/* pic_init - initialize the 8259A interrupt controllers */
void
pic_init(void) {
did_init = 1;
// mask all interrupts
outb(IO_PIC1 + 1, 0xFF);
outb(IO_PIC2 + 1, 0xFF);
// Set up master (8259A-1)
// ICW1: 0001g0hi
// g: 0 = edge triggering, 1 = level triggering
// h: 0 = cascaded PICs, 1 = master only
// i: 0 = no ICW4, 1 = ICW4 required
outb(IO_PIC1, 0x11);
// ICW2: Vector offset
outb(IO_PIC1 + 1, IRQ_OFFSET);
// ICW3: (master PIC) bit mask of IR lines connected to slaves
// (slave PIC) 3-bit # of slave's connection to master
outb(IO_PIC1 + 1, 1 << IRQ_SLAVE);
// ICW4: 000nbmap
// n: 1 = special fully nested mode
// b: 1 = buffered mode
// m: 0 = slave PIC, 1 = master PIC
// (ignored when b is 0, as the master/slave role
// can be hardwired).
// a: 1 = Automatic EOI mode
// p: 0 = MCS-80/85 mode, 1 = intel x86 mode
outb(IO_PIC1 + 1, 0x3);
// Set up slave (8259A-2)
outb(IO_PIC2, 0x11); // ICW1
outb(IO_PIC2 + 1, IRQ_OFFSET + 8); // ICW2
outb(IO_PIC2 + 1, IRQ_SLAVE); // ICW3
// NB Automatic EOI mode doesn't tend to work on the slave.
// Linux source code says it's "to be investigated".
outb(IO_PIC2 + 1, 0x3); // ICW4
// OCW3: 0ef01prs
// ef: 0x = NOP, 10 = clear specific mask, 11 = set specific mask
// p: 0 = no polling, 1 = polling mode
// rs: 0x = NOP, 10 = read IRR, 11 = read ISR
outb(IO_PIC1, 0x68); // clear specific mask
outb(IO_PIC1, 0x0a); // read IRR by default
outb(IO_PIC2, 0x68); // OCW3
outb(IO_PIC2, 0x0a); // OCW3
if (irq_mask != 0xFFFF) {
pic_setmask(irq_mask);
}
}
void
pic_enable(int irq)
{
pic_setmask(irqmask & ~(1<<irq));
}
void
pic_enable(unsigned int irq) {
pic_setmask(irq_mask & ~(1 << irq));
}
