static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
void *opaque)
{
UartState *s = opaque;
int ret;
/* instant drain the fifo when there's no back-end */
if (!s->chr) {
s->tx_count = 0;
}
if (!s->tx_count) {
return FALSE;
}
ret = qemu_chr_fe_write(s->chr, s->tx_fifo, s->tx_count);
s->tx_count -= ret;
memmove(s->tx_fifo, s->tx_fifo + ret, s->tx_count);
if (s->tx_count) {
int r = qemu_chr_fe_add_watch(s->chr, G_IO_OUT, cadence_uart_xmit, s);
assert(r);
}
uart_update_status(s);
return FALSE;
}
/* Callback function that's called when the guest sends us data */
static ssize_t flush_buf(VirtIOSerialPort *port,
const uint8_t *buf, ssize_t len)
{
VirtConsole *vcon = DO_UPCAST(VirtConsole, port, port);
ssize_t ret;
if (!vcon->chr) {
/* If there's no backend, we can just say we consumed all data. */
return len;
}
ret = qemu_chr_fe_write(vcon->chr, buf, len);
trace_virtio_console_flush_buf(port->id, len, ret);
if (ret < len) {
VirtIOSerialPortClass *k = VIRTIO_SERIAL_PORT_GET_CLASS(port);
/*
* Ideally we'd get a better error code than just -1, but
* that's what the chardev interface gives us right now. If
* we had a finer-grained message, like -EPIPE, we could close
* this connection.
*/
if (ret < 0)
ret = 0;
if (!k->is_console) {
virtio_serial_throttle_port(port, true);
if (!vcon->watch) {
vcon->watch = qemu_chr_fe_add_watch(vcon->chr, G_IO_OUT,
chr_write_unblocked, vcon);
}
}
}
return ret;
}
/* Callback function that's called when the guest sends us data */
static ssize_t flush_buf(VirtIOSerialPort *port,
const uint8_t *buf, ssize_t len)
{
VirtConsole *vcon = VIRTIO_CONSOLE(port);
ssize_t ret;
if (!qemu_chr_fe_backend_connected(&vcon->chr)) {
/* If there's no backend, we can just say we consumed all data. */
return len;
}
ret = qemu_chr_fe_write(&vcon->chr, buf, len);
trace_virtio_console_flush_buf(port->id, len, ret);
if (ret < len) {
VirtIOSerialPortClass *k = VIRTIO_SERIAL_PORT_GET_CLASS(port);
/*
* Ideally we'd get a better error code than just -1, but
* that's what the chardev interface gives us right now. If
* we had a finer-grained message, like -EPIPE, we could close
* this connection.
*/
if (ret < 0)
ret = 0;
/* XXX we should be queuing data to send later for the
* console devices too rather than silently dropping
* console data on EAGAIN. The Linux virtio-console
* hvc driver though does sends with spinlocks held,
* so if we enable throttling that'll stall the entire
* guest kernel, not merely the process writing to the
* console.
*
* While we could queue data for later write without
* enabling throttling, this would result in the guest
* being able to trigger arbitrary memory usage in QEMU
* buffering data for later writes.
*
* So fixing this problem likely requires fixing the
* Linux virtio-console hvc driver to not hold spinlocks
* while writing, and instead merely block the process
* that's writing. QEMU would then need some way to detect
* if the guest had the fixed driver too, before we can
* use throttling on host side.
*/
if (!k->is_console) {
virtio_serial_throttle_port(port, true);
if (!vcon->watch) {
vcon->watch = qemu_chr_fe_add_watch(&vcon->chr,
G_IO_OUT|G_IO_HUP,
chr_write_unblocked, vcon);
}
}
}
return ret;
}
static void net_vhost_user_event(void *opaque, int event)
{
const char *name = opaque;
NetClientState *ncs[MAX_QUEUE_NUM];
VhostUserState *s;
Chardev *chr;
Error *err = NULL;
int queues;
queues = qemu_find_net_clients_except(name, ncs,
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues < MAX_QUEUE_NUM);
s = DO_UPCAST(VhostUserState, nc, ncs[0]);
chr = qemu_chr_fe_get_driver(&s->chr);
trace_vhost_user_event(chr->label, event);
switch (event) {
case CHR_EVENT_OPENED:
if (vhost_user_start(queues, ncs, &s->chr) < 0) {
qemu_chr_fe_disconnect(&s->chr);
return;
}
s->watch = qemu_chr_fe_add_watch(&s->chr, G_IO_HUP,
net_vhost_user_watch, s);
qmp_set_link(name, true, &err);
s->started = true;
break;
case CHR_EVENT_CLOSED:
/* a close event may happen during a read/write, but vhost
* code assumes the vhost_dev remains setup, so delay the
* stop & clear to idle.
* FIXME: better handle failure in vhost code, remove bh
*/
if (s->watch) {
AioContext *ctx = qemu_get_current_aio_context();
g_source_remove(s->watch);
s->watch = 0;
qemu_chr_fe_set_handlers(&s->chr, NULL, NULL, NULL, NULL,
NULL, NULL, false);
aio_bh_schedule_oneshot(ctx, chr_closed_bh, opaque);
}
break;
}
if (err) {
error_report_err(err);
}
}
static void net_vhost_user_event(void *opaque, int event)
{
const char *name = opaque;
NetClientState *ncs[MAX_QUEUE_NUM];
VhostUserState *s;
CharDriverState *chr;
Error *err = NULL;
int queues;
queues = qemu_find_net_clients_except(name, ncs,
NET_CLIENT_DRIVER_NIC,
MAX_QUEUE_NUM);
assert(queues < MAX_QUEUE_NUM);
s = DO_UPCAST(VhostUserState, nc, ncs[0]);
chr = qemu_chr_fe_get_driver(&s->chr);
trace_vhost_user_event(chr->label, event);
switch (event) {
case CHR_EVENT_OPENED:
s->watch = qemu_chr_fe_add_watch(&s->chr, G_IO_HUP,
net_vhost_user_watch, s);
if (vhost_user_start(queues, ncs, &s->chr) < 0) {
qemu_chr_fe_disconnect(&s->chr);
return;
}
qmp_set_link(name, true, &err);
s->started = true;
break;
case CHR_EVENT_CLOSED:
qmp_set_link(name, false, &err);
vhost_user_stop(queues, ncs);
g_source_remove(s->watch);
s->watch = 0;
break;
}
if (err) {
error_report_err(err);
}
}
static int chr_be_change(void *opaque)
{
VirtConsole *vcon = opaque;
VirtIOSerialPort *port = VIRTIO_SERIAL_PORT(vcon);
VirtIOSerialPortClass *k = VIRTIO_SERIAL_PORT_GET_CLASS(port);
if (k->is_console) {
qemu_chr_fe_set_handlers(&vcon->chr, chr_can_read, chr_read,
NULL, chr_be_change, vcon, NULL, true);
} else {
qemu_chr_fe_set_handlers(&vcon->chr, chr_can_read, chr_read,
chr_event, chr_be_change, vcon, NULL, false);
}
if (vcon->watch) {
g_source_remove(vcon->watch);
vcon->watch = qemu_chr_fe_add_watch(&vcon->chr,
G_IO_OUT | G_IO_HUP,
chr_write_unblocked, vcon);
}
return 0;
}
