static void beagle_common_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
int cpu_model)
{
struct beagle_s *s = (struct beagle_s *) qemu_mallocz(sizeof(*s));
DriveInfo *dmtd = drive_get(IF_MTD, 0, 0);
DriveInfo *dsd = drive_get(IF_SD, 0, 0);
if (!dmtd && !dsd) {
hw_error("%s: SD or NAND image required", __FUNCTION__);
}
#if MAX_SERIAL_PORTS < 1
#error MAX_SERIAL_PORTS must be at least 1!
#endif
s->cpu = omap3_mpu_init(cpu_model, 1, ram_size,
NULL, NULL, serial_hds[0], NULL);
s->nand = nand_init(NAND_MFR_MICRON, 0xba, dmtd ? dmtd->bdrv : NULL);
nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
omap_gpmc_attach(s->cpu->gpmc, BEAGLE_NAND_CS, s->nand, 0, 2);
if (dsd) {
omap3_mmc_attach(s->cpu->omap3_mmc[0], dsd->bdrv, 0, 0);
}
s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c, 0),
s->cpu->irq[0][OMAP_INT_3XXX_SYS_NIRQ],
NULL, NULL);
int i;
for (i = 0; i < nb_nics; i++) {
if (!nd_table[i].model || !strcmp(nd_table[i].model, "smc91c111")) {
break;
}
}
if (cpu_model == omap3430) {
qemu_set_irq(qdev_get_gpio_in(s->cpu->gpio, BEAGLE_GPIO_ID1),1);
qemu_set_irq(qdev_get_gpio_in(s->cpu->gpio, BEAGLE_GPIO_ID3),1);
}
if (i < nb_nics) {
s->smc = qdev_create(NULL, "smc91c111");
qdev_set_nic_properties(s->smc, &nd_table[i]);
qdev_init_nofail(s->smc);
sysbus_connect_irq(sysbus_from_qdev(s->smc), 0,
qdev_get_gpio_in(s->cpu->gpio, 54));
} else {
hw_error("%s: no NIC for smc91c111\n", __FUNCTION__);
}
omap_gpmc_attach(s->cpu->gpmc, BEAGLE_SMC_CS, s->smc, 0, 0);
/* Wire up an I2C slave which returns EDID monitor information;
* newer Linux kernels won't turn on the display unless they
* detect a monitor over DDC.
*/
s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c, 2), "i2c-ddc", 0x50);
omap_lcd_panel_attach(s->cpu->dss);
}
static void lx60_net_init(MemoryRegion *address_space,
target_phys_addr_t base,
target_phys_addr_t descriptors,
target_phys_addr_t buffers,
qemu_irq irq, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
MemoryRegion *ram;
dev = qdev_create(NULL, "open_eth");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = sysbus_from_qdev(dev);
sysbus_connect_irq(s, 0, irq);
memory_region_add_subregion(address_space, base,
sysbus_mmio_get_region(s, 0));
memory_region_add_subregion(address_space, descriptors,
sysbus_mmio_get_region(s, 1));
ram = g_malloc(sizeof(*ram));
memory_region_init_ram(ram, "open_eth.ram", 16384);
vmstate_register_ram_global(ram);
memory_region_add_subregion(address_space, buffers, ram);
}
static void lx60_net_init(MemoryRegion *address_space,
hwaddr base,
hwaddr descriptors,
hwaddr buffers,
qemu_irq irq, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
MemoryRegion *ram;
dev = qdev_create(NULL, "open_eth");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, irq);
memory_region_add_subregion(address_space, base,
sysbus_mmio_get_region(s, 0));
memory_region_add_subregion(address_space, descriptors,
sysbus_mmio_get_region(s, 1));
ram = g_malloc(sizeof(*ram));
memory_region_init_ram(ram, OBJECT(s), "open_eth.ram", 16384,
&error_fatal);
vmstate_register_ram_global(ram);
memory_region_add_subregion(address_space, buffers, ram);
}
static void overo_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
struct overo_s *s = (struct overo_s *) g_malloc0(sizeof(*s));
DriveInfo *dmtd = drive_get(IF_MTD, 0, 0);
DriveInfo *dsd = drive_get(IF_SD, 0, 0);
if (ram_size > 1024 * 1024 * 1024) {
fprintf(stderr, "overo: maximum permitted RAM size 1024MB\n");
exit(1);
}
if (!dmtd && !dsd) {
hw_error("%s: SD or NAND image required", __FUNCTION__);
}
s->cpu = omap3_mpu_init(omap3430, ram_size,
NULL, NULL, serial_hds[0], NULL);
s->nand = nand_init(dmtd ? dmtd->bdrv : NULL, NAND_MFR_MICRON, 0xba);
nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
omap_gpmc_attach_nand(s->cpu->gpmc, OVERO_NAND_CS, s->nand);
if (dsd) {
omap3_mmc_attach(s->cpu->omap3_mmc[0], dsd->bdrv, 0, 0);
}
/* FAB revs >= 2516: 4030 interrupt is GPIO 0 (earlier ones were 112) */
s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c, 0),
qdev_get_gpio_in(s->cpu->gpio, 0),
NULL, NULL);
/* Wire up an I2C slave which returns EDID monitor information;
* newer Linux kernels won't turn on the display unless they
* detect a monitor over DDC.
*/
s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c, 2), "i2c-ddc", 0x50);
omap_lcd_panel_attach(s->cpu->dss);
/* Strictly this should be a LAN9221 */
if (nd_table[0].vlan) {
/* The ethernet chip hangs off the GPMC */
NICInfo *nd = &nd_table[0];
qemu_check_nic_model(nd, "lan9118");
s->eth = qdev_create(NULL, "lan9118");
qdev_set_nic_properties(s->eth, nd);
qdev_init_nofail(s->eth);
omap_gpmc_attach(s->cpu->gpmc, OVERO_NET_CS,
sysbus_mmio_get_region(sysbus_from_qdev(s->eth), 0));
sysbus_connect_irq(sysbus_from_qdev(s->eth), 0,
qdev_get_gpio_in(s->cpu->gpio, 176));
}
}
void spapr_vlan_create(VIOsPAPRBus *bus, NICInfo *nd)
{
DeviceState *dev;
dev = qdev_create(&bus->bus, "spapr-vlan");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
qemu_check_nic_model(nd, "cadence_gem");
dev = qdev_create(NULL, "cadence_gem");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = sysbus_from_qdev(dev);
sysbus_mmio_map(s, 0, base);
sysbus_connect_irq(s, 0, irq);
}
/* Legacy helper function. Should go away when machine config files are
implemented. */
void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
qemu_check_nic_model(nd, "smc91c111");
dev = qdev_create(NULL, "smc91c111");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, base);
sysbus_connect_irq(s, 0, irq);
}
static void mipsnet_init(int base, qemu_irq irq, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "mipsnet");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(s, 0, irq);
memory_region_add_subregion(get_system_io(),
base,
sysbus_mmio_get_region(s, 0));
}
static void lan9215_init(uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
/* This should be a 9215 but the 9118 is close enough */
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], "lan9118");
dev = qdev_create(NULL, "lan9118");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_prop_set_uint32(dev, "mode_16bit", 1);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, base);
sysbus_connect_irq(s, 0, irq);
}
}
static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque,
const char *name, hwaddr size)
{
SysBusDevice *s;
NICInfo *nd = &nd_table[0];
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
qemu_check_nic_model(nd, "lan9118");
mms->lan9118 = qdev_create(NULL, "lan9118");
qdev_set_nic_properties(mms->lan9118, nd);
qdev_init_nofail(mms->lan9118);
s = SYS_BUS_DEVICE(mms->lan9118);
sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 16));
return sysbus_mmio_get_region(s, 0);
}
static void openrisc_sim_net_init(MemoryRegion *address_space,
hwaddr base,
hwaddr descriptors,
qemu_irq irq, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_create(NULL, "open_eth");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = sysbus_from_qdev(dev);
sysbus_connect_irq(s, 0, irq);
memory_region_add_subregion(address_space, base,
sysbus_mmio_get_region(s, 0));
memory_region_add_subregion(address_space, descriptors,
sysbus_mmio_get_region(s, 1));
}
static void openrisc_sim_net_init(hwaddr base, hwaddr descriptors,
int num_cpus, qemu_irq **cpu_irqs,
int irq_pin, NICInfo *nd)
{
DeviceState *dev;
SysBusDevice *s;
int i;
dev = qdev_create(NULL, "open_eth");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
for (i = 0; i < num_cpus; i++) {
sysbus_connect_irq(s, 0, cpu_irqs[i][irq_pin]);
}
sysbus_mmio_map(s, 0, base);
sysbus_mmio_map(s, 1, descriptors);
}
static void lance_init(NICInfo *nd, hwaddr leaddr,
void *dma_opaque, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
qemu_irq reset;
qemu_check_nic_model(&nd_table[0], "lance");
dev = qdev_create(NULL, "lance");
qdev_set_nic_properties(dev, nd);
qdev_prop_set_ptr(dev, "dma", dma_opaque);
qdev_init_nofail(dev);
s = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(s, 0, leaddr);
sysbus_connect_irq(s, 0, irq);
reset = qdev_get_gpio_in(dev, 0);
qdev_connect_gpio_out(dma_opaque, 0, reset);
}
DeviceState *etsec_create(hwaddr base,
MemoryRegion * mr,
NICInfo * nd,
qemu_irq tx_irq,
qemu_irq rx_irq,
qemu_irq err_irq)
{
DeviceState *dev;
dev = qdev_create(NULL, "eTSEC");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, tx_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, rx_irq);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, err_irq);
memory_region_add_subregion(mr, base,
SYS_BUS_DEVICE(dev)->mmio[0].memory);
return dev;
}
void s390_create_virtio_net(BusState *bus, const char *name)
{
int i;
for (i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
DeviceState *dev;
if (!nd->model) {
nd->model = g_strdup("virtio");
}
if (strcmp(nd->model, "virtio")) {
fprintf(stderr, "S390 only supports VirtIO nics\n");
exit(1);
}
dev = qdev_create(bus, name);
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
}
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
DeviceState *dev = NULL;
SysBusDevice *busdev;
qemu_irq pic[128];
int n;
qemu_irq cpu_irq[4];
qemu_irq cpu_fiq[4];
MemoryRegion *sysram;
MemoryRegion *dram;
MemoryRegion *sysmem;
char *sysboot_filename;
switch (machine_id) {
case CALXEDA_HIGHBANK:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
break;
case CALXEDA_MIDWAY:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
break;
default:
assert(0);
}
for (n = 0; n < smp_cpus; n++) {
Object *cpuobj;
ARMCPU *cpu;
cpuobj = object_new(machine->cpu_type);
cpu = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
if (n) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(cpuobj, true,
"start-powered-off", &error_abort);
}
if (object_property_find(cpuobj, "reset-cbar", NULL)) {
object_property_set_int(cpuobj, MPCORE_PERIPHBASE,
"reset-cbar", &error_abort);
}
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ);
}
sysmem = get_system_memory();
dram = g_new(MemoryRegion, 1);
memory_region_allocate_system_memory(dram, NULL, "highbank.dram", ram_size);
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, dram);
sysram = g_new(MemoryRegion, 1);
memory_region_init_ram_nomigrate(sysram, NULL, "highbank.sysram", 0x8000,
&error_fatal);
memory_region_add_subregion(sysmem, 0xfff88000, sysram);
if (bios_name != NULL) {
sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (sysboot_filename != NULL) {
if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
error_report("Unable to load %s", bios_name);
exit(1);
}
g_free(sysboot_filename);
} else {
error_report("Unable to find %s", bios_name);
exit(1);
}
}
switch (machine_id) {
case CALXEDA_HIGHBANK:
dev = qdev_create(NULL, "l2x0");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff12000);
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
break;
case CALXEDA_MIDWAY:
dev = qdev_create(NULL, TYPE_A15MPCORE_PRIV);
break;
}
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]);
}
for (n = 0; n < 128; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
pl011_create(0xfff36000, pic[20], serial_hds[0]);
dev = qdev_create(NULL, TYPE_HIGHBANK_REGISTERS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff3c000);
sysbus_create_simple("pl061", 0xfff30000, pic[14]);
sysbus_create_simple("pl061", 0xfff31000, pic[15]);
sysbus_create_simple("pl061", 0xfff32000, pic[16]);
sysbus_create_simple("pl061", 0xfff33000, pic[17]);
sysbus_create_simple("pl031", 0xfff35000, pic[19]);
sysbus_create_simple("pl022", 0xfff39000, pic[23]);
sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]);
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);
qemu_check_nic_model(&nd_table[1], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[1]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
}
/* TODO create and connect IDE devices for ide_drive_get() */
highbank_binfo.ram_size = ram_size;
highbank_binfo.kernel_filename = kernel_filename;
highbank_binfo.kernel_cmdline = kernel_cmdline;
highbank_binfo.initrd_filename = initrd_filename;
/* highbank requires a dtb in order to boot, and the dtb will override
* the board ID. The following value is ignored, so set it to -1 to be
* clear that the value is meaningless.
*/
highbank_binfo.board_id = -1;
highbank_binfo.nb_cpus = smp_cpus;
highbank_binfo.loader_start = 0;
highbank_binfo.write_secondary_boot = hb_write_secondary;
highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
if (!kvm_enabled()) {
highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
highbank_binfo.write_board_setup = hb_write_board_setup;
highbank_binfo.secure_board_setup = true;
} else {
warn_report("cannot load built-in Monitor support "
"if KVM is enabled. Some guests (such as Linux) "
"may not boot.");
}
arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}
static void
petalogix_ml605_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
Object *ds, *cs;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
DriveInfo *dinfo;
int i;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
/* init CPUs */
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
/* Use FPU but don't use floating point conversion and square
* root instructions
*/
object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
&error_abort);
object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
LMB_BRAM_SIZE, &error_fatal);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
&error_fatal);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
(64 * 1024), FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
dev = qdev_create(NULL, "xlnx.xps-intc");
qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
irq[UART16550_IRQ], 115200, serial_hds[0],
DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
dev = qdev_create(NULL, "xlnx.xps-timer");
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
/* axi ethernet and dma initialization. */
qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
dma = qdev_create(NULL, "xlnx.axi-dma");
/* FIXME: attach to the sysbus instead */
object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
NULL);
object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
NULL);
ds = object_property_get_link(OBJECT(dma),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(dma),
"axistream-control-connected-target", NULL);
qdev_set_nic_properties(eth0, &nd_table[0]);
qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
qdev_prop_set_uint32(eth0, "txmem", 0x1000);
object_property_set_link(OBJECT(eth0), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(eth0), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(eth0);
sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
ds = object_property_get_link(OBJECT(eth0),
"axistream-connected-target", NULL);
cs = object_property_get_link(OBJECT(eth0),
"axistream-control-connected-target", NULL);
qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
object_property_set_link(OBJECT(dma), OBJECT(ds),
"axistream-connected", &error_abort);
object_property_set_link(OBJECT(dma), OBJECT(cs),
"axistream-control-connected", &error_abort);
qdev_init_nofail(dma);
sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
{
SSIBus *spi;
dev = qdev_create(NULL, "xlnx.xps-spi");
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; i++) {
qemu_irq cs_line;
dev = ssi_create_slave(spi, "n25q128");
cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
/* setup PVR to match kernel settings */
cpu->env.pvr.regs[4] = 0xc56b8000;
cpu->env.pvr.regs[5] = 0xc56be000;
cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
machine->initrd_filename,
BINARY_DEVICE_TREE_FILE,
NULL);
}
static void reptar_init(MachineState *machine)
{
MemoryRegion *sysmem = get_system_memory();
struct reptar_s *s = (struct reptar_s *)g_malloc0(sizeof(*s));
DriveInfo *dmtd = NULL, *dsd = NULL, *pflash = NULL;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
/* (DRE) */
uint32_t pflash_size = 16 << 10; /* 16 KB */
if (ram_size > 1024 * 1024 * 1024) {
fprintf(stderr, "reptar: maximum permitted RAM size 1024MB\n");
exit(1);
}
/* Check if we are in -kernel u-boot.bin mode */
if (kernel_filename) {
/* (DRE) We do the following in order to retrieve the kernel filename during the boot process.
* For example, if qemu was launched with -kernel u-boot.bin */
reptar_binfo.ram_size = ram_size;
reptar_binfo.kernel_filename = kernel_filename;
reptar_binfo.kernel_cmdline = kernel_cmdline;
reptar_binfo.initrd_filename = initrd_filename;
reptar_binfo.loader_start = 0x40014100; /* Start of small bootloader*/
reptar_binfo.board_id = 0;
} else
reptar_binfo.kernel_filename = NULL;
s->cpu = omap3_mpu_init(sysmem, omap3430, ram_size, NULL, NULL, serial_hds[0], NULL);
pflash = drive_get(IF_PFLASH, 0, 0);
if (pflash) {
if (!pflash_cfi02_register(0x30000000,
NULL,
"reptar.nand_flash",
pflash_size,
blk_by_legacy_dinfo(pflash),
sector_len,
pflash_size / sector_len,
1, 2, 0, 0, 0, 0, 0x555, 0x2AA, 0)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
}
else {
dmtd = drive_get(IF_MTD, 0, 0);
s->nand = nand_init(dmtd ? blk_by_legacy_dinfo(dmtd) : NULL, NAND_MFR_MICRON, 0xba);
nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
omap_gpmc_attach_nand(s->cpu->gpmc, REPTAR_NAND_CS, s->nand);
}
/*
* (DRE) Define MMC if any
*/
dsd = drive_get(IF_SD, 0, 0);
if (dsd)
omap3_mmc_attach(s->cpu->omap3_mmc[0], blk_by_legacy_dinfo(dsd), 0, 0);
if (!pflash && !dmtd && !dsd)
hw_error("%s: SD or NAND image required", __FUNCTION__);
/* FAB revs >= 2516: 4030 interrupt is GPIO 0 (earlier ones were 112) */
s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c[0]),
qdev_get_gpio_in(s->cpu->gpio, 0),
NULL,
NULL);
/* Wire up an I2C slave which returns EDID monitor information;
* newer Linux kernels won't turn on the display unless they
* detect a monitor over DDC.
*/
s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c[2]), "i2c-ddc", 0x50);
omap_lcd_panel_attach(s->cpu->dss);
/* Strictly this should be a LAN9221 */
#if 0
if (nd_table[0].vlan) {
#endif /* 0 */
/* The ethernet chip hangs off the GPMC */
NICInfo *nd = &nd_table[0];
qemu_check_nic_model(nd, "lan9118");
s->eth = qdev_create(NULL, "lan9118");
qdev_set_nic_properties(s->eth, nd);
qdev_init_nofail(s->eth);
omap_gpmc_attach(s->cpu->gpmc, REPTAR_NET_CS,
sysbus_mmio_get_region(SYS_BUS_DEVICE(s->eth), 0));
sysbus_connect_irq(SYS_BUS_DEVICE(s->eth), 0, qdev_get_gpio_in(s->cpu->gpio, 29));
#if 0
}
#endif /* 0 */
// Create reptar_sp6 with it's base address
s->sp6 = sysbus_create_simple("reptar_sp6",0x18000000,NULL);
// Connect reptar_sp6 to GPIO10 for the IRQ
sysbus_connect_irq(SYS_BUS_DEVICE(s->sp6), 0, qdev_get_gpio_in(s->cpu->gpio, 10));
}
static void mips_jazz_init(MachineState *machine,
enum jazz_model_e jazz_model)
{
MemoryRegion *address_space = get_system_memory();
char *filename;
int bios_size, n;
MIPSCPU *cpu;
CPUClass *cc;
CPUMIPSState *env;
qemu_irq *i8259;
rc4030_dma *dmas;
IOMMUMemoryRegion *rc4030_dma_mr;
MemoryRegion *isa_mem = g_new(MemoryRegion, 1);
MemoryRegion *isa_io = g_new(MemoryRegion, 1);
MemoryRegion *rtc = g_new(MemoryRegion, 1);
MemoryRegion *i8042 = g_new(MemoryRegion, 1);
MemoryRegion *dma_dummy = g_new(MemoryRegion, 1);
NICInfo *nd;
DeviceState *dev, *rc4030;
SysBusDevice *sysbus;
ISABus *isa_bus;
ISADevice *pit;
DriveInfo *fds[MAX_FD];
qemu_irq esp_reset, dma_enable;
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *bios = g_new(MemoryRegion, 1);
MemoryRegion *bios2 = g_new(MemoryRegion, 1);
/* init CPUs */
cpu = MIPS_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
qemu_register_reset(main_cpu_reset, cpu);
/* Chipset returns 0 in invalid reads and do not raise data exceptions.
* However, we can't simply add a global memory region to catch
* everything, as memory core directly call unassigned_mem_read/write
* on some invalid accesses, which call do_unassigned_access on the
* CPU, which raise an exception.
* Handle that case by hijacking the do_unassigned_access method on
* the CPU, and do not raise exceptions for data access. */
cc = CPU_GET_CLASS(cpu);
real_do_unassigned_access = cc->do_unassigned_access;
cc->do_unassigned_access = mips_jazz_do_unassigned_access;
/* allocate RAM */
memory_region_allocate_system_memory(ram, NULL, "mips_jazz.ram",
machine->ram_size);
memory_region_add_subregion(address_space, 0, ram);
memory_region_init_ram(bios, NULL, "mips_jazz.bios", MAGNUM_BIOS_SIZE,
&error_fatal);
memory_region_set_readonly(bios, true);
memory_region_init_alias(bios2, NULL, "mips_jazz.bios", bios,
0, MAGNUM_BIOS_SIZE);
memory_region_add_subregion(address_space, 0x1fc00000LL, bios);
memory_region_add_subregion(address_space, 0xfff00000LL, bios2);
/* load the BIOS image. */
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
bios_size = load_image_targphys(filename, 0xfff00000LL,
MAGNUM_BIOS_SIZE);
g_free(filename);
} else {
bios_size = -1;
}
if ((bios_size < 0 || bios_size > MAGNUM_BIOS_SIZE) && !qtest_enabled()) {
error_report("Could not load MIPS bios '%s'", bios_name);
exit(1);
}
/* Init CPU internal devices */
cpu_mips_irq_init_cpu(cpu);
cpu_mips_clock_init(cpu);
/* Chipset */
rc4030 = rc4030_init(&dmas, &rc4030_dma_mr);
sysbus = SYS_BUS_DEVICE(rc4030);
sysbus_connect_irq(sysbus, 0, env->irq[6]);
sysbus_connect_irq(sysbus, 1, env->irq[3]);
memory_region_add_subregion(address_space, 0x80000000,
sysbus_mmio_get_region(sysbus, 0));
memory_region_add_subregion(address_space, 0xf0000000,
sysbus_mmio_get_region(sysbus, 1));
memory_region_init_io(dma_dummy, NULL, &dma_dummy_ops, NULL, "dummy_dma", 0x1000);
memory_region_add_subregion(address_space, 0x8000d000, dma_dummy);
/* ISA bus: IO space at 0x90000000, mem space at 0x91000000 */
memory_region_init(isa_io, NULL, "isa-io", 0x00010000);
memory_region_init(isa_mem, NULL, "isa-mem", 0x01000000);
memory_region_add_subregion(address_space, 0x90000000, isa_io);
memory_region_add_subregion(address_space, 0x91000000, isa_mem);
isa_bus = isa_bus_new(NULL, isa_mem, isa_io, &error_abort);
/* ISA devices */
i8259 = i8259_init(isa_bus, env->irq[4]);
isa_bus_irqs(isa_bus, i8259);
DMA_init(isa_bus, 0);
pit = pit_init(isa_bus, 0x40, 0, NULL);
pcspk_init(isa_bus, pit);
/* Video card */
switch (jazz_model) {
case JAZZ_MAGNUM:
dev = qdev_create(NULL, "sysbus-g364");
qdev_init_nofail(dev);
sysbus = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(sysbus, 0, 0x60080000);
sysbus_mmio_map(sysbus, 1, 0x40000000);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 3));
{
/* Simple ROM, so user doesn't have to provide one */
MemoryRegion *rom_mr = g_new(MemoryRegion, 1);
memory_region_init_ram(rom_mr, NULL, "g364fb.rom", 0x80000,
&error_fatal);
memory_region_set_readonly(rom_mr, true);
uint8_t *rom = memory_region_get_ram_ptr(rom_mr);
memory_region_add_subregion(address_space, 0x60000000, rom_mr);
rom[0] = 0x10; /* Mips G364 */
}
break;
case JAZZ_PICA61:
isa_vga_mm_init(0x40000000, 0x60000000, 0, get_system_memory());
break;
default:
break;
}
/* Network controller */
for (n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!nd->model)
nd->model = g_strdup("dp83932");
if (strcmp(nd->model, "dp83932") == 0) {
qemu_check_nic_model(nd, "dp83932");
dev = qdev_create(NULL, "dp8393x");
qdev_set_nic_properties(dev, nd);
qdev_prop_set_uint8(dev, "it_shift", 2);
qdev_prop_set_ptr(dev, "dma_mr", rc4030_dma_mr);
qdev_init_nofail(dev);
sysbus = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(sysbus, 0, 0x80001000);
sysbus_mmio_map(sysbus, 1, 0x8000b000);
sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
break;
} else if (is_help_option(nd->model)) {
fprintf(stderr, "qemu: Supported NICs: dp83932\n");
exit(1);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
exit(1);
}
}
/* SCSI adapter */
esp_init(0x80002000, 0,
rc4030_dma_read, rc4030_dma_write, dmas[0],
qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);
/* Floppy */
for (n = 0; n < MAX_FD; n++) {
fds[n] = drive_get(IF_FLOPPY, 0, n);
}
/* FIXME: we should enable DMA with a custom IsaDma device */
fdctrl_init_sysbus(qdev_get_gpio_in(rc4030, 1), -1, 0x80003000, fds);
/* Real time clock */
rtc_init(isa_bus, 1980, NULL);
memory_region_init_io(rtc, NULL, &rtc_ops, NULL, "rtc", 0x1000);
memory_region_add_subregion(address_space, 0x80004000, rtc);
/* Keyboard (i8042) */
i8042_mm_init(qdev_get_gpio_in(rc4030, 6), qdev_get_gpio_in(rc4030, 7),
i8042, 0x1000, 0x1);
memory_region_add_subregion(address_space, 0x80005000, i8042);
/* Serial ports */
if (serial_hds[0]) {
serial_mm_init(address_space, 0x80006000, 0,
qdev_get_gpio_in(rc4030, 8), 8000000/16,
serial_hds[0], DEVICE_NATIVE_ENDIAN);
}
if (serial_hds[1]) {
serial_mm_init(address_space, 0x80007000, 0,
qdev_get_gpio_in(rc4030, 9), 8000000/16,
serial_hds[1], DEVICE_NATIVE_ENDIAN);
}
/* Parallel port */
if (parallel_hds[0])
parallel_mm_init(address_space, 0x80008000, 0,
qdev_get_gpio_in(rc4030, 0), parallel_hds[0]);
/* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */
/* NVRAM */
dev = qdev_create(NULL, "ds1225y");
qdev_init_nofail(dev);
sysbus = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(sysbus, 0, 0x80009000);
/* LED indicator */
sysbus_create_simple("jazz-led", 0x8000f000, NULL);
}
static void
petalogix_s3adsp1800_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
DeviceState *dev;
MicroBlazeCPU *cpu;
DriveInfo *dinfo;
int i;
hwaddr ddr_base = MEMORY_BASEADDR;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
MemoryRegion *sysmem = get_system_memory();
cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
object_property_set_str(OBJECT(cpu), "7.10.d", "version", &error_abort);
object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, NULL,
"petalogix_s3adsp1800.lmb_bram", LMB_BRAM_SIZE,
&error_fatal);
memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, NULL, "petalogix_s3adsp1800.ram",
ram_size, &error_fatal);
memory_region_add_subregion(sysmem, ddr_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_s3adsp1800.flash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
64 * KiB, FLASH_SIZE >> 16,
1, 0x89, 0x18, 0x0000, 0x0, 1);
dev = qdev_create(NULL, "xlnx.xps-intc");
qdev_prop_set_uint32(dev, "kind-of-intr",
1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
xilinx_uartlite_create(UARTLITE_BASEADDR, irq[UARTLITE_IRQ],
serial_hd(0));
/* 2 timers at irq 2 @ 62 Mhz. */
dev = qdev_create(NULL, "xlnx.xps-timer");
qdev_prop_set_uint32(dev, "one-timer-only", 0);
qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
qemu_check_nic_model(&nd_table[0], "xlnx.xps-ethernetlite");
dev = qdev_create(NULL, "xlnx.xps-ethernetlite");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]);
create_unimplemented_device("gpio", GPIO_BASEADDR, 0x10000);
microblaze_load_kernel(cpu, ddr_base, ram_size,
machine->initrd_filename,
BINARY_DEVICE_TREE_FILE,
NULL);
}
static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
{
FslIMX6ULState *s = FSL_IMX6UL(dev);
int i;
qemu_irq irq;
char name[NAME_SIZE];
if (smp_cpus > FSL_IMX6UL_NUM_CPUS) {
error_setg(errp, "%s: Only %d CPUs are supported (%d requested)",
TYPE_FSL_IMX6UL, FSL_IMX6UL_NUM_CPUS, smp_cpus);
return;
}
for (i = 0; i < smp_cpus; i++) {
Object *o = OBJECT(&s->cpu[i]);
object_property_set_int(o, QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
/* On uniprocessor, the CBAR is set to 0 */
if (smp_cpus > 1) {
object_property_set_int(o, FSL_IMX6UL_A7MPCORE_ADDR,
"reset-cbar", &error_abort);
}
if (i) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(o, true,
"start-powered-off", &error_abort);
}
object_property_set_bool(o, true, "realized", &error_abort);
}
/*
* A7MPCORE
*/
object_property_set_int(OBJECT(&s->a7mpcore), smp_cpus, "num-cpu",
&error_abort);
object_property_set_int(OBJECT(&s->a7mpcore),
FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL,
"num-irq", &error_abort);
object_property_set_bool(OBJECT(&s->a7mpcore), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR);
for (i = 0; i < smp_cpus; i++) {
SysBusDevice *sbd = SYS_BUS_DEVICE(&s->a7mpcore);
DeviceState *d = DEVICE(qemu_get_cpu(i));
irq = qdev_get_gpio_in(d, ARM_CPU_IRQ);
sysbus_connect_irq(sbd, i, irq);
sysbus_connect_irq(sbd, i + smp_cpus, qdev_get_gpio_in(d, ARM_CPU_FIQ));
sysbus_connect_irq(sbd, i + 2 * smp_cpus,
qdev_get_gpio_in(d, ARM_CPU_VIRQ));
sysbus_connect_irq(sbd, i + 3 * smp_cpus,
qdev_get_gpio_in(d, ARM_CPU_VFIQ));
}
/*
* A7MPCORE DAP
*/
create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR,
0x100000);
/*
* GPT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) {
static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = {
FSL_IMX6UL_GPT1_ADDR,
FSL_IMX6UL_GPT2_ADDR,
};
static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = {
FSL_IMX6UL_GPT1_IRQ,
FSL_IMX6UL_GPT2_IRQ,
};
s->gpt[i].ccm = IMX_CCM(&s->ccm);
object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0,
FSL_IMX6UL_GPTn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPTn_IRQ[i]));
}
/*
* EPIT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) {
static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = {
FSL_IMX6UL_EPIT1_ADDR,
FSL_IMX6UL_EPIT2_ADDR,
};
static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = {
FSL_IMX6UL_EPIT1_IRQ,
FSL_IMX6UL_EPIT2_IRQ,
};
s->epit[i].ccm = IMX_CCM(&s->ccm);
object_property_set_bool(OBJECT(&s->epit[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0,
FSL_IMX6UL_EPITn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_EPITn_IRQ[i]));
}
/*
* GPIO
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) {
static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_ADDR,
FSL_IMX6UL_GPIO2_ADDR,
FSL_IMX6UL_GPIO3_ADDR,
FSL_IMX6UL_GPIO4_ADDR,
FSL_IMX6UL_GPIO5_ADDR,
};
static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_LOW_IRQ,
FSL_IMX6UL_GPIO2_LOW_IRQ,
FSL_IMX6UL_GPIO3_LOW_IRQ,
FSL_IMX6UL_GPIO4_LOW_IRQ,
FSL_IMX6UL_GPIO5_LOW_IRQ,
};
static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_HIGH_IRQ,
FSL_IMX6UL_GPIO2_HIGH_IRQ,
FSL_IMX6UL_GPIO3_HIGH_IRQ,
FSL_IMX6UL_GPIO4_HIGH_IRQ,
FSL_IMX6UL_GPIO5_HIGH_IRQ,
};
object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
FSL_IMX6UL_GPIOn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPIOn_LOW_IRQ[i]));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPIOn_HIGH_IRQ[i]));
}
/*
* IOMUXC and IOMUXC_GPR
*/
for (i = 0; i < 1; i++) {
static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = {
FSL_IMX6UL_IOMUXC_ADDR,
FSL_IMX6UL_IOMUXC_GPR_ADDR,
};
snprintf(name, NAME_SIZE, "iomuxc%d", i);
create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000);
}
/*
* CCM
*/
object_property_set_bool(OBJECT(&s->ccm), true, "realized", &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR);
/*
* SRC
*/
object_property_set_bool(OBJECT(&s->src), true, "realized", &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR);
/*
* GPCv2
*/
object_property_set_bool(OBJECT(&s->gpcv2), true,
"realized", &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR);
/* Initialize all ECSPI */
for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) {
static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = {
FSL_IMX6UL_ECSPI1_ADDR,
FSL_IMX6UL_ECSPI2_ADDR,
FSL_IMX6UL_ECSPI3_ADDR,
FSL_IMX6UL_ECSPI4_ADDR,
};
static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = {
FSL_IMX6UL_ECSPI1_IRQ,
FSL_IMX6UL_ECSPI2_IRQ,
FSL_IMX6UL_ECSPI3_IRQ,
FSL_IMX6UL_ECSPI4_IRQ,
};
/* Initialize the SPI */
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
FSL_IMX6UL_SPIn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_SPIn_IRQ[i]));
}
/*
* I2C
*/
for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) {
static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = {
FSL_IMX6UL_I2C1_ADDR,
FSL_IMX6UL_I2C2_ADDR,
FSL_IMX6UL_I2C3_ADDR,
FSL_IMX6UL_I2C4_ADDR,
};
static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = {
FSL_IMX6UL_I2C1_IRQ,
FSL_IMX6UL_I2C2_IRQ,
FSL_IMX6UL_I2C3_IRQ,
FSL_IMX6UL_I2C4_IRQ,
};
object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_I2Cn_IRQ[i]));
}
/*
* UART
*/
for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) {
static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = {
FSL_IMX6UL_UART1_ADDR,
FSL_IMX6UL_UART2_ADDR,
FSL_IMX6UL_UART3_ADDR,
FSL_IMX6UL_UART4_ADDR,
FSL_IMX6UL_UART5_ADDR,
FSL_IMX6UL_UART6_ADDR,
FSL_IMX6UL_UART7_ADDR,
FSL_IMX6UL_UART8_ADDR,
};
static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = {
FSL_IMX6UL_UART1_IRQ,
FSL_IMX6UL_UART2_IRQ,
FSL_IMX6UL_UART3_IRQ,
FSL_IMX6UL_UART4_IRQ,
FSL_IMX6UL_UART5_IRQ,
FSL_IMX6UL_UART6_IRQ,
FSL_IMX6UL_UART7_IRQ,
FSL_IMX6UL_UART8_IRQ,
};
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
object_property_set_bool(OBJECT(&s->uart[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0,
FSL_IMX6UL_UARTn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_UARTn_IRQ[i]));
}
/*
* Ethernet
*/
for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) {
static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_ADDR,
FSL_IMX6UL_ENET2_ADDR,
};
static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_IRQ,
FSL_IMX6UL_ENET2_IRQ,
};
static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_TIMER_IRQ,
FSL_IMX6UL_ENET2_TIMER_IRQ,
};
object_property_set_uint(OBJECT(&s->eth[i]),
FSL_IMX6UL_ETH_NUM_TX_RINGS,
"tx-ring-num", &error_abort);
qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]);
object_property_set_bool(OBJECT(&s->eth[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0,
FSL_IMX6UL_ENETn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_ENETn_IRQ[i]));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_ENETn_TIMER_IRQ[i]));
}
/*
* USDHC
*/
for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) {
static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = {
FSL_IMX6UL_USDHC1_ADDR,
FSL_IMX6UL_USDHC2_ADDR,
};
static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = {
FSL_IMX6UL_USDHC1_IRQ,
FSL_IMX6UL_USDHC2_IRQ,
};
object_property_set_bool(OBJECT(&s->usdhc[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
FSL_IMX6UL_USDHCn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_USDHCn_IRQ[i]));
}
/*
* SNVS
*/
object_property_set_bool(OBJECT(&s->snvs), true, "realized", &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR);
/*
* Watchdog
*/
for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) {
static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = {
FSL_IMX6UL_WDOG1_ADDR,
FSL_IMX6UL_WDOG2_ADDR,
FSL_IMX6UL_WDOG3_ADDR,
};
object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
FSL_IMX6UL_WDOGn_ADDR[i]);
}
/*
* GPR
*/
object_property_set_bool(OBJECT(&s->gpr), true, "realized",
&error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR);
/*
* SDMA
*/
create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000);
/*
* APHB_DMA
*/
create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR,
FSL_IMX6UL_APBH_DMA_SIZE);
/*
* ADCs
*/
for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) {
static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = {
FSL_IMX6UL_ADC1_ADDR,
FSL_IMX6UL_ADC2_ADDR,
};
snprintf(name, NAME_SIZE, "adc%d", i);
create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000);
}
/*
* LCD
*/
create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000);
/*
* ROM memory
*/
memory_region_init_rom(&s->rom, NULL, "imx6ul.rom",
FSL_IMX6UL_ROM_SIZE, &error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR,
&s->rom);
/*
* CAAM memory
*/
memory_region_init_rom(&s->caam, NULL, "imx6ul.caam",
FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR,
&s->caam);
/*
* OCRAM memory
*/
memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram",
FSL_IMX6UL_OCRAM_MEM_SIZE,
&error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR,
&s->ocram);
/*
* internal OCRAM (128 KB) is aliased over 512 KB
*/
memory_region_init_alias(&s->ocram_alias, NULL, "imx6ul.ocram_alias",
&s->ocram, 0, FSL_IMX6UL_OCRAM_ALIAS_SIZE);
memory_region_add_subregion(get_system_memory(),
FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias);
}
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
static void highbank_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUARMState *env = NULL;
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[128];
int n;
qemu_irq cpu_irq[4];
MemoryRegion *sysram;
MemoryRegion *dram;
MemoryRegion *sysmem;
char *sysboot_filename;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
for (n = 0; n < smp_cpus; n++) {
ARMCPU *cpu;
cpu = cpu_arm_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
env = &cpu->env;
/* This will become a QOM property eventually */
cpu->reset_cbar = GIC_BASE_ADDR;
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
sysmem = get_system_memory();
dram = g_new(MemoryRegion, 1);
memory_region_init_ram(dram, "highbank.dram", ram_size);
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, dram);
sysram = g_new(MemoryRegion, 1);
memory_region_init_ram(sysram, "highbank.sysram", 0x8000);
memory_region_add_subregion(sysmem, 0xfff88000, sysram);
if (bios_name != NULL) {
sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (sysboot_filename != NULL) {
uint32_t filesize = get_image_size(sysboot_filename);
if (load_image_targphys("sysram.bin", 0xfff88000, filesize) < 0) {
hw_error("Unable to load %s\n", bios_name);
}
} else {
hw_error("Unable to find %s\n", bios_name);
}
}
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, GIC_BASE_ADDR);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
for (n = 0; n < 128; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = qdev_create(NULL, "l2x0");
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, 0xfff12000);
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
sysbus_create_simple("pl011", 0xfff36000, pic[20]);
dev = qdev_create(NULL, "highbank-regs");
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, 0xfff3c000);
sysbus_create_simple("pl061", 0xfff30000, pic[14]);
sysbus_create_simple("pl061", 0xfff31000, pic[15]);
sysbus_create_simple("pl061", 0xfff32000, pic[16]);
sysbus_create_simple("pl061", 0xfff33000, pic[17]);
sysbus_create_simple("pl031", 0xfff35000, pic[19]);
sysbus_create_simple("pl022", 0xfff39000, pic[23]);
sysbus_create_simple("sysbus-ahci", 0xffe08000, pic[83]);
if (nd_table[0].vlan) {
qemu_check_nic_model(&nd_table[0], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff50000);
sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[77]);
sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[78]);
sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[79]);
qemu_check_nic_model(&nd_table[1], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[1]);
qdev_init_nofail(dev);
sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xfff51000);
sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[80]);
sysbus_connect_irq(sysbus_from_qdev(dev), 1, pic[81]);
sysbus_connect_irq(sysbus_from_qdev(dev), 2, pic[82]);
}
highbank_binfo.ram_size = ram_size;
highbank_binfo.kernel_filename = kernel_filename;
highbank_binfo.kernel_cmdline = kernel_cmdline;
highbank_binfo.initrd_filename = initrd_filename;
/* highbank requires a dtb in order to boot, and the dtb will override
* the board ID. The following value is ignored, so set it to -1 to be
* clear that the value is meaningless.
*/
highbank_binfo.board_id = -1;
highbank_binfo.nb_cpus = smp_cpus;
highbank_binfo.loader_start = 0;
highbank_binfo.write_secondary_boot = hb_write_secondary;
highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
arm_load_kernel(first_cpu, &highbank_binfo);
}
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
{
int i;
AspeedSoCState *s = ASPEED_SOC(dev);
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
Error *err = NULL, *local_err = NULL;
/* IO space */
create_unimplemented_device("aspeed_soc.io",
ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE);
/* CPU */
object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
/* SRAM */
memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram",
sc->info->sram_size, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE,
&s->sram);
/* SCU */
object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE);
/* VIC */
object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
/* Timer */
object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE);
for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
}
/* UART - attach an 8250 to the IO space as our UART5 */
if (serial_hd(0)) {
qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
serial_mm_init(get_system_memory(),
ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
}
/* I2C */
object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 12));
/* FMC, The number of CS is set at the board level */
object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
s->fmc.ctrl->flash_window_base);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 19));
/* SPI */
for (i = 0; i < sc->info->spis_num; i++) {
object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err);
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
&local_err);
error_propagate(&err, local_err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
s->spi[i].ctrl->flash_window_base);
}
/* SDMC - SDRAM Memory Controller */
object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE);
/* Watch dog */
for (i = 0; i < sc->info->wdts_num; i++) {
object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
ASPEED_SOC_WDT_BASE + i * 0x20);
}
/* Net */
qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]);
object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err);
object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized",
&local_err);
error_propagate(&err, local_err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
qdev_get_gpio_in(DEVICE(&s->vic), 2));
}
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
{
ram_addr_t ram_size = machine->ram_size;
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
DeviceState *dev = NULL;
SysBusDevice *busdev;
qemu_irq pic[128];
int n;
qemu_irq cpu_irq[4];
MemoryRegion *sysram;
MemoryRegion *dram;
MemoryRegion *sysmem;
char *sysboot_filename;
if (!cpu_model) {
switch (machine_id) {
case CALXEDA_HIGHBANK:
cpu_model = "cortex-a9";
break;
case CALXEDA_MIDWAY:
cpu_model = "cortex-a15";
break;
}
}
for (n = 0; n < smp_cpus; n++) {
ObjectClass *oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
Object *cpuobj;
ARMCPU *cpu;
Error *err = NULL;
if (!oc) {
error_report("Unable to find CPU definition");
exit(1);
}
cpuobj = object_new(object_class_get_name(oc));
cpu = ARM_CPU(cpuobj);
/* By default A9 and A15 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
* realization.
*/
if (object_property_find(cpuobj, "has_el3", NULL)) {
object_property_set_bool(cpuobj, false, "has_el3", &err);
if (err) {
error_report_err(err);
exit(1);
}
}
if (object_property_find(cpuobj, "reset-cbar", NULL)) {
object_property_set_int(cpuobj, MPCORE_PERIPHBASE,
"reset-cbar", &error_abort);
}
object_property_set_bool(cpuobj, true, "realized", &err);
if (err) {
error_report_err(err);
exit(1);
}
cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
}
sysmem = get_system_memory();
dram = g_new(MemoryRegion, 1);
memory_region_allocate_system_memory(dram, NULL, "highbank.dram", ram_size);
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, dram);
sysram = g_new(MemoryRegion, 1);
memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000,
&error_abort);
memory_region_add_subregion(sysmem, 0xfff88000, sysram);
if (bios_name != NULL) {
sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (sysboot_filename != NULL) {
if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
hw_error("Unable to load %s\n", bios_name);
}
g_free(sysboot_filename);
} else {
hw_error("Unable to find %s\n", bios_name);
}
}
switch (machine_id) {
case CALXEDA_HIGHBANK:
dev = qdev_create(NULL, "l2x0");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff12000);
dev = qdev_create(NULL, "a9mpcore_priv");
break;
case CALXEDA_MIDWAY:
dev = qdev_create(NULL, "a15mpcore_priv");
break;
}
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
for (n = 0; n < 128; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
sysbus_create_simple("pl011", 0xfff36000, pic[20]);
dev = qdev_create(NULL, "highbank-regs");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff3c000);
sysbus_create_simple("pl061", 0xfff30000, pic[14]);
sysbus_create_simple("pl061", 0xfff31000, pic[15]);
sysbus_create_simple("pl061", 0xfff32000, pic[16]);
sysbus_create_simple("pl061", 0xfff33000, pic[17]);
sysbus_create_simple("pl031", 0xfff35000, pic[19]);
sysbus_create_simple("pl022", 0xfff39000, pic[23]);
sysbus_create_simple("sysbus-ahci", 0xffe08000, pic[83]);
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);
qemu_check_nic_model(&nd_table[1], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[1]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
}
highbank_binfo.ram_size = ram_size;
highbank_binfo.kernel_filename = kernel_filename;
highbank_binfo.kernel_cmdline = kernel_cmdline;
highbank_binfo.initrd_filename = initrd_filename;
/* highbank requires a dtb in order to boot, and the dtb will override
* the board ID. The following value is ignored, so set it to -1 to be
* clear that the value is meaningless.
*/
highbank_binfo.board_id = -1;
highbank_binfo.nb_cpus = smp_cpus;
highbank_binfo.loader_start = 0;
highbank_binfo.write_secondary_boot = hb_write_secondary;
highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}
static void fsl_imx25_realize(DeviceState *dev, Error **errp)
{
FslIMX25State *s = FSL_IMX25(dev);
uint8_t i;
Error *err = NULL;
object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
object_property_set_bool(OBJECT(&s->avic), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->avic), 0, FSL_IMX25_AVIC_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 0,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->avic), 1,
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
object_property_set_bool(OBJECT(&s->ccm), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX25_CCM_ADDR);
/* Initialize all UARTs */
for (i = 0; i < FSL_IMX25_NUM_UARTS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} serial_table[FSL_IMX25_NUM_UARTS] = {
{ FSL_IMX25_UART1_ADDR, FSL_IMX25_UART1_IRQ },
{ FSL_IMX25_UART2_ADDR, FSL_IMX25_UART2_IRQ },
{ FSL_IMX25_UART3_ADDR, FSL_IMX25_UART3_IRQ },
{ FSL_IMX25_UART4_ADDR, FSL_IMX25_UART4_IRQ },
{ FSL_IMX25_UART5_ADDR, FSL_IMX25_UART5_IRQ }
};
if (i < MAX_SERIAL_PORTS) {
CharDriverState *chr;
chr = serial_hds[i];
if (!chr) {
char label[20];
snprintf(label, sizeof(label), "imx31.uart%d", i);
chr = qemu_chr_new(label, "null", NULL);
}
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", chr);
}
object_property_set_bool(OBJECT(&s->uart[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
qdev_get_gpio_in(DEVICE(&s->avic),
serial_table[i].irq));
}
/* Initialize all GPT timers */
for (i = 0; i < FSL_IMX25_NUM_GPTS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} gpt_table[FSL_IMX25_NUM_GPTS] = {
{ FSL_IMX25_GPT1_ADDR, FSL_IMX25_GPT1_IRQ },
{ FSL_IMX25_GPT2_ADDR, FSL_IMX25_GPT2_IRQ },
{ FSL_IMX25_GPT3_ADDR, FSL_IMX25_GPT3_IRQ },
{ FSL_IMX25_GPT4_ADDR, FSL_IMX25_GPT4_IRQ }
};
s->gpt[i].ccm = DEVICE(&s->ccm);
object_property_set_bool(OBJECT(&s->gpt[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, gpt_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
qdev_get_gpio_in(DEVICE(&s->avic),
gpt_table[i].irq));
}
/* Initialize all EPIT timers */
for (i = 0; i < FSL_IMX25_NUM_EPITS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} epit_table[FSL_IMX25_NUM_EPITS] = {
{ FSL_IMX25_EPIT1_ADDR, FSL_IMX25_EPIT1_IRQ },
{ FSL_IMX25_EPIT2_ADDR, FSL_IMX25_EPIT2_IRQ }
};
s->epit[i].ccm = DEVICE(&s->ccm);
object_property_set_bool(OBJECT(&s->epit[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
qdev_get_gpio_in(DEVICE(&s->avic),
epit_table[i].irq));
}
qdev_set_nic_properties(DEVICE(&s->fec), &nd_table[0]);
object_property_set_bool(OBJECT(&s->fec), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fec), 0, FSL_IMX25_FEC_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->fec), 0,
qdev_get_gpio_in(DEVICE(&s->avic), FSL_IMX25_FEC_IRQ));
/* Initialize all I2C */
for (i = 0; i < FSL_IMX25_NUM_I2CS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} i2c_table[FSL_IMX25_NUM_I2CS] = {
{ FSL_IMX25_I2C1_ADDR, FSL_IMX25_I2C1_IRQ },
{ FSL_IMX25_I2C2_ADDR, FSL_IMX25_I2C2_IRQ },
{ FSL_IMX25_I2C3_ADDR, FSL_IMX25_I2C3_IRQ }
};
object_property_set_bool(OBJECT(&s->i2c[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
qdev_get_gpio_in(DEVICE(&s->avic),
i2c_table[i].irq));
}
/* Initialize all GPIOs */
for (i = 0; i < FSL_IMX25_NUM_GPIOS; i++) {
static const struct {
hwaddr addr;
unsigned int irq;
} gpio_table[FSL_IMX25_NUM_GPIOS] = {
{ FSL_IMX25_GPIO1_ADDR, FSL_IMX25_GPIO1_IRQ },
{ FSL_IMX25_GPIO2_ADDR, FSL_IMX25_GPIO2_IRQ },
{ FSL_IMX25_GPIO3_ADDR, FSL_IMX25_GPIO3_IRQ },
{ FSL_IMX25_GPIO4_ADDR, FSL_IMX25_GPIO4_IRQ }
};
object_property_set_bool(OBJECT(&s->gpio[i]), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr);
/* Connect GPIO IRQ to PIC */
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
qdev_get_gpio_in(DEVICE(&s->avic),
gpio_table[i].irq));
}
/* initialize 2 x 16 KB ROM */
memory_region_init_rom_device(&s->rom[0], NULL, NULL, NULL,
"imx25.rom0", FSL_IMX25_ROM0_SIZE, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX25_ROM0_ADDR,
&s->rom[0]);
memory_region_init_rom_device(&s->rom[1], NULL, NULL, NULL,
"imx25.rom1", FSL_IMX25_ROM1_SIZE, &err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX25_ROM1_ADDR,
&s->rom[1]);
/* initialize internal RAM (128 KB) */
memory_region_init_ram(&s->iram, NULL, "imx25.iram", FSL_IMX25_IRAM_SIZE,
&err);
if (err) {
error_propagate(errp, err);
return;
}
memory_region_add_subregion(get_system_memory(), FSL_IMX25_IRAM_ADDR,
&s->iram);
vmstate_register_ram_global(&s->iram);
/* internal RAM (128 KB) is aliased over 128 MB - 128 KB */
memory_region_init_alias(&s->iram_alias, NULL, "imx25.iram_alias",
&s->iram, 0, FSL_IMX25_IRAM_ALIAS_SIZE);
memory_region_add_subregion(get_system_memory(), FSL_IMX25_IRAM_ALIAS_ADDR,
&s->iram_alias);
}
static void aw_a10_realize(DeviceState *dev, Error **errp)
{
AwA10State *s = AW_A10(dev);
SysBusDevice *sysbusdev;
uint8_t i;
qemu_irq fiq, irq;
Error *err = NULL;
object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
irq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ);
fiq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ);
object_property_set_bool(OBJECT(&s->intc), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->intc);
sysbus_mmio_map(sysbusdev, 0, AW_A10_PIC_REG_BASE);
sysbus_connect_irq(sysbusdev, 0, irq);
sysbus_connect_irq(sysbusdev, 1, fiq);
for (i = 0; i < AW_A10_PIC_INT_NR; i++) {
s->irq[i] = qdev_get_gpio_in(DEVICE(&s->intc), i);
}
object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->timer);
sysbus_mmio_map(sysbusdev, 0, AW_A10_PIT_REG_BASE);
sysbus_connect_irq(sysbusdev, 0, s->irq[22]);
sysbus_connect_irq(sysbusdev, 1, s->irq[23]);
sysbus_connect_irq(sysbusdev, 2, s->irq[24]);
sysbus_connect_irq(sysbusdev, 3, s->irq[25]);
sysbus_connect_irq(sysbusdev, 4, s->irq[67]);
sysbus_connect_irq(sysbusdev, 5, s->irq[68]);
memory_region_init_ram(&s->sram_a, OBJECT(dev), "sram A", 48 * KiB,
&error_fatal);
memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a);
create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB);
/* FIXME use qdev NIC properties instead of nd_table[] */
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC);
qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
}
object_property_set_bool(OBJECT(&s->emac), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbusdev = SYS_BUS_DEVICE(&s->emac);
sysbus_mmio_map(sysbusdev, 0, AW_A10_EMAC_BASE);
sysbus_connect_irq(sysbusdev, 0, s->irq[55]);
object_property_set_bool(OBJECT(&s->sata), true, "realized", &err);
if (err) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, AW_A10_SATA_BASE);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, s->irq[56]);
/* FIXME use a qdev chardev prop instead of serial_hd() */
serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2, s->irq[1],
115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
}
static int fdt_init_qdev(char *node_path, FDTMachineInfo *fdti, char *compat)
{
int err;
qemu_irq irq;
hwaddr base;
int offset;
DeviceState *dev;
char *dev_type = NULL;
int is_intc;
int i;
dev = fdt_create_qdev_from_compat(compat, &dev_type);
if (!dev) {
DB_PRINT("no match found for %s\n", compat);
return 1;
}
/* FIXME: attach to the sysbus instead */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
qemu_fdt_get_node_name(fdti->fdt, node_path),
OBJECT(dev), NULL);
fdt_init_set_opaque(fdti, node_path, dev);
/* connect nic if appropriate */
static int nics;
if (object_property_find(OBJECT(dev), "mac", NULL)) {
qdev_set_nic_properties(dev, &nd_table[nics]);
if (nd_table[nics].instantiated) {
DB_PRINT("NIC instantiated: %s\n", dev_type);
nics++;
}
}
offset = fdt_path_offset(fdti->fdt, node_path);
for (offset = fdt_first_property_offset(fdti->fdt, offset);
offset != -FDT_ERR_NOTFOUND;
offset = fdt_next_property_offset(fdti->fdt, offset)) {
const char *propname;
int len;
const void *val = fdt_getprop_by_offset(fdti->fdt, offset,
&propname, &len);
propname = trim_vendor(propname);
ObjectProperty *p = object_property_find(OBJECT(dev), propname, NULL);
if (p) {
DB_PRINT("matched property: %s of type %s, len %d\n",
propname, p->type, len);
}
if (!p) {
continue;
}
/* FIXME: handle generically using accessors and stuff */
if (!strcmp(p->type, "uint8") || !strcmp(p->type, "uint16") ||
!strcmp(p->type, "uint32") || !strcmp(p->type, "uint64")) {
uint64_t offset = (!strcmp(propname, "reg")) ?
fdt_get_parent_base(node_path, fdti) : 0;
object_property_set_int(OBJECT(dev), get_int_be(val, len) + offset,
propname, &error_abort);
DB_PRINT("set property %s to %#llx\n", propname,
(long long unsigned int)get_int_be(val, len));
} else if (!strcmp(p->type, "bool")) {
object_property_set_bool(OBJECT(dev), !!get_int_be(val, len),
propname, &error_abort);
DB_PRINT("set property %s to %#llx\n", propname,
(long long unsigned int)get_int_be(val, len));
} else if (!strncmp(p->type, "link", 4)) {
char target_node_path[DT_PATH_LENGTH];
DeviceState *linked_dev;
if (qemu_fdt_get_node_by_phandle(fdti->fdt, target_node_path,
get_int_be(val, len))) {
abort();
}
while (!fdt_init_has_opaque(fdti, target_node_path)) {
fdt_init_yield(fdti);
}
linked_dev = fdt_init_get_opaque(fdti, target_node_path);
object_property_set_link(OBJECT(dev), OBJECT(linked_dev), propname,
&error_abort);
} else if (!strcmp(p->type, "string")) {
object_property_set_str(OBJECT(dev), strndup(val, len), propname, &error_abort);
}
}
qdev_init_nofail(dev);
/* map slave attachment */
base = qemu_fdt_getprop_cell(fdti->fdt, node_path, "reg", 0, false, &error_abort);
base += fdt_get_parent_base(node_path, fdti);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
{
int len;
fdt_get_property(fdti->fdt, fdt_path_offset(fdti->fdt, node_path),
"interrupt-controller", &len);
is_intc = len >= 0;
DB_PRINT("is interrupt controller: %c\n", is_intc ? 'y' : 'n');
}
/* connect irq */
for (i = 0; ; ++i) {
char irq_info[1024];
irq = fdt_get_irq_info(fdti, node_path, i, &err, irq_info);
/* INTCs inferr their top level, if no IRQ connection specified */
if (err && is_intc) {
irq = fdti->irq_base;
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
fprintf(stderr, "FDT: (%s) connected top level irq %s\n", dev_type,
irq_info);
break;
}
if (!err) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
fprintf(stderr, "FDT: (%s) connected irq %s\n", dev_type, irq_info);
} else {
break;
}
}
if (dev_type) {
g_free(dev_type);
}
return 0;
}
/* PC hardware initialisation */
static void s390_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL;
ram_addr_t ram_addr;
ram_addr_t kernel_size = 0;
ram_addr_t initrd_offset;
ram_addr_t initrd_size = 0;
int i;
/* XXX we only work on KVM for now */
if (!kvm_enabled()) {
fprintf(stderr, "The S390 target only works with KVM enabled\n");
exit(1);
}
/* get a BUS */
s390_bus = s390_virtio_bus_init(&ram_size);
/* allocate RAM */
ram_addr = qemu_ram_alloc(NULL, "s390.ram", ram_size);
cpu_register_physical_memory(0, ram_size, ram_addr);
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "host";
}
ipi_states = qemu_malloc(sizeof(CPUState *) * smp_cpus);
for (i = 0; i < smp_cpus; i++) {
CPUState *tmp_env;
tmp_env = cpu_init(cpu_model);
if (!env) {
env = tmp_env;
}
ipi_states[i] = tmp_env;
tmp_env->halted = 1;
tmp_env->exception_index = EXCP_HLT;
}
env->halted = 0;
env->exception_index = 0;
if (kernel_filename) {
kernel_size = load_image(kernel_filename, qemu_get_ram_ptr(0));
if (lduw_phys(KERN_IMAGE_START) != 0x0dd0) {
fprintf(stderr, "Specified image is not an s390 boot image\n");
exit(1);
}
env->psw.addr = KERN_IMAGE_START;
env->psw.mask = 0x0000000180000000ULL;
} else {
ram_addr_t bios_size = 0;
char *bios_filename;
/* Load zipl bootloader */
if (bios_name == NULL) {
bios_name = ZIPL_FILENAME;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
bios_size = load_image(bios_filename, qemu_get_ram_ptr(ZIPL_LOAD_ADDR));
qemu_free(bios_filename);
if ((long)bios_size < 0) {
hw_error("could not load bootloader '%s'\n", bios_name);
}
if (bios_size > 4096) {
hw_error("stage1 bootloader is > 4k\n");
}
env->psw.addr = ZIPL_START;
env->psw.mask = 0x0000000180000000ULL;
}
if (initrd_filename) {
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image(initrd_filename, qemu_get_ram_ptr(initrd_offset));
stq_phys(INITRD_PARM_START, initrd_offset);
stq_phys(INITRD_PARM_SIZE, initrd_size);
}
if (kernel_cmdline) {
cpu_physical_memory_rw(KERN_PARM_AREA, (uint8_t *)kernel_cmdline,
strlen(kernel_cmdline), 1);
}
/* Create VirtIO network adapters */
for(i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
DeviceState *dev;
if (!nd->model) {
nd->model = qemu_strdup("virtio");
}
if (strcmp(nd->model, "virtio")) {
fprintf(stderr, "S390 only supports VirtIO nics\n");
exit(1);
}
dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* Create VirtIO disk drives */
for(i = 0; i < MAX_BLK_DEVS; i++) {
DriveInfo *dinfo;
DeviceState *dev;
dinfo = drive_get(IF_IDE, 0, i);
if (!dinfo) {
continue;
}
dev = qdev_create((BusState *)s390_bus, "virtio-blk-s390");
qdev_prop_set_drive_nofail(dev, "drive", dinfo->bdrv);
qdev_init_nofail(dev);
}
}
/* PC hardware initialisation */
static void s390_init(ram_addr_t my_ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
ram_addr_t kernel_size = 0;
ram_addr_t initrd_offset;
ram_addr_t initrd_size = 0;
int shift = 0;
uint8_t *storage_keys;
void *virtio_region;
target_phys_addr_t virtio_region_len;
target_phys_addr_t virtio_region_start;
int i;
/* s390x ram size detection needs a 16bit multiplier + an increment. So
guests > 64GB can be specified in 2MB steps etc. */
while ((my_ram_size >> (20 + shift)) > 65535) {
shift++;
}
my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
/* lets propagate the changed ram size into the global variable. */
ram_size = my_ram_size;
/* get a BUS */
s390_bus = s390_virtio_bus_init(&my_ram_size);
/* allocate RAM */
memory_region_init_ram(ram, "s390.ram", my_ram_size);
vmstate_register_ram_global(ram);
memory_region_add_subregion(sysmem, 0, ram);
/* clear virtio region */
virtio_region_len = my_ram_size - ram_size;
virtio_region_start = ram_size;
virtio_region = cpu_physical_memory_map(virtio_region_start,
&virtio_region_len, true);
memset(virtio_region, 0, virtio_region_len);
cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
virtio_region_len);
/* allocate storage keys */
storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "host";
}
ipi_states = g_malloc(sizeof(CPUState *) * smp_cpus);
for (i = 0; i < smp_cpus; i++) {
CPUState *tmp_env;
tmp_env = cpu_init(cpu_model);
if (!env) {
env = tmp_env;
}
ipi_states[i] = tmp_env;
tmp_env->halted = 1;
tmp_env->exception_index = EXCP_HLT;
tmp_env->storage_keys = storage_keys;
}
/* One CPU has to run */
s390_add_running_cpu(env);
if (kernel_filename) {
kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL,
NULL, 1, ELF_MACHINE, 0);
if (kernel_size == -1UL) {
kernel_size = load_image_targphys(kernel_filename, 0, ram_size);
}
/*
* we can not rely on the ELF entry point, since up to 3.2 this
* value was 0x800 (the SALIPL loader) and it wont work. For
* all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine.
*/
env->psw.addr = KERN_IMAGE_START;
env->psw.mask = 0x0000000180000000ULL;
} else {
ram_addr_t bios_size = 0;
char *bios_filename;
/* Load zipl bootloader */
if (bios_name == NULL) {
bios_name = ZIPL_FILENAME;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096);
g_free(bios_filename);
if ((long)bios_size < 0) {
hw_error("could not load bootloader '%s'\n", bios_name);
}
if (bios_size > 4096) {
hw_error("stage1 bootloader is > 4k\n");
}
env->psw.addr = ZIPL_START;
env->psw.mask = 0x0000000180000000ULL;
}
if (initrd_filename) {
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image_targphys(initrd_filename, initrd_offset,
ram_size - initrd_offset);
/* we have to overwrite values in the kernel image, which are "rom" */
memcpy(rom_ptr(INITRD_PARM_START), &initrd_offset, 8);
memcpy(rom_ptr(INITRD_PARM_SIZE), &initrd_size, 8);
}
if (kernel_cmdline) {
/* we have to overwrite values in the kernel image, which are "rom" */
memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline,
strlen(kernel_cmdline) + 1);
}
/* Create VirtIO network adapters */
for(i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
DeviceState *dev;
if (!nd->model) {
nd->model = g_strdup("virtio");
}
if (strcmp(nd->model, "virtio")) {
fprintf(stderr, "S390 only supports VirtIO nics\n");
exit(1);
}
dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* Create VirtIO disk drives */
for(i = 0; i < MAX_BLK_DEVS; i++) {
DriveInfo *dinfo;
DeviceState *dev;
dinfo = drive_get(IF_IDE, 0, i);
if (!dinfo) {
continue;
}
dev = qdev_create((BusState *)s390_bus, "virtio-blk-s390");
qdev_prop_set_drive_nofail(dev, "drive", dinfo->bdrv);
qdev_init_nofail(dev);
}
}
static void sun4uv_init(MemoryRegion *address_space_mem,
MachineState *machine,
const struct hwdef *hwdef)
{
SPARCCPU *cpu;
Nvram *nvram;
unsigned int i;
uint64_t initrd_addr, initrd_size, kernel_addr, kernel_size, kernel_entry;
SabreState *sabre;
PCIBus *pci_bus, *pci_busA, *pci_busB;
PCIDevice *ebus, *pci_dev;
SysBusDevice *s;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DeviceState *iommu, *dev;
FWCfgState *fw_cfg;
NICInfo *nd;
MACAddr macaddr;
bool onboard_nic;
/* init CPUs */
cpu = sparc64_cpu_devinit(machine->cpu_type, hwdef->prom_addr);
/* IOMMU */
iommu = qdev_create(NULL, TYPE_SUN4U_IOMMU);
qdev_init_nofail(iommu);
/* set up devices */
ram_init(0, machine->ram_size);
prom_init(hwdef->prom_addr, bios_name);
/* Init sabre (PCI host bridge) */
sabre = SABRE_DEVICE(qdev_create(NULL, TYPE_SABRE));
qdev_prop_set_uint64(DEVICE(sabre), "special-base", PBM_SPECIAL_BASE);
qdev_prop_set_uint64(DEVICE(sabre), "mem-base", PBM_MEM_BASE);
object_property_set_link(OBJECT(sabre), OBJECT(iommu), "iommu",
&error_abort);
qdev_init_nofail(DEVICE(sabre));
/* Wire up PCI interrupts to CPU */
for (i = 0; i < IVEC_MAX; i++) {
qdev_connect_gpio_out_named(DEVICE(sabre), "ivec-irq", i,
qdev_get_gpio_in_named(DEVICE(cpu), "ivec-irq", i));
}
pci_bus = PCI_HOST_BRIDGE(sabre)->bus;
pci_busA = pci_bridge_get_sec_bus(sabre->bridgeA);
pci_busB = pci_bridge_get_sec_bus(sabre->bridgeB);
/* Only in-built Simba APBs can exist on the root bus, slot 0 on busA is
reserved (leaving no slots free after on-board devices) however slots
0-3 are free on busB */
pci_bus->slot_reserved_mask = 0xfffffffc;
pci_busA->slot_reserved_mask = 0xfffffff1;
pci_busB->slot_reserved_mask = 0xfffffff0;
ebus = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 0), true, TYPE_EBUS);
qdev_prop_set_uint64(DEVICE(ebus), "console-serial-base",
hwdef->console_serial_base);
qdev_init_nofail(DEVICE(ebus));
/* Wire up "well-known" ISA IRQs to PBM legacy obio IRQs */
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 7,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_LPT_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 6,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_FDD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 1,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_KBD_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 12,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_MSE_IRQ));
qdev_connect_gpio_out_named(DEVICE(ebus), "isa-irq", 4,
qdev_get_gpio_in_named(DEVICE(sabre), "pbm-irq", OBIO_SER_IRQ));
pci_dev = pci_create_simple(pci_busA, PCI_DEVFN(2, 0), "VGA");
memset(&macaddr, 0, sizeof(MACAddr));
onboard_nic = false;
for (i = 0; i < nb_nics; i++) {
nd = &nd_table[i];
if (!nd->model || strcmp(nd->model, "sunhme") == 0) {
if (!onboard_nic) {
pci_dev = pci_create_multifunction(pci_busA, PCI_DEVFN(1, 1),
true, "sunhme");
memcpy(&macaddr, &nd->macaddr.a, sizeof(MACAddr));
onboard_nic = true;
} else {
pci_dev = pci_create(pci_busB, -1, "sunhme");
}
} else {
pci_dev = pci_create(pci_busB, -1, nd->model);
}
dev = &pci_dev->qdev;
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* If we don't have an onboard NIC, grab a default MAC address so that
* we have a valid machine id */
if (!onboard_nic) {
qemu_macaddr_default_if_unset(&macaddr);
}
ide_drive_get(hd, ARRAY_SIZE(hd));
pci_dev = pci_create(pci_busA, PCI_DEVFN(3, 0), "cmd646-ide");
qdev_prop_set_uint32(&pci_dev->qdev, "secondary", 1);
qdev_init_nofail(&pci_dev->qdev);
pci_ide_create_devs(pci_dev, hd);
/* Map NVRAM into I/O (ebus) space */
nvram = m48t59_init(NULL, 0, 0, NVRAM_SIZE, 1968, 59);
s = SYS_BUS_DEVICE(nvram);
memory_region_add_subregion(pci_address_space_io(ebus), 0x2000,
sysbus_mmio_get_region(s, 0));
initrd_size = 0;
initrd_addr = 0;
kernel_size = sun4u_load_kernel(machine->kernel_filename,
machine->initrd_filename,
ram_size, &initrd_size, &initrd_addr,
&kernel_addr, &kernel_entry);
sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", machine->ram_size,
machine->boot_order,
kernel_addr, kernel_size,
machine->kernel_cmdline,
initrd_addr, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth,
(uint8_t *)&macaddr);
dev = qdev_create(NULL, TYPE_FW_CFG_IO);
qdev_prop_set_bit(dev, "dma_enabled", false);
object_property_add_child(OBJECT(ebus), TYPE_FW_CFG, OBJECT(dev), NULL);
qdev_init_nofail(dev);
memory_region_add_subregion(pci_address_space_io(ebus), BIOS_CFG_IOPORT,
&FW_CFG_IO(dev)->comb_iomem);
fw_cfg = FW_CFG(dev);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_entry);
fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_DEPTH, graphic_depth);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
