C++ (Cpp) set_tris_f Exemples

Exemple #1

Fichier : ddd.c Projet : suleymancanan/RFID-PRJ-TX

//=============================================================================
void init_prog(void)
{
setup_wdt(WDT_OFF);
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_psp(PSP_DISABLED);                                                
setup_spi(SPI_SS_DISABLED);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_16|RTCC_8_BIT);// TIMER0
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
setup_comparator(NC_NC_NC_NC);                                           
setup_vref(FALSE);
setup_low_volt_detect(FALSE);              
setup_oscillator(OSC_32MHZ);                                        

set_tris_a(0xFF);//7F
set_tris_b(0xFF); //FF
set_tris_c(0x94);//94
set_tris_d(0xFF); //02                                     
set_tris_e(0xF0);  //f0   
set_tris_f(0xFF);//ff
set_tris_g(0xFC); //04
output_a(0x00);
output_b(0x00);
output_c(0x00);
output_d(0x00);
output_e(0x00);
output_f(0x00);
output_g(0x00);
}

Exemple #2

Fichier : pic18_usb.c Projet : J1M/PSGradePIC

// see usb_hw_layer.h for documentation
void usb_detach(void)
{
   UCON = 0;  //disable USB hardware
   UIE = 0;   //disable USB interrupts
   UCFG = __UCFG_VAL_DISABLED__;
   
   // set D+/D- to inputs
  #if defined(__USB_87J50__)
   set_tris_f(get_tris_f() | 0x18);
  #elif defined(__USB_K50__)
   set_tris_a(get_tris_a() | 0x3);
  #else
   set_tris_c(get_tris_c() | 0x30);
  #endif
  
   usb_state = USB_STATE_DETACHED;
   
   usb_token_reset();              //clear the chapter9 stack
   //__usb_kbhit_status=0;
}

Exemple #3

Fichier : ALGFRM-RFID.c Projet : suleymancanan/ALGIFARM-PRJ

//------------------------------------------------------------------------------
void init_prog(void)
{
setup_wdt(WDT_OFF);
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_psp(PSP_DISABLED);                                                
setup_spi(SPI_SS_DISABLED);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_16|RTCC_8_BIT);// TIMER0
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
setup_comparator(NC_NC_NC_NC);                                           
setup_vref(FALSE);
setup_low_volt_detect(FALSE);              
setup_oscillator(OSC_32MHZ);                                        

set_tris_a(0x00);
set_tris_b(0x24); 
set_tris_c(0x80);
set_tris_d(0x00);                                      
set_tris_e(0x15);     
set_tris_f(0x58);
set_tris_g(0x10);
output_a(0x00);
output_b(0x00);
output_c(0x00);
output_d(0x00);
output_e(0x00);
output_f(0x00);
output_g(0x00);
// RF Modul and PA/LNA activation
 
   IOpin.modulepower=0;
   IOpin.moduleCTX=1;
   IOpin.moduleCPS=0;
   IOpin.modulePWRUP=1;
   
}