Exemple #1
0
/* set MAC link settings according to information from phylib */
static void ax88172a_adjust_link(struct net_device *netdev)
{
	struct phy_device *phydev = netdev->phydev;
	struct usbnet *dev = netdev_priv(netdev);
	struct ax88172a_private *priv = dev->driver_priv;
	u16 mode = 0;

	if (phydev->link) {
		mode = AX88772_MEDIUM_DEFAULT;

		if (phydev->duplex == DUPLEX_HALF)
			mode &= ~AX_MEDIUM_FD;

		if (phydev->speed != SPEED_100)
			mode &= ~AX_MEDIUM_PS;
	}

	if (mode != priv->oldmode) {
		asix_write_medium_mode(dev, mode, 0);
		priv->oldmode = mode;
		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
			   phydev->speed, phydev->duplex, mode);
		phy_print_status(phydev);
	}
}
Exemple #2
0
static void dsa_slave_adjust_link(struct net_device *dev)
{
	struct dsa_slave_priv *p = netdev_priv(dev);
	struct dsa_switch *ds = p->parent;
	unsigned int status_changed = 0;

	if (p->old_link != p->phy->link) {
		status_changed = 1;
		p->old_link = p->phy->link;
	}

	if (p->old_duplex != p->phy->duplex) {
		status_changed = 1;
		p->old_duplex = p->phy->duplex;
	}

	if (p->old_pause != p->phy->pause) {
		status_changed = 1;
		p->old_pause = p->phy->pause;
	}

	if (ds->drv->adjust_link && status_changed)
		ds->drv->adjust_link(ds, p->port, p->phy);

	if (status_changed)
		phy_print_status(p->phy);
}
Exemple #3
0
/*-----------------------------------------------------------------------------
 *  generic link-change handler - should be sufficient for most cases
 *-----------------------------------------------------------------------------*/
static void generic_adjust_link(struct  net_device *dev)
{
	struct fs_enet_private *fep = netdev_priv(dev);
	struct phy_device *phydev = fep->phydev;
	int new_state = 0;

	if (phydev->link) {
		/* adjust to duplex mode */
		if (phydev->duplex != fep->oldduplex) {
			new_state = 1;
			fep->oldduplex = phydev->duplex;
		}

		if (phydev->speed != fep->oldspeed) {
			new_state = 1;
			fep->oldspeed = phydev->speed;
		}

		if (!fep->oldlink) {
			new_state = 1;
			fep->oldlink = 1;
		}

		if (new_state)
			fep->ops->restart(dev);
	} else if (fep->oldlink) {
		new_state = 1;
		fep->oldlink = 0;
		fep->oldspeed = 0;
		fep->oldduplex = -1;
	}

	if (new_state && netif_msg_link(fep))
		phy_print_status(phydev);
}
Exemple #4
0
/**
 * arc_emac_adjust_link - Adjust the PHY link duplex.
 * @ndev:	Pointer to the net_device structure.
 *
 * This function is called to change the duplex setting after auto negotiation
 * is done by the PHY.
 */
static void arc_emac_adjust_link(struct net_device *ndev)
{
	struct arc_emac_priv *priv = netdev_priv(ndev);
	struct phy_device *phy_dev = ndev->phydev;
	unsigned int reg, state_changed = 0;

	if (priv->link != phy_dev->link) {
		priv->link = phy_dev->link;
		state_changed = 1;
	}

	if (priv->speed != phy_dev->speed) {
		priv->speed = phy_dev->speed;
		state_changed = 1;
		if (priv->set_mac_speed)
			priv->set_mac_speed(priv, priv->speed);
	}

	if (priv->duplex != phy_dev->duplex) {
		reg = arc_reg_get(priv, R_CTRL);

		if (phy_dev->duplex == DUPLEX_FULL)
			reg |= ENFL_MASK;
		else
			reg &= ~ENFL_MASK;

		arc_reg_set(priv, R_CTRL, reg);
		priv->duplex = phy_dev->duplex;
		state_changed = 1;
	}

	if (state_changed)
		phy_print_status(phy_dev);
}
Exemple #5
0
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
    struct sh_eth_private *mdp = netdev_priv(ndev);
    struct phy_device *phydev = mdp->phydev;
    u32 ioaddr = ndev->base_addr;
    int new_state = 0;

    if (phydev->link != PHY_DOWN) {
        if (phydev->duplex != mdp->duplex) {
            new_state = 1;
            mdp->duplex = phydev->duplex;
#if defined(CONFIG_CPU_SUBTYPE_SH7763)
            if (mdp->duplex) { /*  FULL */
                ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM,
                          ioaddr + ECMR);
            } else {	/* Half */
                ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM,
                          ioaddr + ECMR);
            }
#endif
        }

        if (phydev->speed != mdp->speed) {
            new_state = 1;
            mdp->speed = phydev->speed;
#if defined(CONFIG_CPU_SUBTYPE_SH7763)
            switch (mdp->speed) {
            case 10: /* 10BASE */
                ctrl_outl(GECMR_10, ioaddr + GECMR);
                break;
            case 100:/* 100BASE */
                ctrl_outl(GECMR_100, ioaddr + GECMR);
                break;
            case 1000: /* 1000BASE */
                ctrl_outl(GECMR_1000, ioaddr + GECMR);
                break;
            default:
                break;
            }
#endif
        }
        if (mdp->link == PHY_DOWN) {
            ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
                      | ECMR_DM, ioaddr + ECMR);
            new_state = 1;
            mdp->link = phydev->link;
        }
    } else if (mdp->link) {
        new_state = 1;
        mdp->link = PHY_DOWN;
        mdp->speed = 0;
        mdp->duplex = -1;
    }

    if (new_state)
        phy_print_status(phydev);
}
Exemple #6
0
static void hip04_adjust_link(struct net_device *ndev)
{
    struct hip04_priv *priv = netdev_priv(ndev);
    struct phy_device *phy = priv->phy;

    if ((priv->speed != phy->speed) || (priv->duplex != phy->duplex)) {
        hip04_config_port(ndev, phy->speed, phy->duplex);
        phy_print_status(phy);
    }
}
static void s6gmac_adjust_link(struct net_device *dev)
{
	struct s6gmac *pd = netdev_priv(dev);
	struct phy_device *phydev = pd->phydev;
	if (pd->link.isup &&
			(!phydev->link ||
			(pd->link.mbit != phydev->speed) ||
			(pd->link.full != phydev->duplex))) {
		pd->link.isup = 0;
		netif_tx_disable(dev);
		if (!phydev->link) {
			netif_carrier_off(dev);
			phy_print_status(phydev);
		}
	}
	if (!pd->link.isup && phydev->link) {
		if (pd->link.full != phydev->duplex) {
			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
			if (phydev->duplex)
				maccfg |= 1 << S6_GMAC_MACCONF2_FULL;
			else
				maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL);
			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
		}

		if (pd->link.giga != (phydev->speed == 1000)) {
			u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5);
			u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
			maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK
				     << S6_GMAC_MACCONF2_IFMODE);
			if (phydev->speed == 1000) {
				fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM;
				maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE
					   << S6_GMAC_MACCONF2_IFMODE;
			} else {
				fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM);
				maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE
					   << S6_GMAC_MACCONF2_IFMODE;
			}
			writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5);
			writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
		}

		if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
			netif_wake_queue(dev);
		s6gmac_linkisup(dev, 1);
	}
}
static inline void s6gmac_linkisup(struct net_device *dev, int isup)
{
	struct s6gmac *pd = netdev_priv(dev);
	struct phy_device *phydev = pd->phydev;

	pd->link.full = phydev->duplex;
	pd->link.giga = (phydev->speed == 1000);
	if (pd->link.mbit != phydev->speed) {
		pd->link.mbit = phydev->speed;
		s6gmac_set_rgmii_txclock(pd);
	}
	pd->link.isup = isup;
	if (isup)
		netif_carrier_on(dev);
	phy_print_status(phydev);
}
Exemple #9
0
static void hisi_femac_adjust_link(struct net_device *dev)
{
	struct hisi_femac_priv *priv = netdev_priv(dev);
	struct phy_device *phy = dev->phydev;
	u32 status = 0;

	if (phy->link)
		status |= MAC_PORTSET_LINKED;
	if (phy->duplex == DUPLEX_FULL)
		status |= MAC_PORTSET_DUPLEX_FULL;
	if (phy->speed == SPEED_100)
		status |= MAC_PORTSET_SPEED_100M;

	if ((status != priv->link_status) &&
	    ((status | priv->link_status) & MAC_PORTSET_LINKED)) {
		writel(status, priv->port_base + MAC_PORTSET);
		priv->link_status = status;
		phy_print_status(phy);
	}
}
Exemple #10
0
static void hieth_adjust_link(struct net_device *dev)
{
	int stat = 0;
	struct hieth_netdev_local *ld = netdev_priv(dev);

	stat |= (ld->phy->link) ? HIETH_LINKED : 0;
	stat |= (ld->phy->duplex == DUPLEX_FULL) ? HIETH_DUP_FULL : 0;
	stat |= (ld->phy->speed == SPEED_100) ? HIETH_SPD_100M : 0;

	if (stat != ld->link_stat) {
		if (ld->phy->link == 0) {
			printk(KERN_INFO "***link down status changed***.\n");
			writel(0x0, ld->iobase + 0x490);
			writel(0x0, ld->iobase + 0x484);
		} else {
			writel(0x1, ld->iobase + 0x490);
			hanbang_asshole();
#ifdef CONFIG_EEE_SUPPORT
			if (eee_available > NO_EEE) {
				int data = ld->driver->eee_enable();
				if (DEBUG)
					printk(KERN_INFO "adjust_link "
						"data:(=2?): %d\n", data);
				if (eee_available == MAC_EEE) {
					writel(0x10, ld->iobase + 0x484);
					/* enable intr */
					writel(0x1f, ld->iobase + 0x480);
				} else
					writel(0x0, ld->iobase + 0x484);

			}
#endif
		}

		hieth_set_linkstat(ld, stat);
		phy_print_status(ld->phy);
		ld->link_stat = stat;
	}
}
Exemple #11
0
static void emac_handle_link_change(struct net_device *dev)
{
	struct emac_board_info *db = netdev_priv(dev);
	struct phy_device *phydev = dev->phydev;
	unsigned long flags;
	int status_change = 0;

	if (phydev->link) {
		if (db->speed != phydev->speed) {
			spin_lock_irqsave(&db->lock, flags);
			db->speed = phydev->speed;
			emac_update_speed(dev);
			spin_unlock_irqrestore(&db->lock, flags);
			status_change = 1;
		}

		if (db->duplex != phydev->duplex) {
			spin_lock_irqsave(&db->lock, flags);
			db->duplex = phydev->duplex;
			emac_update_duplex(dev);
			spin_unlock_irqrestore(&db->lock, flags);
			status_change = 1;
		}
	}

	if (phydev->link != db->link) {
		if (!phydev->link) {
			db->speed = 0;
			db->duplex = -1;
		}
		db->link = phydev->link;

		status_change = 1;
	}

	if (status_change)
		phy_print_status(phydev);
}
static void _cpsw_adjust_link(struct cpsw_slave *slave,
			      struct cpsw_priv *priv, bool *link)
{
	struct phy_device	*phy = slave->phy;
	u32			mac_control = 0;
	u32			slave_port;

	if (!phy)
		return;

	slave_port = cpsw_get_slave_port(priv, slave->slave_num);

	if (phy->link) {
		mac_control = priv->data.mac_control;

		/*                   */
		cpsw_ale_control_set(priv->ale, slave_port,
				     ALE_PORT_STATE, ALE_PORT_STATE_FORWARD);

		if (phy->speed == 1000)
			mac_control |= BIT(7);	/*           */
		if (phy->duplex)
			mac_control |= BIT(0);	/*              */
		*link = true;
	} else {
		mac_control = 0;
		/*                    */
		cpsw_ale_control_set(priv->ale, slave_port,
				     ALE_PORT_STATE, ALE_PORT_STATE_DISABLE);
	}

	if (mac_control != slave->mac_control) {
		phy_print_status(phy);
		__raw_writel(mac_control, &slave->sliver->mac_control);
	}

	slave->mac_control = mac_control;
}
Exemple #13
0
static void bgmac_adjust_link(struct net_device *net_dev)
{
	struct bgmac *bgmac = netdev_priv(net_dev);
	struct phy_device *phy_dev = bgmac->phy_dev;
	bool update = false;

	if (phy_dev->link) {
		if (phy_dev->speed != bgmac->mac_speed) {
			bgmac->mac_speed = phy_dev->speed;
			update = true;
		}

		if (phy_dev->duplex != bgmac->mac_duplex) {
			bgmac->mac_duplex = phy_dev->duplex;
			update = true;
		}
	}

	if (update) {
		bgmac_mac_speed(bgmac);
		phy_print_status(phy_dev);
	}
}
Exemple #14
0
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
	struct sh_eth_private *mdp = netdev_priv(ndev);
	struct phy_device *phydev = mdp->phydev;
	u32 ioaddr = ndev->base_addr;
	int new_state = 0;

	if (phydev->link != PHY_DOWN) {
		if (phydev->duplex != mdp->duplex) {
			new_state = 1;
			mdp->duplex = phydev->duplex;
			if (mdp->cd->set_duplex)
				mdp->cd->set_duplex(ndev);
		}

		if (phydev->speed != mdp->speed) {
			new_state = 1;
			mdp->speed = phydev->speed;
			if (mdp->cd->set_rate)
				mdp->cd->set_rate(ndev);
		}
		if (mdp->link == PHY_DOWN) {
			writel((readl(ioaddr + ECMR) & ~ECMR_TXF)
					| ECMR_DM, ioaddr + ECMR);
			new_state = 1;
			mdp->link = phydev->link;
		}
	} else if (mdp->link) {
		new_state = 1;
		mdp->link = PHY_DOWN;
		mdp->speed = 0;
		mdp->duplex = -1;
	}

	if (new_state)
		phy_print_status(phydev);
}
Exemple #15
0
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
	struct sh_eth_private *mdp = netdev_priv(ndev);
	struct phy_device *phydev = mdp->phydev;
	int new_state = 0;

	if (phydev->link != PHY_DOWN) {
		if (phydev->duplex != mdp->duplex) {
			new_state = 1;
			mdp->duplex = phydev->duplex;
			if (mdp->cd->set_duplex)
				mdp->cd->set_duplex(ndev);
		}

		if (phydev->speed != mdp->speed) {
			new_state = 1;
			mdp->speed = phydev->speed;
			if (mdp->cd->set_rate)
				mdp->cd->set_rate(ndev);
		}
		if (mdp->link == PHY_DOWN) {
			sh_eth_write(ndev,
				(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
			new_state = 1;
			mdp->link = phydev->link;
		}
	} else if (mdp->link) {
		new_state = 1;
		mdp->link = PHY_DOWN;
		mdp->speed = 0;
		mdp->duplex = -1;
	}

	if (new_state && netif_msg_link(mdp))
		phy_print_status(phydev);
}
Exemple #16
0
/* setup netdev link state when PHY link status change and
 * update UMAC and RGMII block when link up
 */
void bcmgenet_mii_setup(struct net_device *dev)
{
	struct bcmgenet_priv *priv = netdev_priv(dev);
	struct phy_device *phydev = priv->phydev;
	u32 reg, cmd_bits = 0;
	bool status_changed = false;

	if (priv->old_link != phydev->link) {
		status_changed = true;
		priv->old_link = phydev->link;
	}

	if (phydev->link) {
		/* check speed/duplex/pause changes */
		if (priv->old_speed != phydev->speed) {
			status_changed = true;
			priv->old_speed = phydev->speed;
		}

		if (priv->old_duplex != phydev->duplex) {
			status_changed = true;
			priv->old_duplex = phydev->duplex;
		}

		if (priv->old_pause != phydev->pause) {
			status_changed = true;
			priv->old_pause = phydev->pause;
		}

		/* done if nothing has changed */
		if (!status_changed)
			return;

		/* speed */
		if (phydev->speed == SPEED_1000)
			cmd_bits = UMAC_SPEED_1000;
		else if (phydev->speed == SPEED_100)
			cmd_bits = UMAC_SPEED_100;
		else
			cmd_bits = UMAC_SPEED_10;
		cmd_bits <<= CMD_SPEED_SHIFT;

		/* duplex */
		if (phydev->duplex != DUPLEX_FULL)
			cmd_bits |= CMD_HD_EN;

		/* pause capability */
		if (!phydev->pause)
			cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE;

		/*
		 * Program UMAC and RGMII block based on established
		 * link speed, duplex, and pause. The speed set in
		 * umac->cmd tell RGMII block which clock to use for
		 * transmit -- 25MHz(100Mbps) or 125MHz(1Gbps).
		 * Receive clock is provided by the PHY.
		 */
		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
		reg &= ~OOB_DISABLE;
		reg |= RGMII_LINK;
		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);

		reg = bcmgenet_umac_readl(priv, UMAC_CMD);
		reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
			       CMD_HD_EN |
			       CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE);
		reg |= cmd_bits;
		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
	} else {
		/* done if nothing has changed */
		if (!status_changed)
			return;

		/* needed for MoCA fixed PHY to reflect correct link status */
		netif_carrier_off(dev);
	}

	phy_print_status(phydev);
}
Exemple #17
0
/* setup netdev link state when PHY link status change and
 * update UMAC and RGMII block when link up
 */
static void bcmgenet_mii_setup(struct net_device *dev)
{
	struct bcmgenet_priv *priv = netdev_priv(dev);
	struct phy_device *phydev = priv->phydev;
	u32 reg, cmd_bits = 0;
	unsigned int status_changed = 0;

	if (priv->old_link != phydev->link) {
		status_changed = 1;
		priv->old_link = phydev->link;
	}

	if (phydev->link) {
		/* program UMAC and RGMII block based on established link
		 * speed, pause, and duplex.
		 * the speed set in umac->cmd tell RGMII block which clock
		 * 25MHz(100Mbps)/125MHz(1Gbps) to use for transmit.
		 * receive clock is provided by PHY.
		 */
		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
		reg &= ~OOB_DISABLE;
		reg |= RGMII_LINK;
		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);

		/* speed */
		if (phydev->speed == SPEED_1000)
			cmd_bits = UMAC_SPEED_1000;
		else if (phydev->speed == SPEED_100)
			cmd_bits = UMAC_SPEED_100;
		else
			cmd_bits = UMAC_SPEED_10;
		cmd_bits <<= CMD_SPEED_SHIFT;

		if (priv->old_duplex != phydev->duplex) {
			status_changed = 1;
			priv->old_duplex = phydev->duplex;
		}

		/* duplex */
		if (phydev->duplex != DUPLEX_FULL)
			cmd_bits |= CMD_HD_EN;

		if (priv->old_pause != phydev->pause) {
			status_changed = 1;
			priv->old_pause = phydev->pause;
		}

		/* pause capability */
		if (!phydev->pause)
			cmd_bits |= CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE;
	}

	if (status_changed) {
		reg = bcmgenet_umac_readl(priv, UMAC_CMD);
		reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
			       CMD_HD_EN |
			       CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE);
		reg |= cmd_bits;
		bcmgenet_umac_writel(priv, reg, UMAC_CMD);

		phy_print_status(phydev);
	}
}
Exemple #18
0
static void bfin_mac_adjust_link(struct net_device *dev)
{
	struct bfin_mac_local *lp = netdev_priv(dev);
	struct phy_device *phydev = lp->phydev;
	unsigned long flags;
	int new_state = 0;

	spin_lock_irqsave(&lp->lock, flags);
	if (phydev->link) {
		/* Now we make sure that we can be in full duplex mode.
		 * If not, we operate in half-duplex mode. */
		if (phydev->duplex != lp->old_duplex) {
			u32 opmode = bfin_read_EMAC_OPMODE();
			new_state = 1;

			if (phydev->duplex)
				opmode |= FDMODE;
			else
				opmode &= ~(FDMODE);

			bfin_write_EMAC_OPMODE(opmode);
			lp->old_duplex = phydev->duplex;
		}

		if (phydev->speed != lp->old_speed) {
#if defined(CONFIG_BFIN_MAC_RMII)
			u32 opmode = bfin_read_EMAC_OPMODE();
			switch (phydev->speed) {
			case 10:
				opmode |= RMII_10;
				break;
			case 100:
				opmode &= ~(RMII_10);
				break;
			default:
				printk(KERN_WARNING
					"%s: Ack!  Speed (%d) is not 10/100!\n",
					DRV_NAME, phydev->speed);
				break;
			}
			bfin_write_EMAC_OPMODE(opmode);
#endif

			new_state = 1;
			lp->old_speed = phydev->speed;
		}

		if (!lp->old_link) {
			new_state = 1;
			lp->old_link = 1;
		}
	} else if (lp->old_link) {
		new_state = 1;
		lp->old_link = 0;
		lp->old_speed = 0;
		lp->old_duplex = -1;
	}

	if (new_state) {
		u32 opmode = bfin_read_EMAC_OPMODE();
		phy_print_status(phydev);
		pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
	}

	spin_unlock_irqrestore(&lp->lock, flags);
}
static void bfin_mac_adjust_link(struct net_device *dev)
{
	struct bfin_mac_local *lp = netdev_priv(dev);
	struct phy_device *phydev = lp->phydev;
	unsigned long flags;
	int new_state = 0;

	spin_lock_irqsave(&lp->lock, flags);
	if (phydev->link) {
		if (phydev->duplex != lp->old_duplex) {
			u32 opmode = bfin_read_EMAC_OPMODE();
			new_state = 1;

			if (phydev->duplex)
				opmode |= FDMODE;
			else
				opmode &= ~(FDMODE);

			bfin_write_EMAC_OPMODE(opmode);
			lp->old_duplex = phydev->duplex;
		}

		if (phydev->speed != lp->old_speed) {
			if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
				u32 opmode = bfin_read_EMAC_OPMODE();
				switch (phydev->speed) {
				case 10:
					opmode |= RMII_10;
					break;
				case 100:
					opmode &= ~RMII_10;
					break;
				default:
					netdev_warn(dev,
						"Ack! Speed (%d) is not 10/100!\n",
						phydev->speed);
					break;
				}
				bfin_write_EMAC_OPMODE(opmode);
			}

			new_state = 1;
			lp->old_speed = phydev->speed;
		}

		if (!lp->old_link) {
			new_state = 1;
			lp->old_link = 1;
		}
	} else if (lp->old_link) {
		new_state = 1;
		lp->old_link = 0;
		lp->old_speed = 0;
		lp->old_duplex = -1;
	}

	if (new_state) {
		u32 opmode = bfin_read_EMAC_OPMODE();
		phy_print_status(phydev);
		pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
	}

	spin_unlock_irqrestore(&lp->lock, flags);
}
Exemple #20
0
static void tc_handle_link_change(struct net_device *dev)
{
	struct tc35815_local *lp = netdev_priv(dev);
	struct phy_device *phydev = dev->phydev;
	unsigned long flags;
	int status_change = 0;

	spin_lock_irqsave(&lp->lock, flags);
	if (phydev->link &&
	    (lp->speed != phydev->speed || lp->duplex != phydev->duplex)) {
		struct tc35815_regs __iomem *tr =
			(struct tc35815_regs __iomem *)dev->base_addr;
		u32 reg;

		reg = tc_readl(&tr->MAC_Ctl);
		reg |= MAC_HaltReq;
		tc_writel(reg, &tr->MAC_Ctl);
		if (phydev->duplex == DUPLEX_FULL)
			reg |= MAC_FullDup;
		else
			reg &= ~MAC_FullDup;
		tc_writel(reg, &tr->MAC_Ctl);
		reg &= ~MAC_HaltReq;
		tc_writel(reg, &tr->MAC_Ctl);

		/*
		 * TX4939 PCFG.SPEEDn bit will be changed on
		 * NETDEV_CHANGE event.
		 */
		/*
		 * WORKAROUND: enable LostCrS only if half duplex
		 * operation.
		 * (TX4939 does not have EnLCarr)
		 */
		if (phydev->duplex == DUPLEX_HALF &&
		    lp->chiptype != TC35815_TX4939)
			tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr,
				  &tr->Tx_Ctl);

		lp->speed = phydev->speed;
		lp->duplex = phydev->duplex;
		status_change = 1;
	}

	if (phydev->link != lp->link) {
		if (phydev->link) {
			/* delayed promiscuous enabling */
			if (dev->flags & IFF_PROMISC)
				tc35815_set_multicast_list(dev);
		} else {
			lp->speed = 0;
			lp->duplex = -1;
		}
		lp->link = phydev->link;

		status_change = 1;
	}
	spin_unlock_irqrestore(&lp->lock, flags);

	if (status_change && netif_msg_link(lp)) {
		phy_print_status(phydev);
		pr_debug("%s: MII BMCR %04x BMSR %04x LPA %04x\n",
			 dev->name,
			 phy_read(phydev, MII_BMCR),
			 phy_read(phydev, MII_BMSR),
			 phy_read(phydev, MII_LPA));
	}
}
Exemple #21
0
/**
 * stmmac_adjust_link
 * @dev: net device structure
 * Description: it adjusts the link parameters.
 */
static void stmmac_adjust_link(struct net_device *dev)
{
	struct stmmac_priv *priv = netdev_priv(dev);
	struct phy_device *phydev = priv->phydev;
	unsigned long flags;
	int new_state = 0;
	unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;

	if (phydev == NULL)
		return;

	DBG(probe, DEBUG, "stmmac_adjust_link: called.  address %d link %d\n",
	    phydev->addr, phydev->link);

	spin_lock_irqsave(&priv->lock, flags);
	if (phydev->link) {
		u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);

		/* Now we make sure that we can be in full duplex mode.
		 * If not, we operate in half-duplex mode. */
		if (phydev->duplex != priv->oldduplex) {
			new_state = 1;
			if (!(phydev->duplex))
				ctrl &= ~priv->hw->link.duplex;
			else
				ctrl |= priv->hw->link.duplex;
			priv->oldduplex = phydev->duplex;
		}
		/* Flow Control operation */
		if (phydev->pause)
			priv->hw->mac->flow_ctrl(priv->ioaddr, phydev->duplex,
						 fc, pause_time);

		if (phydev->speed != priv->speed) {
			new_state = 1;
			switch (phydev->speed) {
			case 1000:
				if (likely(priv->plat->has_gmac))
					ctrl &= ~priv->hw->link.port;
				stmmac_hw_fix_mac_speed(priv);
				break;
			case 100:
			case 10:
				if (priv->plat->has_gmac) {
					ctrl |= priv->hw->link.port;
					if (phydev->speed == SPEED_100) {
						ctrl |= priv->hw->link.speed;
					} else {
						ctrl &= ~(priv->hw->link.speed);
					}
				} else {
					ctrl &= ~priv->hw->link.port;
				}
				stmmac_hw_fix_mac_speed(priv);
				break;
			default:
				if (netif_msg_link(priv))
					pr_warning("%s: Speed (%d) is not 10"
				       " or 100!\n", dev->name, phydev->speed);
				break;
			}

			priv->speed = phydev->speed;
		}

		writel(ctrl, priv->ioaddr + MAC_CTRL_REG);

		if (!priv->oldlink) {
			new_state = 1;
			priv->oldlink = 1;
		}
	} else if (priv->oldlink) {
		new_state = 1;
		priv->oldlink = 0;
		priv->speed = 0;
		priv->oldduplex = -1;
	}

	if (new_state && netif_msg_link(priv))
		phy_print_status(phydev);

	spin_unlock_irqrestore(&priv->lock, flags);

	DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
}