unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
{
unsigned int max;
max = pci_scan_child_bus(bus);
pci_bus_add_devices(bus);
return max;
}
unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
{
unsigned int max;
max = pci_scan_child_bus(bus);
/*
* Make the discovered devices available.
*/
pci_bus_add_devices(bus);
return max;
}
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
struct pci_root_info *info = NULL;
int domain = root->segment;
int busnum = root->secondary.start;
LIST_HEAD(resources);
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
int node;
#ifdef CONFIG_ACPI_NUMA
int pxm;
#endif
if (pci_ignore_seg)
domain = 0;
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (multiple domains not supported)\n",
domain, busnum);
return NULL;
}
node = -1;
#ifdef CONFIG_ACPI_NUMA
pxm = acpi_get_pxm(device->handle);
if (pxm >= 0)
node = pxm_to_node(pxm);
if (node != -1)
set_mp_bus_to_node(busnum, node);
else
#endif
node = get_mp_bus_to_node(busnum);
if (node != -1 && !node_online(node))
node = -1;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (out of memory)\n", domain, busnum);
return NULL;
}
sd = &info->sd;
sd->domain = domain;
sd->node = node;
sd->companion = device;
/*
* Maybe the desired pci bus has been already scanned. In such case
* it is unnecessary to scan the pci bus with the given domain,busnum.
*/
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus exits, the content of bus->sysdata will
* be replaced by sd.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(info);
} else {
probe_pci_root_info(info, device, busnum, domain);
/* insert busn res at first */
pci_add_resource(&resources, &root->secondary);
/*
* _CRS with no apertures is normal, so only fall back to
* defaults or native bridge info if we're ignoring _CRS.
*/
if (pci_use_crs)
add_resources(info, &resources);
else {
free_pci_root_info_res(info);
x86_pci_root_bus_resources(busnum, &resources);
}
if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
(u8)root->secondary.end, root->mcfg_addr))
bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
sd, &resources);
if (bus) {
pci_scan_child_bus(bus);
pci_set_host_bridge_release(
to_pci_host_bridge(bus->bridge),
release_pci_root_info, info);
} else {
pci_free_resource_list(&resources);
__release_pci_root_info(info);
}
}
/* After the PCI-E bus has been walked and all devices discovered,
* configure any settings of the fabric that might be necessary.
*/
if (bus) {
struct pci_bus *child;
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
if (bus && node != -1) {
#ifdef CONFIG_ACPI_NUMA
if (pxm >= 0)
dev_printk(KERN_DEBUG, &bus->dev,
"on NUMA node %d (pxm %d)\n", node, pxm);
#else
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
#endif
}
return bus;
}
struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
int domain = root->segment;
int busnum = root->secondary.start;
struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
#ifdef CONFIG_ACPI_NUMA
int pxm;
#endif
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (multiple domains not supported)\n",
domain, busnum);
return NULL;
}
node = -1;
#ifdef CONFIG_ACPI_NUMA
pxm = acpi_get_pxm(device->handle);
if (pxm >= 0)
node = pxm_to_node(pxm);
if (node != -1)
set_mp_bus_to_node(busnum, node);
else
#endif
node = get_mp_bus_to_node(busnum);
if (node != -1 && !node_online(node))
node = -1;
/* Allocate per-root-bus (not per bus) arch-specific data.
* TODO: leak; this memory is never freed.
* It's arguable whether it's worth the trouble to care.
*/
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
if (!sd) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (out of memory)\n", domain, busnum);
return NULL;
}
sd->domain = domain;
sd->node = node;
/*
* Maybe the desired pci bus has been already scanned. In such case
* it is unnecessary to scan the pci bus with the given domain,busnum.
*/
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus exits, the content of bus->sysdata will
* be replaced by sd.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
} else {
bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
if (bus) {
get_current_resources(device, busnum, domain, bus);
bus->subordinate = pci_scan_child_bus(bus);
}
}
if (!bus)
kfree(sd);
if (bus && node != -1) {
#ifdef CONFIG_ACPI_NUMA
if (pxm >= 0)
dev_printk(KERN_DEBUG, &bus->dev,
"on NUMA node %d (pxm %d)\n", node, pxm);
#else
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
#endif
}
return bus;
}
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
int ret;
void *sysdata;
struct pci_bus *bus;
if (!pcie || !pcie->dev || !pcie->base)
return -EINVAL;
ret = phy_init(pcie->phy);
if (ret) {
dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
return ret;
}
ret = phy_power_on(pcie->phy);
if (ret) {
dev_err(pcie->dev, "unable to power on PCIe PHY\n");
goto err_exit_phy;
}
iproc_pcie_reset(pcie);
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;
#else
sysdata = pcie;
#endif
bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res);
if (!bus) {
dev_err(pcie->dev, "unable to create PCI root bus\n");
ret = -ENOMEM;
goto err_power_off_phy;
}
pcie->root_bus = bus;
ret = iproc_pcie_check_link(pcie, bus);
if (ret) {
dev_err(pcie->dev, "no PCIe EP device detected\n");
goto err_rm_root_bus;
}
iproc_pcie_enable(pcie);
pci_scan_child_bus(bus);
pci_assign_unassigned_bus_resources(bus);
#ifdef CONFIG_ARM
pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
#endif
pci_bus_add_devices(bus);
return 0;
err_rm_root_bus:
pci_stop_root_bus(bus);
pci_remove_root_bus(bus);
err_power_off_phy:
phy_power_off(pcie->phy);
err_exit_phy:
phy_exit(pcie->phy);
return ret;
}
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
struct device *dev;
int ret;
void *sysdata;
struct pci_bus *bus;
dev = pcie->dev;
ret = devm_request_pci_bus_resources(dev, res);
if (ret)
return ret;
ret = phy_init(pcie->phy);
if (ret) {
dev_err(dev, "unable to initialize PCIe PHY\n");
return ret;
}
ret = phy_power_on(pcie->phy);
if (ret) {
dev_err(dev, "unable to power on PCIe PHY\n");
goto err_exit_phy;
}
switch (pcie->type) {
case IPROC_PCIE_PAXB:
pcie->reg_offsets = iproc_pcie_reg_paxb;
break;
case IPROC_PCIE_PAXC:
pcie->reg_offsets = iproc_pcie_reg_paxc;
break;
default:
dev_err(dev, "incompatible iProc PCIe interface\n");
ret = -EINVAL;
goto err_power_off_phy;
}
iproc_pcie_reset(pcie);
if (pcie->need_ob_cfg) {
ret = iproc_pcie_map_ranges(pcie, res);
if (ret) {
dev_err(dev, "map failed\n");
goto err_power_off_phy;
}
}
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;
#else
sysdata = pcie;
#endif
bus = pci_create_root_bus(dev, 0, &iproc_pcie_ops, sysdata, res);
if (!bus) {
dev_err(dev, "unable to create PCI root bus\n");
ret = -ENOMEM;
goto err_power_off_phy;
}
pcie->root_bus = bus;
ret = iproc_pcie_check_link(pcie, bus);
if (ret) {
dev_err(dev, "no PCIe EP device detected\n");
goto err_rm_root_bus;
}
iproc_pcie_enable(pcie);
if (IS_ENABLED(CONFIG_PCI_MSI))
if (iproc_pcie_msi_enable(pcie))
dev_info(dev, "not using iProc MSI\n");
pci_scan_child_bus(bus);
pci_assign_unassigned_bus_resources(bus);
pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
pci_bus_add_devices(bus);
return 0;
err_rm_root_bus:
pci_stop_root_bus(bus);
pci_remove_root_bus(bus);
err_power_off_phy:
phy_power_off(pcie->phy);
err_exit_phy:
phy_exit(pcie->phy);
return ret;
}