static int sfh7743_misc_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
u8 enable;
struct sfh7743_data *sfh = file->private_data;
switch (cmd) {
case SFH7743_IOCTL_SET_ENABLE:
if (copy_from_user(&enable, argp, 1))
return -EFAULT;
if (enable > 1)
return -EINVAL;
if (enable != 0)
sfh7743_enable(sfh);
else
sfh7743_disable(sfh);
break;
case SFH7743_IOCTL_GET_ENABLE:
enable = atomic_read(&sfh->enabled);
if (copy_to_user(argp, &enable, 1))
return -EINVAL;
break;
default:
return -EINVAL;
}
return 0;
}
static int sfh7743_resume(struct platform_device *pdev)
{
struct sfh7743_data *sfh = platform_get_drvdata(pdev);
if (sfh->on_before_suspend)
return sfh7743_enable(sfh);
return 0;
}
static int sfh7743_fops_write (struct file *filp, const char __user *buf, size_t count, loff_t *f_pos)
{
if ( count > 3 )
return -EINVAL;
if (copy_from_user(writeBuf, buf, count))
return -EINVAL;
/* If disable requested */
if ( !(strncmp(writeBuf, "0", 1 ) ) )
{
sfh7743_enable(false);
}
/* If enable requested */
else
{
sfh7743_enable(true);
}
return E_OK;
} /* End sfh7743_fops_write */
/*!
* @brief Logs data
*
* This function is called to set the current mode (Enabled/Disabled) of
* of the proximity device
*
*/
static ssize_t sfh7743_set_mode(struct device *dev, struct device_attribute *att, const char *buf, size_t count)
{
/* If disable requested */
if ( !(strncmp(buf, "0", 1 ) ) )
{
sfh7743_enable(false);
}
/* If enable requested */
else
{
#ifdef CONFIG_MACH_MOT
#if 0
if (machine_is_motus() && (mot_hw_rev < 0x2F)) {
sfh7743_log(KERN_ERR "PROXIMITY SENSOR NOT"
"ENABLED FOR MOTUS P2 BOARDS (< 2F)\n");
return 0;
}
#endif
#endif
sfh7743_enable(true);
}
return 0;
}
static int sfh7743_probe(struct platform_device *pdev)
{
/* Initialize error condition to no-error */
int error = E_OK;
sfh7743_log(KERN_INFO "sfh7743_probe: Enter....\n");
/* Initialize input device */
sfh7743_info.idev = NULL;
/* Initialize interrupt values */
sfh7743_info.gpio_intr = -1;
sfh7743_info.gpio_en = -1;
#ifndef CONFIG_MACH_MOT
sfh7743_info.vreg_name = NULL;
sfh7743_info.vreg_en = NULL;
#endif
sfh7743_info.irq = -1;
sfh7743_info.state = 0;
/* Register IR prox device */
error = sfh7743_register();
if (error == E_OK)
{
/* Initialize the work queue */
INIT_WORK (&sfh7743_info.wq, sfh7743_irq_bottom_half);
/* GPIOs and IRQ config */
error = sfh7743_config_int(pdev);
if (error == E_OK)
{
/* Enable proximity sensor */
sfh7743_enable(false);
}
else
{
/* Unregistered what was previously registered */
sfh7743_unregister();
return error;
}
}
/* Report init status to log */
if (error == E_OK) {
#ifdef CONFIG_MACH_MOT
sfh7743_log(KERN_INFO "sfh7743_probe: initialized gpio_int[%d]"
"irq[%d] gpio_en[%d]\n", sfh7743_info.gpio_intr,
sfh7743_info.irq, sfh7743_info.gpio_en);
#else
sfh7743_log(KERN_INFO "sfh7743_probe: initialized gpio_int[%d]"
"irq[%d] gpio_en[%d] vreg_en[%s]\n", sfh7743_info.gpio_intr,
sfh7743_info.irq, sfh7743_info.gpio_en,
sfh7743_info.vreg_name);
#endif
}
else
{
sfh7743_log(KERN_ERR "sfh7743_probe: initialization failed: %d\n", error);
}
if ( (error = sysfs_create_group(&(pdev->dev.kobj), &sfh7743_attr_group) ))
{
sfh7743_log(KERN_INFO "sfh7743_probe: Exit....\n");
}
return error;
}
/** \fn static int sfh7743_config_int (void)
* \brief Configure sfh7743 sensor interrupt GPIOs and routine
* \return E_OK if successful, -1 if any failure occurred
*/
static int sfh7743_config_int (struct platform_device *pdev)
{
struct sfh7743_platform_data *pdata = pdev->dev.platform_data;
/* Initialize error condition to no-error */
int error = E_OK;
if ( !pdata )
return -EBUSY;
/* Read interrupt numbers from hardware config */
sfh7743_info.gpio_intr = pdata->gpio_intr;
sfh7743_info.gpio_en = pdata->gpio_en;
#ifndef CONFIG_MACH_MOT
sfh7743_info.vreg_name = pdata->vreg_en;
#endif
/* Ensure proper pin numbers are returned */
#ifdef CONFIG_MACH_MOT
if ((sfh7743_info.gpio_intr < 0) || (sfh7743_info.gpio_en < 0)) {
sfh7743_log(KERN_ERR "sfh7743_config_int: get_gpio failure\n");
#else
if ((sfh7743_info.gpio_intr<0) || ((sfh7743_info.gpio_en<0)&&(pdata->vreg_en==NULL)))
{
sfh7743_log(KERN_ERR "sfh7743_config_int: get_gpio/vreg_get failure\n");
#endif
goto sfh7743_error;
}
/* Configure change interrupt */
if (gpio_request(sfh7743_info.gpio_intr, SFH7743_MODULE_NAME) == E_OK)
{
/* Set gpio to input direction to allow irq signals */
if (gpio_direction_input(sfh7743_info.gpio_intr) != E_OK)
{
sfh7743_log(KERN_ERR "sfh7743_config_int: gpio_int direction error\n");
goto sfh7743_error_gpio_int_requested;
}
}
else
{
sfh7743_log(KERN_ERR "sfh7743_config_int: gpio_request error\n");
goto sfh7743_error;
}
/* Record irq value to structure. A negative value indicates an error */
sfh7743_info.irq = gpio_to_irq(sfh7743_info.gpio_intr);
/* Attempt setup of interrupt request handler if proper irq returned above.
* If either fails, indicate and exit */
if ( (sfh7743_info.irq<0) ||
(request_irq(sfh7743_info.irq, sfh7743_irq_handler,IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING|IRQF_SHARED,
SFH7743_MODULE_NAME, &sfh7743_info) != E_OK) )
{
sfh7743_log(KERN_ERR "sfh7743_config_int: irq request error\n");
goto sfh7743_error_gpio_int_requested;
}
#ifdef CONFIG_MACH_MOT
set_irq_wake(sfh7743_info.irq, 1);
#else
if (sfh7743_info.gpio_en < 0)
{
sfh7743_info.vreg_en = vreg_get(0, sfh7743_info.vreg_name);
goto sfh7743_no_cleanup;
}
#endif
/* Configure enable interrupt */
if (gpio_request(sfh7743_info.gpio_en, SFH7743_MODULE_NAME) == E_OK)
{
/* Set gpio to output direction to allow irq signals */
if (gpio_direction_output(sfh7743_info.gpio_en,0) == E_OK)
{
/* This is a "total success" condition, so the function is exited */
goto sfh7743_no_cleanup;
}
else
{
sfh7743_log(KERN_ERR "sfh7743_config_int: direction error\n");
goto sfh7743_error_gpio_en_requested;
}
}
else
{
sfh7743_log(KERN_ERR "sfh7743_config_int: gpio_request error\n");
goto sfh7743_error_irq_requested;
}
/* Naturally flowing into this destruction is impossible */
sfh7743_error_gpio_en_requested:
gpio_free (sfh7743_info.gpio_en);
sfh7743_error_irq_requested:
#ifdef CONFIG_MACH_MOT
set_irq_wake(sfh7743_info.irq, 0);
#endif
free_irq(sfh7743_info.irq, 0);
sfh7743_error_gpio_int_requested:
gpio_free(sfh7743_info.gpio_intr);
sfh7743_error:
sfh7743_info.gpio_intr = -1;
sfh7743_info.gpio_en = -1;
#ifndef CONFIG_MACH_MOT
sfh7743_info.vreg_name = NULL;
sfh7743_info.vreg_en = NULL;
#endif
sfh7743_info.irq = -1;
error = -1;
sfh7743_no_cleanup:
return error;
}
/** \fn void __exit sfh7743_exit (void)
* \brief sfh7743 driver cleanup function, called when the driver is destroyed
* \return void
*/
void __exit sfh7743_exit (void)
{
/* Disable proximity sensor */
sfh7743_enable(false);
/* Free irq */
if (sfh7743_info.irq != -1)
{
#ifdef CONFIG_MACH_MOT
set_irq_wake(sfh7743_info.irq, 0);
#endif
free_irq(sfh7743_info.irq, 0);
}
/* Free GPIOs */
if (sfh7743_info.gpio_intr != -1)
{
gpio_free(sfh7743_info.gpio_intr);
}
if (sfh7743_info.gpio_en != -1)
{
gpio_free(sfh7743_info.gpio_en);
}
/* prox_ir unregister */
if (sfh7743_info.idev)
{
sfh7743_unregister();
}
}
/** \fn static int sfh7743_fops_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
* \brief System response point to fop ioctl
* \return Error code where zero indicates no-error, or value depending on ioctl call
*/
static int sfh7743_fops_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
{
/** \var error
* \brief Return error code, initialized to no error
*/
int error = E_OK;
/* Temporary store */
long tmp_var;
uint8_t enable;
void __user *argp = (void __user *)arg;
/* Process the parameter command */
switch (cmd)
{
case SFH7743_IOCTL_GET_PRESENCE:
/* Get/return distance */
/* if devise is disable, return 0 */
if ( sfh7743_info.state )
{
sfh7743_log(KERN_INFO "sfh7743_fops_ioctl: device is enabled\n");
sfh7743_get_distance(&tmp_var);
sfh7743_log(KERN_INFO "sfh7743_fops_ioctl: Distance value: %d\n",tmp_var);
}
else
{
sfh7743_log(KERN_INFO "sfh7743_fops_ioctl: device is disabled\n");
tmp_var = 0;
}
error = tmp_var;
/*
error = copy_to_user(&arg, &tmp_var,sizeof(tmp_var));
if ( error != 0 )
{
sfh7743_log(KERN_INFO "sfh7743_fops_ioctl: Could not copy %d bytes to user space.\n",error);
}
*/
break;
case SFH7743_IOCTL_PUSH_PRESENCE:
/* Get/push-to-input distance */
sfh7743_get_distance(&tmp_var);
sfh7743_post_data(tmp_var);
break;
case SFH7743_IOCTL_SET_ENABLE:
if (copy_from_user(&enable, argp, 1))
return -EFAULT;
if (enable > 1)
return -EINVAL;
if (enable != 0)
sfh7743_enable(true);
else
sfh7743_enable(false);
break;
case SFH7743_IOCTL_ENABLE:
/* Disable proximity sensor */
sfh7743_enable(true);
break;
case SFH7743_IOCTL_DISABLE:
/* Disable proximity sensor */
sfh7743_enable(false);
break;
case SFH7743_IOCTL_GET_ENABLE:
#ifdef CONFIG_MACH_MOT
enable = gpio_get_value(sfh7743_info.gpio_en);
if (copy_to_user(argp, &enable, 1))
return -EINVAL;
#else
error = sfh7743_info.state;
#endif
break;
case SFH7743_IOCTL_GET_STATUS:
error = sfh7743_info.state;
break;
default:
sfh7743_log(KERN_ERR "sfh7743: invalid ioctl cmd supplied\n");
/* Indicate inappropriate ioctl for device */
error = -ENOTTY;
break;
} /* End switch (cmd) */
return error;
} /* End sfh7743_fops_ioctl */
int sfh7743_input_open(struct input_dev *input)
{
struct sfh7743_data *sfh = input_get_drvdata(input);
return sfh7743_enable(sfh);
}
