static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
might_sleep();
if (!key || !key->local->ops->set_key)
return;
assert_key_lock(key->local);
if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
return;
sta = key->sta;
sdata = key->sdata;
if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
(key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
increment_tailroom_need_count(sdata);
ret = drv_set_key(key->local, DISABLE_KEY, sdata,
sta ? &sta->sta : NULL, &key->conf);
if (ret)
sdata_err(sdata,
"failed to remove key (%d, %pM) from hardware (%d)\n",
key->conf.keyidx,
sta ? sta->sta.addr : bcast_addr, ret);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
}
void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir;
char buf[10 + IFNAMSIZ];
dir = sdata->vif.debugfs_dir;
if (!dir)
return;
sprintf(buf, "netdev:%s", sdata->name);
if (!debugfs_rename(dir->d_parent, dir, dir->d_parent, buf))
sdata_err(sdata,
"debugfs: failed to rename debugfs dir to %s\n",
buf);
}
static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
might_sleep();
if (key->flags & KEY_FLAG_TAINTED)
return -EINVAL;
if (!key->local->ops->set_key)
goto out_unsupported;
assert_key_lock(key->local);
sta = key->sta;
/*
* If this is a per-STA GTK, check if it
* is supported; if not, return.
*/
if (sta && !(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE) &&
!(key->local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK))
goto out_unsupported;
if (sta && !sta->uploaded)
goto out_unsupported;
sdata = key->sdata;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
/*
* The driver doesn't know anything about VLAN interfaces.
* Hence, don't send GTKs for VLAN interfaces to the driver.
*/
if (!(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE))
goto out_unsupported;
}
ret = drv_set_key(key->local, SET_KEY, sdata,
sta ? &sta->sta : NULL, &key->conf);
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
(key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
sdata->crypto_tx_tailroom_needed_cnt--;
WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV));
return 0;
}
if (ret != -ENOSPC && ret != -EOPNOTSUPP)
sdata_err(sdata,
"failed to set key (%d, %pM) to hardware (%d)\n",
key->conf.keyidx,
sta ? sta->sta.addr : bcast_addr, ret);
out_unsupported:
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
case WLAN_CIPHER_SUITE_TKIP:
case WLAN_CIPHER_SUITE_CCMP:
case WLAN_CIPHER_SUITE_AES_CMAC:
/* all of these we can do in software */
return 0;
default:
return -EINVAL;
}
}
static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret = -EOPNOTSUPP;
might_sleep();
if (key->flags & KEY_FLAG_TAINTED) {
/* If we get here, it's during resume and the key is
* tainted so shouldn't be used/programmed any more.
* However, its flags may still indicate that it was
* programmed into the device (since we're in resume)
* so clear that flag now to avoid trying to remove
* it again later.
*/
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
return -EINVAL;
}
if (!key->local->ops->set_key)
goto out_unsupported;
assert_key_lock(key->local);
sta = key->sta;
/*
* If this is a per-STA GTK, check if it
* is supported; if not, return.
*/
if (sta && !(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE) &&
!(key->local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK))
goto out_unsupported;
if (sta && !sta->uploaded)
goto out_unsupported;
sdata = key->sdata;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
/*
* The driver doesn't know anything about VLAN interfaces.
* Hence, don't send GTKs for VLAN interfaces to the driver.
*/
if (!(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE))
goto out_unsupported;
}
ret = drv_set_key(key->local, SET_KEY, sdata,
sta ? &sta->sta : NULL, &key->conf);
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
(key->conf.flags & IEEE80211_KEY_FLAG_RESERVE_TAILROOM)))
sdata->crypto_tx_tailroom_needed_cnt--;
WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV));
return 0;
}
if (ret != -ENOSPC && ret != -EOPNOTSUPP && ret != 1)
sdata_err(sdata,
"failed to set key (%d, %pM) to hardware (%d)\n",
key->conf.keyidx,
sta ? sta->sta.addr : bcast_addr, ret);
out_unsupported:
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
case WLAN_CIPHER_SUITE_TKIP:
case WLAN_CIPHER_SUITE_CCMP:
case WLAN_CIPHER_SUITE_AES_CMAC:
/* all of these we can do in software - if driver can */
if (ret == 1)
return 0;
if (key->local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL)
return -EINVAL;
return 0;
default:
return -EINVAL;
}
}
