int main(void)
{
int ret;
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);//设置系统中断优先级分组2
delay_init(162);//延时初始化
tim3_init(162);//时钟初始化
sram_init();//SRAM初始化
ads1271_init(0);//ad初始化 参数为0 高速模式
led_init();//LED初始化
read_device_config();//读取flash中设备配置
current_source_init();//恒流源初始化
ethernet_init();//网络初始化
tcp_sever();//建立tcp服务器
while(!is_con());//等待连接
led_link(1);//开启连接灯
while(1)
{
//INT处理部分
ret = deal_int();
if((ret == NET_ERR) || (ret == NET_DISCONNECT))
sys_restart();//重启
//PRE处理部分
ret = deal_pre();
if((ret == NET_ERR) || (ret == NET_DISCONNECT))
sys_restart();//重启
//DIV处理
ret = deal_div();
if((ret == NET_ERR) || (ret == NET_DISCONNECT))
sys_restart();//重启
//STA处理
ret = deal_sta();
if((ret == NET_ERR) || (ret == NET_DISCONNECT))
sys_restart();//重启
//数据传输
while(1)
{
ret = deal_data();
if((ret == NET_ERR) || (ret == NET_DISCONNECT))
sys_restart();//重启
}
}
}
static int jlink_init(void)
{
int ret;
struct jaylink_device **devs;
unsigned int i;
bool found_device;
uint32_t tmp;
char *firmware_version;
struct jaylink_hardware_version hwver;
struct jaylink_hardware_status hwstatus;
ret = jaylink_init(&jayctx);
if (ret != JAYLINK_OK) {
LOG_ERROR("jaylink_init() failed: %s.",
jaylink_strerror_name(ret));
return ERROR_JTAG_INIT_FAILED;
}
ret = jaylink_get_device_list(jayctx, &devs);
if (ret < 0) {
LOG_ERROR("jaylink_get_device_list() failed: %s.",
jaylink_strerror_name(ret));
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
found_device = false;
if (!use_serial_number && !use_usb_address)
LOG_INFO("No device selected, using first device.");
for (i = 0; devs[i]; i++) {
jaylink_device_get_serial_number(devs[i], &tmp);
ret = jaylink_device_get_usb_address(devs[i]);
if (use_usb_address && usb_address != ret)
continue;
if (use_serial_number && tmp != serial_number)
continue;
ret = jaylink_open(devs[i], &devh);
if (ret != JAYLINK_OK) {
LOG_ERROR("Failed to open device: %s.", jaylink_strerror_name(ret));
continue;
}
found_device = true;
break;
}
jaylink_free_device_list(devs, 1);
if (!found_device) {
LOG_ERROR("No J-Link device found.");
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
/*
* Be careful with changing the following initialization sequence because
* some devices are known to be sensitive regarding the order.
*/
ret = jaylink_get_firmware_version(devh, &firmware_version);
if (ret > 0) {
LOG_INFO("%s", firmware_version);
free(firmware_version);
} else if (!ret) {
LOG_WARNING("Device responds empty firmware version string.");
} else {
LOG_ERROR("jaylink_get_firmware_version() failed: %s.",
jaylink_strerror_name(ret));
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
memset(caps, 0, JAYLINK_DEV_EXT_CAPS_SIZE);
ret = jaylink_get_caps(devh, caps);
if (ret != JAYLINK_OK) {
LOG_ERROR("jaylink_get_caps() failed: %s.", jaylink_strerror_name(ret));
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_EXT_CAPS)) {
ret = jaylink_get_extended_caps(devh, caps);
if (ret != JAYLINK_OK) {
LOG_ERROR("jaylink_get_extended_caps() failed: %s.",
jaylink_strerror_name(ret));
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
}
jtag_command_version = JAYLINK_JTAG_V2;
if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_GET_HW_VERSION)) {
ret = jaylink_get_hardware_version(devh, &hwver);
if (ret != JAYLINK_OK) {
LOG_ERROR("Failed to retrieve hardware version: %s.",
jaylink_strerror_name(ret));
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
LOG_INFO("Hardware version: %u.%02u", hwver.major, hwver.minor);
if (hwver.major >= 5)
jtag_command_version = JAYLINK_JTAG_V3;
}
if (iface == JAYLINK_TIF_SWD) {
/*
* Adjust the SWD transaction buffer size in case there is already
* allocated memory on the device. This happens for example if the
* memory for SWO capturing is still allocated because the software
* which used the device before has not been shut down properly.
*/
if (!adjust_swd_buffer_size()) {
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
}
if (jaylink_has_cap(caps, JAYLINK_DEV_CAP_READ_CONFIG)) {
if (!read_device_config(&config)) {
LOG_ERROR("Failed to read device configuration data.");
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
memcpy(&tmp_config, &config, sizeof(struct device_config));
}
ret = jaylink_get_hardware_status(devh, &hwstatus);
if (ret != JAYLINK_OK) {
LOG_ERROR("jaylink_get_hardware_status() failed: %s.",
jaylink_strerror_name(ret));
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
LOG_INFO("VTarget = %u.%03u V", hwstatus.target_voltage / 1000,
hwstatus.target_voltage % 1000);
conn.handle = 0;
conn.pid = 0;
conn.hid = 0;
conn.iid = 0;
conn.cid = 0;
ret = jlink_register();
if (ret != ERROR_OK) {
jaylink_close(devh);
jaylink_exit(jayctx);
return ERROR_JTAG_INIT_FAILED;
}
ret = select_interface();
if (ret != ERROR_OK) {
jaylink_close(devh);
jaylink_exit(jayctx);
return ret;
}
jlink_reset(0, 0);
jtag_sleep(3000);
jlink_tap_init();
jlink_speed(jtag_get_speed_khz());
if (iface == JAYLINK_TIF_JTAG) {
/*
* J-Link devices with firmware version v5 and v6 seems to have an issue
* if the first tap move is not divisible by 8, so we send a TLR on
* first power up.
*/
uint8_t tms = 0xff;
jlink_clock_data(NULL, 0, &tms, 0, NULL, 0, 8);
jlink_flush();
}
return ERROR_OK;
}
