goto pam_cleanup;
}
if (initgroups(target_username, target_gid) != 0) {
hardened_shadow_syslog(LOG_ERR, "initgroups failed for user `%s': %s",
target_username, strerror(errno));
pam_rv = PAM_ABORT;
goto pam_cleanup;
}
pam_rv = pam_setcred(pam_handle, PAM_ESTABLISH_CRED);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_setcred: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cleanup;
}
pam_rv = pam_open_session(pam_handle, 0);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_open_session: %s",
pam_strerror(pam_handle, pam_rv));
goto pam_cred_cleanup;
}
char **pam_env = pam_getenvlist(pam_handle);
if (!pam_env)
errx(EXIT_FAILURE, "pam_getenvlist returned NULL");
struct environment_options environment_options = {
.pam_environment = pam_env,
.preserve_environment = preserve_environment,
.login_shell = login_shell,
.target_username = target_username,
.target_homedir = target_homedir,
.target_shell = shell,
};
if (!hardened_shadow_prepare_environment(&environment_options)) {
pam_rv = PAM_ABORT;
goto pam_session_cleanup;
}
if (setuid(target_uid) != 0) {
hardened_shadow_syslog(LOG_ERR, "bad user ID `%d' for user `%s': %s",
target_uid, target_username, strerror(errno));
goto pam_session_cleanup;
}
int shell_argc = command ? 4 : 2;
char **shell_argv = calloc(shell_argc, sizeof(*shell_argv));
if (!shell_argv) {
hardened_shadow_syslog(LOG_ERR, "memory allocation failure");
goto pam_session_cleanup;
}
/* When argv[0] starts with a dash ("-"), bash will recognize
* it as a login shell. This is what shadow-utils does. */
shell_argv[0] = login_shell ? "-su" : shell;
if (command) {
shell_argv[1] = "-c";
shell_argv[2] = command;
}
shell_argv[shell_argc - 1] = NULL;
int status;
if (!run_shell(shell, shell_argv, &status)) {
pam_rv = PAM_ABORT;
goto pam_session_cleanup;
}
free(shell_argv);
pam_rv = pam_setcred(pam_handle, PAM_DELETE_CRED);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_setcred: %s",
pam_strerror(pam_handle, pam_rv));
pam_close_session(pam_handle, 0);
pam_end(pam_handle, pam_rv);
errx(EXIT_FAILURE, "pam_setcred");
}
pam_rv = pam_close_session(pam_handle, 0);
if (pam_rv != PAM_SUCCESS) {
hardened_shadow_syslog(LOG_ERR, "pam_close_session: %s",
pam_strerror(pam_handle, pam_rv));
pam_end(pam_handle, pam_rv);
errx(EXIT_FAILURE, "pam_close_session");
}
pam_end(pam_handle, pam_rv);
free(shell);
free(current_username);
free(target_username);
free(target_homedir);
hardened_shadow_closelog();
if (WIFEXITED(status))
return WEXITSTATUS(status);
return WTERMSIG(status) + 128;
pam_session_cleanup:
pam_close_session(pam_handle, 0);
pam_cred_cleanup:
pam_setcred(pam_handle, PAM_DELETE_CRED);
pam_cleanup:
pam_end(pam_handle, pam_rv);
su_fatal();
}
gchar *
mdm_verify_user (MdmDisplay *d,
const char *username,
gboolean allow_retry)
{
gint pamerr = 0;
struct passwd *pwent = NULL;
char *login, *passreq;
char *pam_stack = NULL;
MDM_PAM_QUAL void *p;
int null_tok = 0;
gboolean credentials_set = FALSE;
gboolean error_msg_given = FALSE;
gboolean started_timer = FALSE;
verify_user_again:
pamerr = 0;
login = NULL;
error_msg_given = FALSE;
credentials_set = FALSE;
started_timer = FALSE;
null_tok = 0;
/* Don't start a timed login if we've already entered a username */
if (username != NULL) {
login = g_strdup (username);
mdm_slave_greeter_ctl_no_ret (MDM_SETLOGIN, login);
} else {
/* start the timer for timed logins */
if ( ! ve_string_empty (mdm_daemon_config_get_value_string (MDM_KEY_TIMED_LOGIN)) &&
d->timed_login_ok && (d->attached)) {
mdm_slave_greeter_ctl_no_ret (MDM_STARTTIMER, "");
started_timer = TRUE;
}
}
cur_mdm_disp = d;
authenticate_again:
if (prev_user && !login) {
login = g_strdup (prev_user);
} else if (login && !prev_user) {
prev_user = g_strdup (login);
auth_retries = 0;
} else if (login && prev_user && strcmp (login, prev_user)) {
g_free (prev_user);
prev_user = g_strdup (login);
auth_retries = 0;
}
/*
* Initialize a PAM session for the user...
* Get value per-display so different displays can use different
* PAM Stacks, in case one display should use a different
* authentication mechanism than another display.
*/
pam_stack = mdm_daemon_config_get_value_string_per_display (MDM_KEY_PAM_STACK,
(char *)d->name);
if ( ! create_pamh (d, pam_stack, login, &pamc, d->name, &pamerr)) {
if (started_timer)
mdm_slave_greeter_ctl_no_ret (MDM_STOPTIMER, "");
g_free (pam_stack);
goto pamerr;
}
g_free (pam_stack);
/*
* have to unset login otherwise there is no chance to ever enter
* a different user
*/
g_free (login);
login = NULL;
pam_set_item (pamh, PAM_USER_PROMPT, _("Username:"******"PASSREQ=");
if (mdm_daemon_config_get_value_bool (MDM_KEY_PASSWORD_REQUIRED) ||
((passreq != NULL) && g_ascii_strcasecmp (passreq, "YES") == 0))
null_tok |= PAM_DISALLOW_NULL_AUTHTOK;
mdm_verify_select_user (NULL);
/* Start authentication session */
did_we_ask_for_password = FALSE;
if ((pamerr = pam_authenticate (pamh, null_tok)) != PAM_SUCCESS) {
if ( ! ve_string_empty (selected_user)) {
pam_handle_t *tmp_pamh;
/* Face browser was used to select a user,
just completely rewhack everything since it
seems various PAM implementations are
having goats with just setting PAM_USER
and trying to pam_authenticate again */
g_free (login);
login = selected_user;
selected_user = NULL;
mdm_sigterm_block_push ();
mdm_sigchld_block_push ();
tmp_pamh = pamh;
pamh = NULL;
mdm_sigchld_block_pop ();
mdm_sigterm_block_pop ();
/* FIXME: what about errors */
/* really this has been a sucess, not a failure */
pam_end (tmp_pamh, pamerr);
g_free (prev_user);
prev_user = NULL;
auth_retries = 0;
mdm_slave_greeter_ctl_no_ret (MDM_SETLOGIN, login);
goto authenticate_again;
}
if (started_timer)
mdm_slave_greeter_ctl_no_ret (MDM_STOPTIMER, "");
if (mdm_slave_action_pending ()) {
/* FIXME: see note above about PAM_FAIL_DELAY */
/* #ifndef PAM_FAIL_DELAY */
mdm_sleep_no_signal (mdm_daemon_config_get_value_int (MDM_KEY_RETRY_DELAY));
/* wait up to 100ms randomly */
usleep (g_random_int_range (0, 100000));
/* #endif */ /* PAM_FAIL_DELAY */
mdm_error ("Couldn't authenticate user");
if (prev_user) {
unsigned max_auth_retries = 3;
char *val = mdm_read_default ("LOGIN_RETRIES=");
if (val) {
max_auth_retries = atoi (val);
g_free (val);
}
if (allow_retry == FALSE || pamerr == PAM_MAXTRIES ||
++auth_retries >= max_auth_retries) {
g_free (prev_user);
prev_user = NULL;
auth_retries = 0;
}
}
} else {
/* cancel, configurator etc pressed */
g_free (prev_user);
prev_user = NULL;
auth_retries = 0;
}
goto pamerr;
}
/* stop the timer for timed logins */
if (started_timer)
mdm_slave_greeter_ctl_no_ret (MDM_STOPTIMER, "");
g_free (login);
login = NULL;
g_free (prev_user);
prev_user = NULL;
if ((pamerr = pam_get_item (pamh, PAM_USER, &p)) != PAM_SUCCESS) {
login = NULL;
/* is not really an auth problem, but it will
pretty much look as such, it shouldn't really
happen */
if (mdm_slave_action_pending ())
mdm_error ("Couldn't authenticate user");
goto pamerr;
}
login = g_strdup ((const char *)p);
/* kind of anal, the greeter likely already knows, but it could have
been changed */
mdm_slave_greeter_ctl_no_ret (MDM_SETLOGIN, login);
if ( ! mdm_slave_check_user_wants_to_log_in (login)) {
/* cleanup stuff */
mdm_slave_greeter_ctl_no_ret (MDM_SETLOGIN, "");
g_free (login);
login = NULL;
mdm_slave_greeter_ctl_no_ret (MDM_RESETOK, "");
mdm_verify_cleanup (d);
goto verify_user_again;
}
/* Check if user is root and is allowed to log in */
pwent = getpwnam (login);
if (( ! mdm_daemon_config_get_value_bool (MDM_KEY_ALLOW_ROOT) ||
( ! d->attached )) &&
(pwent != NULL && pwent->pw_uid == 0)) {
mdm_error ("Root login disallowed on display '%s'", d->name);
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX,
_("\nThe system administrator "
"is not allowed to login "
"from this screen"));
/*mdm_slave_greeter_ctl_no_ret (MDM_ERRDLG,
_("Root login disallowed"));*/
error_msg_given = TRUE;
goto pamerr;
}
if (mdm_daemon_config_get_value_bool (MDM_KEY_DISPLAY_LAST_LOGIN)) {
char *info = mdm_get_last_info (login);
mdm_slave_greeter_ctl_no_ret (MDM_MSG, info);
g_free (info);
}
/* Check if the user's account is healthy. */
pamerr = pam_acct_mgmt (pamh, null_tok);
switch (pamerr) {
case PAM_SUCCESS :
break;
case PAM_NEW_AUTHTOK_REQD :
if ((pamerr = pam_chauthtok (pamh, PAM_CHANGE_EXPIRED_AUTHTOK)) != PAM_SUCCESS) {
mdm_error ("Authentication token change failed for user %s", login);
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX,
_("\nThe change of the authentication token failed. "
"Please try again later or contact the system administrator."));
error_msg_given = TRUE;
goto pamerr;
}
break;
case PAM_ACCT_EXPIRED :
mdm_error ("User %s no longer permitted to access the system", login);
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX,
_("\nThe system administrator has disabled your account."));
error_msg_given = TRUE;
goto pamerr;
case PAM_PERM_DENIED :
mdm_error ("User %s not permitted to gain access at this time", login);
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX,
_("\nThe system administrator has disabled access to the system temporarily."));
error_msg_given = TRUE;
goto pamerr;
default :
if (mdm_slave_action_pending ())
mdm_error ("Couldn't set acct. mgmt for %s", login);
goto pamerr;
}
pwent = getpwnam (login);
if (/* paranoia */ pwent == NULL ||
! mdm_setup_gids (login, pwent->pw_gid)) {
mdm_error ("Cannot set user group for %s", login);
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX,
_("\nCannot set your user group; "
"you will not be able to log in. "
"Please contact your system administrator."));
goto pamerr;
}
did_setcred = TRUE;
/* Set credentials */
pamerr = pam_setcred (pamh, PAM_ESTABLISH_CRED);
if (pamerr != PAM_SUCCESS) {
did_setcred = FALSE;
if (mdm_slave_action_pending ())
mdm_error ("Couldn't set credentials for %s", login);
goto pamerr;
}
credentials_set = TRUE;
opened_session = TRUE;
/* Register the session */
pamerr = pam_open_session (pamh, 0);
if (pamerr != PAM_SUCCESS) {
opened_session = FALSE;
/* we handle this above */
did_setcred = FALSE;
if (mdm_slave_action_pending ())
mdm_error ("Couldn't open session for %s", login);
goto pamerr;
}
/* Workaround to avoid mdm messages being logged as PAM_pwdb */
mdm_log_shutdown ();
mdm_log_init ();
cur_mdm_disp = NULL;
/*
* Login succeeded.
* This function is a no-op if libaudit is not present.
*/
log_to_audit_system(login, d->hostname, d->name, AU_SUCCESS);
return login;
pamerr:
/*
* Take care of situation where we get here before setting pwent.
* Since login can be passed in as NULL, get the actual value if
* possible.
*/
if ((pam_get_item (pamh, PAM_USER, &p)) == PAM_SUCCESS) {
g_free (login);
login = g_strdup ((const char *)p);
}
if (pwent == NULL && login != NULL) {
pwent = getpwnam (login);
}
/*
* Log the failed login attempt.
* This function is a no-op if libaudit is not present.
*/
log_to_audit_system(login, d->hostname, d->name, AU_FAILED);
/* The verbose authentication is turned on, output the error
* message from the PAM subsystem */
if ( ! error_msg_given &&
mdm_slave_action_pending ()) {
mdm_slave_write_utmp_wtmp_record (d,
MDM_SESSION_RECORD_TYPE_FAILED_ATTEMPT,
login, getpid ());
/*
* I'm not sure yet if I should display this message for any
* other issues - heeten
* Adding AUTHINFO_UNAVAIL to the list - its what an unknown
* user is.
*/
if (pamerr == PAM_AUTH_ERR ||
pamerr == PAM_USER_UNKNOWN ||
pamerr == PAM_AUTHINFO_UNAVAIL) {
gboolean is_capslock = FALSE;
const char *basemsg;
char *msg;
char *ret;
ret = mdm_slave_greeter_ctl (MDM_QUERY_CAPSLOCK, "");
if ( ! ve_string_empty (ret))
is_capslock = TRUE;
g_free (ret);
/* Only give this message if we actually asked for
password, otherwise it would be silly to say that
the password may have been wrong */
if (did_we_ask_for_password) {
basemsg = _("\nIncorrect username or password. "
"Letters must be typed in the correct "
"case.");
} else {
basemsg = _("\nAuthentication failed. "
"Letters must be typed in the correct "
"case.");
}
if (is_capslock) {
msg = g_strconcat (basemsg, " ",
_("Caps Lock is on."),
NULL);
} else {
msg = g_strdup (basemsg);
}
mdm_slave_greeter_ctl_no_ret (MDM_ERRBOX, msg);
g_free (msg);
} else {
mdm_slave_greeter_ctl_no_ret (MDM_ERRDLG, _("Authentication failed"));
}
}
did_setcred = FALSE;
opened_session = FALSE;
if (pamh != NULL) {
pam_handle_t *tmp_pamh;
mdm_sigterm_block_push ();
mdm_sigchld_block_push ();
tmp_pamh = pamh;
pamh = NULL;
mdm_sigchld_block_pop ();
mdm_sigterm_block_pop ();
/* Throw away the credentials */
if (credentials_set)
pam_setcred (tmp_pamh, PAM_DELETE_CRED);
pam_end (tmp_pamh, pamerr);
}
pamh = NULL;
/* Workaround to avoid mdm messages being logged as PAM_pwdb */
mdm_log_shutdown ();
mdm_log_init ();
g_free (login);
cur_mdm_disp = NULL;
return NULL;
}
int
main(int argc, char *argv[])
{
char hostname[MAXHOSTNAMELEN];
const char *user, *tty;
const void *item;
char **args, **pam_envlist, **pam_env;
struct passwd *pwd;
int o, pam_err, status;
pid_t pid;
while ((o = getopt(argc, argv, "")) != -1)
switch (o) {
default:
usage();
}
argc -= optind;
argv += optind;
if (argc > 0) {
user = *argv;
--argc;
++argv;
} else {
user = "******";
}
/* initialize PAM */
pamc.conv = &openpam_ttyconv;
pam_start("su", user, &pamc, &pamh);
/* set some items */
gethostname(hostname, sizeof(hostname));
if ((pam_err = pam_set_item(pamh, PAM_RHOST, hostname)) != PAM_SUCCESS)
goto pamerr;
user = getlogin();
if ((pam_err = pam_set_item(pamh, PAM_RUSER, user)) != PAM_SUCCESS)
goto pamerr;
tty = ttyname(STDERR_FILENO);
if ((pam_err = pam_set_item(pamh, PAM_TTY, tty)) != PAM_SUCCESS)
goto pamerr;
/* authenticate the applicant */
if ((pam_err = pam_authenticate(pamh, 0)) != PAM_SUCCESS)
goto pamerr;
if ((pam_err = pam_acct_mgmt(pamh, 0)) == PAM_NEW_AUTHTOK_REQD)
pam_err = pam_chauthtok(pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
if (pam_err != PAM_SUCCESS)
goto pamerr;
/* establish the requested credentials */
if ((pam_err = pam_setcred(pamh, PAM_ESTABLISH_CRED)) != PAM_SUCCESS)
goto pamerr;
/* authentication succeeded; open a session */
if ((pam_err = pam_open_session(pamh, 0)) != PAM_SUCCESS)
goto pamerr;
/* get mapped user name; PAM may have changed it */
pam_err = pam_get_item(pamh, PAM_USER, &item);
if (pam_err != PAM_SUCCESS || (pwd = getpwnam(user = item)) == NULL)
goto pamerr;
/* export PAM environment */
if ((pam_envlist = pam_getenvlist(pamh)) != NULL) {
for (pam_env = pam_envlist; *pam_env != NULL; ++pam_env) {
putenv(*pam_env);
free(*pam_env);
}
free(pam_envlist);
}
/* build argument list */
if ((args = calloc(argc + 2, sizeof *args)) == NULL) {
warn("calloc()");
goto err;
}
*args = pwd->pw_shell;
memcpy(args + 1, argv, argc * sizeof *args);
/* fork and exec */
switch ((pid = fork())) {
case -1:
warn("fork()");
goto err;
case 0:
/* child: give up privs and start a shell */
/* set uid and groups */
if (initgroups(pwd->pw_name, pwd->pw_gid) == -1) {
warn("initgroups()");
_exit(1);
}
if (setgid(pwd->pw_gid) == -1) {
warn("setgid()");
_exit(1);
}
if (setuid(pwd->pw_uid) == -1) {
warn("setuid()");
_exit(1);
}
execve(*args, args, environ);
warn("execve()");
_exit(1);
default:
/* parent: wait for child to exit */
waitpid(pid, &status, 0);
/* close the session and release PAM resources */
pam_err = pam_close_session(pamh, 0);
pam_end(pamh, pam_err);
exit(WEXITSTATUS(status));
}
pamerr:
fprintf(stderr, "Sorry\n");
err:
pam_end(pamh, pam_err);
exit(1);
}
int
main(int argc, char **argv)
{
char hostname[MAXHOSTNAMELEN];
struct passwd *pwd = NULL;
int o, pam_err;
uid_t uid;
while ((o = getopt(argc, argv, "d:h:loy")) != -1)
switch (o) {
case 'd':
yp_domain = optarg;
break;
case 'h':
yp_host = optarg;
break;
case 'l':
case 'o':
case 'y':
/* compatibility */
break;
default:
usage();
}
argc -= optind;
argv += optind;
uid = getuid();
switch (argc) {
case 0:
if ((pwd = getpwuid(uid)) == NULL)
errx(1, "who are you?");
break;
case 1:
if ((pwd = getpwnam(*argv)) == NULL)
errx(1, "%s: no such user", *argv);
break;
default:
usage();
}
if (uid != 0 && uid != pwd->pw_uid)
errx(1, "permission denied");
/* check where the user's from */
switch (pwd->pw_fields & _PWF_SOURCE) {
case _PWF_FILES:
fprintf(stderr, "Changing local password for %s\n",
pwd->pw_name);
break;
case _PWF_NIS:
fprintf(stderr, "Changing NIS password for %s\n",
pwd->pw_name);
break;
default:
fprintf(stderr, "Changing password for %s\n",
pwd->pw_name);
}
#define pam_check(func) do { \
if (pam_err != PAM_SUCCESS) { \
if (pam_err == PAM_AUTH_ERR || pam_err == PAM_PERM_DENIED || \
pam_err == PAM_AUTHTOK_RECOVERY_ERR) \
warnx("sorry"); \
else \
warnx("%s(): %s", func, pam_strerror(pamh, pam_err)); \
goto end; \
} \
} while (0)
/* initialize PAM */
pam_err = pam_start("passwd", pwd->pw_name, &pamc, &pamh);
pam_check("pam_start");
pam_err = pam_set_item(pamh, PAM_TTY, ttyname(STDERR_FILENO));
pam_check("pam_set_item");
gethostname(hostname, sizeof hostname);
pam_err = pam_set_item(pamh, PAM_RHOST, hostname);
pam_check("pam_set_item");
pam_err = pam_set_item(pamh, PAM_RUSER, getlogin());
pam_check("pam_set_item");
/* set YP domain and host */
pam_err = pam_set_data(pamh, "yp_domain", yp_domain, NULL);
pam_check("pam_set_data");
pam_err = pam_set_data(pamh, "yp_server", yp_host, NULL);
pam_check("pam_set_data");
/* set new password */
pam_err = pam_chauthtok(pamh, 0);
pam_check("pam_chauthtok");
end:
pam_end(pamh, pam_err);
exit(pam_err == PAM_SUCCESS ? 0 : 1);
}
/*
* Authentication thread.
*/
static void *
sshpam_thread(void *ctxtp)
{
struct pam_ctxt *ctxt = ctxtp;
Buffer buffer;
struct pam_conv sshpam_conv;
int flags = (options.permit_empty_passwd == 0 ?
PAM_DISALLOW_NULL_AUTHTOK : 0);
#ifndef UNSUPPORTED_POSIX_THREADS_HACK
extern char **environ;
char **env_from_pam;
u_int i;
const char *pam_user;
const char **ptr_pam_user = &pam_user;
char *tz = getenv("TZ");
sshpam_err = pam_get_item(sshpam_handle, PAM_USER,
(sshpam_const void **)ptr_pam_user);
if (sshpam_err != PAM_SUCCESS)
goto auth_fail;
environ[0] = NULL;
if (tz != NULL)
if (setenv("TZ", tz, 1) == -1)
error("PAM: could not set TZ environment: %s",
strerror(errno));
if (sshpam_authctxt != NULL) {
setproctitle("%s [pam]",
sshpam_authctxt->valid ? pam_user : "******");
}
#endif
sshpam_conv.conv = sshpam_thread_conv;
sshpam_conv.appdata_ptr = ctxt;
if (sshpam_authctxt == NULL)
fatal("%s: PAM authctxt not initialized", __func__);
buffer_init(&buffer);
sshpam_err = pam_set_item(sshpam_handle, PAM_CONV,
(const void *)&sshpam_conv);
if (sshpam_err != PAM_SUCCESS)
goto auth_fail;
sshpam_err = pam_authenticate(sshpam_handle, flags);
if (sshpam_err != PAM_SUCCESS)
goto auth_fail;
if (compat20) {
if (!do_pam_account()) {
sshpam_err = PAM_ACCT_EXPIRED;
goto auth_fail;
}
if (sshpam_authctxt->force_pwchange) {
sshpam_err = pam_chauthtok(sshpam_handle,
PAM_CHANGE_EXPIRED_AUTHTOK);
if (sshpam_err != PAM_SUCCESS)
goto auth_fail;
sshpam_password_change_required(0);
}
}
buffer_put_cstring(&buffer, "OK");
#ifndef UNSUPPORTED_POSIX_THREADS_HACK
/* Export variables set by do_pam_account */
buffer_put_int(&buffer, sshpam_account_status);
buffer_put_int(&buffer, sshpam_authctxt->force_pwchange);
/* Export any environment strings set in child */
for(i = 0; environ[i] != NULL; i++)
; /* Count */
buffer_put_int(&buffer, i);
for(i = 0; environ[i] != NULL; i++)
buffer_put_cstring(&buffer, environ[i]);
/* Export any environment strings set by PAM in child */
env_from_pam = pam_getenvlist(sshpam_handle);
for(i = 0; env_from_pam != NULL && env_from_pam[i] != NULL; i++)
; /* Count */
buffer_put_int(&buffer, i);
for(i = 0; env_from_pam != NULL && env_from_pam[i] != NULL; i++)
buffer_put_cstring(&buffer, env_from_pam[i]);
#endif /* UNSUPPORTED_POSIX_THREADS_HACK */
/* XXX - can't do much about an error here */
ssh_msg_send(ctxt->pam_csock, sshpam_err, &buffer);
buffer_free(&buffer);
pthread_exit(NULL);
auth_fail:
buffer_put_cstring(&buffer,
pam_strerror(sshpam_handle, sshpam_err));
/* XXX - can't do much about an error here */
if (sshpam_err == PAM_ACCT_EXPIRED)
ssh_msg_send(ctxt->pam_csock, PAM_ACCT_EXPIRED, &buffer);
else
ssh_msg_send(ctxt->pam_csock, PAM_AUTH_ERR, &buffer);
buffer_free(&buffer);
pthread_exit(NULL);
return (NULL); /* Avoid warning for non-pthread case */
}
int main(int argc, char **argv)
{
pam_handle_t *pamh=NULL;
char *username=NULL;
int retcode;
/* did the user call with a username as an argument ? */
if (argc > 2) {
fprintf(stderr,"usage: %s [username]\n",argv[0]);
} else if (argc == 2) {
username = argv[1];
}
/* initialize the Linux-PAM library */
retcode = pam_start("blank", username, &conv, &pamh);
bail_out(pamh,1,retcode,"pam_start");
/* test the environment stuff */
{
#define MAXENV 15
const char *greek[MAXENV] = {
"a=alpha", "b=beta", "c=gamma", "d=delta", "e=epsilon",
"f=phi", "g=psi", "h=eta", "i=iota", "j=mu", "k=nu",
"l=zeta", "h=", "d", "k=xi"
};
char **env;
int i;
for (i=0; i<MAXENV; ++i) {
retcode = pam_putenv(pamh,greek[i]);
bail_out(pamh,0,retcode,"pam_putenv");
}
env = pam_getenvlist(pamh);
if (env)
env = pam_misc_drop_env(env);
else
fprintf(stderr,"???\n");
fprintf(stderr,"a test: c=[%s], j=[%s]\n"
, pam_getenv(pamh, "c"), pam_getenv(pamh, "j"));
}
/* to avoid using goto we abuse a loop here */
for (;;) {
/* authenticate the user --- `0' here, could have been PAM_SILENT
* | PAM_DISALLOW_NULL_AUTHTOK */
retcode = pam_authenticate(pamh, 0);
bail_out(pamh,0,retcode,"pam_authenticate");
/* has the user proved themself valid? */
if (retcode != PAM_SUCCESS) {
fprintf(stderr,"%s: invalid request\n",argv[0]);
break;
}
/* the user is valid, but should they have access at this
time? */
retcode = pam_acct_mgmt(pamh, 0); /* `0' could be as above */
bail_out(pamh,0,retcode,"pam_acct_mgmt");
if (retcode == PAM_NEW_AUTHTOK_REQD) {
fprintf(stderr,"Application must request new password...\n");
retcode = pam_chauthtok(pamh,PAM_CHANGE_EXPIRED_AUTHTOK);
bail_out(pamh,0,retcode,"pam_chauthtok");
}
if (retcode != PAM_SUCCESS) {
fprintf(stderr,"%s: invalid request\n",argv[0]);
break;
}
/* `0' could be as above */
retcode = pam_setcred(pamh, PAM_ESTABLISH_CRED);
bail_out(pamh,0,retcode,"pam_setcred1");
if (retcode != PAM_SUCCESS) {
fprintf(stderr,"%s: problem setting user credentials\n"
,argv[0]);
break;
}
/* open a session for the user --- `0' could be PAM_SILENT */
retcode = pam_open_session(pamh,0);
bail_out(pamh,0,retcode,"pam_open_session");
if (retcode != PAM_SUCCESS) {
fprintf(stderr,"%s: problem opening a session\n",argv[0]);
break;
}
fprintf(stderr,"The user has been authenticated and `logged in'\n");
/* close a session for the user --- `0' could be PAM_SILENT
* it is possible that this pam_close_call is in another program..
*/
retcode = pam_close_session(pamh,0);
bail_out(pamh,0,retcode,"pam_close_session");
if (retcode != PAM_SUCCESS) {
fprintf(stderr,"%s: problem closing a session\n",argv[0]);
break;
}
retcode = pam_setcred(pamh, PAM_DELETE_CRED);
bail_out(pamh,0,retcode,"pam_setcred2");
break; /* don't go on for ever! */
}
/* close the Linux-PAM library */
retcode = pam_end(pamh, PAM_SUCCESS);
pamh = NULL;
bail_out(pamh,1,retcode,"pam_end");
exit(0);
}
void
pwpam_process(const char *username, int argc, char **argv)
{
int ch, pam_err;
char hostname[MAXHOSTNAMELEN + 1];
/* details about the invoking user for logging */
const uid_t i_uid = getuid();
const struct passwd *const i_pwd = getpwuid(i_uid);
const char *const i_username = (i_pwd && i_pwd->pw_name)
? i_pwd->pw_name : "(null)";
while ((ch = getopt(argc, argv, "")) != -1) {
switch (ch) {
default:
usage();
/* NOTREACHED */
}
}
argc -= optind;
argv += optind;
switch (argc) {
case 0:
/* username already provided */
break;
case 1:
username = argv[0];
break;
default:
usage();
/* NOTREACHED */
}
(void)printf("Changing password for %s.\n", username);
/* initialize PAM -- always use the program name "passwd" */
pam_err = pam_start("passwd", username, &pamc, &pamh);
if (pam_err != PAM_SUCCESS)
errx(1, "unable to start PAM session: %s",
pam_strerror(NULL, pam_err));
pam_err = pam_set_item(pamh, PAM_TTY, ttyname(STDERR_FILENO));
pam_check("unable to set TTY");
(void)gethostname(hostname, sizeof hostname);
pam_err = pam_set_item(pamh, PAM_RHOST, hostname);
pam_check("unable to set RHOST");
pam_err = pam_set_item(pamh, PAM_RUSER, getlogin());
pam_check("unable to set RUSER");
/* set new password */
pam_err = pam_chauthtok(pamh, 0);
if (pam_err != PAM_SUCCESS) {
if (pam_err == PAM_PERM_DENIED) {
syslog(LOG_AUTH | LOG_NOTICE,
"user %s (UID %lu) failed to change the "
"PAM authentication token of user %s: %s",
i_username, (unsigned long)i_uid, username,
pam_strerror(pamh, pam_err));
}
printf("Unable to change auth token: %s\n",
pam_strerror(pamh, pam_err));
} else {
syslog(LOG_AUTH | LOG_INFO,
"user %s (UID %lu) successfully changed the "
"PAM authentication token of user %s",
i_username, (unsigned long)i_uid, username);
}
end:
pam_end(pamh, pam_err);
if (pam_err == PAM_SUCCESS)
return;
exit(1);
}
gboolean
mdm_verify_setup_user (MdmDisplay *d, const gchar *login, char **new_login)
{
gint pamerr = 0;
struct passwd *pwent = NULL;
MDM_PAM_QUAL void *p;
char *passreq;
char *pam_stack = NULL;
char *pam_service_name = NULL;
int null_tok = 0;
gboolean credentials_set;
const char *after_login;
credentials_set = FALSE;
*new_login = NULL;
if (login == NULL)
return FALSE;
cur_mdm_disp = d;
g_free (extra_standalone_message);
extra_standalone_message = g_strdup_printf ("%s (%s)",
_("Automatic login"),
login);
/*
* Initialize a PAM session for the user...
* Get value per-display so different displays can use different
* PAM Stacks, in case one display should use a different
* authentication mechanism than another display.
*/
pam_stack = mdm_daemon_config_get_value_string_per_display (MDM_KEY_PAM_STACK,
(char *)d->name);
pam_service_name = g_strdup_printf ("%s-autologin", pam_stack);
if ( ! create_pamh (d, pam_service_name, login, &standalone_pamc,
d->name, &pamerr)) {
g_free (pam_stack);
g_free (pam_service_name);
goto setup_pamerr;
}
g_free (pam_stack);
g_free (pam_service_name);
passreq = mdm_read_default ("PASSREQ=");
if (mdm_daemon_config_get_value_bool (MDM_KEY_PASSWORD_REQUIRED) ||
((passreq != NULL) && g_ascii_strcasecmp (passreq, "YES") == 0))
null_tok |= PAM_DISALLOW_NULL_AUTHTOK;
/* Start authentication session */
did_we_ask_for_password = FALSE;
if ((pamerr = pam_authenticate (pamh, null_tok)) != PAM_SUCCESS) {
if (mdm_slave_action_pending ()) {
mdm_error ("Couldn't authenticate user");
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("Authentication failed"));
}
goto setup_pamerr;
}
if ((pamerr = pam_get_item (pamh, PAM_USER, &p)) != PAM_SUCCESS) {
/* is not really an auth problem, but it will
pretty much look as such, it shouldn't really
happen */
mdm_error ("Couldn't authenticate user");
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("Authentication failed"));
goto setup_pamerr;
}
after_login = p;
if (after_login != NULL /* should never be */ &&
strcmp (after_login, login) != 0) {
*new_login = g_strdup (after_login);
}
/* Check if the user's account is healthy. */
pamerr = pam_acct_mgmt (pamh, null_tok);
switch (pamerr) {
case PAM_SUCCESS :
break;
case PAM_NEW_AUTHTOK_REQD :
/* XXX: this is for automatic and timed logins,
* we shouldn't be asking for new pw since we never
* authenticated the user. I suppose just ignoring
* this would be OK */
#if 0 /* don't change password */
if ((pamerr = pam_chauthtok (pamh, PAM_CHANGE_EXPIRED_AUTHTOK)) != PAM_SUCCESS) {
mdm_error ("Authentication token change failed for user %s", login);
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("\nThe change of the authentication token failed. "
"Please try again later or contact the system administrator."));
goto setup_pamerr;
}
#endif /* 0 */
break;
case PAM_ACCT_EXPIRED :
mdm_error ("User %s no longer permitted to access the system", login);
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("The system administrator has disabled your account."));
goto setup_pamerr;
case PAM_PERM_DENIED :
mdm_error ("User %s not permitted to gain access at this time", login);
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("The system administrator has disabled your access to the system temporarily."));
goto setup_pamerr;
default :
if (mdm_slave_action_pending ())
mdm_error ("Couldn't set acct. mgmt for %s", login);
goto setup_pamerr;
}
pwent = getpwnam (login);
if (/* paranoia */ pwent == NULL ||
! mdm_setup_gids (login, pwent->pw_gid)) {
mdm_error ("Cannot set user group for %s", login);
mdm_errorgui_error_box (cur_mdm_disp,
GTK_MESSAGE_ERROR,
_("Cannot set your user group; "
"you will not be able to log in. "
"Please contact your system administrator."));
goto setup_pamerr;
}
did_setcred = TRUE;
/* Set credentials */
pamerr = pam_setcred (pamh, PAM_ESTABLISH_CRED);
if (pamerr != PAM_SUCCESS) {
did_setcred = FALSE;
if (mdm_slave_action_pending ())
mdm_error ("Couldn't set credentials for %s", login);
goto setup_pamerr;
}
credentials_set = TRUE;
opened_session = TRUE;
/* Register the session */
pamerr = pam_open_session (pamh, 0);
if (pamerr != PAM_SUCCESS) {
did_setcred = FALSE;
opened_session = FALSE;
/* Throw away the credentials */
pam_setcred (pamh, PAM_DELETE_CRED);
if (mdm_slave_action_pending ())
mdm_error ("Couldn't open session for %s", login);
goto setup_pamerr;
}
/* Workaround to avoid mdm messages being logged as PAM_pwdb */
mdm_log_shutdown ();
mdm_log_init ();
cur_mdm_disp = NULL;
g_free (extra_standalone_message);
extra_standalone_message = NULL;
/*
* Login succeeded.
* This function is a no-op if libaudit is not present
*/
log_to_audit_system(login, d->hostname, d->name, AU_SUCCESS);
return TRUE;
setup_pamerr:
/*
* Take care of situation where we get here before setting pwent.
* Note login is never NULL when this function is called.
*/
if (pwent == NULL) {
pwent = getpwnam (login);
}
/*
* Log the failed login attempt.
* This function is a no-op if libaudit is not present
*/
log_to_audit_system(login, d->hostname, d->name, AU_FAILED);
did_setcred = FALSE;
opened_session = FALSE;
if (pamh != NULL) {
pam_handle_t *tmp_pamh;
mdm_sigterm_block_push ();
mdm_sigchld_block_push ();
tmp_pamh = pamh;
pamh = NULL;
mdm_sigchld_block_pop ();
mdm_sigterm_block_pop ();
/* Throw away the credentials */
if (credentials_set)
pam_setcred (tmp_pamh, PAM_DELETE_CRED);
pam_end (tmp_pamh, pamerr);
}
pamh = NULL;
/* Workaround to avoid mdm messages being logged as PAM_pwdb */
mdm_log_shutdown ();
mdm_log_init ();
cur_mdm_disp = NULL;
g_free (extra_standalone_message);
extra_standalone_message = NULL;
return FALSE;
}
int
main (int argc, char *argv[])
{
int retcode;
int ret;
pam_handle_t *pamh;
char *username;
char *hostname;
char *tty_name;
char *ttyn;
struct pam_conv conv = { misc_conv, NULL };
int failcount;
ret = 1;
username = NULL;
hostname = NULL;
tty_name = NULL;
retcode = pam_start ("login", username, &conv, &pamh);
if (retcode != PAM_SUCCESS) {
fprintf (stderr, "login: PAM Failure, aborting: %s\n",
pam_strerror (pamh, retcode));
exit (99);
}
ttyn = ttyname (0);
if (strncmp (ttyn, _PATH_DEV, 5) == 0) {
tty_name = ttyn + 5;
} else {
tty_name = ttyn;
}
retcode = pam_set_item (pamh, PAM_RHOST, hostname);
PAM_FAIL_CHECK;
retcode = pam_set_item (pamh, PAM_TTY, tty_name);
PAM_FAIL_CHECK;
pam_set_item (pamh, PAM_USER, NULL);
retcode = pam_set_item (pamh, PAM_USER_PROMPT, "Username: "******"Login incorrect\n\n");
pam_set_item (pamh, PAM_USER, NULL);
retcode = pam_authenticate (pamh, 0);
}
if (retcode != PAM_SUCCESS) {
fprintf (stderr, "\nLogin incorrect\n");
pam_end (pamh, retcode);
exit (0);
}
retcode = pam_acct_mgmt (pamh, 0);
if (retcode == PAM_NEW_AUTHTOK_REQD) {
retcode = pam_chauthtok (pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
}
PAM_FAIL_CHECK;
pam_putenv (pamh, "CKCON_TTY=/dev/tty55");
pam_putenv (pamh, "CKCON_X11_DISPLAY=:50");
retcode = pam_open_session (pamh, 0);
PAM_FAIL_CHECK;
retcode = pam_setcred (pamh, PAM_ESTABLISH_CRED);
PAM_FAIL_CHECK;
pam_get_item (pamh, PAM_USER, (const void **) &username);
printf ("Session opened for %s\n", username);
printf ("sleeping for 20 seconds...");
sleep (20);
PAM_END;
printf ("\nSession closed\n");
return ret;
}
/*
* login - create a new login session for a user
*
* login is typically called by getty as the second step of a
* new user session. getty is responsible for setting the line
* characteristics to a reasonable set of values and getting
* the name of the user to be logged in. login may also be
* called to create a new user session on a pty for a variety
* of reasons, such as X servers or network logins.
*
* the flags which login supports are
*
* -p - preserve the environment
* -r - perform autologin protocol for rlogin
* -f - do not perform authentication, user is preauthenticated
* -h - the name of the remote host
*/
int main (int argc, char **argv)
{
const char *tmptty;
char tty[BUFSIZ];
#ifdef RLOGIN
char term[128] = "";
#endif /* RLOGIN */
#if defined(HAVE_STRFTIME) && !defined(USE_PAM)
char ptime[80];
#endif
unsigned int delay;
unsigned int retries;
bool failed;
bool subroot = false;
#ifndef USE_PAM
bool is_console;
#endif
int err;
const char *cp;
char *tmp;
char fromhost[512];
struct passwd *pwd = NULL;
char **envp = environ;
const char *failent_user;
/*@null@*/struct utmp *utent;
#ifdef USE_PAM
int retcode;
pid_t child;
char *pam_user = NULL;
#else
struct spwd *spwd = NULL;
#endif
/*
* Some quick initialization.
*/
sanitize_env ();
(void) setlocale (LC_ALL, "");
(void) bindtextdomain (PACKAGE, LOCALEDIR);
(void) textdomain (PACKAGE);
initenv ();
amroot = (getuid () == 0);
Prog = Basename (argv[0]);
if (geteuid() != 0) {
fprintf (stderr, _("%s: Cannot possibly work without effective root\n"), Prog);
exit (1);
}
process_flags (argc, argv);
if ((isatty (0) == 0) || (isatty (1) == 0) || (isatty (2) == 0)) {
exit (1); /* must be a terminal */
}
utent = get_current_utmp ();
/*
* Be picky if run by normal users (possible if installed setuid
* root), but not if run by root. This way it still allows logins
* even if your getty is broken, or if something corrupts utmp,
* but users must "exec login" which will use the existing utmp
* entry (will not overwrite remote hostname). --marekm
*/
if (!amroot && (NULL == utent)) {
(void) puts (_("No utmp entry. You must exec \"login\" from the lowest level \"sh\""));
exit (1);
}
/* NOTE: utent might be NULL afterwards */
tmptty = ttyname (0);
if (NULL == tmptty) {
tmptty = "UNKNOWN";
}
STRFCPY (tty, tmptty);
#ifndef USE_PAM
is_console = console (tty);
#endif
if (rflg || hflg) {
/*
* Add remote hostname to the environment. I think
* (not sure) I saw it once on Irix. --marekm
*/
addenv ("REMOTEHOST", hostname);
}
if (fflg) {
preauth_flag = true;
}
if (hflg) {
reason = PW_RLOGIN;
}
#ifdef RLOGIN
if (rflg) {
assert (NULL == username);
username = xmalloc (USER_NAME_MAX_LENGTH + 1);
username[USER_NAME_MAX_LENGTH] = '\0';
if (do_rlogin (hostname, username, USER_NAME_MAX_LENGTH, term, sizeof term)) {
preauth_flag = true;
} else {
free (username);
username = NULL;
}
}
#endif /* RLOGIN */
OPENLOG ("login");
setup_tty ();
#ifndef USE_PAM
(void) umask (getdef_num ("UMASK", GETDEF_DEFAULT_UMASK));
{
/*
* Use the ULIMIT in the login.defs file, and if
* there isn't one, use the default value. The
* user may have one for themselves, but otherwise,
* just take what you get.
*/
long limit = getdef_long ("ULIMIT", -1L);
if (limit != -1) {
set_filesize_limit (limit);
}
}
#endif
/*
* The entire environment will be preserved if the -p flag
* is used.
*/
if (pflg) {
while (NULL != *envp) { /* add inherited environment, */
addenv (*envp, NULL); /* some variables change later */
envp++;
}
}
#ifdef RLOGIN
if (term[0] != '\0') {
addenv ("TERM", term);
} else
#endif /* RLOGIN */
{
/* preserve TERM from getty */
if (!pflg) {
tmp = getenv ("TERM");
if (NULL != tmp) {
addenv ("TERM", tmp);
}
}
}
init_env ();
if (optind < argc) { /* now set command line variables */
set_env (argc - optind, &argv[optind]);
}
if (rflg || hflg) {
cp = hostname;
#ifdef HAVE_STRUCT_UTMP_UT_HOST
} else if ((NULL != utent) && ('\0' != utent->ut_host[0])) {
cp = utent->ut_host;
#endif /* HAVE_STRUCT_UTMP_UT_HOST */
} else {
cp = "";
}
if ('\0' != *cp) {
snprintf (fromhost, sizeof fromhost,
" on '%.100s' from '%.200s'", tty, cp);
} else {
snprintf (fromhost, sizeof fromhost,
" on '%.100s'", tty);
}
top:
/* only allow ALARM sec. for login */
(void) signal (SIGALRM, alarm_handler);
timeout = getdef_unum ("LOGIN_TIMEOUT", ALARM);
if (timeout > 0) {
(void) alarm (timeout);
}
environ = newenvp; /* make new environment active */
delay = getdef_unum ("FAIL_DELAY", 1);
retries = getdef_unum ("LOGIN_RETRIES", RETRIES);
#ifdef USE_PAM
retcode = pam_start ("login", username, &conv, &pamh);
if (retcode != PAM_SUCCESS) {
fprintf (stderr,
_("login: PAM Failure, aborting: %s\n"),
pam_strerror (pamh, retcode));
SYSLOG ((LOG_ERR, "Couldn't initialize PAM: %s",
pam_strerror (pamh, retcode)));
exit (99);
}
/*
* hostname & tty are either set to NULL or their correct values,
* depending on how much we know. We also set PAM's fail delay to
* ours.
*
* PAM_RHOST and PAM_TTY are used for authentication, only use
* information coming from login or from the caller (e.g. no utmp)
*/
retcode = pam_set_item (pamh, PAM_RHOST, hostname);
PAM_FAIL_CHECK;
retcode = pam_set_item (pamh, PAM_TTY, tty);
PAM_FAIL_CHECK;
#ifdef HAS_PAM_FAIL_DELAY
retcode = pam_fail_delay (pamh, 1000000 * delay);
PAM_FAIL_CHECK;
#endif
/* if fflg, then the user has already been authenticated */
if (!fflg) {
unsigned int failcount = 0;
char hostn[256];
char loginprompt[256]; /* That's one hell of a prompt :) */
/* Make the login prompt look like we want it */
if (gethostname (hostn, sizeof (hostn)) == 0) {
snprintf (loginprompt,
sizeof (loginprompt),
_("%s login: "******"login: "******"TOO MANY LOGIN TRIES (%u)%s FOR '%s'",
failcount, fromhost, failent_user));
fprintf(stderr,
_("Maximum number of tries exceeded (%u)\n"),
failcount);
PAM_END;
exit(0);
} else if (retcode == PAM_ABORT) {
/* Serious problems, quit now */
(void) fputs (_("login: abort requested by PAM\n"), stderr);
SYSLOG ((LOG_ERR,"PAM_ABORT returned from pam_authenticate()"));
PAM_END;
exit(99);
} else if (retcode != PAM_SUCCESS) {
SYSLOG ((LOG_NOTICE,"FAILED LOGIN (%u)%s FOR '%s', %s",
failcount, fromhost, failent_user,
pam_strerror (pamh, retcode)));
failed = true;
}
if (!failed) {
break;
}
#ifdef WITH_AUDIT
audit_fd = audit_open ();
audit_log_acct_message (audit_fd,
AUDIT_USER_LOGIN,
NULL, /* Prog. name */
"login",
failent_user,
AUDIT_NO_ID,
hostname,
NULL, /* addr */
tty,
0); /* result */
close (audit_fd);
#endif /* WITH_AUDIT */
(void) puts ("");
(void) puts (_("Login incorrect"));
if (failcount >= retries) {
SYSLOG ((LOG_NOTICE,
"TOO MANY LOGIN TRIES (%u)%s FOR '%s'",
failcount, fromhost, failent_user));
fprintf(stderr,
_("Maximum number of tries exceeded (%u)\n"),
failcount);
PAM_END;
exit(0);
}
/*
* Let's give it another go around.
* Even if a username was given on the command
* line, prompt again for the username.
*/
retcode = pam_set_item (pamh, PAM_USER, NULL);
PAM_FAIL_CHECK;
}
/* We don't get here unless they were authenticated above */
(void) alarm (0);
}
/* Check the account validity */
retcode = pam_acct_mgmt (pamh, 0);
if (retcode == PAM_NEW_AUTHTOK_REQD) {
retcode = pam_chauthtok (pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
}
PAM_FAIL_CHECK;
/* Open the PAM session */
get_pam_user (&pam_user);
retcode = pam_open_session (pamh, hushed (pam_user) ? PAM_SILENT : 0);
PAM_FAIL_CHECK;
/* Grab the user information out of the password file for future usage
* First get the username that we are actually using, though.
*
* From now on, we will discard changes of the user (PAM_USER) by
* PAM APIs.
*/
get_pam_user (&pam_user);
if (NULL != username) {
free (username);
}
username = pam_user;
failent_user = get_failent_user (username);
pwd = xgetpwnam (username);
if (NULL == pwd) {
SYSLOG ((LOG_ERR, "cannot find user %s", failent_user));
exit (1);
}
/* This set up the process credential (group) and initialize the
* supplementary group access list.
* This has to be done before pam_setcred
*/
if (setup_groups (pwd) != 0) {
exit (1);
}
retcode = pam_setcred (pamh, PAM_ESTABLISH_CRED);
PAM_FAIL_CHECK;
/* NOTE: If pam_setcred changes PAM_USER, this will not be taken
* into account.
*/
#else /* ! USE_PAM */
while (true) { /* repeatedly get login/password pairs */
/* user_passwd is always a pointer to this constant string
* or a passwd or shadow password that will be memzero by
* pw_free / spw_free.
* Do not free() user_passwd. */
const char *user_passwd = "!";
/* Do some cleanup to avoid keeping entries we do not need
* anymore. */
if (NULL != pwd) {
pw_free (pwd);
pwd = NULL;
}
if (NULL != spwd) {
spw_free (spwd);
spwd = NULL;
}
failed = false; /* haven't failed authentication yet */
if (NULL == username) { /* need to get a login id */
if (subroot) {
closelog ();
exit (1);
}
preauth_flag = false;
username = xmalloc (USER_NAME_MAX_LENGTH + 1);
username[USER_NAME_MAX_LENGTH] = '\0';
login_prompt (_("\n%s login: "******"!",
* the account is locked and the user cannot
* login, even if they have been
* "pre-authenticated."
*/
if ( ('!' == user_passwd[0])
|| ('*' == user_passwd[0])) {
failed = true;
}
}
if (strcmp (user_passwd, SHADOW_PASSWD_STRING) == 0) {
spwd = xgetspnam (username);
if (NULL != spwd) {
user_passwd = spwd->sp_pwdp;
} else {
/* The user exists in passwd, but not in
* shadow. SHADOW_PASSWD_STRING indicates
* that the password shall be in shadow.
*/
SYSLOG ((LOG_WARN,
"no shadow password for '%s'%s",
username, fromhost));
}
}
/*
* The -r and -f flags provide a name which has already
* been authenticated by some server.
*/
if (preauth_flag) {
goto auth_ok;
}
if (pw_auth (user_passwd, username, reason, (char *) 0) == 0) {
goto auth_ok;
}
SYSLOG ((LOG_WARN, "invalid password for '%s' %s",
failent_user, fromhost));
failed = true;
auth_ok:
/*
* This is the point where all authenticated users wind up.
* If you reach this far, your password has been
* authenticated and so on.
*/
if ( !failed
&& (NULL != pwd)
&& (0 == pwd->pw_uid)
&& !is_console) {
SYSLOG ((LOG_CRIT, "ILLEGAL ROOT LOGIN %s", fromhost));
failed = true;
}
if ( !failed
&& !login_access (username, ('\0' != *hostname) ? hostname : tty)) {
SYSLOG ((LOG_WARN, "LOGIN '%s' REFUSED %s",
username, fromhost));
failed = true;
}
if ( (NULL != pwd)
&& getdef_bool ("FAILLOG_ENAB")
&& !failcheck (pwd->pw_uid, &faillog, failed)) {
SYSLOG ((LOG_CRIT,
"exceeded failure limit for '%s' %s",
username, fromhost));
failed = true;
}
if (!failed) {
break;
}
/* don't log non-existent users */
if ((NULL != pwd) && getdef_bool ("FAILLOG_ENAB")) {
failure (pwd->pw_uid, tty, &faillog);
}
if (getdef_str ("FTMP_FILE") != NULL) {
#ifdef USE_UTMPX
struct utmpx *failent =
prepare_utmpx (failent_user,
tty,
/* FIXME: or fromhost? */hostname,
utent);
#else /* !USE_UTMPX */
struct utmp *failent =
prepare_utmp (failent_user,
tty,
hostname,
utent);
#endif /* !USE_UTMPX */
failtmp (failent_user, failent);
free (failent);
}
retries--;
if (retries <= 0) {
SYSLOG ((LOG_CRIT, "REPEATED login failures%s",
fromhost));
}
/*
* If this was a passwordless account and we get here, login
* was denied (securetty, faillog, etc.). There was no
* password prompt, so do it now (will always fail - the bad
* guys won't see that the passwordless account exists at
* all). --marekm
*/
if (user_passwd[0] == '\0') {
pw_auth ("!", username, reason, (char *) 0);
}
/*
* Authentication of this user failed.
* The username must be confirmed in the next try.
*/
free (username);
username = NULL;
/*
* Wait a while (a la SVR4 /usr/bin/login) before attempting
* to login the user again. If the earlier alarm occurs
* before the sleep() below completes, login will exit.
*/
if (delay > 0) {
(void) sleep (delay);
}
(void) puts (_("Login incorrect"));
/* allow only one attempt with -r or -f */
if (rflg || fflg || (retries <= 0)) {
closelog ();
exit (1);
}
} /* while (true) */
#endif /* ! USE_PAM */
assert (NULL != username);
assert (NULL != pwd);
(void) alarm (0); /* turn off alarm clock */
#ifndef USE_PAM /* PAM does this */
/*
* porttime checks moved here, after the user has been
* authenticated. now prints a message, as suggested
* by Ivan Nejgebauer <*****@*****.**>. --marekm
*/
if ( getdef_bool ("PORTTIME_CHECKS_ENAB")
&& !isttytime (username, tty, time ((time_t *) 0))) {
SYSLOG ((LOG_WARN, "invalid login time for '%s'%s",
username, fromhost));
closelog ();
bad_time_notify ();
exit (1);
}
check_nologin (pwd->pw_uid == 0);
#endif
if (getenv ("IFS")) { /* don't export user IFS ... */
addenv ("IFS= \t\n", NULL); /* ... instead, set a safe IFS */
}
if (pwd->pw_shell[0] == '*') { /* subsystem root */
pwd->pw_shell++; /* skip the '*' */
subsystem (pwd); /* figure out what to execute */
subroot = true; /* say I was here again */
endpwent (); /* close all of the file which were */
endgrent (); /* open in the original rooted file */
endspent (); /* system. they will be re-opened */
#ifdef SHADOWGRP
endsgent (); /* in the new rooted file system */
#endif
goto top; /* go do all this all over again */
}
#ifdef WITH_AUDIT
audit_fd = audit_open ();
audit_log_acct_message (audit_fd,
AUDIT_USER_LOGIN,
NULL, /* Prog. name */
"login",
username,
AUDIT_NO_ID,
hostname,
NULL, /* addr */
tty,
1); /* result */
close (audit_fd);
#endif /* WITH_AUDIT */
#ifndef USE_PAM /* pam_lastlog handles this */
if (getdef_bool ("LASTLOG_ENAB")) { /* give last login and log this one */
dolastlog (&ll, pwd, tty, hostname);
}
#endif
#ifndef USE_PAM /* PAM handles this as well */
/*
* Have to do this while we still have root privileges, otherwise we
* don't have access to /etc/shadow.
*/
if (NULL != spwd) { /* check for age of password */
if (expire (pwd, spwd)) {
/* The user updated her password, get the new
* entries.
* Use the x variants because we need to keep the
* entry for a long time, and there might be other
* getxxyy in between.
*/
pw_free (pwd);
pwd = xgetpwnam (username);
if (NULL == pwd) {
SYSLOG ((LOG_ERR,
"cannot find user %s after update of expired password",
username));
exit (1);
}
spw_free (spwd);
spwd = xgetspnam (username);
}
}
setup_limits (pwd); /* nice, ulimit etc. */
#endif /* ! USE_PAM */
chown_tty (pwd);
#ifdef USE_PAM
/*
* We must fork before setuid() because we need to call
* pam_close_session() as root.
*/
(void) signal (SIGINT, SIG_IGN);
child = fork ();
if (child < 0) {
/* error in fork() */
fprintf (stderr, _("%s: failure forking: %s"),
Prog, strerror (errno));
PAM_END;
exit (0);
} else if (child != 0) {
/*
* parent - wait for child to finish, then cleanup
* session
*/
wait (NULL);
PAM_END;
exit (0);
}
/* child */
#endif
/* If we were init, we need to start a new session */
if (getppid() == 1) {
setsid();
if (ioctl(0, TIOCSCTTY, 1) != 0) {
fprintf (stderr, _("TIOCSCTTY failed on %s"), tty);
}
}
/*
* The utmp entry needs to be updated to indicate the new status
* of the session, the new PID and SID.
*/
update_utmp (username, tty, hostname, utent);
/* The pwd and spwd entries for the user have been copied.
*
* Close all the files so that unauthorized access won't occur.
*/
endpwent (); /* stop access to password file */
endgrent (); /* stop access to group file */
endspent (); /* stop access to shadow passwd file */
#ifdef SHADOWGRP
endsgent (); /* stop access to shadow group file */
#endif
/* Drop root privileges */
#ifndef USE_PAM
if (setup_uid_gid (pwd, is_console))
#else
/* The group privileges were already dropped.
* See setup_groups() above.
*/
if (change_uid (pwd))
#endif
{
exit (1);
}
setup_env (pwd); /* set env vars, cd to the home dir */
#ifdef USE_PAM
{
const char *const *env;
env = (const char *const *) pam_getenvlist (pamh);
while ((NULL != env) && (NULL != *env)) {
addenv (*env, NULL);
env++;
}
}
#endif
(void) setlocale (LC_ALL, "");
(void) bindtextdomain (PACKAGE, LOCALEDIR);
(void) textdomain (PACKAGE);
if (!hushed (username)) {
addenv ("HUSHLOGIN=FALSE", NULL);
/*
* pam_unix, pam_mail and pam_lastlog should take care of
* this
*/
#ifndef USE_PAM
motd (); /* print the message of the day */
if ( getdef_bool ("FAILLOG_ENAB")
&& (0 != faillog.fail_cnt)) {
failprint (&faillog);
/* Reset the lockout times if logged in */
if ( (0 != faillog.fail_max)
&& (faillog.fail_cnt >= faillog.fail_max)) {
(void) puts (_("Warning: login re-enabled after temporary lockout."));
SYSLOG ((LOG_WARN,
"login '%s' re-enabled after temporary lockout (%d failures)",
username, (int) faillog.fail_cnt));
}
}
if ( getdef_bool ("LASTLOG_ENAB")
&& (ll.ll_time != 0)) {
time_t ll_time = ll.ll_time;
#ifdef HAVE_STRFTIME
(void) strftime (ptime, sizeof (ptime),
"%a %b %e %H:%M:%S %z %Y",
localtime (&ll_time));
printf (_("Last login: %s on %s"),
ptime, ll.ll_line);
#else
printf (_("Last login: %.19s on %s"),
ctime (&ll_time), ll.ll_line);
#endif
#ifdef HAVE_LL_HOST /* __linux__ || SUN4 */
if ('\0' != ll.ll_host[0]) {
printf (_(" from %.*s"),
(int) sizeof ll.ll_host, ll.ll_host);
}
#endif
printf (".\n");
}
agecheck (spwd);
mailcheck (); /* report on the status of mail */
#endif /* !USE_PAM */
} else {
addenv ("HUSHLOGIN=TRUE", NULL);
}
ttytype (tty);
(void) signal (SIGQUIT, SIG_DFL); /* default quit signal */
(void) signal (SIGTERM, SIG_DFL); /* default terminate signal */
(void) signal (SIGALRM, SIG_DFL); /* default alarm signal */
(void) signal (SIGHUP, SIG_DFL); /* added this. --marekm */
(void) signal (SIGINT, SIG_DFL); /* default interrupt signal */
if (0 == pwd->pw_uid) {
SYSLOG ((LOG_NOTICE, "ROOT LOGIN %s", fromhost));
} else if (getdef_bool ("LOG_OK_LOGINS")) {
SYSLOG ((LOG_INFO, "'%s' logged in %s", username, fromhost));
}
closelog ();
tmp = getdef_str ("FAKE_SHELL");
if (NULL != tmp) {
err = shell (tmp, pwd->pw_shell, newenvp); /* fake shell */
} else {
/* exec the shell finally */
err = shell (pwd->pw_shell, (char *) 0, newenvp);
}
return ((err == ENOENT) ? E_CMD_NOTFOUND : E_CMD_NOEXEC);
}
