/* Set chassis MAC address */
int c3725_chassis_set_mac_addr(c3725_t *router,char *mac_addr)
{
if (parse_mac_addr(&router->mac_addr,mac_addr) == -1) {
vm_error(router->vm,"unable to parse MAC address '%s'.\n",mac_addr);
return(-1);
}
/* Set the chassis base MAC address */
c3725_burn_mac_addr(router,&router->mac_addr);
return(0);
}
int acacia_probe(int port_num)
{
struct acacia_local *lp = NULL;
struct acacia_if_t *bif = NULL;
struct net_device *dev = NULL;
int i, retval;
bif = &acacia_iflist[port_num];
if (port_num == 0) {
request_region(bif->iobase, 0x24C, "ACACIA0");
}
else if (port_num == 1)
{
request_region(bif->iobase, 0x24C, "ACACIA1");
}
/* Allocate a new 'dev' if needed */
dev = init_etherdev(0, sizeof(struct acacia_local));
bif->dev = dev;
if (port_num == 0) {
info("RC32438 ethernet0 found at 0x%08x\n", bif->iobase);
}
else if (port_num == 1)
info("RC32438 ethernet1 found at 0x%08x\n", bif->iobase);
/* Fill in the 'dev' fields. */
dev->base_addr = bif->iobase;
dev->irq = bif->rx_dma_irq; /* just use the rx dma irq */
if ((retval = parse_mac_addr(dev, bif->mac_str))) {
err("%s: MAC address parse failed\n", __func__);
retval = -EINVAL;
goto probe1_err_out;
}
info("HW Address ");
for (i = 0; i < 6; i++) {
printk("%2.2x", dev->dev_addr[i]);
if (i<5)
printk(":");
}
printk("\n");
info("Rx IRQ %d, Tx IRQ %d\n", bif->rx_dma_irq, bif->tx_dma_irq);
/* Initialize the device structure. */
if (dev->priv == NULL) {
lp = (struct acacia_local *)kmalloc(sizeof(*lp), GFP_KERNEL);
memset(lp, 0, sizeof(struct acacia_local));
} else {
lp = (struct acacia_local *)dev->priv;
}
dev->priv = lp;
lp->rx_irq = bif->rx_dma_irq;
lp->tx_irq = bif->tx_dma_irq;
lp->ovr_irq = bif->rx_ovr_irq;
lp->eth_regs = ioremap_nocache(bif->iobase,
sizeof(*lp->eth_regs));
if (!lp->eth_regs) {
err("Can't remap eth registers\n");
retval = -ENXIO;
goto probe1_err_out;
}
if (port_num == 0) {
lp->rx_dma_regs =
ioremap_nocache(DMA0_PhysicalAddress + 2*DMA_CHAN_OFFSET,
sizeof(struct DMA_Chan_s));
if (!lp->rx_dma_regs) {
err("Can't remap Rx DMA registers\n");
retval = -ENXIO;
goto probe1_err_out;
}
lp->tx_dma_regs =
ioremap_nocache(DMA0_PhysicalAddress + 3*DMA_CHAN_OFFSET,
sizeof(struct DMA_Chan_s));
if (!lp->tx_dma_regs) {
err("Can't remap Tx DMA registers\n");
retval = -ENXIO;
goto probe1_err_out;
}
}
else if (port_num == 1) {
lp->rx_dma_regs =
ioremap_nocache(DMA0_PhysicalAddress + 4*DMA_CHAN_OFFSET,
sizeof(struct DMA_Chan_s));
if (!lp->rx_dma_regs) {
err("Can't remap Rx DMA registers\n");
retval = -ENXIO;
goto probe1_err_out;
}
lp->tx_dma_regs =
ioremap_nocache(DMA0_PhysicalAddress + 5*DMA_CHAN_OFFSET,
sizeof(struct DMA_Chan_s));
if (!lp->tx_dma_regs) {
err("Can't remap Tx DMA registers\n");
retval = -ENXIO;
goto probe1_err_out;
}
}
lp->td_ring =
(DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE,
GFP_KERNEL);
if (!lp->td_ring) {
err("Can't allocate descriptors\n");
retval = -ENOMEM;
goto probe1_err_out;
}
dma_cache_inv((unsigned long)(lp->td_ring),
TD_RING_SIZE + RD_RING_SIZE);
/* now convert TD_RING pointer to KSEG1 */
lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring);
lp->rd_ring = &lp->td_ring[ACACIA_NUM_TDS];
/* allocate receive buffer area */
/* FIXME, maybe we should use skbs */
if ((lp->rba = (u8*)kmalloc(ACACIA_NUM_RDS * ACACIA_RBSIZE,
GFP_KERNEL)) == NULL) {
err("couldn't allocate receive buffers\n");
retval = -ENOMEM;
goto probe1_err_out;
} /* get virtual dma address */
dma_cache_inv((unsigned long)(lp->rba),
ACACIA_NUM_RDS * ACACIA_RBSIZE);
spin_lock_init(&lp->lock);
dev->open = acacia_open;
dev->stop = acacia_close;
dev->hard_start_xmit = acacia_send_packet;
dev->get_stats = acacia_get_stats;
dev->set_multicast_list = &acacia_multicast_list;
dev->tx_timeout = acacia_tx_timeout;
dev->watchdog_timeo = ACACIA_TX_TIMEOUT;
#ifdef ACACIA_PROC_DEBUG
lp->ps = create_proc_read_entry ("net/rc32438", 0, NULL,
acacia_read_proc, dev);
#endif
/*
* clear tally counter
*/
/* Fill in the fields of the device structure with ethernet values. */
ether_setup(dev);
return 0;
probe1_err_out:
acacia_cleanup_module();
err("%s failed. Returns %d\n", __func__, retval);
return retval;
}
