static int lm3556_s_flash_mode(struct v4l2_subdev *sd, u32 val)
{
int ret;
enum atomisp_flash_mode new_mode = (enum atomisp_flash_mode)val;
struct lm3556_priv *p_lm3556_priv = to_lm3556_priv(sd);
pr_debug("%s %d", __func__, val);
switch (new_mode) {
case ATOMISP_FLASH_MODE_OFF:
/* FIXME: controller isn't setting flash mode for flash
ret = set_reg_field(sd, &enable, LM3556_MODE_SHUTDOWN);
break;
*/
case ATOMISP_FLASH_MODE_FLASH:
ret = set_reg_field(sd, &enable, LM3556_MODE_FLASH);
break;
case ATOMISP_FLASH_MODE_INDICATOR:
ret = set_reg_field(sd, &enable, LM3556_MODE_INDICATOR);
break;
case ATOMISP_FLASH_MODE_TORCH:
ret = set_reg_field(sd, &enable, LM3556_MODE_TORCH);
break;
default:
ret = -EINVAL;
}
if (ret == 0)
p_lm3556_priv->mode = new_mode;
return ret;
}
static int lm3554_s_flash_mode(struct v4l2_subdev *sd, u32 val)
{
int ret;
enum atomisp_flash_mode new_mode = (enum atomisp_flash_mode)val;
struct lm3554_priv *p_lm3554_priv = to_lm3554_priv(sd);
switch (new_mode) {
case ATOMISP_FLASH_MODE_OFF:
if (p_lm3554_priv->mode == ATOMISP_FLASH_MODE_FLASH) {
ret = set_reg_field(sd, &flash_mode,
LM3554_MODE_SHUTDOWN);
} else {
ret = set_reg_field(sd, &torch_mode,
LM3554_MODE_SHUTDOWN);
}
break;
case ATOMISP_FLASH_MODE_FLASH:
ret = set_reg_field(sd, &flash_mode, LM3554_MODE_FLASH);
break;
case ATOMISP_FLASH_MODE_INDICATOR:
ret = set_reg_field(sd, &flash_mode, LM3554_MODE_INDICATOR);
break;
case ATOMISP_FLASH_MODE_TORCH:
ret = set_reg_field(sd, &torch_mode, LM3554_MODE_TORCH);
break;
default:
ret = -EINVAL;
}
if (ret == 0)
p_lm3554_priv->mode = new_mode;
return ret;
}
static int lm3554_s_flash_strobe(struct v4l2_subdev *sd, u32 val)
{
int ret, timer_pending;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct lm3554_priv *p_lm3554_priv = to_lm3554_priv(sd);
struct camera_flash_platform_data *pdata = p_lm3554_priv->platform_data;
/*
* An abnormal high flash current is observed when strobe off the
* flash. Workaround here is firstly set flash current to lower level,
* wait a short moment, and then strobe off the flash.
*/
timer_pending = del_timer_sync(&p_lm3554_priv->flash_off_delay);
/* Flash off */
if (!val) {
/* set current to 70mA and wait a while */
ret = set_reg_field(sd, &flash_current, 0);
if (ret < 0)
goto err;
mod_timer(&p_lm3554_priv->flash_off_delay,
jiffies + msecs_to_jiffies(LM3554_TIMER_DELAY));
return 0;
}
/* Flash on */
/*
* If timer is killed before run, flash is not strobe off,
* so must strobe off here
*/
if (timer_pending != 0) {
ret = set_gpio_output(pdata->gpio_strobe, "flash", 0);
if (ret < 0)
goto err;
}
/* Restore flash current settings */
ret = set_reg_field(sd, &flash_current,
(u8)p_lm3554_priv->intensity);
if (ret < 0)
goto err;
/* Strobe on Flash */
ret = set_gpio_output(pdata->gpio_strobe, "flash", val);
if (ret < 0)
goto err;
return 0;
err:
dev_err(&client->dev, "failed to generate flash strobe (%d)\n",
ret);
return ret;
}
static int lm3554_detect(struct i2c_client *client)
{
s32 status;
struct i2c_adapter *adapter = client->adapter;
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct lm3554_priv *p_lm3554_priv = to_lm3554_priv(sd);
struct camera_flash_platform_data *pdata = p_lm3554_priv->platform_data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "lm3554_detect i2c error\n");
return -ENODEV;
}
lm3554_hw_reset(client);
ret = set_gpio_output(pdata->gpio_strobe, "flash", 0);
if (ret < 0)
goto fail;
ret = set_gpio_output(pdata->gpio_torch, "torch", 0);
if (ret < 0)
goto fail;
/* Set to TX2 mode, then ENVM/TX2 pin is a power
* amplifier sync input:
* ENVM/TX pin asserted, flash forced into torch;
* ENVM/TX pin desserted, flash set back;
*/
ret = set_reg_field(sd, &envm_tx2, 1);
if (ret < 0)
goto fail;
ret = set_reg_field(sd, &tx2_polarity, 0);
if (ret < 0)
goto fail;
/* set peak current limit to be 1000mA */
ret = set_reg_field(sd, ¤t_limit, 0);
if (ret < 0)
goto fail;
/* clear the flags register */
ret = lm3554_g_flash_status(sd, &status);
if (ret < 0)
goto fail;
dev_dbg(&client->dev, "Successfully detected lm3554 LED flash\n");
return 0;
fail:
dev_err(&client->dev, "gpio request/direction_output fail");
return ret;
}
static int lm3556_detect(struct i2c_client *client)
{
u32 status;
struct i2c_adapter *adapter = client->adapter;
struct v4l2_subdev *sd = i2c_get_clientdata(client);
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "lm3556_detect i2c error\n");
return -ENODEV;
}
lm3556_hw_reset(client);
ret = gpio_direction_output(GP_LM3556_FLASH_STROBE, 0);
if (ret < 0)
goto fail;
ret = set_reg_field(sd, &configure, 0xF8);
if (ret < 0)
goto fail;
/* clear the flags register */
ret = lm3556_g_flash_status(sd, &status);
if (ret < 0)
goto fail;
dev_dbg(&client->dev, "Successfully detected lm3556 LED flash\n");
return 0;
fail:
dev_err(&client->dev, "lm3556_detect fail........");
return ret;
}
static int lm3556_s_flash_strobe(struct v4l2_subdev *sd, u32 val)
{
int ret;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct lm3556_priv *p_lm3556_priv = to_lm3556_priv(sd);
pr_debug("%s %d", __func__, val);
ret = gpio_direction_output(GP_LM3556_FLASH_STROBE, val);
if (ret < 0) {
dev_err(&client->dev, "failed to generate flash strobe (%d)\n",
ret);
return ret;
}
if (val == 0 && p_lm3556_priv->mode == ATOMISP_FLASH_MODE_OFF) {
/* Driver requires mode bits to get reset after flash event */
usleep_range(5000, 5000);
ret = set_reg_field(sd, &enable, LM3556_MODE_FLASH);
if (ret < 0) {
dev_err(&client->dev, "failed to reset flash mode"
"(%d)\n", ret);
return ret;
}
}
return 0;
}
static int lm3554_s_indicator_intensity(struct v4l2_subdev *sd, u32 intensity)
{
intensity = LM3554_CLAMP_PERCENTAGE(intensity);
intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_INDICATOR_STEP);
return set_reg_field(sd, &indicator_current, (u8)intensity);
}
static int lm3554_s_torch_intensity(struct v4l2_subdev *sd, u32 intensity)
{
intensity = LM3554_CLAMP_PERCENTAGE(intensity);
intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_TORCH_STEP);
return set_reg_field(sd, &torch_current, (u8)intensity);
}
static int lm3556_s_indicator_intensity(struct v4l2_subdev *sd, u32 intensity)
{
pr_debug("%s %d\n", __func__, intensity);
intensity = LM3556_CLAMP_PERCENTAGE(intensity);
intensity = LM3556_PERCENT_TO_VALUE(intensity, LM3556_INDICATOR_STEP);
return set_reg_field(sd, &indicator_current, (u8)intensity);
}
static int lm3554_s_flash_timeout(struct v4l2_subdev *sd, u32 val)
{
struct lm3554_priv *p_lm3554 = to_lm3554_priv(sd);
val = clamp(val, LM3554_MIN_TIMEOUT, LM3554_MAX_TIMEOUT);
p_lm3554->timeout = val;
val = val / LM3554_TIMEOUT_STEPSIZE - 1;
return set_reg_field(sd, &flash_timeout, (u8)val);
}
static int lm3554_s_flash_intensity(struct v4l2_subdev *sd, u32 intensity)
{
struct lm3554_priv *p_lm3554_priv = to_lm3554_priv(sd);
intensity = LM3554_CLAMP_PERCENTAGE(intensity);
intensity = LM3554_PERCENT_TO_VALUE(intensity, LM3554_FLASH_STEP);
p_lm3554_priv->intensity = intensity;
return set_reg_field(sd, &flash_current, (u8)intensity);
}
static int lm3556_s_flash_intensity(struct v4l2_subdev *sd, u32 intensity)
{
pr_debug("%s %d\n", __func__, intensity);
intensity = LM3556_CLAMP_PERCENTAGE(intensity);
intensity = LM3556_PERCENT_TO_VALUE(intensity, LM3556_FLASH_STEP);
if (intensity > LM3556_FLASH_MAX_LVL)
intensity = LM3556_FLASH_MAX_LVL;
return set_reg_field(sd, &flash_current, (u8)intensity);
}
static int lm3556_s_flash_timeout(struct v4l2_subdev *sd, u32 val)
{
struct lm3556_priv *p_lm3556 = to_lm3556_priv(sd);
pr_debug("%s %d\n", __func__, val);
val = clamp(val, LM3556_MIN_TIMEOUT, LM3556_MAX_TIMEOUT);
p_lm3556->timeout = val;
val = val / LM3556_TIMEOUT_STEPSIZE - 1;
return set_reg_field(sd, &flash_timeout, (u8)val);
}
