DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES( PCB_BASE_FRAME* aParent, const SELECTION& aItems ) :
DIALOG_TRACK_VIA_PROPERTIES_BASE( aParent ), m_items( aItems ),
m_trackStartX( aParent, m_TrackStartXCtrl, m_TrackStartXUnit ),
m_trackStartY( aParent, m_TrackStartYCtrl, m_TrackStartYUnit ),
m_trackEndX( aParent, m_TrackEndXCtrl, m_TrackEndXUnit ),
m_trackEndY( aParent, m_TrackEndYCtrl, m_TrackEndYUnit ),
m_trackWidth( aParent, m_TrackWidthCtrl, m_TrackWidthUnit ),
m_viaX( aParent, m_ViaXCtrl, m_ViaXUnit ), m_viaY( aParent, m_ViaYCtrl, m_ViaYUnit ),
m_viaDiameter( aParent, m_ViaDiameterCtrl, m_ViaDiameterUnit ),
m_viaDrill( aParent, m_ViaDrillCtrl, m_ViaDrillUnit ),
m_tracks( false ), m_vias( false )
{
wxASSERT( !m_items.Empty() );
// This is a way to trick gcc into considering these variables as initialized
OPT<int> trackStartX = NULLOPT;
OPT<int> trackStartY = NULLOPT;
OPT<int> trackEndX = NULLOPT;
OPT<int> trackEndY = NULLOPT;
OPT<int> trackWidth = NULLOPT;
OPT<PCB_LAYER_ID> trackLayer = NULLOPT;
OPT<int> viaX = NULLOPT;
OPT<int> viaY = NULLOPT;
OPT<int> viaDiameter = NULLOPT;
OPT<int> viaDrill = NULLOPT;
VIATYPE_T viaType = VIA_NOT_DEFINED;
PCB_LAYER_ID viaStartLayer = UNDEFINED_LAYER;
PCB_LAYER_ID viaEndLayer = UNDEFINED_LAYER;
m_haveUniqueNet = true;
int prevNet = -1;
m_NetComboBox->SetBoard( aParent->GetBoard() );
m_NetComboBox->Enable( true );
bool hasLocked = false;
bool hasUnlocked = false;
for( auto& item : m_items )
{
int net = static_cast<BOARD_CONNECTED_ITEM*>(item)->GetNetCode();
if( prevNet >= 0 && net != prevNet )
{
printf("prev %d net %d\n", net, prevNet );
m_haveUniqueNet = false;
break;
}
prevNet = net;
}
if ( m_haveUniqueNet )
{
m_NetComboBox->SetSelectedNet( prevNet );
}
else
{
m_NetComboBox->SetMultiple( true );
}
// Look for values that are common for every item that is selected
for( auto& item : m_items )
{
switch( item->Type() )
{
case PCB_TRACE_T:
{
const TRACK* t = static_cast<const TRACK*>( item );
if( !m_tracks ) // first track in the list
{
trackStartX = t->GetStart().x;
trackStartY = t->GetStart().y;
trackEndX = t->GetEnd().x;
trackEndY = t->GetEnd().y;
trackWidth = t->GetWidth();
trackLayer = t->GetLayer();
m_tracks = true;
}
else // check if values are the same for every selected track
{
if( trackStartX && ( *trackStartX != t->GetStart().x ) )
trackStartX = NULLOPT;
if( trackStartY && ( *trackStartY != t->GetStart().y ) )
trackStartY = NULLOPT;
if( trackEndX && ( *trackEndX != t->GetEnd().x ) )
trackEndX = NULLOPT;
if( trackEndY && ( *trackEndY != t->GetEnd().y ) )
trackEndY = NULLOPT;
if( trackWidth && ( *trackWidth != t->GetWidth() ) )
trackWidth = NULLOPT;
if( trackLayer && ( *trackLayer != t->GetLayer() ) )
trackLayer = NULLOPT;
}
if( t->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
case PCB_VIA_T:
{
const VIA* v = static_cast<const VIA*>( item );
if( !m_vias ) // first via in the list
{
viaX = v->GetPosition().x;
viaY = v->GetPosition().y;
viaDiameter = v->GetWidth();
viaDrill = v->GetDrillValue();
m_vias = true;
viaType = v->GetViaType();
viaStartLayer = v->TopLayer();
viaEndLayer = v->BottomLayer();
}
else // check if values are the same for every selected via
{
if( viaX && ( *viaX != v->GetPosition().x ) )
viaX = NULLOPT;
if( viaY && ( *viaY != v->GetPosition().y ) )
viaY = NULLOPT;
if( viaDiameter && ( *viaDiameter != v->GetWidth() ) )
viaDiameter = NULLOPT;
if( viaDrill && ( *viaDrill != v->GetDrillValue() ) )
viaDrill = NULLOPT;
if( viaType != v->GetViaType() )
viaType = VIA_NOT_DEFINED;
if( viaStartLayer != v->TopLayer() )
viaStartLayer = UNDEFINED_LAYER;
if( viaEndLayer != v->BottomLayer() )
viaEndLayer = UNDEFINED_LAYER;
}
if( v->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
default:
{
wxASSERT( false );
break;
}
}
}
wxASSERT( m_tracks || m_vias );
if( m_vias )
{
setCommonVal( viaX, m_ViaXCtrl, m_viaX );
setCommonVal( viaY, m_ViaYCtrl, m_viaY );
setCommonVal( viaDiameter, m_ViaDiameterCtrl, m_viaDiameter );
setCommonVal( viaDrill, m_ViaDrillCtrl, m_viaDrill );
m_DesignRuleViasUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
int viaSelection = wxNOT_FOUND;
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_ViasDimensionsList.size(); ii++ )
{
VIA_DIMENSION* viaDimension = &aParent->GetDesignSettings().m_ViasDimensionsList[ii];
wxString msg = StringFromValue( g_UserUnit, viaDimension->m_Diameter, false )
+ " / " + StringFromValue( g_UserUnit, viaDimension->m_Drill, false );
m_DesignRuleViasCtrl->Append( msg, viaDimension );
if( viaSelection == wxNOT_FOUND && viaDiameter == viaDimension->m_Diameter
&& viaDrill == viaDimension->m_Drill )
{
viaSelection = ii;
}
}
m_DesignRuleViasCtrl->SetSelection( viaSelection );
m_DesignRuleViasCtrl->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaSelect ), NULL, this );
m_ViaDiameterCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaDrillCtrl->Connect( wxEVT_TEXT, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaTypeChoice->Connect( wxEVT_CHOICE, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onViaEdit ), NULL, this );
m_ViaDiameterCtrl->SetFocus();
m_ViaTypeChoice->Enable();
if( viaType == VIA_THROUGH )
m_ViaTypeChoice->SetSelection( 0 );
else if( viaType == VIA_MICROVIA )
m_ViaTypeChoice->SetSelection( 1 );
else if ( viaType == VIA_BLIND_BURIED )
m_ViaTypeChoice->SetSelection( 2 );
else if( viaType == VIA_NOT_DEFINED )
m_ViaTypeChoice->SetSelection( 3 );
m_ViaStartLayer->SetLayersHotkeys( false );
m_ViaStartLayer->SetLayerSet( LSET::AllNonCuMask() );
m_ViaStartLayer->SetBoardFrame( aParent );
m_ViaStartLayer->Resync();
m_ViaEndLayer->SetLayersHotkeys( false );
m_ViaEndLayer->SetLayerSet( LSET::AllNonCuMask() );
m_ViaEndLayer->SetBoardFrame( aParent );
m_ViaEndLayer->Resync();
m_ViaStartLayer->SetLayerSelection( viaStartLayer );
m_ViaEndLayer->SetLayerSelection( viaEndLayer );
m_ViaStartLayer->Enable( false );
m_ViaEndLayer->Enable( false );
if( viaType != VIA_THROUGH ) // check if selected type isnt through.
{
m_ViaStartLayer->Enable();
m_ViaEndLayer->Enable();
}
}
else
{
m_MainSizer->Hide( m_sbViaSizer, true );
}
if( m_tracks )
{
setCommonVal( trackStartX, m_TrackStartXCtrl, m_trackStartX );
setCommonVal( trackStartY, m_TrackStartYCtrl, m_trackStartY );
setCommonVal( trackEndX, m_TrackEndXCtrl, m_trackEndX );
setCommonVal( trackEndY, m_TrackEndYCtrl, m_trackEndY );
setCommonVal( trackWidth, m_TrackWidthCtrl, m_trackWidth );
for( unsigned ii = 0; ii < aParent->GetDesignSettings().m_TrackWidthList.size(); ii++ )
{
int width = aParent->GetDesignSettings().m_TrackWidthList[ii];
wxString msg = StringFromValue( g_UserUnit, width, false );
m_TrackWidthCtrl->Append( msg );
}
m_TrackLayerCtrl->SetLayersHotkeys( false );
m_TrackLayerCtrl->SetLayerSet( LSET::AllNonCuMask() );
m_TrackLayerCtrl->SetBoardFrame( aParent );
m_TrackLayerCtrl->Resync();
if( trackLayer )
m_TrackLayerCtrl->SetLayerSelection( *trackLayer );
m_TrackWidthCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbTrackSizer, true );
}
if( hasLocked && hasUnlocked )
{
m_lockedCbox->Set3StateValue( wxCHK_UNDETERMINED );
}
else if( hasLocked )
{
m_lockedCbox->Set3StateValue( wxCHK_CHECKED );
}
else
{
m_lockedCbox->Set3StateValue( wxCHK_UNCHECKED );
}
m_StdButtonsOK->SetDefault();
// Pressing ENTER when any of the text input fields is active applies changes
Connect( wxEVT_TEXT_ENTER, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onOkClick ),
NULL, this );
}
DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES( PCB_BASE_FRAME* aParent, const SELECTION& aItems ) :
DIALOG_TRACK_VIA_PROPERTIES_BASE( aParent ), m_items( aItems ),
m_trackStartX( aParent, m_TrackStartXCtrl, m_TrackStartXUnit ),
m_trackStartY( aParent, m_TrackStartYCtrl, m_TrackStartYUnit ),
m_trackEndX( aParent, m_TrackEndXCtrl, m_TrackEndXUnit ),
m_trackEndY( aParent, m_TrackEndYCtrl, m_TrackEndYUnit ),
m_trackWidth( aParent, m_TrackWidthCtrl, m_TrackWidthUnit ),
m_viaX( aParent, m_ViaXCtrl, m_ViaXUnit ), m_viaY( aParent, m_ViaYCtrl, m_ViaYUnit ),
m_viaDiameter( aParent, m_ViaDiameterCtrl, m_ViaDiameterUnit ),
m_viaDrill( aParent, m_ViaDrillCtrl, m_ViaDrillUnit ),
m_tracks( false ), m_vias( false )
{
assert( !m_items.Empty() );
// This is a way to trick gcc into considering these variables as initialized
boost::optional<int> trackStartX = boost::make_optional<int>( false, 0 );
boost::optional<int> trackStartY = boost::make_optional<int>( false, 0 );
boost::optional<int> trackEndX = boost::make_optional<int>( false, 0 );
boost::optional<int> trackEndY = boost::make_optional<int>( false, 0 );
boost::optional<int> trackWidth = boost::make_optional<int>( false, 0 );
boost::optional<LAYER_ID> trackLayer = boost::make_optional<LAYER_ID>( false, (LAYER_ID) 0 );
boost::optional<int> viaX, viaY, viaDiameter;
boost::optional<int> viaDrill = boost::make_optional<int>( false, 0 );
bool hasLocked = false;
bool hasUnlocked = false;
// Look for values that are common for every item that is selected
for( auto& item : m_items )
{
switch( item->Type() )
{
case PCB_TRACE_T:
{
const TRACK* t = static_cast<const TRACK*>( item );
if( !m_tracks ) // first track in the list
{
trackStartX = t->GetStart().x;
trackStartY = t->GetStart().y;
trackEndX = t->GetEnd().x;
trackEndY = t->GetEnd().y;
trackWidth = t->GetWidth();
trackLayer = t->GetLayer();
m_tracks = true;
}
else // check if values are the same for every selected track
{
if( trackStartX && ( *trackStartX != t->GetStart().x ) )
trackStartX = boost::none;
if( trackStartY && ( *trackStartY != t->GetStart().y ) )
trackStartY = boost::none;
if( trackEndX && ( *trackEndX != t->GetEnd().x ) )
trackEndX = boost::none;
if( trackEndY && ( *trackEndY != t->GetEnd().y ) )
trackEndY = boost::none;
if( trackWidth && ( *trackWidth != t->GetWidth() ) )
trackWidth = boost::none;
if( trackLayer && ( *trackLayer != t->GetLayer() ) )
trackLayer = boost::none;
}
if( t->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
case PCB_VIA_T:
{
const VIA* v = static_cast<const VIA*>( item );
if( !m_vias ) // first via in the list
{
viaX = v->GetPosition().x;
viaY = v->GetPosition().y;
viaDiameter = v->GetWidth();
viaDrill = v->GetDrillValue();
m_vias = true;
}
else // check if values are the same for every selected via
{
if( viaX && ( *viaX != v->GetPosition().x ) )
viaX = boost::none;
if( viaY && ( *viaY != v->GetPosition().y ) )
viaY = boost::none;
if( viaDiameter && ( *viaDiameter != v->GetWidth() ) )
viaDiameter = boost::none;
if( viaDrill && ( *viaDrill != v->GetDrillValue() ) )
viaDrill = boost::none;
}
if( v->IsLocked() )
hasLocked = true;
else
hasUnlocked = true;
break;
}
default:
assert( false );
break;
}
}
assert( m_tracks || m_vias );
if( m_vias )
{
setCommonVal( viaX, m_ViaXCtrl, m_viaX );
setCommonVal( viaY, m_ViaYCtrl, m_viaY );
setCommonVal( viaDiameter, m_ViaDiameterCtrl, m_viaDiameter );
setCommonVal( viaDrill, m_ViaDrillCtrl, m_viaDrill );
m_ViaDiameterCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbViaSizer, true );
}
if( m_tracks )
{
setCommonVal( trackStartX, m_TrackStartXCtrl, m_trackStartX );
setCommonVal( trackStartY, m_TrackStartYCtrl, m_trackStartY );
setCommonVal( trackEndX, m_TrackEndXCtrl, m_trackEndX );
setCommonVal( trackEndY, m_TrackEndYCtrl, m_trackEndY );
setCommonVal( trackWidth, m_TrackWidthCtrl, m_trackWidth );
m_TrackLayerCtrl->SetLayersHotkeys( false );
m_TrackLayerCtrl->SetLayerSet( LSET::AllNonCuMask() );
m_TrackLayerCtrl->SetBoardFrame( aParent );
m_TrackLayerCtrl->Resync();
if( trackLayer )
m_TrackLayerCtrl->SetLayerSelection( *trackLayer );
m_TrackWidthCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbTrackSizer, true );
}
if( hasLocked && hasUnlocked )
{
m_lockedCbox->Set3StateValue( wxCHK_UNDETERMINED );
}
else if( hasLocked )
{
m_lockedCbox->Set3StateValue( wxCHK_CHECKED );
}
else
{
m_lockedCbox->Set3StateValue( wxCHK_UNCHECKED );
}
m_StdButtonsOK->SetDefault();
FixOSXCancelButtonIssue();
// Pressing ENTER when any of the text input fields is active applies changes
Connect( wxEVT_TEXT_ENTER, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onOkClick ), NULL, this );
}
DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES( PCB_BASE_FRAME* aParent, const SELECTION& aItems ) :
DIALOG_TRACK_VIA_PROPERTIES_BASE( aParent ), m_items( aItems ),
m_trackStartX( aParent, m_TrackStartXCtrl, m_TrackStartXUnit ),
m_trackStartY( aParent, m_TrackStartYCtrl, m_TrackStartYUnit ),
m_trackEndX( aParent, m_TrackEndXCtrl, m_TrackEndXUnit ),
m_trackEndY( aParent, m_TrackEndYCtrl, m_TrackEndYUnit ),
m_trackWidth( aParent, m_TrackWidthCtrl, m_TrackWidthUnit ),
m_viaX( aParent, m_ViaXCtrl, m_ViaXUnit ), m_viaY( aParent, m_ViaYCtrl, m_ViaYUnit ),
m_viaDiameter( aParent, m_ViaDiameterCtrl, m_ViaDiameterUnit ),
m_viaDrill( aParent, m_ViaDrillCtrl, m_ViaDrillUnit ),
m_tracks( false ), m_vias( false )
{
assert( !m_items.Empty() );
boost::optional<int> trackStartX, trackStartY, trackEndX, trackEndY, trackWidth;
boost::optional<LAYER_ID> trackLayer;
boost::optional<int> viaX, viaY, viaDiameter, viaDrill;
// Look for values that are common for every item that is selected
for( int i = 0; i < m_items.Size(); ++i )
{
const BOARD_ITEM* item = m_items.Item<BOARD_ITEM>( i );
switch( item->Type() )
{
case PCB_TRACE_T:
{
const TRACK* t = static_cast<const TRACK*>( item );
if( !m_tracks ) // first track in the list
{
trackStartX = t->GetStart().x;
trackStartY = t->GetStart().y;
trackEndX = t->GetEnd().x;
trackEndY = t->GetEnd().y;
trackWidth = t->GetWidth();
trackLayer = t->GetLayer();
m_tracks = true;
}
else // check if values are the same for every selected track
{
if( trackStartX && *trackStartX != t->GetStart().x )
trackStartX = boost::none;
if( trackStartY && *trackStartY != t->GetStart().y )
trackStartY = boost::none;
if( trackEndX && *trackEndX != t->GetEnd().x )
trackEndX = boost::none;
if( trackEndY && *trackEndY != t->GetEnd().y )
trackEndY = boost::none;
if( trackWidth && *trackWidth != t->GetWidth() )
trackWidth = boost::none;
if( trackLayer && *trackLayer != t->GetLayer() )
trackLayer = boost::none;
}
break;
}
case PCB_VIA_T:
{
const VIA* v = static_cast<const VIA*>( item );
if( !m_vias ) // first via in the list
{
viaX = v->GetPosition().x;
viaY = v->GetPosition().y;
viaDiameter = v->GetWidth();
viaDrill = v->GetDrillValue();
m_vias = true;
}
else // check if values are the same for every selected via
{
if( viaX && *viaX != v->GetPosition().x )
viaX = boost::none;
if( viaY && *viaY != v->GetPosition().y )
viaY = boost::none;
if( viaDiameter && *viaDiameter != v->GetWidth() )
viaDiameter = boost::none;
if( viaDrill && *viaDrill != v->GetDrillValue() )
viaDrill = boost::none;
}
break;
}
default:
assert( false );
break;
}
}
assert( m_tracks || m_vias );
if( m_vias )
{
setCommonVal( viaX, m_ViaXCtrl, m_viaX );
setCommonVal( viaY, m_ViaYCtrl, m_viaY );
setCommonVal( viaDiameter, m_ViaDiameterCtrl, m_viaDiameter );
setCommonVal( viaDrill, m_ViaDrillCtrl, m_viaDrill );
m_ViaDiameterCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbViaSizer, true );
}
if( m_tracks )
{
setCommonVal( trackStartX, m_TrackStartXCtrl, m_trackStartX );
setCommonVal( trackStartY, m_TrackStartYCtrl, m_trackStartY );
setCommonVal( trackEndX, m_TrackEndXCtrl, m_trackEndX );
setCommonVal( trackEndY, m_TrackEndYCtrl, m_trackEndY );
setCommonVal( trackWidth, m_TrackWidthCtrl, m_trackWidth );
m_TrackLayerCtrl->SetLayersHotkeys( false );
m_TrackLayerCtrl->SetLayerSet( LSET::AllNonCuMask() );
m_TrackLayerCtrl->SetBoardFrame( aParent );
m_TrackLayerCtrl->Resync();
if( trackLayer )
m_TrackLayerCtrl->SetLayerSelection( *trackLayer );
m_TrackWidthCtrl->SetFocus();
}
else
{
m_MainSizer->Hide( m_sbTrackSizer, true );
}
m_StdButtonsOK->SetDefault();
FixOSXCancelButtonIssue();
// Now all widgets have the size fixed, call FinishDialogSettings
FinishDialogSettings();
// Pressing ENTER when any of the text input fields is active applies changes
Connect( wxEVT_TEXT_ENTER, wxCommandEventHandler( DIALOG_TRACK_VIA_PROPERTIES::onOkClick ), NULL, this );
}
