/* common code for exec() methods */
static int pose_slide_exec_common(bContext *C, wmOperator *op, tPoseSlideOp *pso)
{
/* settings should have been set up ok for applying, so just apply! */
pose_slide_apply(C, pso);
/* insert keyframes if needed */
pose_slide_autoKeyframe(C, pso);
/* cleanup and done */
pose_slide_exit(op);
return OPERATOR_FINISHED;
}
/* common code for invoke() methods */
static int pose_slide_invoke_common(bContext *C, wmOperator *op, tPoseSlideOp *pso)
{
tPChanFCurveLink *pfl;
AnimData *adt = pso->ob->adt;
wmWindow *win = CTX_wm_window(C);
/* for each link, add all its keyframes to the search tree */
for (pfl = pso->pfLinks.first; pfl; pfl = pfl->next) {
LinkData *ld;
/* do this for each F-Curve */
for (ld = pfl->fcurves.first; ld; ld = ld->next) {
FCurve *fcu = (FCurve *)ld->data;
fcurve_to_keylist(adt, fcu, &pso->keys, NULL);
}
}
/* consolidate these keyframes, and figure out the nearest ones */
BLI_dlrbTree_linkedlist_sync(&pso->keys);
/* cancel if no keyframes found... */
if (pso->keys.root) {
ActKeyColumn *ak;
float cframe = (float)pso->cframe;
/* firstly, check if the current frame is a keyframe... */
ak = (ActKeyColumn *)BLI_dlrbTree_search_exact(&pso->keys, compare_ak_cfraPtr, &cframe);
if (ak == NULL) {
/* current frame is not a keyframe, so search */
ActKeyColumn *pk = (ActKeyColumn *)BLI_dlrbTree_search_prev(&pso->keys, compare_ak_cfraPtr, &cframe);
ActKeyColumn *nk = (ActKeyColumn *)BLI_dlrbTree_search_next(&pso->keys, compare_ak_cfraPtr, &cframe);
/* new set the frames */
/* prev frame */
pso->prevFrame = (pk) ? (pk->cfra) : (pso->cframe - 1);
RNA_int_set(op->ptr, "prev_frame", pso->prevFrame);
/* next frame */
pso->nextFrame = (nk) ? (nk->cfra) : (pso->cframe + 1);
RNA_int_set(op->ptr, "next_frame", pso->nextFrame);
}
else {
/* current frame itself is a keyframe, so just take keyframes on either side */
/* prev frame */
pso->prevFrame = (ak->prev) ? (ak->prev->cfra) : (pso->cframe - 1);
RNA_int_set(op->ptr, "prev_frame", pso->prevFrame);
/* next frame */
pso->nextFrame = (ak->next) ? (ak->next->cfra) : (pso->cframe + 1);
RNA_int_set(op->ptr, "next_frame", pso->nextFrame);
}
}
else {
BKE_report(op->reports, RPT_ERROR, "No keyframes to slide between");
pose_slide_exit(op);
return OPERATOR_CANCELLED;
}
/* initial apply for operator... */
/* TODO: need to calculate percentage for initial round too... */
pose_slide_apply(C, pso);
/* depsgraph updates + redraws */
pose_slide_refresh(C, pso);
/* set cursor to indicate modal */
WM_cursor_modal_set(win, BC_EW_SCROLLCURSOR);
/* header print */
pose_slide_draw_status(pso);
/* add a modal handler for this operator */
WM_event_add_modal_handler(C, op);
return OPERATOR_RUNNING_MODAL;
}
/* common code for modal() */
static int pose_slide_modal(bContext *C, wmOperator *op, const wmEvent *event)
{
tPoseSlideOp *pso = op->customdata;
wmWindow *win = CTX_wm_window(C);
switch (event->type) {
case LEFTMOUSE: /* confirm */
case RETKEY:
{
/* return to normal cursor and header status */
ED_area_headerprint(pso->sa, NULL);
WM_cursor_modal_restore(win);
/* insert keyframes as required... */
pose_slide_autoKeyframe(C, pso);
pose_slide_exit(op);
/* done! */
return OPERATOR_FINISHED;
}
case ESCKEY: /* cancel */
case RIGHTMOUSE:
{
/* return to normal cursor and header status */
ED_area_headerprint(pso->sa, NULL);
WM_cursor_modal_restore(win);
/* reset transforms back to original state */
pose_slide_reset(pso);
/* depsgraph updates + redraws */
pose_slide_refresh(C, pso);
/* clean up temp data */
pose_slide_exit(op);
/* canceled! */
return OPERATOR_CANCELLED;
}
case MOUSEMOVE: /* calculate new position */
{
/* calculate percentage based on position of mouse (we only use x-axis for now.
* since this is more convenient for users to do), and store new percentage value
*/
pso->percentage = (event->x - pso->ar->winrct.xmin) / ((float)pso->ar->winx);
RNA_float_set(op->ptr, "percentage", pso->percentage);
/* update percentage indicator in header */
pose_slide_draw_status(pso);
/* reset transforms (to avoid accumulation errors) */
pose_slide_reset(pso);
/* apply... */
pose_slide_apply(C, pso);
break;
}
default: /* unhandled event (maybe it was some view manip? */
/* allow to pass through */
return OPERATOR_RUNNING_MODAL | OPERATOR_PASS_THROUGH;
}
/* still running... */
return OPERATOR_RUNNING_MODAL;
}
/* common code for modal() */
static int pose_slide_modal(bContext *C, wmOperator *op, const wmEvent *event)
{
tPoseSlideOp *pso = op->customdata;
wmWindow *win = CTX_wm_window(C);
const bool has_numinput = hasNumInput(&pso->num);
switch (event->type) {
case LEFTMOUSE: /* confirm */
case RETKEY:
case PADENTER:
{
/* return to normal cursor and header status */
ED_area_headerprint(pso->sa, NULL);
WM_cursor_modal_restore(win);
/* insert keyframes as required... */
pose_slide_autoKeyframe(C, pso);
pose_slide_exit(op);
/* done! */
return OPERATOR_FINISHED;
}
case ESCKEY: /* cancel */
case RIGHTMOUSE:
{
/* return to normal cursor and header status */
ED_area_headerprint(pso->sa, NULL);
WM_cursor_modal_restore(win);
/* reset transforms back to original state */
pose_slide_reset(pso);
/* depsgraph updates + redraws */
pose_slide_refresh(C, pso);
/* clean up temp data */
pose_slide_exit(op);
/* canceled! */
return OPERATOR_CANCELLED;
}
case MOUSEMOVE: /* calculate new position */
{
/* only handle mousemove if not doing numinput */
if (has_numinput == false) {
/* update percentage based on position of mouse */
pose_slide_mouse_update_percentage(pso, op, event);
/* update percentage indicator in header */
pose_slide_draw_status(pso);
/* reset transforms (to avoid accumulation errors) */
pose_slide_reset(pso);
/* apply... */
pose_slide_apply(C, pso);
}
break;
}
default:
if ((event->val == KM_PRESS) && handleNumInput(C, &pso->num, event)) {
float value;
/* Grab percentage from numeric input, and store this new value for redo
* NOTE: users see ints, while internally we use a 0-1 float
*/
value = pso->percentage * 100.0f;
applyNumInput(&pso->num, &value);
pso->percentage = value / 100.0f;
CLAMP(pso->percentage, 0.0f, 1.0f);
RNA_float_set(op->ptr, "percentage", pso->percentage);
/* update percentage indicator in header */
pose_slide_draw_status(pso);
/* reset transforms (to avoid accumulation errors) */
pose_slide_reset(pso);
/* apply... */
pose_slide_apply(C, pso);
break;
}
else {
/* unhandled event - maybe it was some view manip? */
/* allow to pass through */
return OPERATOR_RUNNING_MODAL | OPERATOR_PASS_THROUGH;
}
}
/* still running... */
return OPERATOR_RUNNING_MODAL;
}