Exemple #1
0
/* initialize for touch & calibration */
int touch_calibration_init(void)
{
    rt_uint8_t magic = 0;
    calculate_data_t data;
    struct rtgui_calibration_ops *ops;

    ops = calibration_get_ops();

    /* initialization the eeprom  on chip  */
    EEPROM_Init();
    /* initialization the touch driver */
    rtgui_touch_hw_init("spi10");
    /* set callback to save calibration data */
    calibration_set_after(calibration_data_save);
    /* initialization rtgui tonch server */
    rtgui_touch_init(ops);
    /* restore calibration data */
    EEPROM_Read(0, CALIBRATION_DATA_PAGE, &magic, MODE_8_BIT, 1);
    if (CALIBRATION_DATA_MAGIC != magic)
    {
        rt_kprintf("touch is not calibration,now calibration it please.\n");
        calibration_init(RT_NULL);
    }
    else
    {
        EEPROM_Read(CALIBRATION_DATA_OFFSET, CALIBRATION_DATA_PAGE, &data, MODE_8_BIT, sizeof(calculate_data_t));
        calibration_set_data(&data);
    }
    /* power down the EEPROM */
    EEPROM_PowerDown(ENABLE);
    return 0;
}
Exemple #2
0
void rt_init_thread_entry(void* parameter)
{
#ifdef RT_USING_COMPONENTS_INIT
    /* initialization RT-Thread Components */
    rt_components_init();
#endif

#ifdef  RT_USING_FINSH
    finsh_set_device(RT_CONSOLE_DEVICE_NAME);
#endif  /* RT_USING_FINSH */

    /* Filesystem Initialization */
#if defined(RT_USING_DFS) && defined(RT_USING_DFS_ELMFAT)
    /* mount sd card fat partition 1 as root directory */
    if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
    {
        rt_kprintf("File System initialized!\n");
    }
    else
        rt_kprintf("File System initialzation failed!\n");
#endif  /* RT_USING_DFS */

#ifdef RT_USING_RTGUI
    {
        extern void rt_hw_lcd_init();
        extern void rtgui_touch_hw_init(void);

        rt_device_t lcd;

        /* init lcd */
        rt_hw_lcd_init();

        /* init touch panel */
        rtgui_touch_hw_init();

        /* re-init device driver */
        rt_device_init_all();

        /* find lcd device */
        lcd = rt_device_find("lcd");

        /* set lcd device as rtgui graphic driver */
        rtgui_graphic_set_device(lcd);

#ifndef RT_USING_COMPONENTS_INIT
        /* init rtgui system server */
        rtgui_system_server_init();
#endif

        calibration_set_restore(cali_setup);
        calibration_set_after(cali_store);
        calibration_init();
    }
#endif /* #ifdef RT_USING_RTGUI */
}
Exemple #3
0
void rt_platform_init(void)
{
#ifdef RT_USING_SPI
    rt_hw_spi2_init();

#ifdef RT_USING_DFS
    w25qxx_init("flash0", "spi20");
#endif /* RT_USING_DFS */

#ifdef RT_USING_RTGUI
    /* initilize touch panel */
    rtgui_touch_hw_init("spi21");
#endif /* RT_USING_RTGUI */
#endif /* RT_USING_SPI */

#ifdef RT_USING_USB_HOST
    /* register stm32 usb host controller driver */
    rt_hw_susb_init();
#endif

#ifdef RT_USING_DFS
    /* initilize sd card */
#ifdef RT_USING_SDIO
    rt_mmcsd_core_init();
    rt_mmcsd_blk_init();
    stm32f4xx_sdio_init();
    rt_thread_delay(RT_TICK_PER_SECOND);
#else
    rt_hw_sdcard_init();
#endif
#endif /* RT_USING_DFS */

#ifdef RT_USING_RTGUI
    /* initilize ra8875 lcd controller */
    ra8875_init();

    /* initilize key module */
    rt_hw_key_init();
#endif /* RT_USING_RTGUI */

#ifdef RT_USING_RTC
    rt_hw_rtc_init();
#endif /* RT_USING_RTC */

    rt_thread_delay(50);
    rt_device_init_all();
}
Exemple #4
0
void rt_init_thread_entry(void* parameter)
{
	/* initialize LCD drv for GUI */
	rtgui_lcd_init();

	/* Filesystem Initialization */
	mci_hw_init("sd0");
	/* initialize the device file system */
	dfs_init();
	/* initialize the elm chan FatFS file system*/
	elm_init();

	/* mount sd card fat partition 1 as root directory */
	if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
	{
		rt_kprintf("File System initialized!\n");
		
		#if (RT_DFS_ELM_USE_LFN != 0) && (defined RT_DFS_ELM_CODE_PAGE_FILE)
        {
                extern void ff_convert_init(void);
                ff_convert_init();
        }
		#endif
	}
	else 
	{	
		rt_kprintf("File System initialzation failed!\n");
	}	

	/* initialize GUI system */
	rtgui_system_server_init();
	/* initialize keyboard */
	rt_hw_key_init();
	/* initialize touch */
	rt_hw_spi_init();
	rtgui_touch_hw_init();

    /* GUI examples initializtion */
	application_init();
	
	finsh_system_init();
}
void rt_init_thread_entry(void* parameter)
{
/* Filesystem Initialization */
#ifdef RT_USING_DFS
	{
		/* init the device filesystem */
		dfs_init();

#ifdef RT_USING_DFS_ELMFAT
		/* init the elm chan FatFs filesystam*/
		elm_init();

		/* mount sd card fat partition 1 as root directory */
		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
		{
			rt_kprintf("File System initialized!\n");
		}
		else
			rt_kprintf("File System initialzation failed!\n");
#endif
	}
#endif

/* LwIP Initialization */
#ifdef RT_USING_LWIP
	{
		extern void lwip_sys_init(void);

		/* register ethernetif device */
		eth_system_device_init();

#ifdef STM32F10X_CL
		rt_hw_stm32_eth_init();
#else
	/* STM32F103 */
	#if STM32_ETH_IF == 0
			rt_hw_enc28j60_init();
	#elif STM32_ETH_IF == 1
			rt_hw_dm9000_init();
	#endif
#endif

		/* re-init device driver */
		rt_device_init_all();

		/* init lwip system */
		lwip_sys_init();
		rt_kprintf("TCP/IP initialized!\n");
	}
#endif

#ifdef RT_USING_RTGUI
	{
	    extern void rtgui_system_server_init(void);
	    extern void rt_hw_lcd_init();
	    extern void rtgui_touch_hw_init(void);

		rt_device_t lcd;

		/* init lcd */
		rt_hw_lcd_init();

		/* init touch panel */
		rtgui_touch_hw_init();

		/* re-init device driver */
		rt_device_init_all();

		/* find lcd device */
		lcd = rt_device_find("lcd");

		/* set lcd device as rtgui graphic driver */
		rtgui_graphic_set_device(lcd);

		/* init rtgui system server */
		rtgui_system_server_init();
	}
#endif /* #ifdef RT_USING_RTGUI */
}
Exemple #6
0
void rt_init_thread_entry(void *parameter)
{
/* Filesystem Initialization */
#ifdef RT_USING_DFS
	{
		/* init the device filesystem */
		dfs_init();

#if defined(RT_USING_DFS_ELMFAT)
		/* init the elm chan FatFs filesystam*/
		elm_init();
		/* mount sd card fat partition 1 as root directory */
		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
		{
			rt_kprintf("File System initialized!\n");
		}
		else
			rt_kprintf("File System initialzation failed!\n");
#endif

#if defined(RT_USING_DFS_ROMFS)
		dfs_romfs_init();
		if (dfs_mount(RT_NULL, "/rom", "rom", 0, &romfs_root) == 0)
		{
			rt_kprintf("ROM File System initialized!\n");
		}
		else
			rt_kprintf("ROM File System initialzation failed!\n");
#endif

#if defined(RT_USING_DFS_DEVFS)
		devfs_init();
		if (dfs_mount(RT_NULL, "/dev", "devfs", 0, 0) == 0)
			rt_kprintf("Device File System initialized!\n");
		else
			rt_kprintf("Device File System initialzation failed!\n");

		#ifdef RT_USING_NEWLIB
		/* init libc */
		libc_system_init("uart0");
		#endif
#endif

#if defined(RT_USING_DFS) && defined(RT_USING_LWIP) && defined(RT_USING_DFS_NFS)
		/* NFSv3 Initialization */
		nfs_init();

		if (dfs_mount(RT_NULL, "/nfs", "nfs", 0, RT_NFS_HOST_EXPORT) == 0)
			rt_kprintf("NFSv3 File System initialized!\n");
		else
			rt_kprintf("NFSv3 File System initialzation failed!\n");
#endif

#if defined(RT_USING_DFS_UFFS)
		/* init the uffs filesystem */
		dfs_uffs_init();

		/* mount flash device as flash directory */
		if (dfs_mount("nand0", "/nand0", "uffs", 0, 0) == 0)
			rt_kprintf("UFFS File System initialized!\n");
		else
			rt_kprintf("UFFS File System initialzation failed!\n");
#endif
	}
#endif

#ifdef RT_USING_RTGUI
	{
		extern void rtgui_system_server_init(void);

		rt_device_t lcd;

		/* init lcd */
		rt_hw_lcd_init();

		/* init touch panel */
		rtgui_touch_hw_init();

		/* init keypad */
		rt_hw_key_init();

		/* find lcd device */
		lcd = rt_device_find("lcd");

		/* set lcd device as rtgui graphic driver */
		rtgui_graphic_set_device(lcd);

		/* initalize rtgui system server */
		rtgui_system_server_init();
	}
#endif

/* LwIP Initialization */
#ifdef RT_USING_LWIP
	{
		extern void lwip_sys_init(void);
		eth_system_device_init();

		/* register ethernetif device */
		rt_hw_dm9000_init();

		/* init lwip system */
		lwip_sys_init();
		rt_kprintf("TCP/IP initialized!\n");
	}
#endif

#ifdef RT_USING_FTK
	{
		rt_thread_t ftk_thread;

		/* init lcd */
		rt_hw_lcd_init();

		/* init touch panel */
		rtgui_touch_hw_init();

		/* init keypad */
		rt_hw_key_init();

		/* create ftk thread */
		ftk_thread = rt_thread_create("ftk",
									rt_ftk_thread_entry, RT_NULL,
									10 * 1024, 8, 20);

		/* startup ftk thread */
		if (ftk_thread != RT_NULL)
			rt_thread_startup(ftk_thread);
	}
#endif
}
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
    /* Filesystem Initialization */
#ifdef RT_USING_DFS
    {
		extern void ff_convert_init();

        /* init the device filesystem */
        dfs_init();

        /* init the elm FAT filesystam*/
        elm_init();

        /* mount spi flash fat as root directory */
        if (dfs_mount("spi0", "/", "elm", 0, 0) == 0)
        {
            rt_kprintf("SPI File System initialized!\n");

            /* mount sd card fat partition 1 as SD directory */
            if (dfs_mount("sd0", "/SD", "elm", 0, 0) == 0)
                rt_kprintf("SD File System initialized!\n");
            else
                rt_kprintf("SD File System init failed!\n");
        }
        else
            rt_kprintf("SPI File System init failed!\n");

#ifdef RT_DFS_ELM_USE_LFN
		ff_convert_init();
#endif
    }
#endif

    load_setup();

    /* RTGUI Initialization */
#ifdef RT_USING_RTGUI
    {
        extern void rt_hw_key_init(void);
        extern void remote_init(void);
		extern void rtgui_touch_hw_init(void);

        radio_rtgui_init();
        rt_hw_key_init();
		rtgui_touch_hw_init();
        remote_init();
    }
#endif

    /* set default setup */
    {
        extern void vol(uint16_t v);
        extern void brightness_set(unsigned int value);
        vol(radio_setup.default_volume);
        brightness_set(radio_setup.lcd_brightness);
    }

    /* start RTC */
    rt_hw_rtc_init();

    /* LwIP Initialization */
#ifdef RT_USING_LWIP
    {
        extern void lwip_sys_init(void);
        extern void rt_hw_dm9000_init(void);

        eth_system_device_init();

        /* register ethernetif device */
        rt_hw_dm9000_init();
        /* init all device */
        rt_device_init_all();

        /* init lwip system */
        lwip_sys_init();
        rt_kprintf("TCP/IP initialized!\n");
    }
#endif

#if STM32_EXT_SRAM
    /* init netbuf worker */
    net_buf_init(320 * 1024);
#endif

}
void rt_init_thread_entry(void* parameter)
{
#if RT_USING_RTC
	rt_device_t rtc_dev;
#endif
#if TEST_TRAP || EM_ALL_TYPE_BASE || TEST_485
	rt_thread_t thread_h;
#endif
	RT_APPS_INIT_DEBUG(("invoke rt_init_thread_entry()!\n"));

	say_thread_start();

#if TEST_485
	thread_h = rt_thread_create("t485", rt_test_485_entry, RT_NULL, 512, 30, 10);
	if (thread_h != RT_NULL)
		rt_thread_startup(thread_h);
#endif
#if TEST_TRAP
		trap_test_init();
#endif

#if EM_ALL_TYPE_BASE && !TEST_485
	/* recv ptct info server */
	thread_h = rt_thread_create("rpct-ser", recv_em_frame, RT_NULL, 1024, 30, 10);
	if (thread_h != RT_NULL)
		rt_thread_startup(thread_h);
#endif

#if RT_USING_RS485_BUS  && !TEST_485
#if EM_MASTER_DEV || EM_MULTI_MASTER_DEV
	rs485_master_init(); /* David */
#elif WIRELESS_MASTER_NODE
	rs485_slave_init();
#endif
#endif

	/* Filesystem Initialization */
#if RT_USING_FILESYSTEM
	RT_APPS_INIT_DEBUG(("will init fs\n"));
	rt_hw_spiflash_init();
	sf_set_prote_level_to_none();

	/* init the device filesystem */
	dfs_init();
#ifdef RT_USING_DFS_ELMFAT
	/* init the elm chan FatFs filesystam*/
	elm_init();

#if 1
	/* mount spi-flash fat partition 1 as root directory */
	if (dfs_mount("sf0", "/", "elm", 0, 0) == 0)
#else
	/* mount sd card fat partition 1 as root directory */
	if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
#endif
		rt_kprintf("File System initialized!\n");
	else
		rt_kprintf("File System initialzation failed!\n");
#endif

#endif

	/* LwIP Initialization */
#if RT_USING_TCPIP_STACK
	init_tcpip_lwip_stack();
#endif

#if RT_USING_GUI
	{
		extern void rtgui_startup();
		extern void rt_hw_lcd_init();
		extern void rtgui_touch_hw_init(void);

		rt_device_t lcd;

		/* init lcd */
		rt_hw_lcd_init();

		/* init touch panel */
		rtgui_touch_hw_init();

		/* re-init device driver */
		rt_device_init_all();

		/* find lcd device */
		lcd = rt_device_find("lcd");

		/* set lcd device as rtgui graphic driver */
		rtgui_graphic_set_device(lcd);

		/* startup rtgui */
		rtgui_startup();
	}
#endif /* #if RT_USING_GUI */

	nvic_cfg_app();
#if USE_STM32_IWDG
	IWDG_Enable();
#endif

#if RT_USING_RTC
	rtc_dev = rt_device_find("rtc");
	if (NULL != rtc_dev) {
		rtc_dev->control(rtc_dev, RT_DEVICE_CTRL_RTC_CALI_SET, NULL);
	} else {
		rt_kprintf("find rtc device fail\n");
	}
#endif

#if EM_ALL_TYPE_BASE
	extern void sinkinfo_ipc_init(void);
	sinkinfo_ipc_init();
#endif
#if (RT_USING_RS485_BUS && EM_ALL_TYPE_BASE  && !TEST_485)
	ammeter_init();
#endif

#if WIRELESS_MASTER_NODE
	creat_4432master_th();
#elif WIRELESS_SLAVE_NODE /* #if WIRELESS_MASTER_NODE */
	creat_4432slave_th();
#else
	/* none */
#endif /* #if WIRELESS_MASTER_NODE */

#if RT_USING_ADE7880 && !TEST_485
	start_7880();	/* 有较长的延迟, 秒级别, David */
#endif

#if EM_ALL_TYPE_BASE && !TEST_485
	sinkinfo_init();
#endif

}
Exemple #9
0
void rt_init_thread_entry(void* parameter)
{
	rt_hw_sdcard_init();

/* Filesystem Initialization */
#ifdef RT_USING_DFS
	{
		/* init the device filesystem */
		dfs_init();

#if defined(RT_USING_DFS_ELMFAT)
		/* init the elm chan FatFs filesystam*/
		elm_init();

		/* mount sd card fat partition 1 as root directory */
		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
		{
			rt_kprintf("File System initialized!\n");
		}
		else
			rt_kprintf("File System initialzation failed!\n");
#endif

#if defined(RT_USING_DFS_ROMFS)
		dfs_romfs_init();
		if (dfs_mount(RT_NULL, "/rom", "rom", 0, &romfs_root) == 0)
		{
			rt_kprintf("ROM File System initialized!\n");
		}
		else
			rt_kprintf("ROM File System initialzation failed!\n");
#endif

#if defined(RT_USING_DFS_DEVFS)
		devfs_init();
		if (dfs_mount(RT_NULL, "/dev", "devfs", 0, 0) == 0)
			rt_kprintf("Device File System initialized!\n");
		else
			rt_kprintf("Device File System initialzation failed!\n");

		#ifdef RT_USING_NEWLIB
		/* init libc */
		libc_system_init("uart0");
		#endif
#endif

#if defined(RT_USING_DFS_UFFS)
	{
		/* init the uffs filesystem */
		dfs_uffs_init();

		/* mount flash device as flash directory */
		if(dfs_mount("nand0", "/nand0", "uffs", 0, 0) == 0)
			rt_kprintf("UFFS File System initialized!\n");
		else
			rt_kprintf("UFFS File System initialzation failed!\n");
	}
#endif
	}
#endif

#ifdef RT_USING_RTGUI
	{
		/* init lcd */
		rt_hw_lcd_init();
			
		/* init touch panel */
		rtgui_touch_hw_init();	

		/* init keypad */
		rt_hw_key_init();
		
		/* re-init device driver */
		rt_device_init_all();

		/* startup rtgui */
		//rtgui_startup();
	}
#endif

/* LwIP Initialization */
#ifdef RT_USING_LWIP
	{
		extern void lwip_sys_init(void);
		eth_system_device_init();

		/* register ethernetif device */
		rt_hw_dm9000_init();

		/* re-init device driver */
		rt_device_init_all();

		/* init lwip system */
		lwip_sys_init();
		rt_kprintf("TCP/IP initialized!\n");
	}
#endif

#ifdef RT_USING_FTK
	{
		rt_thread_t ftk_thread;

		int FTK_MAIN(int argc, char* argv[]);

		/* init lcd */
		rt_hw_lcd_init();

		/* init touch panel */
		rtgui_touch_hw_init();	

		/* init keypad */
		rt_hw_key_init();

		/* re-init device driver */
		rt_device_init_all();

		/* create ftk thread */
		ftk_thread = rt_thread_create("ftk",
									FTK_MAIN, RT_NULL,
									10 * 1024, 8, 20);	

		/* startup ftk thread */
		if(ftk_thread != RT_NULL)
			rt_thread_startup(ftk_thread);		
	}
#endif
}
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
#ifdef RT_USING_SPI
    {
        extern void rt_hw_spi0_init(void);
        rt_hw_spi0_init();
    }
#endif
#ifdef RT_USING_I2C
    {
        extern void rt_hw_i2c_init(void);
        rt_i2c_core_init();
        rt_hw_i2c_init();
    }
#endif

    /* Filesystem Initialization */
#ifdef RT_USING_DFS
    {
        /* init the device filesystem */
        dfs_init();

        /* init the elm FAT filesystam*/
        elm_init();

        /* mount sd card fat partition 1 as root directory */
        if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
            rt_kprintf("File System initialized!\n");
        else
            rt_kprintf("File System init failed!\n");
    }
#endif

    /* LwIP Initialization */
#ifdef RT_USING_LWIP
    {
        extern void lwip_sys_init(void);
        extern void lpc17xx_emac_hw_init(void);

        eth_system_device_init();

        /* register ethernetif device */
        lpc_emac_hw_init();
        /* init all device */
        rt_device_init_all();

        /* init lwip system */
        lwip_sys_init();
        rt_kprintf("TCP/IP initialized!\n");
    }
#endif

#ifdef RT_USING_RTGUI
    {
        extern void rtgui_system_server_init(void);
        extern void application_init(void);

        rt_device_t lcd;
         
        /* init lcd */
        rt_hw_lcd_init();
        /* re-init device driver */
        rt_device_init_all();
        /* find lcd device */
        lcd = rt_device_find("lcd");
        if (lcd != RT_NULL)
        {
            /* set lcd device as rtgui graphic driver */
            rtgui_graphic_set_device(lcd);
            /* init rtgui system server */
            rtgui_system_server_init();
            rt_hw_joystick_init();
            rtgui_touch_hw_init("spi20");
            /* startup rtgui in demo of RT-Thread/GUI examples */
            application_init();
        }

    }
#endif

#ifdef RT_USING_FINSH
    /* initialize finsh */
    finsh_system_init();
    finsh_set_device(FINSH_DEVICE_NAME);
#endif
}
Exemple #11
0
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
// #ifdef RT_USING_I2C
//     rt_i2c_core_init();
//     rt_hw_i2c_init();
// #endif

    rt_hw_spi_init();
    rt_system_module_init();
    /* Filesystem Initialization */
#ifdef RT_USING_DFS
    {
        extern rt_err_t mci_hw_init(const char *device_name);
        /* initilize sd card */
        mci_hw_init("sd0");
        /* init the device filesystem */
        dfs_init();

        /* init the elm FAT filesystam*/
        elm_init();
#ifdef RT_USING_NFTL
        {
            extern	void rt_hw_mtd_nand_init(void);
            rt_hw_mtd_nand_init();
            nftl_init();
            nftl_mount();

            // list_mem();
        }
#else
        /* mount sd card fat partition 1 as root directory */
        if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
            rt_kprintf("File System initialized!\n");
        else
            rt_kprintf("File System init failed!\n");
#endif
    }
#endif
    /* LwIP Initialization */
#ifdef RT_USING_LWIP
    {
        extern void lwip_sys_init(void);

        eth_system_device_init();

        /* register ethernetif device */
        lpc_emac_hw_init();
        /* init all device */
        rt_device_init_all();

        /* init lwip system */
        lwip_sys_init();
        rt_kprintf("TCP/IP initialized!\n");
    }
#endif

#ifdef RT_USING_RTGUI
    {
        extern void realtouch_ui_init(void);
        extern void rt_hw_key_init(void);
        rt_device_t lcd;
        /* init lcd */
        rt_hw_lcd_init();
        /* re-init device driver */
        rt_device_init_all();

        /* find lcd device */
        lcd = rt_device_find("lcd");
        if (lcd != RT_NULL)
        {
            /* set lcd device as rtgui graphic driver */
            rtgui_graphic_set_device(lcd);

            /* init rtgui system server */
            rtgui_system_server_init();
            rt_thread_delay(5);
            rt_hw_key_init();
            rtgui_touch_hw_init("spi10");
            /* startup rtgui realtouch ui */
            realtouch_ui_init();

        }
    }
#endif

#ifdef RT_USING_FINSH
    /* initialize finsh */
    finsh_system_init();
    finsh_set_device(FINSH_DEVICE_NAME);
#endif
}
Exemple #12
0
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
    /* Filesystem Initialization */
#ifdef RT_USING_DFS
    {
		extern void ff_convert_init();

		/* init the device filesystem */
		dfs_init();

		/* init the elm FAT filesystam*/
		elm_init();

		/* mount sd card fat partition 1 as SD directory */
		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
			rt_kprintf("SD File System initialized!\n");
		else
			rt_kprintf("SD File System init failed!\n");
      
#ifdef RT_DFS_ELM_USE_LFN
		ff_convert_init();
#endif
    }
#endif
	
    /* load_setup(); */

    /* RTGUI Initialization */
#ifdef RT_USING_RTGUI
    {
        extern void rt_hw_key_init(void);
        extern void remote_init(void);
		extern void rtgui_touch_hw_init(void);

        radio_rtgui_init();
        rt_hw_key_init();
		rtgui_touch_hw_init();
        remote_init();
		brightness_set(radio_setup.lcd_brightness);
		//PCM1770_VolumeSet(radio_setup.default_volume);
    }
#endif
	
    /* start RTC */
    rt_hw_rtc_init();

    /* LwIP Initialization */
#ifdef RT_USING_LWIP
    {
        extern void lwip_sys_init(void);
        extern void rt_hw_dm9000_init(void);

        eth_system_device_init();

        /* register ethernetif device */
        rt_hw_dm9000_init();
        /* init all device */
        rt_device_init_all();
		
        /* init lwip system */
        lwip_sys_init();
        rt_kprintf("TCP/IP initialized!\n");
    }
#endif

#if STM32_EXT_SRAM
    /* init netbuf worker */
    net_buf_init(320 * 1024);
#endif
	
	/* TODO(CXF): start ftp and agent */
	ftpd_start();
}