static struct pem_data *pem_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pem_data *data = i2c_get_clientdata(client);
struct pem_data *ret = data;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
int result;
/* Read data string */
result = pem_read_block(client, PEM_READ_DATA_STRING,
data->data_string,
sizeof(data->data_string));
if (unlikely(result < 0)) {
ret = ERR_PTR(result);
goto abort;
}
/* Read input string */
if (data->input_length) {
result = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
data->input_length);
if (unlikely(result < 0)) {
ret = ERR_PTR(result);
goto abort;
}
}
/* Read fan speeds */
if (data->fans_supported) {
result = pem_read_block(client, PEM_READ_FAN_SPEED,
data->fan_speed,
sizeof(data->fan_speed));
if (unlikely(result < 0)) {
ret = ERR_PTR(result);
goto abort;
}
}
i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
data->last_updated = jiffies;
data->valid = 1;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
static int pem_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct pem_data *data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE))
return -ENODEV;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/*
* We use the next two commands to determine if the device is really
* there.
*/
ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
data->firmware_rev, sizeof(data->firmware_rev));
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
if (ret < 0)
return ret;
dev_info(&client->dev, "Firmware revision %d.%d.%d\n",
data->firmware_rev[0], data->firmware_rev[1],
data->firmware_rev[2]);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, &pem_group);
if (ret)
return ret;
/*
* Check if input readings are supported.
* This is the case if we can read input data,
* and if the returned data is not all zeros.
* Note that input alarms are always supported.
*/
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string) - 1);
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2]))
data->input_length = sizeof(data->input_string) - 1;
else if (ret < 0) {
/* Input string is one byte longer for some devices */
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string));
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2] || data->input_string[3]))
data->input_length = sizeof(data->input_string);
}
ret = 0;
if (data->input_length) {
ret = sysfs_create_group(&client->dev.kobj, &pem_input_group);
if (ret)
goto out_remove_groups;
}
/*
* Check if fan speed readings are supported.
* This is the case if we can read fan speed data,
* and if the returned data is not all zeros.
* Note that the fan alarm is always supported.
*/
ret = pem_read_block(client, PEM_READ_FAN_SPEED,
data->fan_speed,
sizeof(data->fan_speed));
if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
data->fan_speed[2] || data->fan_speed[3])) {
data->fans_supported = true;
ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group);
if (ret)
goto out_remove_groups;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto out_remove_groups;
}
return 0;
out_remove_groups:
sysfs_remove_group(&client->dev.kobj, &pem_input_group);
sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
sysfs_remove_group(&client->dev.kobj, &pem_group);
return ret;
}
static int pem_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct pem_data *data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE))
return -ENODEV;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
data->firmware_rev, sizeof(data->firmware_rev));
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
if (ret < 0)
return ret;
dev_info(&client->dev, "Firmware revision %d.%d.%d\n",
data->firmware_rev[0], data->firmware_rev[1],
data->firmware_rev[2]);
ret = sysfs_create_group(&client->dev.kobj, &pem_group);
if (ret)
return ret;
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string) - 1);
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2]))
data->input_length = sizeof(data->input_string) - 1;
else if (ret < 0) {
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string));
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2] || data->input_string[3]))
data->input_length = sizeof(data->input_string);
}
ret = 0;
if (data->input_length) {
ret = sysfs_create_group(&client->dev.kobj, &pem_input_group);
if (ret)
goto out_remove_groups;
}
ret = pem_read_block(client, PEM_READ_FAN_SPEED,
data->fan_speed,
sizeof(data->fan_speed));
if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
data->fan_speed[2] || data->fan_speed[3])) {
data->fans_supported = true;
ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group);
if (ret)
goto out_remove_groups;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto out_remove_groups;
}
return 0;
out_remove_groups:
sysfs_remove_group(&client->dev.kobj, &pem_input_group);
sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
sysfs_remove_group(&client->dev.kobj, &pem_group);
return ret;
}
static int pem_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct pem_data *data;
int ret, idx = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
| I2C_FUNC_SMBUS_WRITE_BYTE))
return -ENODEV;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
mutex_init(&data->update_lock);
/*
* We use the next two commands to determine if the device is really
* there.
*/
ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
data->firmware_rev, sizeof(data->firmware_rev));
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
if (ret < 0)
return ret;
dev_info(dev, "Firmware revision %d.%d.%d\n",
data->firmware_rev[0], data->firmware_rev[1],
data->firmware_rev[2]);
/* sysfs hooks */
data->groups[idx++] = &pem_group;
/*
* Check if input readings are supported.
* This is the case if we can read input data,
* and if the returned data is not all zeros.
* Note that input alarms are always supported.
*/
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string) - 1);
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2]))
data->input_length = sizeof(data->input_string) - 1;
else if (ret < 0) {
/* Input string is one byte longer for some devices */
ret = pem_read_block(client, PEM_READ_INPUT_STRING,
data->input_string,
sizeof(data->input_string));
if (!ret && (data->input_string[0] || data->input_string[1] ||
data->input_string[2] || data->input_string[3]))
data->input_length = sizeof(data->input_string);
}
if (data->input_length)
data->groups[idx++] = &pem_input_group;
/*
* Check if fan speed readings are supported.
* This is the case if we can read fan speed data,
* and if the returned data is not all zeros.
* Note that the fan alarm is always supported.
*/
ret = pem_read_block(client, PEM_READ_FAN_SPEED,
data->fan_speed,
sizeof(data->fan_speed));
if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
data->fan_speed[2] || data->fan_speed[3])) {
data->fans_supported = true;
data->groups[idx++] = &pem_fan_group;
}
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
