/***********************************************************
* Function:
* Description:
* Input:
* Input:
* Output:
* Return:
* Others:
***********************************************************/
static void rt_thread_entry_sd_test( void* parameter )
{
FRESULT res;
char tempbuf[64];
rt_sem_take( &sem_dataflash, RT_TICK_PER_SECOND * FLASH_SEM_DELAY );
SPI_Configuration();
res = SD_Init();
if(0 == res)
{
rt_kprintf("\r\n SD CARD INIT OK!");
memset(tempbuf,0,sizeof(tempbuf));
SD_GetCID(tempbuf);
rt_kprintf("\r\n CID=");
printf_hex_data(tempbuf, 16);
SD_GetCSD(tempbuf);
rt_kprintf("\r\n SID=");
printf_hex_data(tempbuf, 16);
rt_kprintf("\r\n SD 容量=%d",SD_GetCapacity());
}
else
{
rt_kprintf("\r\n SD CARD INIT ERR = %d",res);
}
if(0 == f_mount(MMC, &fs))
{
rt_kprintf("\r\n f_mount SD OK!");
}
rt_sem_release(&sem_dataflash);
while( 1 )
{
rt_thread_delay( RT_TICK_PER_SECOND / 20 );
}
}
/*********************************************************************************
*函数名称:void param_out_ex(char * sect, char * id )
*功能描述:将ini文件参数输出到标准输出设备，如果参数id为空则输出所有参数
*输 入: section :ini文件参数对应的的section
id :要输出的参数名称，不包含前面的"id_"
*输 出: 从标准输出输出参数
*返 回 值:none
*---------------------------------------------------------------------------------
* @修改人 修改时间 修改内容
* 白养民 2015-06-08 创建
*********************************************************************************/
void param_out_ex(char * section, char * id )
{
int i,i_sect;
uint32_t u32data;
uint8_t *p;
char buffer[64];
//param_load_addr(&jt808_param,ADDR_DF_PARAM_MAIN);
for( i_sect = 0; i_sect < sizeof( tbl_ini_lookup ) / sizeof( struct _st_tbl_ini_lookup ); i_sect++ )
{
if((strlen(section) == 0)||(strncmp(section,tbl_ini_lookup[i_sect].section,strlen(tbl_ini_lookup[i_sect].section)) == 0))
{
for( i = 0; i < tbl_ini_lookup[i_sect].param_size / sizeof( st_tbl_id_lookup ); i++ )
{
//if(( id == tbl_id_lookup[i].id ) ||( 0 == id ))
if((strncmp( id ,tbl_ini_lookup[i_sect].param[i].id, strlen(tbl_ini_lookup[i_sect].param[i].id) ) == 0) ||( 0 == strlen(id) ))
{
printf("\r\n %s.id_%s = ", tbl_ini_lookup[i_sect].section, tbl_ini_lookup[i_sect].param[i].id );
switch(tbl_ini_lookup[i_sect].param[i].type)
{
case TYPE_BYTE:
case TYPE_WORD:
case TYPE_DWORD:
if(tbl_ini_lookup[i_sect].param[i].type == TYPE_BYTE)
{
u32data=*tbl_ini_lookup[i_sect].param[i].val;
}
else if(tbl_ini_lookup[i_sect].param[i].type == TYPE_WORD)
{
u32data=*(uint16_t *)tbl_ini_lookup[i_sect].param[i].val;
}
else
{
u32data=*(uint32_t *)tbl_ini_lookup[i_sect].param[i].val;
}
printf("%u;",u32data);
break;
case TYPE_CAN:
p = tbl_ini_lookup[i_sect].param[i].val;
printf_hex_data(p, 8);
break;
/*
case TYPE_STR:
memset(buffer,0,sizeof(buffer));
memcpy(buffer,tbl_id_lookup[i].val,32);
rt_kprintf("\"%s\";",buffer);
break;
*/
default :
memset(buffer,0,sizeof(buffer));
memcpy(buffer,tbl_ini_lookup[i_sect].param[i].val,tbl_ini_lookup[i_sect].param[i].type);
printf("\"%s\";",buffer);
break;
}
}
}
}
}
printf("\r\n" );
}
/*
补报数据更新原先的并读取新纪录
每次收到中心应答后调用
每次重新拨号成功后都要从新确认一下
区分首次读还是上报中的读记录
使用0704上报，要拼包
*/
uint8_t jt808_report_get( void )
{
GPS_REPORT_HEAD head;
uint8_t buf[1024]; /*单包上报的字节不大于256*/
uint32_t i;
uint32_t addr;
uint16_t get_size; /*获取记录的大小*/
uint16_t pos;
uint8_t read_count; /*要读取的记录数*/
uint32_t *p_addr;
if( report_count == 0 ) /*没有有未上报记录*/
{
return 0;
}
if(( gsm_socket[0].state != CONNECTED )||(jt808_state != JT808_REPORT)) /*不在线*/
{
return 0;
}
rt_sem_take( &sem_dataflash, RT_TICK_PER_SECOND * FLASH_SEM_DELAY );
/*批量查找记录*/
addr = report_get_addr;
report_get_count = 0;
get_size = 3;
pos = 3; /*0x0704数据包，开始的偏移*/
read_count = report_count; /*还没有报的记录总数*/
if( report_count > sizeof(report_addr)/sizeof(uint32_t) ) /*最多1次上报10条记录 303字节*/
{
read_count = sizeof(report_addr)/sizeof(uint32_t);
}
for( i = 0; i < ADDR_DF_POSTREPORT_SECT * 64; i++ ) /*每记录64字节,每sector(4096Byte)有64记录*/
{
sst25_read( addr, (uint8_t*)&head, sizeof( GPS_REPORT_HEAD ) );
if( head.mn == 0x474E5353 ) /*有效记录*/
{
if( head.attr >= ATTR_ONNET_NOREPORT ) /*还没有发送*/
{
rt_kprintf("\r\njt808_report_get addr=%X",addr);
rt_kprintf(" head=");
printf_hex_data((const u8 *)&head,sizeof(head));
///盲区补报数据用命令0x0704，但是只有公共货运平台支持该命令
//判断需要发送的总长度是否超过单包发送的最大长度
if( ( pos + head.len + 2 ) >= JT808_PACKAGE_MAX )
{
break;
}
buf[pos++] = head.len >> 8;
buf[pos++] = head.len;
sst25_read( addr + 12, buf + pos, head.len );
pos += ( head.len );
report_addr[report_get_count] = addr;
report_get_count++;
if( report_get_count == read_count ) /*收到指定条数数据*/
{
break;
}
#ifndef GPS_GGHYPT
break;
#endif
if( report_trans_normal ) ///正常发送数据用命令0x0200
{
break;
}
}
addr += ( 12 + head.len + 63 ); //加63是为了取一个比较大的值
addr &= 0xFFFFFFC0; //指向下一个地址
}
else
{
/*
上报信息收到响应,通用应答 0x8001
*/
static JT808_MSG_STATE jt808_report_response( JT808_TX_NODEDATA * nodedata, uint8_t *pmsg )
{
uint8_t * msg = pmsg + 12;
uint16_t ack_id;
uint16_t ack_seq;
uint8_t ack_res;
uint32_t addr;
GPS_REPORT_HEAD head;
uint32_t i;
ack_seq = ( msg[0] << 8 ) | msg[1];
ack_id = ( msg[2] << 8 ) | msg[3];
ack_res = *( msg + 4 );
rt_kprintf("\r\n JT808 TX 0x0200 RESPONSE_1");
if( ack_res == 0 )
{
rt_kprintf("_2");
rt_sem_take( &sem_dataflash, RT_TICK_PER_SECOND * FLASH_SEM_DELAY );
if( ack_id == 0x0200 ) /*在线上报*/
{
rt_kprintf("_3");
addr = *( (uint32_t*)( nodedata->user_para ) );
sst25_read( addr, (uint8_t*)&head, sizeof( GPS_REPORT_HEAD ) );
rt_kprintf(" write addr=%X",addr);
rt_kprintf(" head=");
printf_hex_data((const u8 *)&head,sizeof(head));
if(( head.mn == 0x474E5353 )&&(head.attr >= ATTR_ONNET_NOREPORT))
{
head.attr &= 0x7F; /*最高位置0*/
sst25_write_through( addr, (uint8_t*)&head, sizeof( GPS_REPORT_HEAD ) );
report_get_addr = addr;
if( report_count )
{
report_count--;
}
}
//nodedata->user_para = RT_NULL; /*传递进来只是指明flash地址，并不是要释放*/
}
else if( ack_id == 0x0704 ) /*批量上报*/
{
for( i = 0; i < report_get_count; i++ )
{
sst25_read( report_addr[i], (uint8_t*)&head, sizeof( GPS_REPORT_HEAD ) );
if(( head.mn == 0x474E5353 )&&(head.attr >= ATTR_ONNET_NOREPORT))
{
head.attr &= 0x7F; /*最高位置0*/
sst25_write_through( report_addr[i], (uint8_t*)&head, sizeof( GPS_REPORT_HEAD ) );
report_get_addr = report_addr[i];
if( report_count )
{
report_count--;
}
}
}
}
rt_sem_release( &sem_dataflash );
}
return ACK_OK;
}
/******************************************************************************
* function : main()
* Description : video venc sample
******************************************************************************/
int disk_pro_test01(int argc, char *argv[])
{
s32 s32Ret;
int i, strt, ch_out;
int cmd = 4;
long long sector = 0;
char buf[512];
int fd,size,len;
char *buf_wr="Hello! I'm writing to this file!";
cmd = atoi(argv[1]);
sector = atoi(argv[2]);
printf("sector=%d",sector);
sector *= 512;
//getchar();
/*0：成功，-1：失败*/
////////////////////////////////////////
if(cmd&& (argc<4))
{
printf("Please input param3( write string data. )!\n");
return FALSE;
}
fd = open("/dev/sda2", O_RDWR );
if(fd < 0)
{
printf("open: ERROR!");
return FALSE;
}
else
printf("open file OK: %d\n",fd);
/*
while(sector)
{
if(sector>0xFFFFFFFF)
{
lseek64(fd,0xFFFFFFFF,SEEK_CUR);
sector -= 0xFFFFFFFF;
}
else
{
lseek64(fd,sector,SEEK_CUR);
sector = 0;
}
}
*/
lseek64(fd,sector,SEEK_SET);
if(cmd)
{
size=write(fd,argv[3],strlen(argv[3]));
if(size < 0)
{
printf("wtrite: ERROR!");
close(fd);
return FALSE;
}
}
else
{
memset(buf,0,sizeof(buf));
size=read(fd,buf,128);
if(size < 0)
{
printf("read: ERROR!");
close(fd);
return FALSE;
}
printf("Read OK\n");
printf_hex_data(buf,128);
printf("STRING=%s",buf);
}
//len = strlen(buf_wr);
//buf_wr[10] = '\0';
//if((size = write( fd, buf_wr, len)) < 0)
//perror("write:");
//exit(1);
close(fd);
////////////////////////////////////////
return FALSE;
}
