static __s32
pwm_set_duty_ns(__u32 channel, __u32 duty_ns)
{
__u32 active_cycle = 0;
__u32 tmp;
active_cycle = (duty_ns * gdisp.pwm[channel].entire_cycle +
(gdisp.pwm[channel].period_ns / 2)) /
gdisp.pwm[channel].period_ns;
if (channel == 0) {
tmp = pwm_read_reg(0x204);
pwm_write_reg(0x204, (tmp & 0xffff0000) | active_cycle);
} else {
tmp = pwm_read_reg(0x208);
pwm_write_reg(0x208, (tmp & 0xffff0000) | active_cycle);
}
gdisp.pwm[channel].duty_ns = duty_ns;
/* DE_INF("%d,%d,%d,%d\n", duty_ns, gdisp.pwm[channel].period_ns, "
"active_cycle, gdisp.pwm[channel].entire_cycle); */
return 0;
}
__s32 pwm_enable(__u32 channel, __bool b_en)
{
__u32 tmp = 0;
__hdle hdl;
if(gdisp.screen[channel].lcd_cfg.lcd_pwm_used)
{
user_gpio_set_t gpio_info[1];
memcpy(gpio_info, &(gdisp.screen[channel].lcd_cfg.lcd_pwm), sizeof(user_gpio_set_t));
if(b_en)
{
gpio_info->mul_sel = 2;
}
else
{
gpio_info->mul_sel = 0;
}
hdl = OSAL_GPIO_Request(gpio_info, 1);
OSAL_GPIO_Release(hdl, 2);
}
if(channel == 0)
{
tmp = pwm_read_reg(0x200);
if(b_en)
{
tmp |= (1<<4);
}
else
{
tmp &= (~(1<<4));
}
pwm_write_reg(0x200,tmp);
}
else
{
tmp = pwm_read_reg(0x200);
if(b_en)
{
tmp |= (1<<19);
}
else
{
tmp &= (~(1<<19));
}
pwm_write_reg(0x200,tmp);
}
gdisp.pwm[channel].enable = b_en;
return 0;
}
void pwm_set_duty(int no,unsigned int duty)
{
unsigned int addr;
addr = PWM_DUTY_REG_ADDR + (0x10 * no);
pwm_write_reg(addr,duty,PWM_DUTY_UPDATE << (8*no));
}
void pwm_set_period(int no,unsigned int period)
{
unsigned int addr;
addr = PWM_PERIOD_REG_ADDR + (0x10 * no);
pwm_write_reg(addr,period,PWM_PERIOD_UPDATE << (8*no));
}
void pwm_set_scalar(int no,unsigned int scalar)
{
unsigned int addr;
addr = PWM_SCALAR_REG_ADDR + (0x10 * no);
pwm_write_reg(addr,scalar,PWM_SCALAR_UPDATE << (8*no));
}
void pwm_set_control(int no,unsigned int ctrl)
{
unsigned int addr;
addr = PWM_CTRL_REG_ADDR + (0x10 * no);
pwm_write_reg(addr,ctrl,PWM_CTRL_UPDATE << (8*no));
} /* End of pwm_proc */
static void __sramfunc rk29_pwm_set_core_voltage(unsigned int uV)
{
u32 gate1;
gate1 = cru_readl(CRU_CLKGATE1_CON);
cru_writel(gate1 & ~((1 << CLK_GATE_PCLK_PEIRPH % 32) | (1 << CLK_GATE_ACLK_PEIRPH % 32) | (1 << CLK_GATE_ACLK_CPU_PERI % 32)), CRU_CLKGATE1_CON);
/* iomux pwm2 */
writel((readl(RK29_GRF_BASE + 0x58) & ~(0x3<<6)) | (0x2<<6), RK29_GRF_BASE + 0x58);
if (uV) {
pwm_lrc = pwm_read_reg(PWM_REG_LRC);
pwm_hrc = pwm_read_reg(PWM_REG_HRC);
}
pwm_write_reg(PWM_REG_CTRL, PWM_DIV|PWM_RESET);
if (uV == 1000000) {
pwm_write_reg(PWM_REG_LRC, 12);
pwm_write_reg(PWM_REG_HRC, 10);
} else {
pwm_write_reg(PWM_REG_LRC, pwm_lrc);
pwm_write_reg(PWM_REG_HRC, pwm_hrc);
}
pwm_write_reg(PWM_REG_CNTR, 0);
pwm_write_reg(PWM_REG_CTRL, PWM_DIV|PWM_ENABLE|PWM_TimeEN);
LOOP(10 * 1000 * LOOPS_PER_USEC); /* delay 10ms */
cru_writel(gate1, CRU_CLKGATE1_CON);
}
static void __sramfunc rk29_pwm_set_core_voltage(unsigned int uV)
{
u32 clk_gate2;
char id = 3;
//sram_printch('y');
#if 1
gate_save_soc_clk(0
| (1 << CLK_GATE_ACLK_PEIRPH % 16)
| (1 << CLK_GATE_HCLK_PEIRPH % 16)
| (1 << CLK_GATE_PCLK_PEIRPH % 16)
, clk_gate2, CRU_CLKGATES_CON(2), 0
| (1 << ((CLK_GATE_ACLK_PEIRPH % 16) + 16))
| (1 << ((CLK_GATE_HCLK_PEIRPH % 16) + 16))
| (1 << ((CLK_GATE_PCLK_PEIRPH % 16) + 16)));
#endif
/* iomux pwm3 */
writel_relaxed((readl_relaxed(RK30_GRF_BASE + 0xB4) & ~(0x1<<14)) | (0x1<<14) |(0x1<<30), RK30_GRF_BASE + 0xB4);//PWM
if (uV) {
pwm_lrc = pwm_read_reg(id,PWM_REG_LRC);
pwm_hrc = pwm_read_reg(id,PWM_REG_HRC);
writel_relaxed((readl_relaxed(RK30_GRF_BASE + 0xB4) & ~(0x1<<14)) | (0x1<<30), RK30_GRF_BASE + 0xB4);//GPIO
grf_writel(GPIO0_PD7_DIR_OUT, GRF_GPIO0H_DIR_ADDR);
grf_writel(GPIO0_PD7_DO_HIGH, GRF_GPIO0H_DO_ADDR);
grf_writel(GPIO0_PD7_EN_MASK, GRF_GPIO0H_EN_ADDR);
}else
{
pwm_write_reg(id,PWM_REG_CTRL, PWM_DIV|PWM_RESET);
pwm_write_reg(id,PWM_REG_LRC, pwm_lrc);
pwm_write_reg(id,PWM_REG_HRC, pwm_hrc);
pwm_write_reg(id,PWM_REG_CNTR, 0);
pwm_write_reg(id,PWM_REG_CTRL, PWM_DIV|PWM_ENABLE|PWM_TimeEN);
}
LOOP(10 * 1000 * LOOPS_PER_USEC); /* delay 10ms */
cru_writel(clk_gate2, CRU_CLKGATES_CON(2));
}
void pwm_set_enable(int no,int enable)
{
unsigned int addr,reg,reg1;
addr = PWM_CTRL_REG_ADDR + (0x10 * no);
reg = REG32_VAL(addr);
if( enable ){
reg |= PWM_ENABLE;
}
else {
reg &= ~PWM_ENABLE;
}
pwm_write_reg(addr,reg,PWM_CTRL_UPDATE << (4*no));
reg1 = REG32_VAL(addr);
pwm_set_gpio(no,enable);
}
/*
* channel: pwm channel,0/1
* pwm_info->freq: pwm freq, in hz
* pwm_info->active_state: 0:low level; 1:high level
*/
__s32 pwm_set_para(__u32 channel, __pwm_info_t *pwm_info)
{
__u32 pre_scal[11][2] = {
{1, 0xf},
{120, 0}, {180, 1}, {240, 2}, {360, 3}, {480, 4},
{12000, 8}, {24000, 9}, {36000, 0xa},
{48000, 0xb}, {72000, 0xc}
};
__u32 pre_scal_id = 0, entire_cycle = 16, active_cycle = 12;
__u32 i = 0, j = 0, tmp = 0;
__u32 freq;
freq = 1000000 / pwm_info->period_ns;
if (freq > 366) {
pre_scal_id = 0;
entire_cycle = 24000000 / freq;
} else {
for (i = 1; i < 11; i++) {
for (j = 16;; j += 16) {
__u32 pwm_freq = 0;
pwm_freq = 24000000 / (pre_scal[i][0] * j);
if (abs(pwm_freq - freq) < abs(tmp - freq)) {
tmp = pwm_freq;
pre_scal_id = i;
entire_cycle = j;
DE_INF("pre_scal:%d, entire_cycle:%d, "
"pwm_freq:%d\n",
pre_scal[i][0], j, pwm_freq);
DE_INF("----%d\n", tmp);
} else if ((tmp < freq) && (pwm_freq < tmp)) {
break;
}
}
}
}
active_cycle = (pwm_info->duty_ns * entire_cycle +
(pwm_info->period_ns / 2)) / pwm_info->period_ns;
gdisp.pwm[channel].enable = pwm_info->enable;
gdisp.pwm[channel].freq = freq;
gdisp.pwm[channel].pre_scal = pre_scal[pre_scal_id][0];
gdisp.pwm[channel].active_state = pwm_info->active_state;
gdisp.pwm[channel].duty_ns = pwm_info->duty_ns;
gdisp.pwm[channel].period_ns = pwm_info->period_ns;
gdisp.pwm[channel].entire_cycle = entire_cycle;
gdisp.pwm[channel].active_cycle = active_cycle;
if (channel == 0) {
pwm_write_reg(0x204, ((entire_cycle - 1) << 16) | active_cycle);
tmp = pwm_read_reg(0x200) & 0xffffff00;
/*
* bit6: gating the special clock for pwm0
* bit5: pwm0: active state is high level
*/
tmp |= ((1 << 6) | (pwm_info->active_state << 5) |
pre_scal[pre_scal_id][1]);
pwm_write_reg(0x200, tmp);
} else {
pwm_write_reg(0x208, ((entire_cycle - 1) << 16) | active_cycle);
tmp = pwm_read_reg(0x200) & 0xff807fff;
/*
* bit21: gating the special clock for pwm1
* bit20: pwm1: active state is high level
*/
tmp |= ((1 << 21) | (pwm_info->active_state << 20) |
(pre_scal[pre_scal_id][1] << 15));
pwm_write_reg(0x200, tmp);
}
pwm_enable(channel, pwm_info->enable);
return 0;
}
/*
* channel: pwm channel,0/1
* pwm_info->freq: pwm freq, in hz
* pwm_info->active_state: 0:low level; 1:high level
*/
__s32 pwm_set_para(__u32 channel, __pwm_info_t *pwm_info)
{
__u32 pre_scal[10] = { 120, 180, 240, 360, 480,
12000, 24000, 36000, 48000, 72000 };
__u32 pre_scal_id = 0, entire_cycle = 256, active_cycle = 192;
__u32 i = 0, tmp = 0;
__u32 freq;
freq = 1000000 / pwm_info->period_ns;
if (freq > 200000) {
DE_WRN("pwm preq is large then 200khz, fix to 200khz\n");
freq = 200000;
}
if (freq > 781) {
pre_scal_id = 0;
entire_cycle =
(24000000 / pre_scal[pre_scal_id] + (freq / 2)) / freq;
DE_INF("pre_scal:%d, entire_cycle:%d, pwm_freq:%d\n",
pre_scal[i], entire_cycle,
24000000 / pre_scal[pre_scal_id] / entire_cycle);
} else {
for (i = 0; i < 10; i++) {
__u32 pwm_freq = 0;
pwm_freq = 24000000 / (pre_scal[i] * 256);
if (abs(pwm_freq - freq) < abs(tmp - freq)) {
tmp = pwm_freq;
pre_scal_id = i;
entire_cycle = 256;
DE_INF("pre_scal:%d, entire_cycle:%d, "
"pwm_freq:%d\n", pre_scal[i], 256,
pwm_freq);
DE_INF("----%d\n", tmp);
}
}
}
active_cycle = (pwm_info->duty_ns * entire_cycle +
(pwm_info->period_ns / 2)) / pwm_info->period_ns;
gdisp.pwm[channel].enable = pwm_info->enable;
gdisp.pwm[channel].freq = freq;
gdisp.pwm[channel].pre_scal = pre_scal[pre_scal_id];
gdisp.pwm[channel].active_state = pwm_info->active_state;
gdisp.pwm[channel].duty_ns = pwm_info->duty_ns;
gdisp.pwm[channel].period_ns = pwm_info->period_ns;
gdisp.pwm[channel].entire_cycle = entire_cycle;
gdisp.pwm[channel].active_cycle = active_cycle;
if (pre_scal_id >= 5)
pre_scal_id += 3;
if (channel == 0) {
pwm_write_reg(0x204, ((entire_cycle - 1) << 16) | active_cycle);
tmp = pwm_read_reg(0x200) & 0xffffff00;
/*
* bit6: gating the special clock for pwm0
* bit5: pwm0: active state is high level
*/
tmp |= (1 << 6) | (pwm_info->active_state << 5) | pre_scal_id;
pwm_write_reg(0x200, tmp);
} else {
pwm_write_reg(0x208, ((entire_cycle - 1) << 16) | active_cycle);
tmp = pwm_read_reg(0x200) & 0xff807fff;
/*
* bit21: gating the special clock for pwm1
* bit20: pwm1: active state is high level
*/
tmp |= (1 << 21) | (pwm_info->active_state << 20) |
(pre_scal_id << 15);
pwm_write_reg(0x200, tmp);
}
pwm_enable(channel, pwm_info->enable);
return 0;
}