void up_sigdeliver(void)
{
#ifndef CONFIG_DISABLE_SIGNALS
FAR _TCB *rtcb = (_TCB*)g_readytorun.head;
chipreg_t regs[XCPTCONTEXT_REGS];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
up_ledon(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
ez80_copystate(regs, rtcb->xcp.regs);
regs[XCPT_PC] = rtcb->xcp.saved_pc;
regs[XCPT_I] = rtcb->xcp.saved_i;
/* Get a local copy of the sigdeliver function pointer. We do this so
* that we can nullify the sigdeliver function pointer in the TCB and
* accept more signal deliveries while processing the current pending
* signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state. */
irqrestore(regs[XCPT_I]);
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of
* execution.
*/
up_ledoff(LED_SIGNAL);
ez80_restorecontext(regs);
#endif
}
void up_sigdeliver(void)
{
struct tcb_s *rtcb = this_task();
uint32_t regs[XCPTCONTEXT_REGS];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_autoled_on(LED_SIGNAL);
svdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n", rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copyfullstate(regs, rtcb->xcp.regs);
regs[REG_PC] = rtcb->xcp.saved_pc;
regs[REG_CPSR] = rtcb->xcp.saved_cpsr;
/* Get a local copy of the sigdeliver function pointer. we do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
irqrestore(regs[REG_CPSR]);
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
svdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of execution. */
board_autoled_off(LED_SIGNAL);
#ifdef CONFIG_TASK_SCHED_HISTORY
/* Save the task name which will be scheduled */
save_task_scheduling_status(rtcb);
#endif
up_fullcontextrestore(regs);
}
void up_sigdeliver(void)
{
struct tcb_s *rtcb = (struct tcb_s*)g_readytorun.head;
uint32_t regs[XCPTCONTEXT_REGS];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_led_on(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copystate(regs, rtcb->xcp.regs);
regs[REG_EIP] = rtcb->xcp.saved_eip;
regs[REG_EFLAGS] = rtcb->xcp.saved_eflags;
/* Get a local copy of the sigdeliver function pointer. we do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
irqrestore(regs[REG_EFLAGS]);
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of execution. */
board_led_off(LED_SIGNAL);
up_fullcontextrestore(regs);
}
void up_sigdeliver(struct Trapframe *tf)
{
sig_deliver_t sigdeliver;
pop_xcptcontext(¤t_task->xcp);
sigdeliver = current_task->xcp.sigdeliver;
current_task->xcp.sigdeliver = NULL;
local_irq_enable();
sigdeliver(current_task);
local_irq_disable();
}
void up_sigdeliver(void)
{
_TCB *rtcb = (_TCB*)g_readytorun.head;
#if 0
uint32_t regs[XCPTCONTEXT_REGS+3]; /* Why +3? See below */
#else
uint32_t regs[XCPTCONTEXT_REGS];
#endif
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably EINTR).
*/
int saved_errno = rtcb->pterrno;
up_ledon(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copystate(regs, rtcb->xcp.regs);
regs[REG_PC] = rtcb->xcp.saved_pc;
regs[REG_SR] = rtcb->xcp.saved_sr;
/* Get a local copy of the sigdeliver function pointer. We do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
irqrestore(regs[REG_SR]);
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of execution. This is an
* unusual case that must be handled by up_fullcontextresore. This case is
* unusal in two ways:
*
* 1. It is not a context switch between threads. Rather, up_fullcontextrestore
* must behave more it more like a longjmp within the same task, using
* he same stack.
* 2. In this case, up_fullcontextrestore is called with r12 pointing to
* a register save area on the stack to be destroyed. This is
* dangerous because there is the very real possibility that the new
* stack pointer might overlap with the register save area and hat stack
* usage in up_fullcontextrestore might corrupt the register save data
* before the state is restored. At present, there does not appear to
* be any stack overlap problems. If there were, then adding 3 words
* to the size of register save structure size will protect its contents.
*/
up_ledoff(LED_SIGNAL);
up_fullcontextrestore(regs);
}
void up_sigdeliver(void)
{
struct tcb_s *rtcb = this_task();
uint32_t regs[XCPTCONTEXT_REGS];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_autoled_on(LED_SIGNAL);
sinfo("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copystate(regs, rtcb->xcp.regs);
regs[REG_EPC] = rtcb->xcp.saved_epc;
regs[REG_STATUS] = rtcb->xcp.saved_status;
/* Get a local copy of the sigdeliver function pointer. We do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
up_irq_restore((irqstate_t)regs[REG_STATUS]);
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sinfo("Resuming EPC: %08x STATUS: %08x\n", regs[REG_EPC], regs[REG_STATUS]);
(void)up_irq_save();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of
* execution.
*/
board_autoled_off(LED_SIGNAL);
up_fullcontextrestore(regs);
/* up_fullcontextrestore() should not return but could if the software
* interrupts are disabled.
*/
PANIC();
}
void up_sigdeliver(void)
{
/* NOTE the "magic" guard space added to regs. This is a little kludge
* because up_fullcontextrestore (called below) will do a stack-to-stack
* copy an may overwrite the regs[] array contents. Sorry.
*/
struct tcb_s *rtcb = (struct tcb_s*)g_readytorun.head;
uint32_t regs[XCPTCONTEXT_REGS + 4];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_led_on(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copyfullstate(regs, rtcb->xcp.regs);
regs[REG_PC] = rtcb->xcp.saved_pc;
regs[REG_PRIMASK] = rtcb->xcp.saved_primask;
regs[REG_XPSR] = rtcb->xcp.saved_xpsr;
#ifdef CONFIG_BUILD_PROTECTED
regs[REG_LR] = rtcb->xcp.saved_lr;
#endif
/* Get a local copy of the sigdeliver function pointer. We do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
irqrestore((uint8_t)regs[REG_PRIMASK]);
/* Deliver the signal */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of
* execution.
*/
board_led_off(LED_SIGNAL);
up_fullcontextrestore(regs);
}
void up_sigdeliver(void)
{
struct tcb_s *rtcb = this_task();
uint32_t regs[XCPTCONTEXT_REGS];
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_autoled_on(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copyfullstate(regs, rtcb->xcp.regs);
regs[REG_PC] = rtcb->xcp.saved_pc;
#ifdef CONFIG_ARMV7M_USEBASEPRI
regs[REG_BASEPRI] = rtcb->xcp.saved_basepri;
#else
regs[REG_PRIMASK] = rtcb->xcp.saved_primask;
#endif
regs[REG_XPSR] = rtcb->xcp.saved_xpsr;
#ifdef CONFIG_BUILD_PROTECTED
regs[REG_LR] = rtcb->xcp.saved_lr;
#endif
/* Get a local copy of the sigdeliver function pointer. We do this so that
* we can nullify the sigdeliver function pointer in the TCB and accept
* more signal deliveries while processing the current pending signals.
*/
sigdeliver = rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state */
#ifdef CONFIG_ARMV7M_USEBASEPRI
irqrestore((uint8_t)regs[REG_BASEPRI]);
#else
irqrestore((uint16_t)regs[REG_PRIMASK]);
#endif
/* Deliver the signal */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of
* execution.
*/
board_autoled_off(LED_SIGNAL);
up_fullcontextrestore(regs);
}
void up_sigdeliver(void)
{
#ifndef CONFIG_DISABLE_SIGNALS
FAR struct tcb_s *rtcb = (struct tcb_s*)g_readytorun.head;
chipreg_t regs[XCPTCONTEXT_REGS];
FAR uint32_t *regs32 = (FAR uint32_t*)regs;
sig_deliver_t sigdeliver;
/* Save the errno. This must be preserved throughout the signal handling
* so that the user code final gets the correct errno value (probably
* EINTR).
*/
int saved_errno = rtcb->pterrno;
board_led_on(LED_SIGNAL);
sdbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
/* Save the real return state on the stack. */
up_copystate(regs, rtcb->xcp.regs);
regs32[REG_PC/2] = rtcb->xcp.saved_pc;
regs[REG_FLAGS] = rtcb->xcp.saved_i;
/* Get a local copy of the sigdeliver function pointer. We do this so
* that we can nullify the sigdeliver function point in the TCB and
* accept more signal deliveries while processing the current pending
* signals.
*/
sigdeliver = (sig_deliver_t)rtcb->xcp.sigdeliver;
rtcb->xcp.sigdeliver = NULL;
/* Then restore the task interrupt state. */
if ((regs[REG_FLAGS] & Z16F_CNTRL_FLAGS_IRQE) != 0)
{
EI();
}
/* Deliver the signals */
sigdeliver(rtcb);
/* Output any debug messages BEFORE restoring errno (because they may
* alter errno), then disable interrupts again and restore the original
* errno that is needed by the user logic (it is probably EINTR).
*/
sdbg("Resuming\n");
(void)irqsave();
rtcb->pterrno = saved_errno;
/* Then restore the correct state for this thread of execution. */
board_led_off(LED_SIGNAL);
SIGNAL_RETURN(regs);
#endif
}