void
emc_mpath_status(struct scsi_link *link)
{
struct emc_softc *sc = link->device_softc;
scsi_xsh_add(&sc->sc_xsh);
}
/*
* Actually translate the requested transfer into one the physical driver
* can understand. The transfer is described by a buf and will include
* only one physical transfer.
*/
void
sdstrategy(struct buf *bp)
{
struct sd_softc *sc;
int s;
sc = sdlookup(DISKUNIT(bp->b_dev));
if (sc == NULL) {
bp->b_error = ENXIO;
goto bad;
}
if (sc->flags & SDF_DYING) {
bp->b_error = ENXIO;
goto bad;
}
SC_DEBUG(sc->sc_link, SDEV_DB2, ("sdstrategy: %ld bytes @ blk %lld\n",
bp->b_bcount, (long long)bp->b_blkno));
/*
* If the device has been made invalid, error out
*/
if ((sc->sc_link->flags & SDEV_MEDIA_LOADED) == 0) {
if (sc->sc_link->flags & SDEV_OPEN)
bp->b_error = EIO;
else
bp->b_error = ENODEV;
goto bad;
}
/* Validate the request. */
if (bounds_check_with_label(bp, sc->sc_dk.dk_label) == -1)
goto done;
/* Place it in the queue of disk activities for this disk. */
bufq_queue(&sc->sc_bufq, bp);
/*
* Tell the device to get going on the transfer if it's
* not doing anything, otherwise just wait for completion
*/
scsi_xsh_add(&sc->sc_xsh);
device_unref(&sc->sc_dev);
return;
bad:
bp->b_flags |= B_ERROR;
bp->b_resid = bp->b_bcount;
done:
s = splbio();
biodone(bp);
splx(s);
if (sc != NULL)
device_unref(&sc->sc_dev);
}
/*
* sdstart looks to see if there is a buf waiting for the device
* and that the device is not already busy. If both are true,
* It dequeues the buf and creates a scsi command to perform the
* transfer in the buf. The transfer request will call scsi_done
* on completion, which will in turn call this routine again
* so that the next queued transfer is performed.
* The bufs are queued by the strategy routine (sdstrategy)
*
* This routine is also called after other non-queued requests
* have been made of the scsi driver, to ensure that the queue
* continues to be drained.
*/
void
sdstart(struct scsi_xfer *xs)
{
struct scsi_link *link = xs->sc_link;
struct sd_softc *sc = link->device_softc;
struct buf *bp;
u_int64_t secno;
int nsecs;
int read;
struct partition *p;
if (sc->flags & SDF_DYING) {
scsi_xs_put(xs);
return;
}
if ((link->flags & SDEV_MEDIA_LOADED) == 0) {
bufq_drain(&sc->sc_bufq);
scsi_xs_put(xs);
return;
}
bp = bufq_dequeue(&sc->sc_bufq);
if (bp == NULL) {
scsi_xs_put(xs);
return;
}
secno = DL_BLKTOSEC(sc->sc_dk.dk_label, bp->b_blkno);
p = &sc->sc_dk.dk_label->d_partitions[DISKPART(bp->b_dev)];
secno += DL_GETPOFFSET(p);
nsecs = howmany(bp->b_bcount, sc->sc_dk.dk_label->d_secsize);
read = bp->b_flags & B_READ;
/*
* Fill out the scsi command. If the transfer will
* fit in a "small" cdb, use it.
*/
if (!(link->flags & SDEV_ATAPI) &&
!(link->quirks & SDEV_ONLYBIG) &&
((secno & 0x1fffff) == secno) &&
((nsecs & 0xff) == nsecs))
sd_cmd_rw6(xs, read, secno, nsecs);
else if (((secno & 0xffffffff) == secno) &&
((nsecs & 0xffff) == nsecs))
sd_cmd_rw10(xs, read, secno, nsecs);
else if (((secno & 0xffffffff) == secno) &&
((nsecs & 0xffffffff) == nsecs))
sd_cmd_rw12(xs, read, secno, nsecs);
else
sd_cmd_rw16(xs, read, secno, nsecs);
xs->flags |= (read ? SCSI_DATA_IN : SCSI_DATA_OUT);
xs->timeout = 60000;
xs->data = bp->b_data;
xs->datalen = bp->b_bcount;
xs->done = sd_buf_done;
xs->cookie = bp;
xs->bp = bp;
/* Instrumentation. */
disk_busy(&sc->sc_dk);
/* Mark disk as dirty. */
if (!read)
sc->flags |= SDF_DIRTY;
scsi_xs_exec(xs);
/* move onto the next io */
if (ISSET(sc->flags, SDF_WAITING))
CLR(sc->flags, SDF_WAITING);
else if (bufq_peek(&sc->sc_bufq))
scsi_xsh_add(&sc->sc_xsh);
}
