static inline int
setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc)
{
int err = 0;
int fpvalid;
fpvalid = !!used_math();
err |= __put_user(fpvalid, &sc->sc_fpvalid);
if (! fpvalid)
return err;
if (current == last_task_used_math) {
enable_fpu();
save_fpu(current);
disable_fpu();
last_task_used_math = NULL;
regs->sr |= SR_FD;
}
err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.xstate->hardfpu,
(sizeof(long long) * 32) + (sizeof(int) * 1));
clear_used_math();
return err;
}
static int
fix_unaligned(struct thread *td, struct trapframe *frame)
{
#if 0
struct thread *fputhread;
int indicator, reg;
double *fpr;
indicator = EXC_ALI_OPCODE_INDICATOR(frame->dsisr);
switch (indicator) {
case EXC_ALI_LFD:
case EXC_ALI_STFD:
reg = EXC_ALI_RST(frame->dsisr);
fpr = &td->td_pcb->pcb_fpu.fpr[reg];
fputhread = PCPU_GET(fputhread);
/* Juggle the FPU to ensure that we've initialized
* the FPRs, and that their current state is in
* the PCB.
*/
if (fputhread != td) {
if (fputhread)
save_fpu(fputhread);
enable_fpu(td);
}
save_fpu(td);
if (indicator == EXC_ALI_LFD) {
if (copyin((void *)frame->dar, fpr,
sizeof(double)) != 0)
return -1;
enable_fpu(td);
} else {
if (copyout(fpr, (void *)frame->dar,
sizeof(double)) != 0)
return -1;
}
return 0;
break;
}
#endif
return (-1);
}
int exec_thread( unsigned int cpu_id, struct thread *t,
unsigned int milliseconds )
{
assert( t != NULL );
set_fpu_trap();
set_map( t->process->map );
cpu[ cpu_id ].sched.running = 1; // Marked as running before
cpu[ cpu_id ].sched.current_thread = t; // Mark the thread.
release_spinlock( &(cpu[ cpu_id ].sched.lock_scheduler) );
// Other CPU's can register their need to mess with this CPU's tables.
do
{
sysenter_set_esp( t->stack_kernel );
cpu[ cpu_id ].system_tss->esp0 = t->stack_kernel;
cpu[ cpu_id ].system_tss->esp = t->stack;
cpu[ cpu_id ].system_tss->cr3 = (uint32_t)t->process->map;
set_apic_distance( cpu_id, milliseconds );
stats_time( cpu_id, &(cpu[ cpu_id ].st_schedulerTime) ); // Scheduler time.
t->stack = __switch_thread( t->stack );
stats_time_start( &(cpu[ cpu_id ].st_schedulerTime) ); // Scheduler
} while ( cpu[cpu_id].sched.locked == 1 ); // in case...
// If math was used....
if ( t->math_state > 0 ) save_fpu( t );
cpu[ cpu_id ].sched.current_thread = NULL;
cpu[ cpu_id ].sched.running = 0;
// WARNING: Don't use the *t pointer anymore after this.
// Synchronization point occurs here. Table messing.
acquire_spinlock( &(cpu[cpu_id].sched.lock_scheduler) );
return 0;
}
/*===========================================================================*
* do_getmcontext *
*===========================================================================*/
int do_getmcontext(struct proc * caller, message * m_ptr)
{
/* Retrieve machine context of a process */
register struct proc *rp;
int proc_nr, r;
mcontext_t mc;
if (!isokendpt(m_ptr->m_lsys_krn_sys_getmcontext.endpt, &proc_nr))
return(EINVAL);
if (iskerneln(proc_nr)) return(EPERM);
rp = proc_addr(proc_nr);
#if defined(__i386__)
if (!proc_used_fpu(rp))
return(OK); /* No state to copy */
#endif
/* Get the mcontext structure into our address space. */
if ((r = data_copy(m_ptr->m_lsys_krn_sys_getmcontext.endpt,
m_ptr->m_lsys_krn_sys_getmcontext.ctx_ptr, KERNEL,
(vir_bytes) &mc, (phys_bytes) sizeof(mcontext_t))) != OK)
return(r);
mc.mc_flags = 0;
#if defined(__i386__)
/* Copy FPU state */
if (proc_used_fpu(rp)) {
/* make sure that the FPU context is saved into proc structure first */
save_fpu(rp);
mc.mc_flags = (rp->p_misc_flags & MF_FPU_INITIALIZED) ? _MC_FPU_SAVED : 0;
assert(sizeof(mc.__fpregs.__fp_reg_set) == FPU_XFP_SIZE);
memcpy(&(mc.__fpregs.__fp_reg_set), rp->p_seg.fpu_state, FPU_XFP_SIZE);
}
#endif
/* Copy the mcontext structure to the user's address space. */
if ((r = data_copy(KERNEL, (vir_bytes) &mc,
m_ptr->m_lsys_krn_sys_getmcontext.endpt,
m_ptr->m_lsys_krn_sys_getmcontext.ctx_ptr,
(phys_bytes) sizeof(mcontext_t))) != OK)
return(r);
return(OK);
}
/**********************************************************************
* fpe_handler
*
* Handler for SIGFPE.
*/
static void fpe_handler( int signal, siginfo_t *info, ucontext_t *ucontext )
{
EXCEPTION_RECORD rec;
CONTEXT context;
switch ( info->si_code )
{
case FPE_FLTSUB:
rec.ExceptionCode = EXCEPTION_ARRAY_BOUNDS_EXCEEDED;
break;
case FPE_INTDIV:
rec.ExceptionCode = EXCEPTION_INT_DIVIDE_BY_ZERO;
break;
case FPE_INTOVF:
rec.ExceptionCode = EXCEPTION_INT_OVERFLOW;
break;
case FPE_FLTDIV:
rec.ExceptionCode = EXCEPTION_FLT_DIVIDE_BY_ZERO;
break;
case FPE_FLTOVF:
rec.ExceptionCode = EXCEPTION_FLT_OVERFLOW;
break;
case FPE_FLTUND:
rec.ExceptionCode = EXCEPTION_FLT_UNDERFLOW;
break;
case FPE_FLTRES:
rec.ExceptionCode = EXCEPTION_FLT_INEXACT_RESULT;
break;
case FPE_FLTINV:
default:
rec.ExceptionCode = EXCEPTION_FLT_INVALID_OPERATION;
break;
}
save_context( &context, ucontext );
save_fpu( &context, ucontext );
rec.ExceptionFlags = EXCEPTION_CONTINUABLE;
rec.ExceptionRecord = NULL;
rec.ExceptionAddress = (LPVOID)context.pc;
rec.NumberParameters = 0;
__regs_RtlRaiseException( &rec, &context );
restore_context( &context, ucontext );
restore_fpu( &context, ucontext );
}
static inline int setup_sigcontext_fpu(struct pt_regs *regs,
struct sigcontext __user *sc)
{
struct task_struct *tsk = current;
int ret = 0;
__put_user_error(used_math(), &sc->used_math_flag, ret);
if (!used_math())
return ret;
preempt_disable();
#if IS_ENABLED(CONFIG_LAZY_FPU)
if (last_task_used_math == tsk)
save_fpu(last_task_used_math);
#else
unlazy_fpu(tsk);
#endif
ret = __copy_to_user(&sc->fpu, &tsk->thread.fpu,
sizeof(struct fpu_struct));
preempt_enable();
return ret;
}
void cpu_save(QEMUFile *f, void *opaque)
{
CPUMIPSState *env = opaque;
int i;
/* Save active TC */
save_tc(f, &env->active_tc);
/* Save active FPU */
save_fpu(f, &env->active_fpu);
/* Save MVP */
qemu_put_sbe32s(f, &env->mvp->CP0_MVPControl);
qemu_put_sbe32s(f, &env->mvp->CP0_MVPConf0);
qemu_put_sbe32s(f, &env->mvp->CP0_MVPConf1);
/* Save TLB */
qemu_put_be32s(f, &env->tlb->nb_tlb);
for(i = 0; i < MIPS_TLB_MAX; i++) {
uint16_t flags = ((env->tlb->mmu.r4k.tlb[i].G << 10) |
(env->tlb->mmu.r4k.tlb[i].C0 << 7) |
(env->tlb->mmu.r4k.tlb[i].C1 << 4) |
(env->tlb->mmu.r4k.tlb[i].V0 << 3) |
(env->tlb->mmu.r4k.tlb[i].V1 << 2) |
(env->tlb->mmu.r4k.tlb[i].D0 << 1) |
(env->tlb->mmu.r4k.tlb[i].D1 << 0));
uint8_t asid;
qemu_put_betls(f, &env->tlb->mmu.r4k.tlb[i].VPN);
qemu_put_be32s(f, &env->tlb->mmu.r4k.tlb[i].PageMask);
asid = env->tlb->mmu.r4k.tlb[i].ASID;
qemu_put_8s(f, &asid);
qemu_put_be16s(f, &flags);
qemu_put_betls(f, &env->tlb->mmu.r4k.tlb[i].PFN[0]);
qemu_put_betls(f, &env->tlb->mmu.r4k.tlb[i].PFN[1]);
}
/* Save CPU metastate */
qemu_put_be32s(f, &env->current_tc);
qemu_put_be32s(f, &env->current_fpu);
qemu_put_sbe32s(f, &env->error_code);
qemu_put_be32s(f, &env->hflags);
qemu_put_betls(f, &env->btarget);
i = env->bcond;
qemu_put_sbe32s(f, &i);
/* Save remaining CP1 registers */
qemu_put_sbe32s(f, &env->CP0_Index);
qemu_put_sbe32s(f, &env->CP0_Random);
qemu_put_sbe32s(f, &env->CP0_VPEControl);
qemu_put_sbe32s(f, &env->CP0_VPEConf0);
qemu_put_sbe32s(f, &env->CP0_VPEConf1);
qemu_put_betls(f, &env->CP0_YQMask);
qemu_put_betls(f, &env->CP0_VPESchedule);
qemu_put_betls(f, &env->CP0_VPEScheFBack);
qemu_put_sbe32s(f, &env->CP0_VPEOpt);
qemu_put_betls(f, &env->CP0_EntryLo0);
qemu_put_betls(f, &env->CP0_EntryLo1);
qemu_put_betls(f, &env->CP0_Context);
qemu_put_sbe32s(f, &env->CP0_PageMask);
qemu_put_sbe32s(f, &env->CP0_PageGrain);
qemu_put_sbe32s(f, &env->CP0_Wired);
qemu_put_sbe32s(f, &env->CP0_SRSConf0);
qemu_put_sbe32s(f, &env->CP0_SRSConf1);
qemu_put_sbe32s(f, &env->CP0_SRSConf2);
qemu_put_sbe32s(f, &env->CP0_SRSConf3);
qemu_put_sbe32s(f, &env->CP0_SRSConf4);
qemu_put_sbe32s(f, &env->CP0_HWREna);
qemu_put_betls(f, &env->CP0_BadVAddr);
qemu_put_sbe32s(f, &env->CP0_Count);
qemu_put_betls(f, &env->CP0_EntryHi);
qemu_put_sbe32s(f, &env->CP0_Compare);
qemu_put_sbe32s(f, &env->CP0_Status);
qemu_put_sbe32s(f, &env->CP0_IntCtl);
qemu_put_sbe32s(f, &env->CP0_SRSCtl);
qemu_put_sbe32s(f, &env->CP0_SRSMap);
qemu_put_sbe32s(f, &env->CP0_Cause);
qemu_put_betls(f, &env->CP0_EPC);
qemu_put_sbe32s(f, &env->CP0_PRid);
qemu_put_sbe32s(f, &env->CP0_EBase);
qemu_put_sbe32s(f, &env->CP0_Config0);
qemu_put_sbe32s(f, &env->CP0_Config1);
qemu_put_sbe32s(f, &env->CP0_Config2);
qemu_put_sbe32s(f, &env->CP0_Config3);
qemu_put_sbe32s(f, &env->CP0_Config6);
qemu_put_sbe32s(f, &env->CP0_Config7);
qemu_put_betls(f, &env->lladdr);
for(i = 0; i < 8; i++)
qemu_put_betls(f, &env->CP0_WatchLo[i]);
for(i = 0; i < 8; i++)
qemu_put_sbe32s(f, &env->CP0_WatchHi[i]);
qemu_put_betls(f, &env->CP0_XContext);
qemu_put_sbe32s(f, &env->CP0_Framemask);
qemu_put_sbe32s(f, &env->CP0_Debug);
qemu_put_betls(f, &env->CP0_DEPC);
qemu_put_sbe32s(f, &env->CP0_Performance0);
qemu_put_sbe32s(f, &env->CP0_TagLo);
qemu_put_sbe32s(f, &env->CP0_DataLo);
qemu_put_sbe32s(f, &env->CP0_TagHi);
qemu_put_sbe32s(f, &env->CP0_DataHi);
qemu_put_betls(f, &env->CP0_ErrorEPC);
qemu_put_sbe32s(f, &env->CP0_DESAVE);
/* Save inactive TC state */
for (i = 0; i < MIPS_SHADOW_SET_MAX; i++)
save_tc(f, &env->tcs[i]);
for (i = 0; i < MIPS_FPU_MAX; i++)
save_fpu(f, &env->fpus[i]);
}
/*===========================================================================*
* do_fork *
*===========================================================================*/
int do_fork(struct proc * caller, message * m_ptr)
{
/* Handle sys_fork().
* m_lsys_krn_sys_fork.endpt has forked.
* The child is m_lsys_krn_sys_fork.slot.
*/
#if defined(__i386__)
char *old_fpu_save_area_p;
#endif
register struct proc *rpc; /* child process pointer */
struct proc *rpp; /* parent process pointer */
int gen;
int p_proc;
int namelen;
if(!isokendpt(m_ptr->m_lsys_krn_sys_fork.endpt, &p_proc))
return EINVAL;
rpp = proc_addr(p_proc);
rpc = proc_addr(m_ptr->m_lsys_krn_sys_fork.slot);
if (isemptyp(rpp) || ! isemptyp(rpc)) return(EINVAL);
assert(!(rpp->p_misc_flags & MF_DELIVERMSG));
/* needs to be receiving so we know where the message buffer is */
if(!RTS_ISSET(rpp, RTS_RECEIVING)) {
printf("kernel: fork not done synchronously?\n");
return EINVAL;
}
/* make sure that the FPU context is saved in parent before copy */
save_fpu(rpp);
/* Copy parent 'proc' struct to child. And reinitialize some fields. */
gen = _ENDPOINT_G(rpc->p_endpoint);
#if defined(__i386__)
old_fpu_save_area_p = rpc->p_seg.fpu_state;
#endif
*rpc = *rpp; /* copy 'proc' struct */
#if defined(__i386__)
rpc->p_seg.fpu_state = old_fpu_save_area_p;
if(proc_used_fpu(rpp))
memcpy(rpc->p_seg.fpu_state, rpp->p_seg.fpu_state, FPU_XFP_SIZE);
#endif
if(++gen >= _ENDPOINT_MAX_GENERATION) /* increase generation */
gen = 1; /* generation number wraparound */
rpc->p_nr = m_ptr->m_lsys_krn_sys_fork.slot; /* this was obliterated by copy */
rpc->p_endpoint = _ENDPOINT(gen, rpc->p_nr); /* new endpoint of slot */
rpc->p_reg.retreg = 0; /* child sees pid = 0 to know it is child */
rpc->p_user_time = 0; /* set all the accounting times to 0 */
rpc->p_sys_time = 0;
rpc->p_misc_flags &=
~(MF_VIRT_TIMER | MF_PROF_TIMER | MF_SC_TRACE | MF_SPROF_SEEN | MF_STEP);
rpc->p_virt_left = 0; /* disable, clear the process-virtual timers */
rpc->p_prof_left = 0;
/* Mark process name as being a forked copy */
namelen = strlen(rpc->p_name);
#define FORKSTR "*F"
if(namelen+strlen(FORKSTR) < sizeof(rpc->p_name))
strcat(rpc->p_name, FORKSTR);
/* the child process is not runnable until it's scheduled. */
RTS_SET(rpc, RTS_NO_QUANTUM);
reset_proc_accounting(rpc);
rpc->p_cpu_time_left = 0;
rpc->p_cycles = 0;
rpc->p_kcall_cycles = 0;
rpc->p_kipc_cycles = 0;
rpc->p_signal_received = 0;
/* If the parent is a privileged process, take away the privileges from the
* child process and inhibit it from running by setting the NO_PRIV flag.
* The caller should explicitly set the new privileges before executing.
*/
if (priv(rpp)->s_flags & SYS_PROC) {
rpc->p_priv = priv_addr(USER_PRIV_ID);
rpc->p_rts_flags |= RTS_NO_PRIV;
}
/* Calculate endpoint identifier, so caller knows what it is. */
m_ptr->m_krn_lsys_sys_fork.endpt = rpc->p_endpoint;
m_ptr->m_krn_lsys_sys_fork.msgaddr = rpp->p_delivermsg_vir;
/* Don't schedule process in VM mode until it has a new pagetable. */
if(m_ptr->m_lsys_krn_sys_fork.flags & PFF_VMINHIBIT) {
RTS_SET(rpc, RTS_VMINHIBIT);
}
/*
* Only one in group should have RTS_SIGNALED, child doesn't inherit tracing.
*/
RTS_UNSET(rpc, (RTS_SIGNALED | RTS_SIG_PENDING | RTS_P_STOP));
(void) sigemptyset(&rpc->p_pending);
#if defined(__i386__)
rpc->p_seg.p_cr3 = 0;
rpc->p_seg.p_cr3_v = NULL;
#elif defined(__arm__)
rpc->p_seg.p_ttbr = 0;
rpc->p_seg.p_ttbr_v = NULL;
#endif
return OK;
}
void
trap(struct trapframe *frame)
{
struct thread *td;
struct proc *p;
#ifdef KDTRACE_HOOKS
uint32_t inst;
#endif
int sig, type, user;
u_int ucode;
ksiginfo_t ksi;
PCPU_INC(cnt.v_trap);
td = curthread;
p = td->td_proc;
type = ucode = frame->exc;
sig = 0;
user = frame->srr1 & PSL_PR;
CTR3(KTR_TRAP, "trap: %s type=%s (%s)", td->td_name,
trapname(type), user ? "user" : "kernel");
#ifdef KDTRACE_HOOKS
/*
* A trap can occur while DTrace executes a probe. Before
* executing the probe, DTrace blocks re-scheduling and sets
* a flag in its per-cpu flags to indicate that it doesn't
* want to fault. On returning from the probe, the no-fault
* flag is cleared and finally re-scheduling is enabled.
*
* If the DTrace kernel module has registered a trap handler,
* call it and if it returns non-zero, assume that it has
* handled the trap and modified the trap frame so that this
* function can return normally.
*/
if (dtrace_trap_func != NULL && (*dtrace_trap_func)(frame, type) != 0)
return;
#endif
if (user) {
td->td_pticks = 0;
td->td_frame = frame;
if (td->td_cowgen != p->p_cowgen)
thread_cow_update(td);
/* User Mode Traps */
switch (type) {
case EXC_RUNMODETRC:
case EXC_TRC:
frame->srr1 &= ~PSL_SE;
sig = SIGTRAP;
ucode = TRAP_TRACE;
break;
#ifdef __powerpc64__
case EXC_ISE:
case EXC_DSE:
if (handle_user_slb_spill(&p->p_vmspace->vm_pmap,
(type == EXC_ISE) ? frame->srr0 : frame->dar) != 0){
sig = SIGSEGV;
ucode = SEGV_MAPERR;
}
break;
#endif
case EXC_DSI:
case EXC_ISI:
sig = trap_pfault(frame, 1);
if (sig == SIGSEGV)
ucode = SEGV_MAPERR;
break;
case EXC_SC:
syscall(frame);
break;
case EXC_FPU:
KASSERT((td->td_pcb->pcb_flags & PCB_FPU) != PCB_FPU,
("FPU already enabled for thread"));
enable_fpu(td);
break;
case EXC_VEC:
KASSERT((td->td_pcb->pcb_flags & PCB_VEC) != PCB_VEC,
("Altivec already enabled for thread"));
enable_vec(td);
break;
case EXC_VSX:
KASSERT((td->td_pcb->pcb_flags & PCB_VSX) != PCB_VSX,
("VSX already enabled for thread"));
if (!(td->td_pcb->pcb_flags & PCB_VEC))
enable_vec(td);
if (!(td->td_pcb->pcb_flags & PCB_FPU))
save_fpu(td);
td->td_pcb->pcb_flags |= PCB_VSX;
enable_fpu(td);
break;
case EXC_VECAST_G4:
case EXC_VECAST_G5:
/*
* We get a VPU assist exception for IEEE mode
* vector operations on denormalized floats.
* Emulating this is a giant pain, so for now,
* just switch off IEEE mode and treat them as
* zero.
*/
save_vec(td);
td->td_pcb->pcb_vec.vscr |= ALTIVEC_VSCR_NJ;
enable_vec(td);
break;
case EXC_ALI:
if (fix_unaligned(td, frame) != 0) {
sig = SIGBUS;
ucode = BUS_ADRALN;
}
else
frame->srr0 += 4;
break;
case EXC_DEBUG: /* Single stepping */
mtspr(SPR_DBSR, mfspr(SPR_DBSR));
frame->srr1 &= ~PSL_DE;
frame->cpu.booke.dbcr0 &= ~(DBCR0_IDM || DBCR0_IC);
sig = SIGTRAP;
ucode = TRAP_TRACE;
break;
case EXC_PGM:
/* Identify the trap reason */
#ifdef AIM
if (frame->srr1 & EXC_PGM_TRAP) {
#else
if (frame->cpu.booke.esr & ESR_PTR) {
#endif
#ifdef KDTRACE_HOOKS
inst = fuword32((const void *)frame->srr0);
if (inst == 0x0FFFDDDD &&
dtrace_pid_probe_ptr != NULL) {
struct reg regs;
fill_regs(td, ®s);
(*dtrace_pid_probe_ptr)(®s);
break;
}
#endif
sig = SIGTRAP;
ucode = TRAP_BRKPT;
} else {
sig = ppc_instr_emulate(frame, td->td_pcb);
if (sig == SIGILL) {
if (frame->srr1 & EXC_PGM_PRIV)
ucode = ILL_PRVOPC;
else if (frame->srr1 & EXC_PGM_ILLEGAL)
ucode = ILL_ILLOPC;
} else if (sig == SIGFPE)
ucode = FPE_FLTINV; /* Punt for now, invalid operation. */
}
break;
case EXC_MCHK:
/*
* Note that this may not be recoverable for the user
* process, depending on the type of machine check,
* but it at least prevents the kernel from dying.
*/
sig = SIGBUS;
ucode = BUS_OBJERR;
break;
default:
trap_fatal(frame);
}
} else {
/* Kernel Mode Traps */
KASSERT(cold || td->td_ucred != NULL,
("kernel trap doesn't have ucred"));
switch (type) {
#ifdef KDTRACE_HOOKS
case EXC_PGM:
if (frame->srr1 & EXC_PGM_TRAP) {
if (*(uint32_t *)frame->srr0 == EXC_DTRACE) {
if (dtrace_invop_jump_addr != NULL) {
dtrace_invop_jump_addr(frame);
return;
}
}
}
break;
#endif
#ifdef __powerpc64__
case EXC_DSE:
if ((frame->dar & SEGMENT_MASK) == USER_ADDR) {
__asm __volatile ("slbmte %0, %1" ::
"r"(td->td_pcb->pcb_cpu.aim.usr_vsid),
"r"(USER_SLB_SLBE));
return;
}
break;
#endif
case EXC_DSI:
if (trap_pfault(frame, 0) == 0)
return;
break;
case EXC_MCHK:
if (handle_onfault(frame))
return;
break;
default:
break;
}
trap_fatal(frame);
}
/*
* Finish a fork operation, with process p2 nearly set up.
*/
void
cpu_fork(struct proc *p1, struct proc *p2, void *stack, size_t stacksize,
void (*func)(void *), void *arg)
{
struct trapframe *tf;
struct callframe *cf;
struct switchframe *sf;
caddr_t stktop1, stktop2;
extern void fork_trampoline(void);
struct pcb *pcb = &p2->p_addr->u_pcb;
struct cpu_info *ci = curcpu();
if (p1 == ci->ci_fpuproc)
save_fpu();
*pcb = p1->p_addr->u_pcb;
#ifdef ALTIVEC
if (p1->p_addr->u_pcb.pcb_vr != NULL) {
if (p1 == ci->ci_vecproc)
save_vec(p1);
pcb->pcb_vr = pool_get(&ppc_vecpl, PR_WAITOK);
*pcb->pcb_vr = *p1->p_addr->u_pcb.pcb_vr;
} else
pcb->pcb_vr = NULL;
#endif /* ALTIVEC */
pcb->pcb_pm = p2->p_vmspace->vm_map.pmap;
pmap_extract(pmap_kernel(),
(vaddr_t)pcb->pcb_pm, (paddr_t *)&pcb->pcb_pmreal);
/*
* Setup the trap frame for the new process
*/
stktop1 = (caddr_t)trapframe(p1);
stktop2 = (caddr_t)trapframe(p2);
bcopy(stktop1, stktop2, sizeof(struct trapframe));
/*
* If specified, give the child a different stack.
*/
if (stack != NULL) {
tf = trapframe(p2);
tf->fixreg[1] = (register_t)stack + stacksize;
}
stktop2 = (caddr_t)((u_long)stktop2 & ~15); /* Align stack pointer */
/*
* There happens to be a callframe, too.
*/
cf = (struct callframe *)stktop2;
cf->lr = (int)fork_trampoline;
/*
* Below the trap frame, there is another call frame:
*/
stktop2 -= 16;
cf = (struct callframe *)stktop2;
cf->r31 = (register_t)func;
cf->r30 = (register_t)arg;
/*
* Below that, we allocate the switch frame:
*/
/* must match SFRAMELEN in genassym */
stktop2 -= roundup(sizeof *sf, 16);
sf = (struct switchframe *)stktop2;
bzero((void *)sf, sizeof *sf); /* just in case */
sf->sp = (int)cf;
sf->user_sr = pmap_kernel()->pm_sr[PPC_USER_SR]; /* just in case */
pcb->pcb_sp = (int)stktop2;
}
/*===========================================================================*
* do_sigsend *
*===========================================================================*/
int do_sigsend(struct proc * caller, message * m_ptr)
{
/* Handle sys_sigsend, POSIX-style signal handling. */
struct sigmsg smsg;
register struct proc *rp;
struct sigcontext sc, *scp;
struct sigframe fr, *frp;
int proc_nr, r;
if (!isokendpt(m_ptr->SIG_ENDPT, &proc_nr)) return(EINVAL);
if (iskerneln(proc_nr)) return(EPERM);
rp = proc_addr(proc_nr);
/* Get the sigmsg structure into our address space. */
if((r=data_copy_vmcheck(caller, caller->p_endpoint,
(vir_bytes) m_ptr->SIG_CTXT_PTR, KERNEL, (vir_bytes) &smsg,
(phys_bytes) sizeof(struct sigmsg))) != OK)
return r;
/* Compute the user stack pointer where sigcontext will be stored. */
smsg.sm_stkptr = arch_get_sp(rp);
scp = (struct sigcontext *) smsg.sm_stkptr - 1;
/* Copy the registers to the sigcontext structure. */
memcpy(&sc.sc_regs, (char *) &rp->p_reg, sizeof(sigregs));
#if defined(__i386__)
sc.trap_style = rp->p_seg.p_kern_trap_style;
if(sc.trap_style == KTS_NONE) {
printf("do_sigsend: sigsend an unsaved process\n");
return EINVAL;
}
if(proc_used_fpu(rp)) {
/* save the FPU context before saving it to the sig context */
save_fpu(rp);
memcpy(&sc.sc_fpu_state, rp->p_seg.fpu_state, FPU_XFP_SIZE);
}
#endif
/* Finish the sigcontext initialization. */
sc.sc_mask = smsg.sm_mask;
sc.sc_flags = rp->p_misc_flags & MF_FPU_INITIALIZED;
/* Copy the sigcontext structure to the user's stack. */
if((r=data_copy_vmcheck(caller, KERNEL, (vir_bytes) &sc, m_ptr->SIG_ENDPT,
(vir_bytes) scp, (vir_bytes) sizeof(struct sigcontext))) != OK)
return r;
/* Initialize the sigframe structure. */
frp = (struct sigframe *) scp - 1;
fr.sf_scpcopy = scp;
fr.sf_retadr2= (void (*)()) rp->p_reg.pc;
fr.sf_fp = rp->p_reg.fp;
rp->p_reg.fp = (reg_t) &frp->sf_fp;
fr.sf_scp = scp;
fpu_sigcontext(rp, &fr, &sc);
fr.sf_signo = smsg.sm_signo;
fr.sf_retadr = (void (*)()) smsg.sm_sigreturn;
#if defined(__arm__)
/* use the ARM link register to set the return address from the signal
* handler
*/
rp->p_reg.lr = (reg_t) fr.sf_retadr;
if(rp->p_reg.lr & 1) { printf("sigsend: LSB LR makes no sense.\n"); }
/* pass signal handler parameters in registers */
rp->p_reg.retreg = (reg_t) fr.sf_signo;
rp->p_reg.r1 = (reg_t) fr.sf_code;
rp->p_reg.r2 = (reg_t) fr.sf_scp;
rp->p_misc_flags |= MF_CONTEXT_SET;
#endif
/* Copy the sigframe structure to the user's stack. */
if((r=data_copy_vmcheck(caller, KERNEL, (vir_bytes) &fr,
m_ptr->SIG_ENDPT, (vir_bytes) frp,
(vir_bytes) sizeof(struct sigframe))) != OK)
return r;
/* Reset user registers to execute the signal handler. */
rp->p_reg.sp = (reg_t) frp;
rp->p_reg.pc = (reg_t) smsg.sm_sighandler;
/* Signal handler should get clean FPU. */
rp->p_misc_flags &= ~MF_FPU_INITIALIZED;
if(!RTS_ISSET(rp, RTS_PROC_STOP)) {
printf("system: warning: sigsend a running process\n");
printf("caller stack: ");
proc_stacktrace(caller);
}
return(OK);
}
/* Task Switch occurs here */
Registers_t *_ThreadingSwitch(Registers_t *Regs, int PreEmptive, uint32_t *TimeSlice,
uint32_t *TaskPriority)
{
/* We'll need these */
Cpu_t Cpu;
MCoreThread_t *mThread;
x86Thread_t *tx86;
/* Sanity */
if (ThreadingIsEnabled() != 1)
return Regs;
/* Get CPU */
Cpu = ApicGetCpu();
/* Get thread */
mThread = ThreadingGetCurrentThread(Cpu);
/* What the f**k?? */
assert(mThread != NULL && Regs != NULL);
/* Cast */
tx86 = (x86Thread_t*)mThread->ThreadData;
/* Save FPU/MMX/SSE State */
if (tx86->Flags & X86_THREAD_USEDFPU)
save_fpu(tx86->FpuBuffer);
/* Save stack */
if (mThread->Flags & THREADING_USERMODE)
tx86->UserContext = Regs;
else
tx86->Context = Regs;
/* Switch */
mThread = ThreadingSwitch(Cpu, mThread, (uint8_t)PreEmptive);
tx86 = (x86Thread_t*)mThread->ThreadData;
/* Update user variables */
*TimeSlice = mThread->TimeSlice;
*TaskPriority = mThread->Priority;
/* Update Addressing Space */
MmVirtualSwitchPageDirectory(Cpu,
(PageDirectory_t*)mThread->AddrSpace->PageDirectory, mThread->AddrSpace->Cr3);
/* Set TSS */
TssUpdateStack(Cpu, (Addr_t)tx86->Context);
/* Finish Transition */
if (mThread->Flags & THREADING_TRANSITION)
{
mThread->Flags &= ~THREADING_TRANSITION;
mThread->Flags |= THREADING_USERMODE;
}
/* Clear FPU/MMX/SSE */
tx86->Flags &= ~X86_THREAD_USEDFPU;
/* Set TS bit in CR0 */
set_ts();
/* Return new stack */
if (mThread->Flags & THREADING_USERMODE)
return tx86->UserContext;
else
return tx86->Context;
}
/*===========================================================================*
* do_sigsend *
*===========================================================================*/
PUBLIC int do_sigsend(struct proc * caller, message * m_ptr)
{
/* Handle sys_sigsend, POSIX-style signal handling. */
struct sigmsg smsg;
register struct proc *rp;
struct sigcontext sc, *scp;
struct sigframe fr, *frp;
int proc_nr, r;
if (!isokendpt(m_ptr->SIG_ENDPT, &proc_nr)) return(EINVAL);
if (iskerneln(proc_nr)) return(EPERM);
rp = proc_addr(proc_nr);
/* Get the sigmsg structure into our address space. */
if((r=data_copy_vmcheck(caller, caller->p_endpoint,
(vir_bytes) m_ptr->SIG_CTXT_PTR, KERNEL, (vir_bytes) &smsg,
(phys_bytes) sizeof(struct sigmsg))) != OK)
return r;
/* Compute the user stack pointer where sigcontext will be stored. */
scp = (struct sigcontext *) smsg.sm_stkptr - 1;
/* Copy the registers to the sigcontext structure. */
memcpy(&sc.sc_regs, (char *) &rp->p_reg, sizeof(sigregs));
#if (_MINIX_CHIP == _CHIP_INTEL)
if(proc_used_fpu(rp)) {
/* save the FPU context before saving it to the sig context */
save_fpu(rp);
memcpy(&sc.sc_fpu_state, rp->p_fpu_state.fpu_save_area_p,
FPU_XFP_SIZE);
}
#endif
/* Finish the sigcontext initialization. */
sc.sc_mask = smsg.sm_mask;
sc.sc_flags = rp->p_misc_flags & MF_FPU_INITIALIZED;
/* Copy the sigcontext structure to the user's stack. */
if((r=data_copy_vmcheck(caller, KERNEL, (vir_bytes) &sc, m_ptr->SIG_ENDPT,
(vir_bytes) scp, (vir_bytes) sizeof(struct sigcontext))) != OK)
return r;
/* Initialize the sigframe structure. */
frp = (struct sigframe *) scp - 1;
fr.sf_scpcopy = scp;
fr.sf_retadr2= (void (*)()) rp->p_reg.pc;
fr.sf_fp = rp->p_reg.fp;
rp->p_reg.fp = (reg_t) &frp->sf_fp;
fr.sf_scp = scp;
fpu_sigcontext(rp, &fr, &sc);
fr.sf_signo = smsg.sm_signo;
fr.sf_retadr = (void (*)()) smsg.sm_sigreturn;
/* Copy the sigframe structure to the user's stack. */
if((r=data_copy_vmcheck(caller, KERNEL, (vir_bytes) &fr,
m_ptr->SIG_ENDPT, (vir_bytes) frp,
(vir_bytes) sizeof(struct sigframe))) != OK)
return r;
/* Reset user registers to execute the signal handler. */
rp->p_reg.sp = (reg_t) frp;
rp->p_reg.pc = (reg_t) smsg.sm_sighandler;
/* Signal handler should get clean FPU. */
rp->p_misc_flags &= ~MF_FPU_INITIALIZED;
if(!RTS_ISSET(rp, RTS_PROC_STOP)) {
printf("system: warning: sigsend a running process\n");
printf("caller stack: ");
proc_stacktrace(caller);
}
return(OK);
}
