/** @brief Main worker thread function.
*
* This is main worker thread function which implements continuous loop. This
* loop is controlled with the state variable. This function should not be called
* directly but with POSIX thread functions.
*
* @param [in] args Optinal arguments as defined by pthread API functions.
*
*/
void *rp_osc_worker_thread(void *args)
{
rp_osc_worker_state_t old_state, state;
rp_osc_params_t curr_params[PARAMS_NUM];
int fpga_update = 0;
int dec_factor = 0;
int time_vect_update = 0;
uint32_t trig_source = 0;
int params_dirty = 0;
rp_osc_meas_res_t ch1_meas, ch2_meas;
float ch1_max_adc_v = 1, ch2_max_adc_v = 1;
if (wrkr_rp_calib_params != NULL) {
ch1_max_adc_v = osc_fpga_calc_adc_max_v(wrkr_rp_calib_params->fe_ch1_fs_g_hi, 0);
ch2_max_adc_v = osc_fpga_calc_adc_max_v(wrkr_rp_calib_params->fe_ch2_fs_g_hi, 0);
}
pthread_mutex_lock(&rp_osc_ctrl_mutex);
old_state = state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* Continuous thread loop (exited only with 'quit' state) */
while(1) {
/* update states - we save also old state to see if we need to reset
* FPGA
*/
old_state = state;
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
if(rp_osc_params_dirty) {
memcpy(&curr_params, &rp_osc_params,
sizeof(rp_osc_params_t)*PARAMS_NUM);
fpga_update = rp_osc_params_fpga_update;
rp_osc_params_dirty = 0;
dec_factor =
osc_fpga_cnv_time_range_to_dec(curr_params[TIME_RANGE_PARAM].value);
time_vect_update = 1;
}
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* request to stop worker thread, we will shut down */
if(state == rp_osc_quit_state) {
return 0;
}
if(fpga_update) {
osc_fpga_reset();
if(osc_fpga_update_params((curr_params[TRIG_MODE_PARAM].value == 0),
curr_params[TRIG_SRC_PARAM].value,
curr_params[TRIG_EDGE_PARAM].value,
/* Here we could use trigger, but it is safer
* to use start GUI value (it was recalculated
* correctly already in rp_osc_main() so we
* can use it and be sure that all signal
* (even if extended becuase of decimation
* will be covered in the acquisition
*/
/*curr_params[TRIG_DLY_PARAM].value,*/
curr_params[MIN_GUI_PARAM].value,
curr_params[TRIG_LEVEL_PARAM].value,
curr_params[TIME_RANGE_PARAM].value,
curr_params[EQUAL_FILT_PARAM].value,
curr_params[SHAPE_FILT_PARAM].value,
curr_params[GAIN1_PARAM].value,
curr_params[GAIN2_PARAM].value) < 0) {
fprintf(stderr, "Setting of FPGA registers failed\n");
rp_osc_worker_change_state(rp_osc_idle_state);
}
trig_source = osc_fpga_cnv_trig_source(
(curr_params[TRIG_MODE_PARAM].value == 0),
curr_params[TRIG_SRC_PARAM].value,
curr_params[TRIG_EDGE_PARAM].value);
fpga_update = 0;
}
if(state == rp_osc_idle_state) {
usleep(10000);
continue;
}
if(time_vect_update) {
rp_osc_prepare_time_vector((float **)&rp_tmp_signals[0],
dec_factor,
curr_params[MIN_GUI_PARAM].value,
curr_params[MAX_GUI_PARAM].value,
curr_params[TIME_UNIT_PARAM].value);
time_vect_update = 0;
}
/* Start new acquisition only if it is the index 0 (new acquisition) */
float time_delay = curr_params[TRIG_DLY_PARAM].value;
/* Start the writting machine */
osc_fpga_arm_trigger();
/* Be sure to have enough time to load necessary history - wait */
if(time_delay < 0) {
/* time delay is always in seconds - convert to [us] and
* sleep
*/
usleep(round(-1 * time_delay * 1e6));
} else {
usleep(1);
}
/* Start the trigger */
osc_fpga_set_trigger(trig_source);
/* start working */
pthread_mutex_lock(&rp_osc_ctrl_mutex);
old_state = state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
if((state == rp_osc_idle_state) || (state == rp_osc_abort_state)) {
continue;
} else if(state == rp_osc_quit_state) {
break;
}
/* polling until data is ready */
while(1) {
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
params_dirty = rp_osc_params_dirty;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* change in state, abort polling */
if((state != old_state) || params_dirty) {
break;
}
if(osc_fpga_triggered()) {
break;
}
usleep(1000);
}
if((state != old_state) || params_dirty) {
params_dirty = 0;
continue;
}
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
params_dirty = rp_osc_params_dirty;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
if((state != old_state) || params_dirty)
continue;
/* Triggered, decimate & convert the values */
if (wrkr_rp_calib_params != NULL) {
rp_osc_meas_clear(&ch1_meas);
rp_osc_meas_clear(&ch2_meas);
//printf("ch1_max_adc_v=%f\n", ch1_max_adc_v);
//printf("curr_params[GEN_DC_OFFS_1].value=%f\n", curr_params[GEN_DC_OFFS_1].value);
rp_osc_decimate_with_calib((float **)&rp_tmp_signals[1], &rp_fpga_cha_signal[0],
(float **)&rp_tmp_signals[2], &rp_fpga_chb_signal[0],
(float **)&rp_tmp_signals[0], dec_factor,
curr_params[MIN_GUI_PARAM].value,
curr_params[MAX_GUI_PARAM].value,
curr_params[TIME_UNIT_PARAM].value,
&ch1_meas, &ch2_meas, ch1_max_adc_v, ch2_max_adc_v,
curr_params[GEN_DC_OFFS_1].value,
curr_params[GEN_DC_OFFS_2].value);
} else {
rp_osc_decimate((float **)&rp_tmp_signals[1], &rp_fpga_cha_signal[0],
(float **)&rp_tmp_signals[2], &rp_fpga_chb_signal[0],
(float **)&rp_tmp_signals[0], dec_factor,
curr_params[MIN_GUI_PARAM].value,
curr_params[MAX_GUI_PARAM].value,
curr_params[TIME_UNIT_PARAM].value);
}
/* check again for change of state */
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* We have acquisition - if we are in single put state machine
* to idle */
if((state == rp_osc_single_state) ) {
rp_osc_worker_change_state(rp_osc_idle_state);
}
rp_osc_set_signals(rp_tmp_signals, SIGNAL_LENGTH-1);
/* do not loop too fast */
usleep(10000);
}
return 0;
}
/* Main worker thread */
void *rp_osc_worker_thread(void *args)
{
rp_osc_worker_state_t old_state, state;
rp_app_params_t *curr_params = NULL;
int fpga_update = 0;
int dec_factor = 0;
int time_vect_update = 0;
uint32_t trig_source = 0;
int params_dirty = 0;
/* Long acquisition special function */
int long_acq = 0; /* long_acq if acq_time > 1 [s] */
int long_acq_idx = 0;
int long_acq_first_wr_ptr = 0;
int long_acq_last_wr_ptr = 0;
int long_acq_step = 0;
int long_acq_init_trig_ptr;
rp_osc_meas_res_t ch1_meas, ch2_meas;
float ch1_max_adc_v = 1, ch2_max_adc_v = 1;
float max_adc_norm = osc_fpga_calc_adc_max_v(rp_calib_params->fe_ch1_fs_g_hi, 0);
pthread_mutex_lock(&rp_osc_ctrl_mutex);
old_state = state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
while(1) {
/* update states - we also save old state to see if we need to reset
* FPGA
*/
int start_measure = rp_get_params_bode(0);
if(start_measure == 1){
char command[100];
float read_amp = rp_get_params_bode(1);
float read_avg = rp_get_params_bode(2);
float read_dc_bias = rp_get_params_bode(3);
float read_start_freq = rp_get_params_bode(4);
float read_counts = rp_get_params_bode(5);
float read_scale = rp_get_params_bode(6);
float read_end_freq = rp_get_params_bode(9);
char amp[5];
char avg[5];
char dc_bias[5];
char s_freq[20];
char e_freq[20];
char scale[5];
char counts[5];
snprintf(amp, 5, "%f", read_amp);
snprintf(avg, 5, "%f", read_avg);
snprintf(dc_bias, 5, "%f", read_dc_bias);
snprintf(s_freq, 20, "%f", read_start_freq);
snprintf(e_freq,20, "%f", read_end_freq);
snprintf(scale, 5, "%f", read_scale);
snprintf(counts, 5, "%f", read_counts);
strcpy(command, "/opt/www/apps/bode_plotter/bode 1 ");
strcat(command, amp);
strcat(command, " ");
strcat(command, dc_bias);
strcat(command, " ");
strcat(command, avg);
strcat(command, " ");
strcat(command, counts);
strcat(command, " ");
strcat(command, s_freq);
strcat(command, " ");
strcat(command, e_freq);
strcat(command, " ");
strcat(command, scale);
system(command);
rp_set_params_bode(0, 0);
}
old_state = state;
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
/* If there are no new params */
if(rp_osc_params_dirty) {
rp_copy_params(rp_osc_params, (rp_app_params_t **)&curr_params);
fpga_update = rp_osc_params_fpga_update;
rp_osc_params_dirty = 0;
dec_factor =
osc_fpga_cnv_time_range_to_dec(curr_params[TIME_RANGE_PARAM].value);
time_vect_update = 1;
uint32_t fe_fsg1 = (curr_params[GAIN_CH1].value == 0) ?
rp_calib_params->fe_ch1_fs_g_hi :
rp_calib_params->fe_ch1_fs_g_lo;
ch1_max_adc_v =
osc_fpga_calc_adc_max_v(fe_fsg1, (int)curr_params[PRB_ATT_CH1].value);
uint32_t fe_fsg2 = (curr_params[GAIN_CH2].value == 0) ?
rp_calib_params->fe_ch2_fs_g_hi :
rp_calib_params->fe_ch2_fs_g_lo;
ch2_max_adc_v =
osc_fpga_calc_adc_max_v(fe_fsg2, (int)curr_params[PRB_ATT_CH2].value);
}
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* request to stop worker thread, we will shut down */
if(state == rp_osc_quit_state) {
rp_clean_params(curr_params);
return 0;
}
if(state == rp_osc_auto_set_state) {
/* Auto-set algorithm was selected - run it */
rp_osc_auto_set(curr_params, ch1_max_adc_v, ch2_max_adc_v,
curr_params[GEN_DC_OFFS_1].value,
curr_params[GEN_DC_OFFS_2].value,
curr_params[PRB_ATT_CH1].value,
curr_params[PRB_ATT_CH2].value,
curr_params[GAIN_CH1].value,
curr_params[GAIN_CH2].value,
curr_params[EN_AVG_AT_DEC].value);
/* Return calculated parameters to main module */
rp_update_main_params(curr_params);
/* while(1) - loop until break */
continue;
}
if(fpga_update) {
/* Reset write state machine? LG */
osc_fpga_reset();
if(osc_fpga_update_params((curr_params[TRIG_MODE_PARAM].value == 0),
curr_params[TRIG_SRC_PARAM].value,
curr_params[TRIG_EDGE_PARAM].value,
/* Here we could use trigger, but it is safer
* to use start GUI value (it was recalculated
* correctly already in rp_osc_main() so we
* can use it and be sure that all signal
* (even if extended because of decimation
* will be covered in the acquisition
*/
/*curr_params[TRIG_DLY_PARAM].value,*/
curr_params[MIN_GUI_PARAM].value,
curr_params[TRIG_LEVEL_PARAM].value,
curr_params[TIME_RANGE_PARAM].value,
max_adc_norm, max_adc_norm,
rp_calib_params->fe_ch1_dc_offs,
curr_params[GEN_DC_OFFS_1].value,
rp_calib_params->fe_ch2_dc_offs,
curr_params[GEN_DC_OFFS_2].value,
curr_params[PRB_ATT_CH1].value,
curr_params[PRB_ATT_CH2].value,
curr_params[GAIN_CH1].value,
curr_params[GAIN_CH2].value,
curr_params[EN_AVG_AT_DEC].value) < 0) {
fprintf(stderr, "Setting of FPGA registers failed\n");
rp_osc_worker_change_state(rp_osc_idle_state);
}
trig_source = osc_fpga_cnv_trig_source(
(curr_params[TRIG_MODE_PARAM].value == 0),
curr_params[TRIG_SRC_PARAM].value,
curr_params[TRIG_EDGE_PARAM].value);
fpga_update = 0;
}
if(state == rp_osc_idle_state) {
usleep(10000);
continue;
}
/* Time vector update? */
if(time_vect_update) {
float unit_factor =
rp_osc_get_time_unit_factor(curr_params[TIME_UNIT_PARAM].value);
float t_acq = (curr_params[MAX_GUI_PARAM].value -
curr_params[MIN_GUI_PARAM].value) / unit_factor;
rp_osc_prepare_time_vector((float **)&rp_tmp_signals[0],
dec_factor,
curr_params[MIN_GUI_PARAM].value,
curr_params[MAX_GUI_PARAM].value,
curr_params[TIME_UNIT_PARAM].value);
time_vect_update = 0;
/* check if we have long acquisition - if yes the algorithm
* (wait for pre-defined time and return partial signal) */
/* TODO: Make it programmable */
if(t_acq >= 1.5) {
long_acq = 1;
/* Catch initial trigger - we will poll trigger pointer,
* when it changes we will act like official 'trigger'
* came
*/
rp_osc_meas_clear(&ch1_meas);
rp_osc_meas_clear(&ch2_meas);
osc_fpga_get_wr_ptr(NULL, &long_acq_init_trig_ptr);
} else {
long_acq_first_wr_ptr = 0;
long_acq_last_wr_ptr = 0;
long_acq = 0;
}
long_acq_idx = 0;
}
/* Start new acquisition only if it is the index 0 (new acquisition) */
if(long_acq_idx == 0) {
float time_delay = curr_params[TRIG_DLY_PARAM].value;
/* Start the writting machine */
osc_fpga_arm_trigger();
/* Be sure to have enough time to load necessary history - wait */
if(time_delay < 0) {
/* time delay is always in seconds - convert to [us] and
* sleep
*/
usleep(round(-1 * time_delay * 1e6));
} else {
if(curr_params[TIME_RANGE_PARAM].value > 4)
usleep(5000);
else
usleep(1);
}
/* Start the trigger */
osc_fpga_set_trigger(trig_source);
}
/* start working */
pthread_mutex_lock(&rp_osc_ctrl_mutex);
old_state = state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
if((state == rp_osc_idle_state) || (state == rp_osc_abort_state)) {
continue;
} else if(state == rp_osc_quit_state) {
break;
}
if(long_acq_idx == 0) {
/* polling until data is ready */
while(1) {
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
params_dirty = rp_osc_params_dirty;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* change in state, abort polling */
if((state != old_state) || params_dirty) {
break;
}
if(!long_acq && osc_fpga_triggered()) {
/* for non-long acquisition wait for trigger */
break;
} else if(long_acq) {
int trig_ptr, curr_ptr;
osc_fpga_get_wr_ptr(&curr_ptr, &trig_ptr);
if((long_acq_init_trig_ptr != trig_ptr) || osc_fpga_triggered()) {
/* FPGA wrote new trigger pointer - which means
* new trigger happened
*/
break;
}
}
usleep(1000);
}
}
if((state != old_state) || params_dirty) {
params_dirty = 0;
continue;
}
if(long_acq) {
/* Long acquisition - after trigger wait for a while to collect some
* data
*/
/* TODO: Make it programmable - Sleep for 200 [ms] */
const int long_acq_part_delay = 1000 * 200;
if(long_acq_idx == 0) {
/* Trigger - so let's arrange all the needed pointers & stuff */
int wr_ptr_curr, wr_ptr_trig;
float smpl_period = c_osc_fpga_smpl_period * dec_factor;
int t_start_idx =
round(curr_params[MIN_GUI_PARAM].value / smpl_period);
float unit_factor =
rp_osc_get_time_unit_factor(
curr_params[TIME_UNIT_PARAM].value);
float t_acq = (curr_params[MAX_GUI_PARAM].value -
curr_params[MIN_GUI_PARAM].value) /
unit_factor;
osc_fpga_get_wr_ptr(&wr_ptr_curr, &wr_ptr_trig);
long_acq_first_wr_ptr = wr_ptr_trig + t_start_idx - 3;
if(long_acq_first_wr_ptr < 0)
long_acq_first_wr_ptr =
OSC_FPGA_SIG_LEN + long_acq_first_wr_ptr;
long_acq_last_wr_ptr = long_acq_first_wr_ptr +
(t_acq / (c_osc_fpga_smpl_period * dec_factor));
long_acq_last_wr_ptr = long_acq_last_wr_ptr % OSC_FPGA_SIG_LEN;
if(round((t_acq / (c_osc_fpga_smpl_period * dec_factor) /
(((int)rp_get_params_bode(5))-1))) < 0)
long_acq_step = 1;
else
long_acq_step =
round((t_acq / (c_osc_fpga_smpl_period * dec_factor)) /
(((int)rp_get_params_bode(5))-1));
rp_osc_meas_clear(&ch1_meas);
rp_osc_meas_clear(&ch2_meas);
}
/* we are after trigger - so let's wait a while to collect some
* samples */
usleep(long_acq_part_delay); /* Sleep for 200 [ms] */
}
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
params_dirty = rp_osc_params_dirty;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
if((state != old_state) || params_dirty)
continue;
if(!long_acq) {
/* Triggered, decimate & convert the values */
rp_osc_meas_clear(&ch1_meas);
rp_osc_meas_clear(&ch2_meas);
bode_start_measure((float **)&rp_tmp_signals[1], &rp_fpga_cha_signal[0],
(float **)&rp_tmp_signals[2], &rp_fpga_chb_signal[0],
(float **)&rp_tmp_signals[0]);
} else {
long_acq_idx = rp_osc_decimate_partial((float **)&rp_tmp_signals[1],
&rp_fpga_cha_signal[0],
(float **)&rp_tmp_signals[2],
&rp_fpga_chb_signal[0],
(float **)&rp_tmp_signals[0],
&long_acq_first_wr_ptr,
long_acq_last_wr_ptr,
long_acq_step, long_acq_idx,
curr_params[MIN_GUI_PARAM].value,
dec_factor,
curr_params[TIME_UNIT_PARAM].value,
&ch1_meas, &ch2_meas,
ch1_max_adc_v, ch2_max_adc_v,
curr_params[GEN_DC_OFFS_1].value,
curr_params[GEN_DC_OFFS_2].value);
/* Acquisition over, start one more! */
if(long_acq_idx >= ((int)rp_get_params_bode(5))-1) {
long_acq_idx = 0;
osc_fpga_get_wr_ptr(NULL, &long_acq_init_trig_ptr);
if(state == rp_osc_single_state) {
rp_osc_worker_change_state(rp_osc_idle_state);
}
}
}
/* check again for change of state */
pthread_mutex_lock(&rp_osc_ctrl_mutex);
state = rp_osc_ctrl;
pthread_mutex_unlock(&rp_osc_ctrl_mutex);
/* We have acquisition - if we are in single put state machine
* to idle */
if((state == rp_osc_single_state) && (!long_acq)) {
rp_osc_worker_change_state(rp_osc_idle_state);
}
/* copy the results to the user buffer - if we are finished or not */
if(!long_acq || long_acq_idx == 0) {
/* Finish the measurement */
rp_osc_meas_avg_amp(&ch1_meas, OSC_FPGA_SIG_LEN);
rp_osc_meas_avg_amp(&ch2_meas, OSC_FPGA_SIG_LEN);
rp_osc_meas_period(&ch1_meas, &ch2_meas, &rp_fpga_cha_signal[0],
&rp_fpga_chb_signal[0], dec_factor);
rp_osc_meas_convert(&ch1_meas, ch1_max_adc_v, rp_calib_params->fe_ch1_dc_offs);
rp_osc_meas_convert(&ch2_meas, ch2_max_adc_v, rp_calib_params->fe_ch2_dc_offs);
rp_osc_set_meas_data(ch1_meas, ch2_meas);
rp_osc_set_signals(rp_tmp_signals, ((int)rp_get_params_bode(5))-1);
} else {
rp_osc_set_signals(rp_tmp_signals, long_acq_idx);
}
/* do not loop too fast */
usleep(10000);
}
rp_clean_params(curr_params);
return 0;
}
