C++ (Cpp) rtmp_bbp_is_ready Exemples

Exemple #1

Fichier : rtmp_phy.c Projet : Brainiarc7/mtk-wifi-gpl

static INT rtmp_bbp_init(RTMP_ADAPTER *pAd)
{
	INT Index = 0;
	
	/* Read BBP register, make sure BBP is up and running before write new data*/
	if (rtmp_bbp_is_ready(pAd)== FALSE)
		return FALSE;

	Index = 0;

	/* Initialize BBP register to default value*/
	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
	{

#ifdef MICROWAVE_OVEN_SUPPORT
#endif /* MICROWAVE_OVEN_SUPPORT */

		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
				BBPRegTable[Index].Register,
				BBPRegTable[Index].Value);
	}

	/* re-config specific BBP registers for individual chip */
	if (pAd->chipCap.pBBPRegTable)
	{
		REG_PAIR *reg_list = pAd->chipCap.pBBPRegTable;
		
		for (Index = 0; Index < pAd->chipCap.bbpRegTbSize; Index++)
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
					reg_list[Index].Register,
					reg_list[Index].Value);
			DBGPRINT(RT_DEBUG_TRACE, ("BBP_R%d=0x%x\n", 
					reg_list[Index].Register, 
					reg_list[Index].Value));
		}
	}

	if (pAd->chipOps.AsicBbpInit != NULL)
		pAd->chipOps.AsicBbpInit(pAd);

	/*
		For rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
		RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
		3070/71/72,3090,3090A( are included in RT30xx),3572,3390
	*/
	if (((pAd->MACVersion & 0xffff) != 0x0101) &&
		!(IS_RT30xx(pAd)|| IS_RT3572(pAd) || IS_RT5390(pAd) || IS_RT5392(pAd) || IS_RT3290(pAd) || IS_MT7601(pAd) || IS_RT6352(pAd) || IS_MT76x2(pAd)))
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);


	if (pAd->MACVersion == 0x28600100)
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
	}

	return TRUE;
	
}

Exemple #2

Fichier : rtmp_phy.c Projet : andyvand/mt7601u-ap

NDIS_STATUS NICInitBBP(RTMP_ADAPTER *pAd)
{
	INT Index = 0;
	
	/* Read BBP register, make sure BBP is up and running before write new data*/
	if (rtmp_bbp_is_ready(pAd)== FALSE)
		return NDIS_STATUS_FAILURE;

	Index = 0;

	/* Initialize BBP register to default value*/
	for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++)
	{

#ifdef MICROWAVE_OVEN_SUPPORT
#ifdef MT7601
		if (	BBPRegTable[Index].Register == BBP_R65)
		{
			/* Backup BBP_R65 and B5.R6 and B5.R7 */	
			pAd->CommonCfg.MO_Cfg.Stored_BBP_R65 = BBPRegTable[Index].Value;
			DBGPRINT(RT_DEBUG_TRACE, ("Stored_BBP_R65=%x @%s \n", pAd->CommonCfg.MO_Cfg.Stored_BBP_R65, __FUNCTION__));
		}
#endif /* MT7601 */
#endif /* MICROWAVE_OVEN_SUPPORT */

		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
				BBPRegTable[Index].Register,
				BBPRegTable[Index].Value);
	}

	/* re-config specific BBP registers for individual chip */
	if (pAd->chipCap.pBBPRegTable)
	{
		REG_PAIR *pbbpRegTb = pAd->chipCap.pBBPRegTable;
		
		for (Index = 0; Index < pAd->chipCap.bbpRegTbSize; Index++)
		{
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd,
					pbbpRegTb[Index].Register,
					pbbpRegTb[Index].Value);
			DBGPRINT(RT_DEBUG_TRACE, ("BBP_R%d=0x%x\n", 
					pbbpRegTb[Index].Register, 
					pbbpRegTb[Index].Value));
		}
	}

	if (pAd->chipOps.AsicBbpInit != NULL)
		pAd->chipOps.AsicBbpInit(pAd);

	/*
		For rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT.
		RT3090 should not program BBP R84 to 0x19, otherwise TX will block.
		3070/71/72,3090,3090A( are included in RT30xx),3572,3390
	*/
	if (((pAd->MACVersion & 0xffff) != 0x0101) &&
		!(IS_RT30xx(pAd)|| IS_RT3572(pAd) || IS_RT5390(pAd) || IS_RT5392(pAd) || IS_RT3290(pAd) || IS_MT7601(pAd)))
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19);


	if (pAd->MACVersion == 0x28600100)
	{
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
	}

	return NDIS_STATUS_SUCCESS;
	
}