END_TEST
START_TEST (inet_set_socket_opts_test) {
int sockfd = -1, port = INPORT_ANY, res;
conn_t *conn;
struct tcp_keepalive keepalive;
res = pr_inet_set_socket_opts(NULL, NULL, 1, 2, NULL);
fail_unless(res < 0, "Failed to handle null arguments");
fail_unless(errno == EINVAL, "Expected EINVAL (%d), got %s (%d)", EINVAL,
strerror(errno), errno);
conn = pr_inet_create_conn(p, sockfd, NULL, port, FALSE);
fail_unless(conn != NULL, "Failed to create conn: %s", strerror(errno));
res = pr_inet_set_socket_opts(p, conn, 1, 2, NULL);
fail_unless(res == 0, "Failed to set socket opts: %s", strerror(errno));
res = pr_inet_set_socket_opts(p, conn, INT_MAX, INT_MAX, NULL);
fail_unless(res == 0, "Failed to set socket opts: %s", strerror(errno));
keepalive.keepalive_enabled = 1;
keepalive.keepalive_idle = 1;
keepalive.keepalive_count = 2;
keepalive.keepalive_intvl = 3;
res = pr_inet_set_socket_opts(p, conn, 1, 2, &keepalive);
fail_unless(res == 0, "Failed to set socket opts: %s", strerror(errno));
pr_inet_close(p, conn);
}
END_TEST
START_TEST (inet_set_socket_opts_test) {
int sockfd = -1, port = INPORT_ANY, res;
conn_t *conn;
res = pr_inet_set_socket_opts(NULL, NULL, 1, 2, NULL);
fail_unless(res < 0, "Failed to handle null arguments");
fail_unless(errno == EINVAL, "Expected EINVAL (%d), got %s (%d)", EINVAL,
strerror(errno), errno);
conn = pr_inet_create_conn(p, sockfd, NULL, port, FALSE);
fail_unless(conn != NULL, "Failed to create conn: %s", strerror(errno));
res = pr_inet_set_socket_opts(p, conn, 1, 2, NULL);
fail_unless(res == 0, "Failed to set socket opts: %s", strerror(errno));
pr_inet_close(p, conn);
}
static int data_active_open(char *reason, off_t size) {
conn_t *c;
int rev;
pr_netaddr_t *bind_addr;
if (!reason && session.xfer.filename)
reason = session.xfer.filename;
if (pr_netaddr_get_family(session.c->local_addr) == pr_netaddr_get_family(session.c->remote_addr)) {
bind_addr = session.c->local_addr;
} else {
/* In this scenario, the server has an IPv6 socket, but the remote client
* is an IPv4 (or IPv4-mapped IPv6) peer.
*/
bind_addr = pr_netaddr_v6tov4(session.xfer.p, session.c->local_addr);
}
session.d = pr_inet_create_conn(session.pool, -1, bind_addr,
session.c->local_port-1, TRUE);
/* Set the "stalled" timer, if any, to prevent the connection
* open from taking too long
*/
if (timeout_stalled) {
pr_timer_add(timeout_stalled, PR_TIMER_STALLED, NULL, stalled_timeout_cb,
"TimeoutStalled");
}
rev = pr_netaddr_set_reverse_dns(ServerUseReverseDNS);
/* Protocol and socket options should be set before handshaking. */
if (session.xfer.direction == PR_NETIO_IO_RD) {
pr_inet_set_socket_opts(session.d->pool, session.d,
(main_server->tcp_rcvbuf_override ? main_server->tcp_rcvbuf_len : 0), 0);
} else {
pr_inet_set_socket_opts(session.d->pool, session.d,
0, (main_server->tcp_sndbuf_override ? main_server->tcp_sndbuf_len : 0));
}
/* Make sure that the necessary socket options are set on the socket prior
* to the call to connect(2).
*/
pr_inet_set_proto_opts(session.pool, session.d, main_server->tcp_mss_len, 0,
IPTOS_THROUGHPUT, 1);
pr_inet_generate_socket_event("core.data-connect", main_server,
session.d->local_addr, session.d->listen_fd);
if (pr_inet_connect(session.d->pool, session.d, &session.data_addr,
session.data_port) == -1) {
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
c = pr_inet_openrw(session.pool, session.d, NULL, PR_NETIO_STRM_DATA,
session.d->listen_fd, -1, -1, TRUE);
pr_netaddr_set_reverse_dns(rev);
if (c) {
pr_log_debug(DEBUG4, "active data connection opened - local : %s:%d",
pr_netaddr_get_ipstr(session.d->local_addr), session.d->local_port);
pr_log_debug(DEBUG4, "active data connection opened - remote : %s:%d",
pr_netaddr_get_ipstr(session.d->remote_addr), session.d->remote_port);
if (session.xfer.xfer_type != STOR_UNIQUE) {
if (size)
pr_response_send(R_150, _("Opening %s mode data connection for %s "
"(%" PR_LU " bytes)"), MODE_STRING, reason, (pr_off_t) size);
else
pr_response_send(R_150, _("Opening %s mode data connection for %s"),
MODE_STRING, reason);
} else {
/* Format of 150 responses for STOU is explicitly dictated by
* RFC 1123:
*
* 4.1.2.9 STOU Command: RFC-959 Section 4.1.3
*
* The STOU command stores into a uniquely named file. When it
* receives an STOU command, a Server-FTP MUST return the
* actual file name in the "125 Transfer Starting" or the "150
* Opening Data Connection" message that precedes the transfer
* (the 250 reply code mentioned in RFC-959 is incorrect). The
* exact format of these messages is hereby defined to be as
* follows:
*
* 125 FILE: pppp
* 150 FILE: pppp
*
* where pppp represents the unique pathname of the file that
* will be written.
*/
pr_response_send(R_150, "FILE: %s", reason);
}
pr_inet_close(session.pool, session.d);
pr_inet_set_nonblock(session.pool, session.d);
session.d = c;
return 0;
}
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
static int data_pasv_open(char *reason, off_t size) {
conn_t *c;
int rev;
if (!reason && session.xfer.filename)
reason = session.xfer.filename;
/* Set the "stalled" timer, if any, to prevent the connection
* open from taking too long
*/
if (timeout_stalled) {
pr_timer_add(timeout_stalled, PR_TIMER_STALLED, NULL, stalled_timeout_cb,
"TimeoutStalled");
}
/* We save the state of our current disposition for doing reverse
* lookups, and then set it to what the configuration wants it to
* be.
*/
rev = pr_netaddr_set_reverse_dns(ServerUseReverseDNS);
/* Protocol and socket options should be set before handshaking. */
if (session.xfer.direction == PR_NETIO_IO_RD) {
pr_inet_set_socket_opts(session.d->pool, session.d,
(main_server->tcp_rcvbuf_override ? main_server->tcp_rcvbuf_len : 0), 0);
} else {
pr_inet_set_socket_opts(session.d->pool, session.d,
0, (main_server->tcp_sndbuf_override ? main_server->tcp_sndbuf_len : 0));
}
c = pr_inet_accept(session.pool, session.d, session.c, -1, -1, TRUE);
pr_netaddr_set_reverse_dns(rev);
if (c && c->mode != CM_ERROR) {
pr_inet_close(session.pool, session.d);
pr_inet_set_nonblock(session.pool, c);
session.d = c;
pr_log_debug(DEBUG4, "passive data connection opened - local : %s:%d",
pr_netaddr_get_ipstr(session.d->local_addr), session.d->local_port);
pr_log_debug(DEBUG4, "passive data connection opened - remote : %s:%d",
pr_netaddr_get_ipstr(session.d->remote_addr), session.d->remote_port);
if (session.xfer.xfer_type != STOR_UNIQUE) {
if (size) {
pr_response_send(R_150, _("Opening %s mode data connection for %s "
"(%" PR_LU " bytes)"), MODE_STRING, reason, (pr_off_t) size);
} else {
pr_response_send(R_150, _("Opening %s mode data connection for %s"),
MODE_STRING, reason);
}
} else {
/* Format of 150 responses for STOU is explicitly dictated by
* RFC 1123:
*
* 4.1.2.9 STOU Command: RFC-959 Section 4.1.3
*
* The STOU command stores into a uniquely named file. When it
* receives an STOU command, a Server-FTP MUST return the
* actual file name in the "125 Transfer Starting" or the "150
* Opening Data Connection" message that precedes the transfer
* (the 250 reply code mentioned in RFC-959 is incorrect). The
* exact format of these messages is hereby defined to be as
* follows:
*
* 125 FILE: pppp
* 150 FILE: pppp
*
* where pppp represents the unique pathname of the file that
* will be written.
*/
pr_response_send(R_150, "FILE: %s", reason);
}
return 0;
}
/* Check for error conditions. */
if (c && c->mode == CM_ERROR)
pr_log_pri(PR_LOG_ERR, "Error: unable to accept an incoming data "
"connection (%s)", strerror(c->xerrno));
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
static int data_active_open(char *reason, off_t size) {
conn_t *c;
int bind_port, rev;
pr_netaddr_t *bind_addr;
unsigned char *root_revoke = NULL;
if (!reason && session.xfer.filename)
reason = session.xfer.filename;
if (pr_netaddr_get_family(session.c->local_addr) == pr_netaddr_get_family(session.c->remote_addr)) {
bind_addr = session.c->local_addr;
} else {
/* In this scenario, the server has an IPv6 socket, but the remote client
* is an IPv4 (or IPv4-mapped IPv6) peer.
*/
bind_addr = pr_netaddr_v6tov4(session.xfer.p, session.c->local_addr);
}
/* Default source port to which to bind for the active transfer, as
* per RFC959.
*/
bind_port = session.c->local_port-1;
/* A RootRevoke value of 0 indicates 'false', 1 indicates 'true', and
* 2 indicates 'NonCompliantActiveTransfer'. We change the source port for
* a RootRevoke value of 2.
*/
root_revoke = get_param_ptr(TOPLEVEL_CONF, "RootRevoke", FALSE);
if (root_revoke != NULL &&
*root_revoke == 2) {
bind_port = INPORT_ANY;
}
session.d = pr_inet_create_conn(session.pool, -1, bind_addr, bind_port, TRUE);
/* Default remote address to which to connect for an active transfer,
* if the client has not specified a different address via PORT/EPRT,
* as per RFC 959.
*/
if (pr_netaddr_get_family(&session.data_addr) == AF_UNSPEC) {
pr_log_debug(DEBUG6, "Client has not sent previous PORT/EPRT command, "
"defaulting to %s#%u for active transfer",
pr_netaddr_get_ipstr(session.c->remote_addr), session.c->remote_port);
pr_netaddr_set_family(&session.data_addr, pr_netaddr_get_family(session.c->remote_addr));
pr_netaddr_set_sockaddr(&session.data_addr, pr_netaddr_get_sockaddr(session.c->remote_addr));
}
/* Set the "stalled" timer, if any, to prevent the connection
* open from taking too long
*/
if (timeout_stalled) {
pr_timer_add(timeout_stalled, PR_TIMER_STALLED, NULL, stalled_timeout_cb,
"TimeoutStalled");
}
rev = pr_netaddr_set_reverse_dns(ServerUseReverseDNS);
/* Protocol and socket options should be set before handshaking. */
if (session.xfer.direction == PR_NETIO_IO_RD) {
pr_inet_set_socket_opts(session.d->pool, session.d,
(main_server->tcp_rcvbuf_override ? main_server->tcp_rcvbuf_len : 0), 0,
main_server->tcp_keepalive);
} else {
pr_inet_set_socket_opts(session.d->pool, session.d,
0, (main_server->tcp_sndbuf_override ? main_server->tcp_sndbuf_len : 0),
main_server->tcp_keepalive);
}
/* Make sure that the necessary socket options are set on the socket prior
* to the call to connect(2).
*/
pr_inet_set_proto_opts(session.pool, session.d, main_server->tcp_mss_len, 0,
IPTOS_THROUGHPUT, 1);
pr_inet_generate_socket_event("core.data-connect", main_server,
session.d->local_addr, session.d->listen_fd);
if (pr_inet_connect(session.d->pool, session.d, &session.data_addr,
session.data_port) == -1) {
pr_log_debug(DEBUG6,
"Error connecting to %s#%u for active data transfer: %s",
pr_netaddr_get_ipstr(&session.data_addr), session.data_port,
strerror(session.d->xerrno));
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
errno = session.d->xerrno;
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}
c = pr_inet_openrw(session.pool, session.d, NULL, PR_NETIO_STRM_DATA,
session.d->listen_fd, -1, -1, TRUE);
pr_netaddr_set_reverse_dns(rev);
if (c) {
pr_log_debug(DEBUG4, "active data connection opened - local : %s:%d",
pr_netaddr_get_ipstr(session.d->local_addr), session.d->local_port);
pr_log_debug(DEBUG4, "active data connection opened - remote : %s:%d",
pr_netaddr_get_ipstr(session.d->remote_addr), session.d->remote_port);
if (session.xfer.xfer_type != STOR_UNIQUE) {
if (size) {
pr_response_send(R_150, _("Opening %s mode data connection for %s "
"(%" PR_LU " bytes)"), MODE_STRING, reason, (pr_off_t) size);
} else {
pr_response_send(R_150, _("Opening %s mode data connection for %s"),
MODE_STRING, reason);
}
} else {
/* Format of 150 responses for STOU is explicitly dictated by
* RFC 1123:
*
* 4.1.2.9 STOU Command: RFC-959 Section 4.1.3
*
* The STOU command stores into a uniquely named file. When it
* receives an STOU command, a Server-FTP MUST return the
* actual file name in the "125 Transfer Starting" or the "150
* Opening Data Connection" message that precedes the transfer
* (the 250 reply code mentioned in RFC-959 is incorrect). The
* exact format of these messages is hereby defined to be as
* follows:
*
* 125 FILE: pppp
* 150 FILE: pppp
*
* where pppp represents the unique pathname of the file that
* will be written.
*/
pr_response_send(R_150, "FILE: %s", reason);
}
pr_inet_close(session.pool, session.d);
pr_inet_set_nonblock(session.pool, session.d);
session.d = c;
return 0;
}
pr_response_add_err(R_425, _("Unable to build data connection: %s"),
strerror(session.d->xerrno));
errno = session.d->xerrno;
destroy_pool(session.d->pool);
session.d = NULL;
return -1;
}