/*
* Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
*
* Hardware should enable LPC ROM by pin straps. This function does not
* handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
*
* The SB600 power-on default is to map 256K ROM space.
*
* Details: AMD SB600 BIOS Developer's Guide (BDG), page 15.
*/
static void sb600_enable_rom(void)
{
u8 reg8;
pci_devfn_t dev;
dev = pci_io_locate_device(PCI_ID(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SB600_LPC), 0);
/* Decode variable LPC ROM address ranges 1 and 2. */
reg8 = pci_io_read_config8(dev, 0x48);
reg8 |= (1 << 3) | (1 << 4);
pci_io_write_config8(dev, 0x48, reg8);
/* LPC ROM address range 1: */
/* Enable LPC ROM range mirroring start at 0x000e(0000). */
pci_io_write_config16(dev, 0x68, 0x000e);
/* Enable LPC ROM range mirroring end at 0x000f(ffff). */
pci_io_write_config16(dev, 0x6a, 0x000f);
/* LPC ROM address range 2: */
/*
* Enable LPC ROM range start at:
* 0xfff8(0000): 512KB
* 0xfff0(0000): 1MB
* 0xffe0(0000): 2MB
* 0xffc0(0000): 4MB
*/
pci_io_write_config16(dev, 0x6c, 0x10000 - (CONFIG_COREBOOT_ROMSIZE_KB >> 6)); /* 4 MB */
/* Enable LPC ROM range end at 0xffff(ffff). */
pci_io_write_config16(dev, 0x6e, 0xffff);
}
static void amd8111_enable_rom(void)
{
unsigned char byte;
device_t dev;
/* Enable 5MB rom access at 0xFFB00000 - 0xFFFFFFFF */
/* Locate the amd8111 */
dev = pci_io_locate_device(PCI_ID(0x1022, 0x7468), 0);
/* Set the 5MB enable bits */
byte = pci_io_read_config8(dev, 0x43);
byte |= 0xC0;
pci_io_write_config8(dev, 0x43, byte);
}
