Exemple #1
0
void psxHwWrite8(u32 add, u8 value) {
    switch (add) {
    case 0x1f801040:
        sioWrite8(value);
        break;
#ifdef ENABLE_SIO1API
    case 0x1f801050:
        SIO1_writeData8(value);
        break;
#endif
    case 0x1f801800:
        cdrWrite0(value);
        break;
    case 0x1f801801:
        cdrWrite1(value);
        break;
    case 0x1f801802:
        cdrWrite2(value);
        break;
    case 0x1f801803:
        cdrWrite3(value);
        break;

    default:
        psxHu8ref(add) = value;
#ifdef PSXHW_LOG
        PSXHW_LOG("*Unknown 8bit write at address %x value %x\n", add, value);
#endif
        return;
    }
    psxHu8ref(add) = value;
#ifdef PSXHW_LOG
    PSXHW_LOG("*Known 8bit write at address %x value %x\n", add, value);
#endif
}
Exemple #2
0
static void io_write_sio32(u32 value)
{
	sioWrite8((unsigned char)value);
	sioWrite8((unsigned char)((value&0xff) >>  8));
	sioWrite8((unsigned char)((value&0xff) >> 16));
	sioWrite8((unsigned char)((value&0xff) >> 24));
}
Exemple #3
0
void psxHwWrite32(u32 add, u32 value) {
	switch (add) {
	    case 0x1f801040:
			sioWrite8((unsigned char)value);
			sioWrite8((unsigned char)((value&0xff) >>  8));
			sioWrite8((unsigned char)((value&0xff) >> 16));
			sioWrite8((unsigned char)((value&0xff) >> 24));
#ifdef PAD_LOG
			PAD_LOG("sio write32 %x\n", value);
#endif
			return;
#ifdef ENABLE_SIO1API
		case 0x1f801050:
			SIO1_writeData32(value);
			return;
#endif
#ifdef PSXHW_LOG
		case 0x1f801060:
			PSXHW_LOG("RAM size write %x\n", value);
			psxHu32ref(add) = SWAPu32(value);
			return; // Ram size
#endif

		case 0x1f801070: 
#ifdef PSXHW_LOG
			PSXHW_LOG("IREG 32bit write %x\n", value);
#endif
			if (Config.Sio) psxHu32ref(0x1070) |= SWAPu32(0x80);
			if (Config.SpuIrq) psxHu32ref(0x1070) |= SWAPu32(0x200);
			psxHu32ref(0x1070) &= SWAPu32((psxHu32(0x1074) & value));
			return;
		case 0x1f801074:
#ifdef PSXHW_LOG
			PSXHW_LOG("IMASK 32bit write %x\n", value);
#endif
			psxHu32ref(0x1074) = SWAPu32(value);
			if (psxHu32ref(0x1070) & value)
				new_dyna_set_event(PSXINT_NEWDRC_CHECK, 1);
			return;

#ifdef PSXHW_LOG
		case 0x1f801080:
			PSXHW_LOG("DMA0 MADR 32bit write %x\n", value);
			HW_DMA0_MADR = SWAPu32(value); return; // DMA0 madr
		case 0x1f801084:
			PSXHW_LOG("DMA0 BCR 32bit write %x\n", value);
			HW_DMA0_BCR  = SWAPu32(value); return; // DMA0 bcr
#endif
		case 0x1f801088:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA0 CHCR 32bit write %x\n", value);
#endif
			DmaExec(0);	                 // DMA0 chcr (MDEC in DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f801090:
			PSXHW_LOG("DMA1 MADR 32bit write %x\n", value);
			HW_DMA1_MADR = SWAPu32(value); return; // DMA1 madr
		case 0x1f801094:
			PSXHW_LOG("DMA1 BCR 32bit write %x\n", value);
			HW_DMA1_BCR  = SWAPu32(value); return; // DMA1 bcr
#endif
		case 0x1f801098:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA1 CHCR 32bit write %x\n", value);
#endif
			DmaExec(1);                  // DMA1 chcr (MDEC out DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010a0:
			PSXHW_LOG("DMA2 MADR 32bit write %x\n", value);
			HW_DMA2_MADR = SWAPu32(value); return; // DMA2 madr
		case 0x1f8010a4:
			PSXHW_LOG("DMA2 BCR 32bit write %x\n", value);
			HW_DMA2_BCR  = SWAPu32(value); return; // DMA2 bcr
#endif
		case 0x1f8010a8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA2 CHCR 32bit write %x\n", value);
#endif
			DmaExec(2);                  // DMA2 chcr (GPU DMA)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010b0:
			PSXHW_LOG("DMA3 MADR 32bit write %x\n", value);
			HW_DMA3_MADR = SWAPu32(value); return; // DMA3 madr
		case 0x1f8010b4:
			PSXHW_LOG("DMA3 BCR 32bit write %x\n", value);
			HW_DMA3_BCR  = SWAPu32(value); return; // DMA3 bcr
#endif
		case 0x1f8010b8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA3 CHCR 32bit write %x\n", value);
#endif
			DmaExec(3);                  // DMA3 chcr (CDROM DMA)
			
			return;

#ifdef PSXHW_LOG
		case 0x1f8010c0:
			PSXHW_LOG("DMA4 MADR 32bit write %x\n", value);
			HW_DMA4_MADR = SWAPu32(value); return; // DMA4 madr
		case 0x1f8010c4:
			PSXHW_LOG("DMA4 BCR 32bit write %x\n", value);
			HW_DMA4_BCR  = SWAPu32(value); return; // DMA4 bcr
#endif
		case 0x1f8010c8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA4 CHCR 32bit write %x\n", value);
#endif
			DmaExec(4);                  // DMA4 chcr (SPU DMA)
			return;

#if 0
		case 0x1f8010d0: break; //DMA5write_madr();
		case 0x1f8010d4: break; //DMA5write_bcr();
		case 0x1f8010d8: break; //DMA5write_chcr(); // Not needed
#endif

#ifdef PSXHW_LOG
		case 0x1f8010e0:
			PSXHW_LOG("DMA6 MADR 32bit write %x\n", value);
			HW_DMA6_MADR = SWAPu32(value); return; // DMA6 bcr
		case 0x1f8010e4:
			PSXHW_LOG("DMA6 BCR 32bit write %x\n", value);
			HW_DMA6_BCR  = SWAPu32(value); return; // DMA6 bcr
#endif
		case 0x1f8010e8:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA6 CHCR 32bit write %x\n", value);
#endif
			DmaExec(6);                   // DMA6 chcr (OT clear)
			return;

#ifdef PSXHW_LOG
		case 0x1f8010f0:
			PSXHW_LOG("DMA PCR 32bit write %x\n", value);
			HW_DMA_PCR = SWAPu32(value);
			return;
#endif

		case 0x1f8010f4:
#ifdef PSXHW_LOG
			PSXHW_LOG("DMA ICR 32bit write %x\n", value);
#endif
		{
			u32 tmp = value & 0x00ff803f;
			tmp |= (SWAPu32(HW_DMA_ICR) & ~value) & 0x7f000000;
			if ((tmp & HW_DMA_ICR_GLOBAL_ENABLE && tmp & 0x7f000000)
			    || tmp & HW_DMA_ICR_BUS_ERROR) {
				if (!(SWAPu32(HW_DMA_ICR) & HW_DMA_ICR_IRQ_SENT))
					psxHu32ref(0x1070) |= SWAP32(8);
				tmp |= HW_DMA_ICR_IRQ_SENT;
			}
			HW_DMA_ICR = SWAPu32(tmp);
			return;
		}

		case 0x1f801810:
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU DATA 32bit write %x\n", value);
#endif
			GPU_writeData(value); return;
		case 0x1f801814:
#ifdef PSXHW_LOG
			PSXHW_LOG("GPU STATUS 32bit write %x\n", value);
#endif
			GPU_writeStatus(value);
			gpuSyncPluginSR();
			return;

		case 0x1f801820:
			mdecWrite0(value); break;
		case 0x1f801824:
			mdecWrite1(value); break;

		case 0x1f801100:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(0, value & 0xffff); return;
		case 0x1f801104:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(0, value); return;
		case 0x1f801108:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(0, value & 0xffff); return; //  HW_DMA_ICR&= SWAP32((~value)&0xff000000);

		case 0x1f801110:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(1, value & 0xffff); return;
		case 0x1f801114:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(1, value); return;
		case 0x1f801118:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(1, value & 0xffff); return;

		case 0x1f801120:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 COUNT 32bit write %x\n", value);
#endif
			psxRcntWcount(2, value & 0xffff); return;
		case 0x1f801124:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 MODE 32bit write %x\n", value);
#endif
			psxRcntWmode(2, value); return;
		case 0x1f801128:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 TARGET 32bit write %x\n", value);
#endif
			psxRcntWtarget(2, value & 0xffff); return;

		default:
			// Dukes of Hazard 2 - car engine noise
			if (add>=0x1f801c00 && add<0x1f801e00) {
				SPU_writeRegister(add, value&0xffff);
				SPU_writeRegister(add + 2, value>>16);
				return;
			}

			psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
			PSXHW_LOG("*Unknown 32bit write at address %x value %x\n", add, value);
#endif
			return;
	}
Exemple #4
0
void psxHwWrite16(u32 add, u16 value) {
	switch (add) {
		case 0x1f801040:
			sioWrite8((unsigned char)value);
			sioWrite8((unsigned char)(value>>8));
#ifdef PAD_LOG
			PAD_LOG ("sio write16 %x, %x\n", add&0xf, value);
#endif
			return;
		case 0x1f801044:
			sioWriteStat16(value);
#ifdef PAD_LOG
			PAD_LOG ("sio write16 %x, %x\n", add&0xf, value);
#endif
			return;
		case 0x1f801048:
            sioWriteMode16(value);
#ifdef PAD_LOG
			PAD_LOG ("sio write16 %x, %x\n", add&0xf, value);
#endif
			return;
		case 0x1f80104a: // control register
			sioWriteCtrl16(value);
#ifdef PAD_LOG
			PAD_LOG ("sio write16 %x, %x\n", add&0xf, value);
#endif
			return;
		case 0x1f80104e: // baudrate register
            sioWriteBaud16(value);
#ifdef PAD_LOG
			PAD_LOG ("sio write16 %x, %x\n", add&0xf, value);
#endif
			return;
#ifdef ENABLE_SIO1API
		case 0x1f801050:
			SIO1_writeData16(value);
			return;
		case 0x1f801054:
			SIO1_writeStat16(value);
			return;
		case 0x1f80105a:
			SIO1_writeCtrl16(value);
			return;
		case 0x1f80105e:
			SIO1_writeBaud16(value);
			return;
#endif
		case 0x1f801070: 
#ifdef PSXHW_LOG
			PSXHW_LOG("IREG 16bit write %x\n", value);
#endif
			if (Config.Sio) psxHu16ref(0x1070) |= SWAPu16(0x80);
			if (Config.SpuIrq) psxHu16ref(0x1070) |= SWAPu16(0x200);
			psxHu16ref(0x1070) &= SWAPu16((psxHu16(0x1074) & value));
			return;

		case 0x1f801074:
#ifdef PSXHW_LOG
			PSXHW_LOG("IMASK 16bit write %x\n", value);
#endif
			psxHu16ref(0x1074) = SWAPu16(value);
			if (psxHu16ref(0x1070) & value)
				new_dyna_set_event(PSXINT_NEWDRC_CHECK, 1);
			return;

		case 0x1f801100:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 COUNT 16bit write %x\n", value);
#endif
			psxRcntWcount(0, value); return;
		case 0x1f801104:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 MODE 16bit write %x\n", value);
#endif
			psxRcntWmode(0, value); return;
		case 0x1f801108:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 0 TARGET 16bit write %x\n", value);
#endif
			psxRcntWtarget(0, value); return;

		case 0x1f801110:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 COUNT 16bit write %x\n", value);
#endif
			psxRcntWcount(1, value); return;
		case 0x1f801114:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 MODE 16bit write %x\n", value);
#endif
			psxRcntWmode(1, value); return;
		case 0x1f801118:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 1 TARGET 16bit write %x\n", value);
#endif
			psxRcntWtarget(1, value); return;

		case 0x1f801120:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 COUNT 16bit write %x\n", value);
#endif
			psxRcntWcount(2, value); return;
		case 0x1f801124:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 MODE 16bit write %x\n", value);
#endif
			psxRcntWmode(2, value); return;
		case 0x1f801128:
#ifdef PSXHW_LOG
			PSXHW_LOG("COUNTER 2 TARGET 16bit write %x\n", value);
#endif
			psxRcntWtarget(2, value); return;

		default:
			if (add>=0x1f801c00 && add<0x1f801e00) {
            	SPU_writeRegister(add, value);
				return;
			}

			psxHu16ref(add) = SWAPu16(value);
#ifdef PSXHW_LOG
			PSXHW_LOG("*Unknown 16bit write at address %x value %x\n", add, value);
#endif
			return;
	}
	psxHu16ref(add) = SWAPu16(value);
#ifdef PSXHW_LOG
	PSXHW_LOG("*Known 16bit write at address %x value %x\n", add, value);
#endif
}
Exemple #5
0
void psxHwWrite32(u32 add, u32 value) {
    switch (add) {
    case 0x1f801040:
        sioWrite8((unsigned char)value);
        sioWrite8((unsigned char)((value&0xff) >>  8));
        sioWrite8((unsigned char)((value&0xff) >> 16));
        sioWrite8((unsigned char)((value&0xff) >> 24));
#ifdef PAD_LOG
        PAD_LOG("sio write32 %x\n", value);
#endif
        return;
#ifdef ENABLE_SIO1API
    case 0x1f801050:
        SIO1_writeData32(value);
#ifdef SIO1_LOG
        SIO1_LOG("sio1 write32 %x\n", value);
#endif
        return;
#endif
#ifdef PSXHW_LOG
    case 0x1f801060:
        PSXHW_LOG("RAM size write %x\n", value);
        psxHu32ref(add) = SWAPu32(value);
        return; // Ram size
#endif

    case 0x1f801070:
#ifdef PSXHW_LOG
        PSXHW_LOG("IREG 32bit write %x\n", value);
#endif
        if (Config.SioIrq) psxHu32ref(0x1070) |= SWAPu32(0x80);
        if (Config.SpuIrq) psxHu32ref(0x1070) |= SWAPu32(0x200);
        psxHu32ref(0x1070) &= SWAPu32(value);
        return;
    case 0x1f801074:
#ifdef PSXHW_LOG
        PSXHW_LOG("IMASK 32bit write %x\n", value);
#endif
        psxHu32ref(0x1074) = SWAPu32(value);
        return;

#ifdef PSXHW_LOG
    case 0x1f801080:
        PSXHW_LOG("DMA0 MADR 32bit write %x\n", value);
        HW_DMA0_MADR = SWAPu32(value);
        return; // DMA0 madr
    case 0x1f801084:
        PSXHW_LOG("DMA0 BCR 32bit write %x\n", value);
        HW_DMA0_BCR  = SWAPu32(value);
        return; // DMA0 bcr
#endif
    case 0x1f801088:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA0 CHCR 32bit write %x\n", value);
#endif
        DmaExec(0);	                 // DMA0 chcr (MDEC in DMA)
        return;

#ifdef PSXHW_LOG
    case 0x1f801090:
        PSXHW_LOG("DMA1 MADR 32bit write %x\n", value);
        HW_DMA1_MADR = SWAPu32(value);
        return; // DMA1 madr
    case 0x1f801094:
        PSXHW_LOG("DMA1 BCR 32bit write %x\n", value);
        HW_DMA1_BCR  = SWAPu32(value);
        return; // DMA1 bcr
#endif
    case 0x1f801098:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA1 CHCR 32bit write %x\n", value);
#endif
        DmaExec(1);                  // DMA1 chcr (MDEC out DMA)
        return;

#ifdef PSXHW_LOG
    case 0x1f8010a0:
        PSXHW_LOG("DMA2 MADR 32bit write %x\n", value);
        HW_DMA2_MADR = SWAPu32(value);
        return; // DMA2 madr
    case 0x1f8010a4:
        PSXHW_LOG("DMA2 BCR 32bit write %x\n", value);
        HW_DMA2_BCR  = SWAPu32(value);
        return; // DMA2 bcr
#endif
    case 0x1f8010a8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA2 CHCR 32bit write %x\n", value);
#endif
        /* A hack that makes Vampire Hunter D title screen visible,
        /* but makes Tomb Raider II water effect to stay opaque
        /* Root cause for this problem is that when DMA2 is issued
        /* it is incompletele and still beign built by the game.
        /* Maybe it is ready when some signal comes in or within given delay?
        */
        if (dmaGpuListHackEn && value == 0x00000401 && HW_DMA2_BCR == 0x0) {
            psxDma2(SWAPu32(HW_DMA2_MADR), SWAPu32(HW_DMA2_BCR), SWAPu32(value));
            return;
        }
        DmaExec(2);                  // DMA2 chcr (GPU DMA)
        if (HW_DMA2_CHCR == 0x1000401)
            dmaGpuListHackEn=TRUE;
        return;

#ifdef PSXHW_LOG
    case 0x1f8010b0:
        PSXHW_LOG("DMA3 MADR 32bit write %x\n", value);
        HW_DMA3_MADR = SWAPu32(value);
        return; // DMA3 madr
    case 0x1f8010b4:
        PSXHW_LOG("DMA3 BCR 32bit write %x\n", value);
        HW_DMA3_BCR  = SWAPu32(value);
        return; // DMA3 bcr
#endif
    case 0x1f8010b8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA3 CHCR 32bit write %x\n", value);
#endif
        DmaExec(3);                  // DMA3 chcr (CDROM DMA)

        return;

#ifdef PSXHW_LOG
    case 0x1f8010c0:
        PSXHW_LOG("DMA4 MADR 32bit write %x\n", value);
        HW_DMA4_MADR = SWAPu32(value);
        return; // DMA4 madr
    case 0x1f8010c4:
        PSXHW_LOG("DMA4 BCR 32bit write %x\n", value);
        HW_DMA4_BCR  = SWAPu32(value);
        return; // DMA4 bcr
#endif
    case 0x1f8010c8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA4 CHCR 32bit write %x\n", value);
#endif
        DmaExec(4);                  // DMA4 chcr (SPU DMA)
        return;

#if 0
    case 0x1f8010d0:
        break; //DMA5write_madr();
    case 0x1f8010d4:
        break; //DMA5write_bcr();
    case 0x1f8010d8:
        break; //DMA5write_chcr(); // Not needed
#endif

#ifdef PSXHW_LOG
    case 0x1f8010e0:
        PSXHW_LOG("DMA6 MADR 32bit write %x\n", value);
        HW_DMA6_MADR = SWAPu32(value);
        return; // DMA6 bcr
    case 0x1f8010e4:
        PSXHW_LOG("DMA6 BCR 32bit write %x\n", value);
        HW_DMA6_BCR  = SWAPu32(value);
        return; // DMA6 bcr
#endif
    case 0x1f8010e8:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA6 CHCR 32bit write %x\n", value);
#endif
        DmaExec(6);                   // DMA6 chcr (OT clear)
        return;

#ifdef PSXHW_LOG
    case 0x1f8010f0:
        PSXHW_LOG("DMA PCR 32bit write %x\n", value);
        HW_DMA_PCR = SWAPu32(value);
        return;
#endif

    case 0x1f8010f4:
#ifdef PSXHW_LOG
        PSXHW_LOG("DMA ICR 32bit write %x\n", value);
#endif
        {
            u32 tmp = (~value) & SWAPu32(HW_DMA_ICR);
            HW_DMA_ICR = SWAPu32(((tmp ^ value) & 0xffffff) ^ tmp);
            return;
        }


    case 0x1f801014:
#ifdef PSXHW_LOG
        PSXHW_LOG("SPU delay [0x1014] write32: %8.8lx\n", value);
#endif
        psxHu32ref(add) = SWAPu32(value);
        return;
    case 0x1f801810:
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU DATA 32bit write %x\n", value);
#endif
        GPU_writeData(value);
        return;
    case 0x1f801814:
#ifdef PSXHW_LOG
        PSXHW_LOG("GPU STATUS 32bit write %x\n", value);
#endif
        if (value & 0x8000000)
            dmaGpuListHackEn=FALSE;
        GPU_writeStatus(value);
        return;

    case 0x1f801820:
        mdecWrite0(value);
        break;
    case 0x1f801824:
        mdecWrite1(value);
        break;

    case 0x1f801100:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(0, value & 0xffff);
        return;
    case 0x1f801104:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(0, value);
        return;
    case 0x1f801108:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 0 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(0, value & 0xffff);
        return; //  HW_DMA_ICR&= SWAP32((~value)&0xff000000);

    case 0x1f801110:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(1, value & 0xffff);
        return;
    case 0x1f801114:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(1, value);
        return;
    case 0x1f801118:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 1 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(1, value & 0xffff);
        return;

    case 0x1f801120:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 COUNT 32bit write %x\n", value);
#endif
        psxRcntWcount(2, value & 0xffff);
        return;
    case 0x1f801124:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 MODE 32bit write %x\n", value);
#endif
        psxRcntWmode(2, value);
        return;
    case 0x1f801128:
#ifdef PSXHW_LOG
        PSXHW_LOG("COUNTER 2 TARGET 32bit write %x\n", value);
#endif
        psxRcntWtarget(2, value & 0xffff);
        return;

    default:
        // Dukes of Hazard 2 - car engine noise
        if (add>=0x1f801c00 && add<0x1f801e00) {
            SPU_writeRegister(add, value&0xffff);
            add += 2;
            value >>= 16;

            if (add>=0x1f801c00 && add<0x1f801e00)
                SPU_writeRegister(add, value&0xffff);
            return;
        }


        psxHu32ref(add) = SWAPu32(value);
#ifdef PSXHW_LOG
        PSXHW_LOG("*Unknown 32bit write at address %x value %x\n", add, value);
#endif
        return;
    }
Exemple #6
0
static void io_write_sio16(u32 value)
{
	sioWrite8((unsigned char)value);
	sioWrite8((unsigned char)(value>>8));
}