void GDIPlus::DrawFilledRect( Gwen::Rect rect )
{
Translate( rect );
Gdiplus::SolidBrush solidBrush( m_Colour );
graphics->FillRectangle( &solidBrush, rect.x, rect.y, rect.w, rect.h );
}
void CCheckButton::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth * 6, nHeight);
Graphics graphics(m_memDC);
CRect rcTemp(0, 0, nWidth, nHeight);
for(int i = 0; i < 6; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
graphics.DrawImage(m_pImage, Rect(rcTemp.left, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
i * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
rcTemp.OffsetRect(nWidth, 0);
}
if(!m_strTitle.IsEmpty())
{
m_memDC.SetBkMode(TRANSPARENT);
rcTemp.SetRect(0, 0, nWidth, nHeight);
FontFamily fontFamily(m_strFont.AllocSysString());
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentNear);
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
Size size = GetTextBounds(font, strFormat, m_strTitle);
CPoint point = GetOriginPoint(nWidth - m_sizeImage.cx - 3, nHeight, size.Width, size.Height, m_uAlignment, m_uVAlignment);
for(int i = 0; i < 6; i++)
{
SolidBrush solidBrush(enBSDisable == i ? Color(128, 128, 128) : m_clrText);
RectF rect(m_sizeImage.cx + 3 + point.x + i * nWidth, point.y, nWidth - m_sizeImage.cx - 3 - point.x, size.Height);
graphics.DrawString(m_strTitle.AllocSysString(), (INT)wcslen(m_strTitle.AllocSysString()), &font,
rect, &strFormat, &solidBrush);
// 画焦点框(虚线框)
if(m_bIsFocus)
{
Pen pen(Color(128, 128, 128), 1);
pen.SetDashStyle(DashStyleDot);
RectF rectFocus(point.x + i * nWidth, point.y, m_sizeImage.cx + 6 + size.Width, size.Height);
graphics.DrawRectangle(&pen, rectFocus);
}
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_enButtonState * nWidth, 0, SRCCOPY);
}
void Label::onDraw(Gdiplus::Graphics& g, int x, int y)
{
Gdiplus::FontFamily fontFamily(fontFamily_.c_str());
Gdiplus::Font font(&fontFamily, fontSize_, Gdiplus::FontStyleRegular, Gdiplus::UnitPixel);
Gdiplus::PointF pointF(float(x+x_), float(y+y_));
Gdiplus::SolidBrush solidBrush(fontColor_);
g.DrawString(text_.c_str(), text_.length(), &font, pointF, &solidBrush);
}
void CHideButton::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth * 5, nHeight);
for(int i = 0; i < 4; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
}
Color clrText[4] = {m_clrTextNormal, m_clrTextHover, m_clrTextDown, m_clrTextDisable};
Graphics graphics(m_memDC);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
::SysFreeString(bsFont);
// 设置水平和垂直对齐方式
DUI_STRING_ALIGN_DEFINE();
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
Size sizeTip = GetTextBounds(font, strFormat, m_strTip);
Size sizeText = GetTextBounds(font, strFormat, m_strTitle);
m_rcText.SetRect(m_rc.left + sizeTip.Width + 10, m_rc.top, m_rc.left + sizeTip.Width + 10 + sizeText.Width, m_rc.top + sizeText.Height);
SolidBrush solidBrushTip(m_clrTip);
for(int i = 0; i < 4; i++)
{
RectF rect((Gdiplus::REAL)(i * nWidth), (Gdiplus::REAL)0, (Gdiplus::REAL)(sizeTip.Width + 10), (Gdiplus::REAL)sizeTip.Height);
BSTR bsTip = m_strTip.AllocSysString();
graphics.DrawString(bsTip, (INT)wcslen(bsTip), &font, rect, &strFormat, &solidBrushTip);
::SysFreeString(bsTip);
if(i > 0)
{
SolidBrush solidBrush(clrText[i - 1]);
RectF rect((Gdiplus::REAL)(sizeTip.Width + 10 + i * nWidth), (Gdiplus::REAL)0, (Gdiplus::REAL)(nWidth - (sizeTip.Width + 10)), (Gdiplus::REAL)sizeText.Height);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_bShowButton ? (1 + m_enButtonState) * nWidth : 0, 0, SRCCOPY);
}
// 表格绘制.
void DataGrids::DrawGrids(HDC _hdc)
{
// 绘制x/y的箭头.
WideString xStr = "电压(V)";
WideString yStr = "时间(S)";
m_stGrp = new Gdiplus::Graphics(_hdc);
m_stGrp->SetSmoothingMode(Gdiplus::SmoothingModeHighQuality);
/*FontFamily fontFamily(L"楷体_GB2312");
Font font(&fontFamily, 30, FontStyleRegular, UnitPixel);
*/
Gdiplus::SolidBrush solidBrush(Gdiplus::Color(255, 0, 0, 255));
Gdiplus::Pen p(Gdiplus::Color(255, 0, 0, 0),1);
Gdiplus::AdjustableArrowCap cap(8,4,true);
Gdiplus::Font font(L"楷体",12);
Gdiplus::SolidBrush s( Gdiplus::Color(255, 0, 0, 0));
#define X(_x) UserX((_x)+xAxisOffset)
#define Y(_y) UserY((_y)+yAxisOffset)
// 刻度线.Y轴.
p.SetColor(Gdiplus::Color(255, 0, 0, 255));
for(int i = 0; i * yMarkSpace < m_iHeight-yMarkSpace-8;i++)
{
m_stGrp->DrawLine(&p,X(0),Y(0+i*yMarkSpace),X(yMarkHeight+(((i%5)==0)?yMarkHeight:0)),Y(0+i*yMarkSpace));
}
for(int i = 0; i * yMarkSpace < m_iWidth-xMarkSpace-8;i++)
{
m_stGrp->DrawLine(&p,X(i*xMarkSpace),Y(0),X(i*xMarkSpace),Y(xMarkHeight+((i%5)==0?xMarkHeight:0)));
}
p.SetColor(Gdiplus::Color(255, 0, 0, 0));
// Draw X,Y axises.
p.SetCustomEndCap(&cap);
m_stGrp->DrawLine(&p,X(0),Y(0),X(0),Y(m_iHeight)); // Draw Y axis
m_stGrp->DrawLine(&p,X(0),Y(0),X(m_iWidth),Y(0)); // Draw X axis
m_stGrp->DrawString(xStr.c_bstr(),xStr.Length(),&font,Gdiplus::PointF(30,10),&s);
m_stGrp->DrawString(yStr.c_bstr(),yStr.Length(),&font,Gdiplus::PointF(m_iWidth-80,m_iHeight-50),&s);
#undef X(_x)
#undef Y(_y)
DrawCurve();
delete m_stGrp;
}
void GDIPlus::RenderText( gwen::Font* pFont, gwen::Point pos, const gwen::UnicodeString & text )
{
Translate( pos.x, pos.y );
// If the font doesn't exist, or the font size should be changed
if ( !pFont->data || fabs( pFont->realsize - pFont->size * Scale() ) > 2 )
{
FreeFont( pFont );
LoadFont( pFont );
}
Gdiplus::StringFormat strFormat( Gdiplus::StringFormat::GenericDefault() );
Gdiplus::SolidBrush solidBrush( m_Colour );
Gdiplus::RectF r( pos.x, pos.y, 1000, 1000 );
Gdiplus::Font* pGDIFont = ( Gdiplus::Font* ) pFont->data;
graphics->DrawString( text.c_str(), text.length() + 1, pGDIFont, r, &strFormat, &solidBrush );
}
void CLinkButton::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth * 4, nHeight);
for(int i = 0; i < 4; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
}
Color clrText[4] = {m_clrTextNormal, m_clrTextHover, m_clrTextDown, m_clrTextDisable};
Graphics graphics(m_memDC);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
::SysFreeString(bsFont);
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentNear);
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
Size sizeText = GetTextBounds(font, strFormat, m_strTitle);
CPoint point = GetOriginPoint(nWidth, nHeight, sizeText.Width, sizeText.Height,
GetGDIAlignment(m_uAlignment), GetGDIVAlignment(m_uVAlignment));
m_rcText.SetRect(m_rc.left, m_rc.top + point.y, m_rc.left + sizeText.Width, m_rc.top + point.y + sizeText.Height);
for(int i = 0; i < 4; i++)
{
SolidBrush solidBrush(clrText[i]);
RectF rect((Gdiplus::REAL)(i * nWidth), (Gdiplus::REAL)point.y, (Gdiplus::REAL)nWidth, (Gdiplus::REAL)sizeText.Height);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_enButtonState * nWidth, 0, SRCCOPY);
}
BOOL GDIPluseExt::DrawRoundRect(Graphics& gp,CRect rect,Color boardscolor,Color FillPathcolor,int radius)
{
//边框路径
GraphicsPath Path;
MakeRoundRectPath(&Path,rect,radius);
SolidBrush solidBrush(FillPathcolor);
gp.SetSmoothingMode(SmoothingModeAntiAlias);
gp.SetInterpolationMode(InterpolationModeHighQualityBicubic);
gp.FillPath(&solidBrush, &Path);
//画边框
for(int i=1; i < 4; ++i)
{
Pen pen(boardscolor, (REAL)i);
pen.SetLineJoin(LineJoinRound);
gp.DrawPath(&pen, &Path);
}
return TRUE;
}
void CTextButton::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth * 4, nHeight);
for(int i = 0; i < 4; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
}
Color clrText[4] = {m_clrTextNormal, m_clrTextHover, m_clrTextDown, m_clrTextDisable};
Graphics graphics(m_memDC);
FontFamily fontFamily(m_strFont.AllocSysString());
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 设置水平和垂直对齐方式
DUI_STRING_ALIGN_DEFINE();
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
Size size = GetTextBounds(font, strFormat, m_strTitle);
CPoint point = GetOriginPoint(nWidth, nHeight, size.Width, size.Height, m_uAlignment, m_uVAlignment);
for(int i = 0; i < 4; i++)
{
SolidBrush solidBrush(clrText[i]);
RectF rect(point.x + i * nWidth, point.y, nWidth - point.x, size.Height);
graphics.DrawString(m_strTitle.AllocSysString(), (INT)wcslen(m_strTitle.AllocSysString()), &font,
rect, &strFormat, &solidBrush);
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_enButtonState * nWidth, 0, SRCCOPY);
}
void CHSBWindow::OnPaint(HDC hdc)
{
Graphics g(hdc);
SolidBrush backBrush(0xFFFFFFFF);
g.FillRectangle(&backBrush, 0, 0, SELECT_WIDTH, SELECT_HEIGHT);
for(int i = 0; i < m_ControlCount; i++)
{
m_Controls[i]->Paint(&g);
}
Gdiplus::Pen grayPen1(0xFFB0B0B0, 1);
Gdiplus::Pen grayPen2(0xFFE7EAEA, 1);
g.DrawLine(&grayPen1, 2, 27 * 5 + 8, 102, 27 * 5 + 8);
g.DrawLine(&grayPen2, 3, 27 * 5 + 9, 102, 27 * 5 + 9);
SolidBrush solidBrush(0xFF000000);
StringFormat stringFormat;
stringFormat.SetAlignment(StringAlignmentCenter);
g.DrawString(L"Recent", -1, g_pFont, RectF(2, 27 * 5 + 2, 100, 24), &stringFormat, &solidBrush);
g.DrawLine(&grayPen1, 105, 2, 105, SELECT_HEIGHT - 5);
g.DrawLine(&grayPen2, 106, 3, 106, SELECT_HEIGHT - 4);
}
// 画控件
void CMenuItem::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
int nImageCount = m_bSelect ? 6 : 4;
if(m_bIsSeparator)
{
nImageCount = 1;
}
UpdateMemDC(dc, nWidth * nImageCount, nHeight);
// 刷新图片的大小(因为m_bSelect选项有可能在SetBitmap之后有变化)
if(m_pImage != NULL)
{
if(m_bIsPopup && (m_pImagePopupArrow == NULL))
{
// 弹出菜单的箭头,固定是两个小图片
m_sizeImage.SetSize(m_pImage->GetWidth() / 2, m_pImage->GetHeight());
}else
if(m_bIsSeparator)
{
// 分隔线,只有一个图片
m_sizeImage.SetSize(m_pImage->GetWidth(), m_pImage->GetHeight());
}else
if(m_bSelect)
{
// checkbox或radiobutton,固定为6个小图片
m_sizeImage.SetSize(m_pImage->GetWidth() / 6, m_pImage->GetHeight());
}else
{
// 按照设置的小图片个数计算
m_sizeImage.SetSize(m_pImage->GetWidth() / m_nImagePicCount, m_pImage->GetHeight());
}
}
Graphics graphics(m_memDC);
CRect rcTemp(0, 0, nWidth, nHeight);
for(int i = 0; i < nImageCount; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
if(enBSHover == i || (enBSDown == i && !m_bSelect) || enBSHoverDown == i)
{
// 画菜单项背景
if(m_pImageHover != NULL)
{
// 使用拉伸模式属性画图
graphics.DrawImage(m_pImageHover, RectF((Gdiplus::REAL)(i * nWidth+m_nFrameWidth), 0, (Gdiplus::REAL)(nWidth-m_nFrameWidth*2), (Gdiplus::REAL)nHeight),
0, 0, (Gdiplus::REAL)m_sizeHover.cx, (Gdiplus::REAL)m_sizeHover.cy, UnitPixel);
}else
{
// 使用颜色填充
SolidBrush brush(m_clrHover);//Color(254, 71, 156, 235));
graphics.FillRectangle(&brush, i * nWidth+m_nFrameWidth, 0, nWidth-m_nFrameWidth*2, nHeight);
}
}
// 画菜单项图片
if(m_pImage != NULL)
{
if(m_bIsSeparator)
{
// 如果是分隔线,则采用平铺方式画图
TextureBrush tileBrush(m_pImage, WrapModeTile);
graphics.FillRectangle(&tileBrush, RectF((Gdiplus::REAL)rcTemp.left, (Gdiplus::REAL)(rcTemp.top + (nHeight - m_sizeImage.cy) / 2), (Gdiplus::REAL)(nWidth-m_nFrameWidth*2), (Gdiplus::REAL)m_sizeImage.cy));
}else
if(m_bIsPopup && (m_pImagePopupArrow == NULL))
{
// 如果是弹出菜单,并且没有设置菜单的箭头图片,则用菜单图片作为右侧的箭头图片
graphics.DrawImage(m_pImage, Rect(rcTemp.right - m_sizeImage.cx - 6, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
(i % 2) * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
}else
if(m_bSelect)
{
// checkbox或radiobutton
graphics.DrawImage(m_pImage, Rect(rcTemp.left + (m_nLeft - m_sizeImage.cx) / 2, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
i * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
}else
{
// 普通菜单项的图片,如果小图片个数不足,则使用第一个小图片
graphics.DrawImage(m_pImage, Rect(rcTemp.left + (m_nLeft - m_sizeImage.cx) / 2, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
((m_nImagePicCount-1 < i) ? 0 : i) * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
}
}
// 如果是弹出菜单,并且设置了菜单的箭头图片,则画右侧的箭头图片
if(m_bIsPopup && (m_pImagePopupArrow != NULL))
{
graphics.DrawImage(m_pImagePopupArrow, Rect(rcTemp.right - m_sizePopupArrow.cx - 6, rcTemp.top + (nHeight - m_sizePopupArrow.cy) / 2, m_sizePopupArrow.cx, m_sizePopupArrow.cy),
(i % 2) * m_sizePopupArrow.cx, 0, m_sizePopupArrow.cx, m_sizePopupArrow.cy, UnitPixel);
}
rcTemp.OffsetRect(nWidth, 0);
}
// 画菜单项文字
if(!m_strTitle.IsEmpty())
{
m_memDC.SetBkMode(TRANSPARENT);
rcTemp.SetRect(0, 0, nWidth, nHeight);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
::SysFreeString(bsFont);
// 设置菜单文字的水平和垂直对齐方式,默认是水平方向左对齐,垂直方向中间对齐
DUI_STRING_ALIGN_DEFINE();
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
for(int i = 0; i < nImageCount; i++)
{
SolidBrush solidBrush(enBSDisable == i ? Color(254, 128, 128, 128) : (enBSHover == i || (enBSDown == i && !m_bSelect) || enBSHoverDown == i ? Color(254, 255, 255, 255) : Color(254, 56, 56, 56)));
RectF rect((Gdiplus::REAL)(m_nLeft + i * nWidth), (Gdiplus::REAL)0, (Gdiplus::REAL)(nWidth - m_nLeft), (Gdiplus::REAL)nHeight);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_enButtonState * nWidth, 0, SRCCOPY);
}
void CDuiTabCtrl::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth, nHeight * 3);
Graphics graphics(m_memDC);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
::SysFreeString(bsFont);
SolidBrush solidBrush(m_clrText); // 正常文字画刷
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 文字的对齐方式
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentCenter); // 水平方向中间对齐
strFormat.SetLineAlignment(StringAlignmentCenter); // 垂直方向中间对齐
//strFormat.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
for(int i = 0; i < 3; i++)
{
m_memDC.BitBlt(0, i * nHeight, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
int nXPos = 0;
int nYPos = i * nHeight;
for(size_t j = 0; j < m_vecItemInfo.size(); j++)
{
TabItemInfo &itemInfo = m_vecItemInfo.at(j);
if(!itemInfo.bVisible)
{
continue;
}
if(itemInfo.pImage != NULL) // 使用tab页指定的图片
{
int nImageIndex = i;
if(itemInfo.nImageCount == 1)
{
nImageIndex = 0;
}
int nX = (itemInfo.rc.Width() - itemInfo.sizeImage.cx) / 2;
graphics.DrawImage(itemInfo.pImage, Rect(nXPos + nX, nYPos, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy),
itemInfo.sizeImage.cx * nImageIndex, 0, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy, UnitPixel);
}else
if((m_pImage != NULL) && (itemInfo.nImageIndex != -1)) // 使用tabctrl的索引图片
{
// 画底图
int nX = (itemInfo.rc.Width() - itemInfo.sizeImage.cx) / 2;
graphics.DrawImage(m_pImage, Rect(nXPos + nX, nYPos, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy),
itemInfo.sizeImage.cx * itemInfo.nImageIndex, 0, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy, UnitPixel);
}
// 画热点图(如果存在tabctrl设置的热点图的话)
if((m_pImageHover != NULL) && (i > 0))
{
int nX = (itemInfo.rc.Width() - m_sizeHover.cx) / 2;
if(nX < 0)
{
nX = 0;
}
graphics.DrawImage(m_pImageHover, Rect(nXPos + nX, nYPos, m_sizeHover.cx, m_sizeHover.cy),
m_sizeHover.cx * (i-1), 0, m_sizeHover.cx, m_sizeHover.cy, UnitPixel);
}
// 文字
if(!itemInfo.strText.IsEmpty())
{
RectF rectText((Gdiplus::REAL)nXPos, (Gdiplus::REAL)(nYPos + itemInfo.sizeImage.cy + 1), (Gdiplus::REAL)itemInfo.rc.Width(),(Gdiplus::REAL)(m_nTabCtrlHeight - itemInfo.sizeImage.cy - 1));
if(m_nTabCtrlHeight <= itemInfo.sizeImage.cy)
{
// 如果tabctrl高度小于图片高度,则文字直接居中显示
rectText.Y = (Gdiplus::REAL)nYPos;
rectText.Height = (Gdiplus::REAL)m_nTabCtrlHeight;
}
BSTR bsText = itemInfo.strText.AllocSysString();
graphics.DrawString(bsText, (INT)wcslen(bsText), &font, rectText, &strFormat, &solidBrush);
::SysFreeString(bsText);
}
nXPos += itemInfo.rc.Width();
// 画分隔图片(采用拉伸方式)
if(j < m_vecItemInfo.size() - 1 && m_pImageSeperator != NULL)
{
CRect &rc = m_vecRcSeperator.at(j);
int nSepHeight = itemInfo.rc.Height(); // m_sizeSeperator.cy
graphics.DrawImage(m_pImageSeperator, Rect(nXPos, nYPos, m_sizeSeperator.cx, nSepHeight),
0, 0, m_sizeSeperator.cx, m_sizeSeperator.cy, UnitPixel);
nXPos += m_sizeSeperator.cx;
}
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, 0, 0, SRCCOPY);
if((m_nHoverItem != -1) && (m_nHoverItem < (int)m_vecItemInfo.size()))
{
TabItemInfo &itemInfo = m_vecItemInfo.at(m_nHoverItem);
dc.BitBlt(itemInfo.rc.left,itemInfo.rc.top, itemInfo.rc.Width(), itemInfo.rc.Height(), &m_memDC, itemInfo.rc.left - m_rc.left,itemInfo.rc.top - m_rc.top + m_rc.Height(), SRCCOPY);
}
if((m_nDownItem != -1) && (m_nDownItem < (int)m_vecItemInfo.size()))
{
TabItemInfo &itemInfo = m_vecItemInfo.at(m_nDownItem);
dc.BitBlt(itemInfo.rc.left,itemInfo.rc.top, itemInfo.rc.Width(), itemInfo.rc.Height(), &m_memDC, itemInfo.rc.left - m_rc.left,itemInfo.rc.top - m_rc.top + m_rc.Height() * 2, SRCCOPY);
}
}
void CDuiGridCtrl::DrawControl(CDC &dc, CRect rcUpdate)
{
// 列表画图方法:
// 1.列表的虚拟高度为每一行高度*行数
// 2.列表显示的top坐标由scroll控件记录
// 3.重画时候,根据top坐标位置计算出显示的第一行的序号,根据显示高度计算出显示的最后一行的序号
// 4.根据计算出的显示的行,画相应的内容到内存dc中
// 5.计算出显示的top坐标进行内存dc的拷贝
int nTotalColumnWidth = GetTotalColumnWidth(); // 总的列宽度
int nViewWidth = m_rc.Width() - m_nScrollWidth; // 减去滚动条的显示区域宽度
CDuiScrollHorizontal* pScrollH = (CDuiScrollHorizontal*)m_pControScrollH;
int nCurPosH = pScrollH->GetScrollCurrentPos(); // 当前left位置
int nMaxRangeH = pScrollH->GetScrollMaxRange();
int nContentWidth = (nTotalColumnWidth > nViewWidth) ? nTotalColumnWidth : nViewWidth; // 内容部分的宽度(如果总的列宽小于显示区域宽度,则使用显示区域宽度)
m_nVirtualLeft = (nMaxRangeH > 0) ? (int)((double)nCurPosH*(nContentWidth-nViewWidth)/nMaxRangeH) : 0; // 当前滚动条位置对应的虚拟的left位置
int nHeightAll = m_vecRowInfo.size()*m_nRowHeight; // 总的虚拟高度 //m_rc.Height();
CDuiScrollVertical* pScrollV = (CDuiScrollVertical*)m_pControScrollV;
int nCurPosV = pScrollV->GetScrollCurrentPos(); // 当前top位置
int nMaxRangeV = pScrollV->GetScrollMaxRange();
m_nVirtualTop = (nMaxRangeV > 0) ? (int)((double)nCurPosV*(nHeightAll-m_rc.Height())/nMaxRangeV) : 0; // 当前滚动条位置对应的虚拟的top位置
if(m_nVirtualTop < 0)
{
m_nVirtualTop = 0;
pScrollV->SetScrollCurrentPos(0);
}
m_nFirstViewRow = m_nVirtualTop / m_nRowHeight; // 显示的第一行序号
m_nLastViewRow = (m_nVirtualTop + m_rc.Height() - m_nHeaderHeight) / m_nRowHeight; // 显示的最后一行序号
if(m_nLastViewRow >= (int)m_vecRowInfo.size())
{
m_nLastViewRow = m_vecRowInfo.size() - 1;
}
if(m_nLastViewRow < 0)
{
m_nLastViewRow = 0;
}
int nHeightView = (m_nLastViewRow - m_nFirstViewRow +1) * m_nRowHeight; // 显示涉及到的虚拟高度
int nYViewPos = m_nVirtualTop - (m_nFirstViewRow * m_nRowHeight); // 内存dc显示到屏幕时候的top位置
if(nYViewPos < 0)
{
nYViewPos = 0;
}
if(!m_bUpdate)
{
UpdateMemDC(dc, nTotalColumnWidth, nHeightView);
Graphics graphics(m_memDC);
m_memDC.BitBlt(m_nVirtualLeft, 0, nViewWidth, nHeightView, &dc, m_rc.left, m_rc.top, WHITENESS); // 画白色背景
DrawVerticalTransition(m_memDC, dc, CRect(m_nVirtualLeft, nYViewPos, nViewWidth+m_nVirtualLeft, m_rc.Height()+nYViewPos-m_nHeaderHeight), // 背景透明度
m_rc, m_nBkTransparent, m_nBkTransparent);
BSTR bsFontTitle = m_strFontTitle.AllocSysString();
FontFamily fontFamilyTitle(bsFontTitle);
Font fontTitle(&fontFamilyTitle, (REAL)m_nFontTitleWidth, m_fontTitleStyle, UnitPixel);
::SysFreeString(bsFontTitle);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
::SysFreeString(bsFont);
SolidBrush solidBrush(m_clrText); // 正常文字画刷
SolidBrush solidBrushH(m_clrTextHover); // 热点文字画刷
SolidBrush solidBrushD(m_clrTextDown); // 当前行画刷
SolidBrush solidBrushT(m_clrTitle); // 标题文字画刷
SolidBrush solidBrushS(m_clrSeperator); // 分割线画刷
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 设置普通文字的水平和垂直对齐方式
DUI_STRING_ALIGN_DEFINE();
strFormat.SetTrimming(StringTrimmingEllipsisWord); // 以单词为单位去尾,略去部分使用省略号
//strFormat.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
if(!m_bTextWrap)
{
strFormat.SetFormatFlags(StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces); // 不换行
}
// 标题字段采用中间对齐
StringFormat strFormatHeader;
strFormatHeader.SetAlignment(StringAlignmentCenter); // 中间对齐
strFormatHeader.SetLineAlignment(StringAlignmentCenter); // 中间对齐
if(!m_bTextWrap)
{
strFormatHeader.SetFormatFlags(StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces); // 不换行
}
// 画标题行
if((m_nHeaderHeight > 0) && (m_vecColumnInfo.size() > 0))
{
// 画单元格内容
int nPosItemX = 0;
for(size_t j = 0; j < m_vecColumnInfo.size(); j++)
{
GridColumnInfo &columnInfo = m_vecColumnInfo.at(j);
int nWidth = columnInfo.nWidth;
if(j == 0)
{
nWidth += m_nLeftPos;
}
RectF rect((Gdiplus::REAL)nPosItemX, 0, (Gdiplus::REAL)nWidth, (Gdiplus::REAL)(m_nHeaderHeight-1));
// 画列标题
CString strTitle = columnInfo.strTitle;
BSTR bsTitle = strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormatHeader, &solidBrushT);
::SysFreeString(bsTitle);
nPosItemX += nWidth;
}
}
if(m_vecRowInfo.size() > 0)
{
for(int i = m_nFirstViewRow; i <= m_nLastViewRow && i < (int)m_vecRowInfo.size(); i++)
{
GridRowInfo &rowInfo = m_vecRowInfo.at(i);
SolidBrush solidBrushRow(rowInfo.clrText); // 行定义的颜色
int nXPos = 0;
int nVI = i - m_nFirstViewRow;
// 鼠标移动到行时候显示的背景颜色(如果设置为全0,则不显示行背景颜色)
if((m_nHoverRow == i) && (m_clrRowHover.GetValue() != Color(0, 0, 0, 0).GetValue()))
{
SolidBrush brush(m_clrRowHover);
graphics.FillRectangle(&brush, 0, m_nHeaderHeight + nVI*m_nRowHeight, nContentWidth, m_nRowHeight);
}
// 画检查框
int nCheckImgY = 3;
if((m_sizeCheckBox.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nCheckImgY = (m_nRowHeight - m_sizeCheckBox.cy) / 2 + 1;
}
if((rowInfo.nCheck != -1) && (m_pImageCheckBox != NULL))
{
int nCheckImageIndex = ((m_nHoverRow == i) ? ((rowInfo.nCheck==1) ? 4 : 1) : ((rowInfo.nCheck==1) ? 2 : 0));
graphics.DrawImage(m_pImageCheckBox, Rect(nXPos, m_nHeaderHeight + nVI*m_nRowHeight + nCheckImgY, m_sizeCheckBox.cx, m_sizeCheckBox.cy),
nCheckImageIndex * m_sizeCheckBox.cx, 0, m_sizeCheckBox.cx, m_sizeCheckBox.cy, UnitPixel);
rowInfo.rcCheck.SetRect(nXPos, i*m_nRowHeight + nCheckImgY, nXPos + m_sizeCheckBox.cx, i*m_nRowHeight + nCheckImgY + m_sizeCheckBox.cy);
nXPos += (m_sizeCheckBox.cx + 3);
}
// 画行左边图片
int nImgY = 3;
if(rowInfo.pImage != NULL)
{
if((rowInfo.sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - rowInfo.sizeImage.cy) / 2 + 1;
}
// 使用行数据指定的图片
graphics.DrawImage(rowInfo.pImage, Rect(nXPos, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, rowInfo.sizeImage.cx, rowInfo.sizeImage.cy),
0, 0, rowInfo.sizeImage.cx, rowInfo.sizeImage.cy, UnitPixel);
nXPos += (rowInfo.sizeImage.cx + 3);
}else
if((rowInfo.nImageIndex != -1) && (m_pImage != NULL))
{
if((m_sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - m_sizeImage.cy) / 2 + 1;
}
// 使用索引图片
graphics.DrawImage(m_pImage, Rect(nXPos, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, m_sizeImage.cx, m_sizeImage.cy),
rowInfo.nImageIndex*m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nXPos += (m_sizeImage.cx + 3);
}
// 画行右边图片
int nRightImageWidth = 0;
nImgY = 3;
if(rowInfo.pRightImage != NULL)
{
if((rowInfo.sizeRightImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - rowInfo.sizeRightImage.cy) / 2 + 1;
}
// 使用行数据指定的图片
graphics.DrawImage(rowInfo.pRightImage, Rect(nContentWidth-rowInfo.sizeRightImage.cx-1, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, rowInfo.sizeRightImage.cx, rowInfo.sizeRightImage.cy),
0, 0, rowInfo.sizeRightImage.cx, rowInfo.sizeRightImage.cy, UnitPixel);
nRightImageWidth = rowInfo.sizeRightImage.cx + 1;
}else
if((rowInfo.nRightImageIndex != -1) && (m_pImage != NULL))
{
if((m_sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - m_sizeImage.cy) / 2 + 1;
}
// 使用索引图片
graphics.DrawImage(m_pImage, Rect(nContentWidth-m_sizeImage.cx-1, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, m_sizeImage.cx, m_sizeImage.cy),
rowInfo.nRightImageIndex*m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nRightImageWidth = m_sizeImage.cx + 1;
}
// 画单元格内容
int nPosItemX = (m_nLeftPos != 0) ? m_nLeftPos : nXPos;
for(size_t j = 0; j < rowInfo.vecItemInfo.size(); j++)
{
GridColumnInfo &columnInfo = m_vecColumnInfo.at(j);
GridItemInfo &itemInfo = rowInfo.vecItemInfo.at(j);
BOOL bSingleLine = (itemInfo.strContent.IsEmpty() || !itemInfo.strLink.IsEmpty());
RectF rect((Gdiplus::REAL)nPosItemX,
(Gdiplus::REAL)(m_nHeaderHeight + nVI*m_nRowHeight + 1),
(Gdiplus::REAL)((j == 0) ? (itemInfo.rcItem.Width() - nPosItemX): itemInfo.rcItem.Width()),
(Gdiplus::REAL)(bSingleLine ? (m_nRowHeight - 2) : (m_nRowHeight / 2 - 2)));
if((int)(rect.GetRight()) > nContentWidth)
{
// 最后一列需要减去滚动条宽度
rect.Width -= m_nScrollWidth;
}
// 画单元格图片
int nItemImageX = 0;
int nImgY = 3;
if(itemInfo.pImage != NULL)
{
if((itemInfo.sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - rowInfo.sizeImage.cy) / 2 + 1;
}
// 使用单元格指定的图片
graphics.DrawImage(itemInfo.pImage, Rect(nPosItemX+nItemImageX, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy),
0, 0, itemInfo.sizeImage.cx, itemInfo.sizeImage.cy, UnitPixel);
nItemImageX += (itemInfo.sizeImage.cx + 3);
}else
if((itemInfo.nImageIndex != -1) && (m_pImage != NULL))
{
if((m_sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - m_sizeImage.cy) / 2 + 1;
}
// 使用索引图片
graphics.DrawImage(m_pImage, Rect(nPosItemX+nItemImageX, m_nHeaderHeight + nVI*m_nRowHeight + nImgY, m_sizeImage.cx, m_sizeImage.cy),
itemInfo.nImageIndex*m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nItemImageX += (m_sizeImage.cx + 3);
}
rect.Offset((Gdiplus::REAL)nItemImageX, 0);
rect.Width -= (Gdiplus::REAL)nItemImageX;
// 画单元格标题或链接内容
SolidBrush solidBrushItem(m_clrText);
if((m_nHoverRow == i) && (m_clrTextHover.GetValue() != Color(0, 0, 0, 0).GetValue())) // 设置了鼠标移动颜色,则使用
{
solidBrushItem.SetColor(m_clrTextHover);
}else
if((m_nDownRow == i) && (m_clrTextDown.GetValue() != Color(0, 0, 0, 0).GetValue())) // 设置了鼠标按下颜色,则使用
{
solidBrushItem.SetColor(m_clrTextDown);
}else
if(itemInfo.clrText.GetValue() != Color(0, 0, 0, 0).GetValue()) // 设置了单元格颜色,则使用
{
solidBrushItem.SetColor(itemInfo.clrText);
}else
if(rowInfo.bRowColor) // 设置了行颜色,则使用
{
solidBrushItem.SetColor(rowInfo.clrText);
}
CString strItemTitle = itemInfo.strTitle;
// 计算是否需要显示tip
itemInfo.bNeedTitleTip = rect.Width < GetTextBounds(font, strItemTitle).Width;
itemInfo.bNeedContentTip = rect.Width < GetTextBounds(font, itemInfo.strContent).Width;
if(!itemInfo.strLink.IsEmpty())
{
strItemTitle = itemInfo.strLink;
if((m_nHoverRow == i) && (rowInfo.nHoverItem == j))
{
solidBrushItem.SetColor(m_clrTextHover);
}else
{
solidBrushItem.SetColor((itemInfo.clrText.GetValue() != Color(0, 0, 0, 0).GetValue()) ? itemInfo.clrText : m_clrText);
}
}
// 设置单元格文字对齐方式,使用列的对齐方式
StringFormat strFormatColumn;
UINT uAlignment = m_uAlignment;
if(columnInfo.uAlignment != 0xFFFFUL)
{
uAlignment = columnInfo.uAlignment;
}
if(uAlignment == Align_Left)
{
strFormatColumn.SetAlignment(StringAlignmentNear);
}else
if(uAlignment == Align_Center)
{
strFormatColumn.SetAlignment(StringAlignmentCenter);
}else
if(uAlignment == Align_Right)
{
strFormatColumn.SetAlignment(StringAlignmentFar);
}
UINT uVAlignment = m_uVAlignment;
if(columnInfo.uVAlignment != 0xFFFFUL)
{
uVAlignment = columnInfo.uVAlignment;
}
if(uVAlignment == VAlign_Top)
{
strFormatColumn.SetLineAlignment(StringAlignmentNear);
}else
if(uVAlignment == VAlign_Middle)
{
strFormatColumn.SetLineAlignment(StringAlignmentCenter);
}else
if(uVAlignment == VAlign_Bottom)
{
strFormatColumn.SetLineAlignment(StringAlignmentFar);
}
if(!m_bTextWrap)
{
strFormatColumn.SetFormatFlags(StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces); // 不换行
}
// 根据bUseTitleFont决定用标题字体还是普通字体
BSTR bsItemTitle = strItemTitle.AllocSysString();
graphics.DrawString(bsItemTitle, (INT)wcslen(bsItemTitle),
itemInfo.bUseTitleFont ? &fontTitle : &font, rect, &strFormatColumn, itemInfo.bUseTitleFont ? &solidBrushT : &solidBrushItem);
::SysFreeString(bsItemTitle);
// 画单元格内容
if(!bSingleLine)
{
rect.Offset(0, (Gdiplus::REAL)m_nRowHeight / 2 + 2);
rect.Height = (Gdiplus::REAL)m_nRowHeight / 2 - 4;
BSTR bsItemContent = itemInfo.strContent.AllocSysString();
graphics.DrawString(bsItemContent, (INT)wcslen(bsItemContent), &font, rect, &strFormatColumn, &solidBrushItem);
::SysFreeString(bsItemContent);
}
// 设置单元格子控件的位置
for(size_t k = 0; k < itemInfo.vecControl.size(); k++)
{
CControlBase* pControl = itemInfo.vecControl.at(k);
if(pControl)
{
CRect rcParent = CRect(nPosItemX, m_nHeaderHeight + nVI*m_nRowHeight + 1,
(int)(rect.X+rect.Width), (nVI+1)*m_nRowHeight - 1);
if((int)(rect.GetRight()) > nContentWidth)
{
// 最后一列需要减去滚动条宽度
rcParent.right -= m_nScrollWidth;
}
rcParent.OffsetRect(m_rc.left - m_nVirtualLeft, m_rc.top - (nYViewPos + m_nHeaderHeight));
pControl->SetPositionWithParent(rcParent);
CRect rcControl = pControl->GetRect();
// 只有当前在显示范围内的控件设置为可见
if( (rcControl.top < m_rc.top) || (rcControl.bottom > m_rc.bottom) ||
(rcControl.left < m_rc.left) || (rcControl.right > m_rc.right) )
{
pControl->SetVisible(FALSE);
}else
{
pControl->SetVisible(TRUE);
}
}
}
if(j == 0)
{
// 为了使第二列开始是对齐的,所以第二列开始位置按照第一列的宽度计算
nPosItemX = itemInfo.rcItem.right;
}else
{
nPosItemX += itemInfo.rcItem.Width();
}
}
// 画分隔线(采用拉伸模式)
if(m_pImageSeperator != NULL)
{
// 使用拉伸模式画图
graphics.DrawImage(m_pImageSeperator, RectF(0, (Gdiplus::REAL)(m_nHeaderHeight + (nVI+1)*m_nRowHeight), (Gdiplus::REAL)(nContentWidth-2), (Gdiplus::REAL)m_sizeSeperator.cy),
0, 0, (Gdiplus::REAL)m_sizeSeperator.cx, (Gdiplus::REAL)m_sizeSeperator.cy, UnitPixel);
}else
if(m_clrSeperator.GetValue() != Color(0, 0, 0, 0).GetValue())
{
// 未指定图片,并且分隔线显色不是全0,则画矩形
graphics.FillRectangle(&solidBrushS, 0, m_nHeaderHeight + (nVI+1)*m_nRowHeight, nContentWidth-2, 1);
}
}
// 把不在显示范围内的单元格的控件都设置为不可见
for(int i = 0; i < (int)m_vecRowInfo.size(); i++)
{
if((i < m_nFirstViewRow) || (i > m_nLastViewRow))
{
GridRowInfo &rowInfo = m_vecRowInfo.at(i);
for(size_t j = 0; j < rowInfo.vecItemInfo.size(); j++)
{
GridItemInfo &itemInfo = rowInfo.vecItemInfo.at(j);
for(size_t k = 0; k < itemInfo.vecControl.size(); k++)
{
CControlBase* pControl = itemInfo.vecControl.at(k);
if(pControl)
{
pControl->SetVisible(FALSE);
}
}
}
}
}
}
}
// 输出到界面DC,使用与的方式合并背景
// 标题行输出
if(m_nHeaderHeight > 0)
{
dc.BitBlt(m_rc.left,m_rc.top, nViewWidth, m_nHeaderHeight, &m_memDC, m_nVirtualLeft, 0, SRCCOPY);//SRCAND);
}
// 内容部分输出
int nContentHeight = m_rc.Height() - m_nHeaderHeight;
if(nTotalColumnWidth > m_rc.Width())
{
nContentHeight -= m_nScrollWidth;
}
dc.BitBlt(m_rc.left,m_rc.top + m_nHeaderHeight, nViewWidth, nContentHeight, &m_memDC, m_nVirtualLeft, nYViewPos + m_nHeaderHeight, SRCCOPY);//SRCAND);
}
void CDuiText::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
// 计算显示位置
CDuiScrollVertical* pScrollV = (CDuiScrollVertical*)m_pControScrollV;
int nCurPos = pScrollV->GetScrollCurrentPos(); // 当前top位置
int nMaxRange = pScrollV->GetScrollMaxRange();
int nVirtualTop = 0; // 当前显示的是虚拟图片中什么位置开始的图片
m_nVirtualHeight = GetVirtualHeight();
if(m_nVirtualHeight > m_rc.Height())
{
nVirtualTop = (nMaxRange > 0) ? nCurPos*(m_nVirtualHeight-m_rc.Height())/nMaxRange : 0;
}else
{
nVirtualTop = 0;
}
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth, m_nVirtualHeight);
Graphics graphics(m_memDC);
if(m_bBack)
{
SolidBrush brush(m_clrBack);
graphics.FillRectangle(&brush, 0, 0, nWidth, nHeight);
}
else
{
//m_memDC.BitBlt(0, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
m_memDC.BitBlt(0, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, WHITENESS); // 画白色背景
DrawVerticalTransition(m_memDC, dc, CRect(0, 0+nVirtualTop, nWidth, nHeight+nVirtualTop), // 背景透明度
m_rc, m_nBkTransparent, m_nBkTransparent);
}
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
::SysFreeString(bsFont);
SolidBrush solidBrush(m_clrText);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 设置水平和垂直对齐方式
DUI_STRING_ALIGN_DEFINE();
//strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
strFormat.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
//strFormat.SetTrimming(StringTrimmingEllipsisWord); // 以单词为单位去尾,略去部分使用省略号
int nXPos = 0;
if(m_pImage != NULL)
{
graphics.DrawImage(m_pImage, Rect(0, (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
0, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nXPos += m_sizeImage.cx + 5;
}
Size size = GetTextBounds(font, strFormat, nWidth, m_strTitle);
int nStart = m_strTitle.Find(m_strMark, m_nStart);
if(m_strMark.IsEmpty() || (nStart == -1))
{
int nTextWidth = nWidth - nXPos;
if(m_bScrollV)
{
nTextWidth -= m_nScrollWidth;
}
// 先画阴影
if(m_bEnableShadow)
{
RectF rectShadow((Gdiplus::REAL)(nXPos + 1), (Gdiplus::REAL)1, (Gdiplus::REAL)nTextWidth, (Gdiplus::REAL)max(size.Height, nHeight));
SolidBrush solidBrushS(m_clrTextShadow);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rectShadow, &strFormat, &solidBrushS);
::SysFreeString(bsTitle);
}
// 再画正常的文字
RectF rect((Gdiplus::REAL)(nXPos), (Gdiplus::REAL)0, (Gdiplus::REAL)nTextWidth, (Gdiplus::REAL)(max(size.Height, nHeight)));
if((m_enButtonState == enBSHover) && m_bEnableHover)
{
SolidBrush solidBrushH(m_clrTextHover);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrushH);
::SysFreeString(bsTitle);
}else
{
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
else
{
SolidBrush solidBrushM(m_clrMark);
SolidBrush solidBrushS(m_clrTextShadow);
CString srtL = m_strTitle.Left(nStart);
CString srtR = m_strTitle.Right(m_strTitle.GetLength() - m_strMark.GetLength() - nStart);
Size sizeL = GetTextBounds(font, strFormat, srtL);
Size sizeM = GetTextBounds(font, strFormat, m_strMark);
Size sizeR = GetTextBounds(font, strFormat, srtR);
if(m_bEnableShadow)
{
BSTR bsL = srtL.AllocSysString();
graphics.DrawString(bsL, (INT)wcslen(bsL), &font,
PointF((Gdiplus::REAL)(nXPos + 1), (Gdiplus::REAL)1), &strFormat, &solidBrushS);
::SysFreeString(bsL);
BSTR bsMark = m_strMark.AllocSysString();
graphics.DrawString(bsMark, (INT)wcslen(bsMark), &font,
PointF((Gdiplus::REAL)(nXPos + sizeL.Width + 2 + 1), (Gdiplus::REAL)1), &strFormat, &solidBrushS);
::SysFreeString(bsMark);
}
BSTR bsL = srtL.AllocSysString();
graphics.DrawString(bsL, (INT)wcslen(bsL), &font,
PointF((Gdiplus::REAL)(nXPos), (Gdiplus::REAL)0), &strFormat, &solidBrush);
::SysFreeString(bsL);
BSTR bsMark = m_strMark.AllocSysString();
graphics.DrawString(bsMark, (INT)wcslen(bsMark), &font,
PointF((Gdiplus::REAL)(nXPos + sizeL.Width + 2), (Gdiplus::REAL)0), &strFormat, &solidBrushM);
::SysFreeString(bsMark);
if(m_bEnableShadow)
{
RectF rect((Gdiplus::REAL)(nXPos + sizeL.Width + sizeM.Width + 4 + 1), (Gdiplus::REAL)(1), (Gdiplus::REAL)(nWidth - (nXPos + sizeL.Width + sizeM.Width + 4)), (Gdiplus::REAL)nHeight);
BSTR bsR = srtR.AllocSysString();
graphics.DrawString(bsR, (INT)wcslen(bsR), &font,
PointF((Gdiplus::REAL)(nXPos + sizeL.Width + sizeM.Width + 4), (Gdiplus::REAL)0), &strFormat, &solidBrushS);
::SysFreeString(bsR);
}
//RectF rect(nXPos + point.x + sizeL.Width + sizeM.Width + 4, point.y, nWidth - (nXPos + sizeL.Width + sizeM.Width + 4 + point.x), size.Height);
RectF rect((Gdiplus::REAL)(nXPos + sizeL.Width + sizeM.Width + 4), (Gdiplus::REAL)0, (Gdiplus::REAL)(nWidth - (nXPos + sizeL.Width + sizeM.Width + 4)), (Gdiplus::REAL)nHeight);
BSTR bsR = srtR.AllocSysString();
graphics.DrawString(bsR, (INT)wcslen(bsR), &font,
PointF((Gdiplus::REAL)(nXPos + sizeL.Width + sizeM.Width + 4), (Gdiplus::REAL)0), &strFormat, &solidBrush);
::SysFreeString(bsR);
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, 0, nVirtualTop, SRCCOPY);
}
void CDuiEdit::DrawControl(CDC &dc, CRect rcUpdate)
{
Graphics graphics(dc);
DrawImageFrame(graphics, m_pImage, m_rc, m_EditState * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, 4);
if(m_pLeftImage)
{
CRect rc;
rc.left = m_rc.left + 2;
rc.top = m_rc.top + (m_rc.Height() - m_sizeLeftImage.cy) / 2;
rc.right = rc.left + m_sizeLeftImage.cx;
rc.bottom = rc.top + m_sizeLeftImage.cy;
if(m_nLeftImageCount > m_buttonState)
{
graphics.DrawImage(m_pLeftImage, RectF((Gdiplus::REAL)rc.left , (Gdiplus::REAL)rc.top, (Gdiplus::REAL)rc.Width(), (Gdiplus::REAL)rc.Height()),
(Gdiplus::REAL)(m_buttonState * m_sizeLeftImage.cx), 0, (Gdiplus::REAL)m_sizeLeftImage.cx, (Gdiplus::REAL)m_sizeLeftImage.cy, UnitPixel);
}else
{
graphics.DrawImage(m_pLeftImage, RectF((Gdiplus::REAL)rc.left , (Gdiplus::REAL)rc.top, (Gdiplus::REAL)rc.Width(), (Gdiplus::REAL)rc.Height()),
0, 0, (Gdiplus::REAL)m_sizeLeftImage.cx, (Gdiplus::REAL)m_sizeLeftImage.cy, UnitPixel);
}
}
if(m_pSmallImage)
{
CRect rc;
rc.left = m_rc.right - m_sizeSmallImage.cx - 2;
rc.top = m_rc.top + (m_rc.Height() - m_sizeSmallImage.cy) / 2;
rc.right = rc.left + m_sizeSmallImage.cx;
rc.bottom = rc.top + m_sizeSmallImage.cy;
if(m_nSmallImageCount > m_buttonState)
{
graphics.DrawImage(m_pSmallImage, RectF((Gdiplus::REAL)rc.left , (Gdiplus::REAL)rc.top, (Gdiplus::REAL)rc.Width(), (Gdiplus::REAL)rc.Height()),
(Gdiplus::REAL)(m_buttonState * m_sizeSmallImage.cx), 0, (Gdiplus::REAL)m_sizeSmallImage.cx, (Gdiplus::REAL)m_sizeSmallImage.cy, UnitPixel);
}else
{
graphics.DrawImage(m_pSmallImage, RectF((Gdiplus::REAL)rc.left , (Gdiplus::REAL)rc.top, (Gdiplus::REAL)rc.Width(), (Gdiplus::REAL)rc.Height()),
0, 0, (Gdiplus::REAL)m_sizeSmallImage.cx, (Gdiplus::REAL)m_sizeSmallImage.cy, UnitPixel);
}
}
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
SolidBrush solidBrush(m_clrText);
SolidBrush solidBrushTip(m_clrTooltip);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
::SysFreeString(bsFont);
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentNear); // 水平方向左对齐
if(!m_bMultiLine)
{
// 单行文字
strFormat.SetLineAlignment(StringAlignmentCenter); // 垂直方向中间对齐
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
}else
{
strFormat.SetLineAlignment(StringAlignmentNear); // 垂直方向上对齐
}
RectF rect((Gdiplus::REAL)m_rcText.left, (Gdiplus::REAL)(m_rcText.top+2), (Gdiplus::REAL)m_rcText.Width(), (Gdiplus::REAL)(m_rcText.Height()-2));
if(!m_strTitle.IsEmpty())
{
// 文字非空
CString strTitle = m_strTitle;
if(m_bPassWord)
{
int nlen = strTitle.GetLength();
strTitle = "";
for(int i = 0; i < nlen; i++)
{
strTitle += '*';
}
}
BSTR bsTitle = strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}else
if(!m_strTooltip.IsEmpty())
{
// 如果没有文字,但设置了tooltip,则显示tooltip
BSTR bsTooltip = m_strTooltip.AllocSysString();
graphics.DrawString(bsTooltip, (INT)wcslen(bsTooltip), &font, rect, &strFormat, &solidBrushTip);
::SysFreeString(bsTooltip);
}
}
void CDuiListCtrl::DrawControl(CDC &dc, CRect rcUpdate)
{
// 列表画图方法:
// 1.列表的虚拟高度为每一行高度*行数
// 2.列表显示的top坐标由scroll控件记录
// 3.重画时候,根据top坐标位置计算出显示的第一行的序号,根据显示高度计算出显示的最后一行的序号
// 4.根据计算出的显示的行,画相应的内容到内存dc中
// 5.计算出显示的top坐标进行内存dc的拷贝
int nWidth = m_rc.Width() - m_nScrollWidth; // 减去滚动条的宽度
int nHeightAll = (int)m_vecRowInfo.size()*m_nRowHeight; // 总的虚拟高度 //m_rc.Height();
CScrollV* pScrollV = (CScrollV*)m_pControScrollV;
int nCurPos = pScrollV->GetScrollCurrentPos(); // 当前top位置
int nMaxRange = pScrollV->GetScrollMaxRange();
m_nVirtualTop = (nMaxRange > 0) ? nCurPos*(nHeightAll-m_rc.Height())/nMaxRange : 0; // 当前滚动条位置对应的虚拟的top位置
if(m_nVirtualTop < 0)
{
m_nVirtualTop = 0;
pScrollV->SetScrollCurrentPos(0);
}
m_nFirstViewRow = m_nVirtualTop / m_nRowHeight; // 显示的第一行序号
m_nLastViewRow = (m_nVirtualTop + m_rc.Height()) / m_nRowHeight; // 显示的最后一行序号
if(m_nLastViewRow >= (int)m_vecRowInfo.size())
{
m_nLastViewRow = (int)m_vecRowInfo.size() - 1;
}
if(m_nLastViewRow < 0)
{
m_nLastViewRow = 0;
}
int nHeightView = (m_nLastViewRow - m_nFirstViewRow +1) * m_nRowHeight; // 显示涉及到的虚拟高度
int nYViewPos = m_nVirtualTop - (m_nFirstViewRow * m_nRowHeight); // 内存dc显示到屏幕时候的top位置
if(nYViewPos < 0)
{
nYViewPos = 0;
}
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth, nHeightView);
Graphics graphics(m_memDC);
m_memDC.BitBlt(0, 0, nWidth, nHeightView, &dc, m_rc.left ,m_rc.top, WHITENESS); // 画白色背景
DrawVerticalTransition(m_memDC, dc, CRect(0, nYViewPos, nWidth, m_rc.Height()+nYViewPos), // 背景透明度
m_rc, m_nBkTransparent, m_nBkTransparent);
BSTR bsFontTitle = m_strFontTitle.AllocSysString();
FontFamily fontFamilyTitle(bsFontTitle);
Font fontTitle(&fontFamilyTitle, (REAL)m_nFontTitleWidth, m_fontTitleStyle, UnitPixel);
::SysFreeString(bsFontTitle);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
::SysFreeString(bsFont);
SolidBrush solidBrush(m_clrText); // 正常文字画刷
SolidBrush solidBrushH(m_clrTextHover); // 热点文字画刷
SolidBrush solidBrushD(m_clrTextDown); // 当前行画刷
SolidBrush solidBrushT(m_clrTitle); // 标题文字画刷
SolidBrush solidBrushS(m_clrSeperator); // 分割线画刷
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 普通文字的对齐方式
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentNear); // 左对齐
if(m_uVAlignment == VAlign_Top)
{
strFormat.SetLineAlignment(StringAlignmentNear); // 上对其
}else
if(m_uVAlignment == VAlign_Middle)
{
strFormat.SetLineAlignment(StringAlignmentCenter); // 中间对齐
}else
if(m_uVAlignment == VAlign_Bottom)
{
strFormat.SetLineAlignment(StringAlignmentFar); // 下对齐
}
strFormat.SetTrimming(StringTrimmingEllipsisWord); // 以单词为单位去尾,略去部分使用省略号
//strFormat.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
if(!m_bTextWrap)
{
strFormat.SetFormatFlags(StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces); // 不换行
}
// 时间字段采用右对齐
StringFormat strFormatRight;
strFormatRight.SetAlignment(StringAlignmentFar); // 右对齐
if(m_uVAlignment == VAlign_Top)
{
strFormatRight.SetLineAlignment(StringAlignmentNear); // 上对其
}else
if(m_uVAlignment == VAlign_Middle)
{
strFormatRight.SetLineAlignment(StringAlignmentCenter); // 中间对齐
}else
if(m_uVAlignment == VAlign_Bottom)
{
strFormatRight.SetLineAlignment(StringAlignmentFar); // 下对齐
}
//strFormatRight.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
if(!m_bTextWrap)
{
strFormatRight.SetFormatFlags(StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces); // 不换行
}
if(m_vecRowInfo.size() > 0)
{
for(int i = m_nFirstViewRow; i <= m_nLastViewRow && i < (int)m_vecRowInfo.size(); i++)
{
ListRowInfo &rowInfo = m_vecRowInfo.at(i);
SolidBrush solidBrushRow(rowInfo.clrText); // 行定义的颜色
int nXPos = 0;
int nVI = i - m_nFirstViewRow;
// 鼠标移动到行时候显示的背景颜色
if(m_nHoverRow == i)
{
SolidBrush brush(m_clrRowHover);
graphics.FillRectangle(&brush, 0, nVI*m_nRowHeight, nWidth, m_nRowHeight);
}
// 画检查框
int nCheckImgY = 3;
if((m_sizeCheckBox.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nCheckImgY = (m_nRowHeight - m_sizeCheckBox.cy) / 2 + 1;
}
if((rowInfo.nCheck != -1) && (m_pImageCheckBox != NULL))
{
int nCheckImageIndex = ((m_nHoverRow == i) ? ((rowInfo.nCheck==1) ? 4 : 1) : ((rowInfo.nCheck==1) ? 2 : 0));
graphics.DrawImage(m_pImageCheckBox, Rect(nXPos, nVI*m_nRowHeight + nCheckImgY, m_sizeCheckBox.cx, m_sizeCheckBox.cy),
nCheckImageIndex * m_sizeCheckBox.cx, 0, m_sizeCheckBox.cx, m_sizeCheckBox.cy, UnitPixel);
rowInfo.rcCheck.SetRect(nXPos, i*m_nRowHeight + nCheckImgY, nXPos + m_sizeCheckBox.cx, i*m_nRowHeight + nCheckImgY + m_sizeCheckBox.cy);
nXPos += (m_sizeCheckBox.cx + 3);
}
// 画行左边图片
int nImgY = 3;
if(rowInfo.pImage != NULL)
{
if((rowInfo.sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - rowInfo.sizeImage.cy) / 2 + 1;
}
// 使用行数据指定的图片
graphics.DrawImage(rowInfo.pImage, Rect(nXPos, nVI*m_nRowHeight + nImgY, rowInfo.sizeImage.cx, rowInfo.sizeImage.cy),
0, 0, rowInfo.sizeImage.cx, rowInfo.sizeImage.cy, UnitPixel);
nXPos += (rowInfo.sizeImage.cx + 3);
}else
if((rowInfo.nImageIndex != -1) && (m_pImage != NULL))
{
if((m_sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - m_sizeImage.cy) / 2 + 1;
}
// 使用索引图片
graphics.DrawImage(m_pImage, Rect(nXPos, nVI*m_nRowHeight + nImgY, m_sizeImage.cx, m_sizeImage.cy),
rowInfo.nImageIndex*m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nXPos += (m_sizeImage.cx + 3);
}
// 画行右边图片
int nRightImageWidth = 0;
nImgY = 3;
if(rowInfo.pRightImage != NULL)
{
if((rowInfo.sizeRightImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - rowInfo.sizeRightImage.cy) / 2 + 1;
}
// 使用行数据指定的图片
graphics.DrawImage(rowInfo.pRightImage, Rect(nWidth-rowInfo.sizeRightImage.cx-1, nVI*m_nRowHeight + nImgY, rowInfo.sizeRightImage.cx, rowInfo.sizeRightImage.cy),
0, 0, rowInfo.sizeRightImage.cx, rowInfo.sizeRightImage.cy, UnitPixel);
nRightImageWidth = rowInfo.sizeRightImage.cx + 1;
}else
if((rowInfo.nRightImageIndex != -1) && (m_pImage != NULL))
{
if((m_sizeImage.cy*2 > m_nRowHeight) || (m_uVAlignment == VAlign_Middle))
{
nImgY = (m_nRowHeight - m_sizeImage.cy) / 2 + 1;
}
// 使用索引图片
graphics.DrawImage(m_pImage, Rect(nWidth-m_sizeImage.cx-1, nVI*m_nRowHeight + nImgY, m_sizeImage.cx, m_sizeImage.cy),
rowInfo.nRightImageIndex*m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
nRightImageWidth = m_sizeImage.cx + 1;
}
// 画内容
RectF rect((Gdiplus::REAL)nXPos, (Gdiplus::REAL)(nVI*m_nRowHeight + 1), (Gdiplus::REAL)(nWidth-20), (Gdiplus::REAL)(m_bSingleLine ? (m_nRowHeight - 2) : (m_nRowHeight / 2 - 2)) );
if(!rowInfo.strTime.IsEmpty())
{
Size size = GetTextBounds(font, rowInfo.strTime);
rect.Width -= (size.Width + 5);
}
// 链接文字
int nLinkWidth = 0;
if(!rowInfo.strLink2.IsEmpty())
{
Size sizeLink = GetTextBounds(font, strFormatRight, rowInfo.strLink2);
nLinkWidth += (sizeLink.Width + 10);
RectF rectLink((Gdiplus::REAL)(nWidth-nLinkWidth-nRightImageWidth), (Gdiplus::REAL)(nVI*m_nRowHeight + (m_nRowHeight - sizeLink.Height)/2), (Gdiplus::REAL)(sizeLink.Width+8), (Gdiplus::REAL)sizeLink.Height);
rowInfo.rcLink2.SetRect((int)rectLink.X,(int)rectLink.Y,(int)(rectLink.X+sizeLink.Width),(int)(rectLink.Y+rectLink.Height));
rowInfo.rcLink2.OffsetRect(0, m_nFirstViewRow*m_nRowHeight);
if(((m_nHoverRow == i) || (m_nDownRow == i)) && (rowInfo.nHoverLink == 1))
{
BSTR bsLink2 = rowInfo.strLink2.AllocSysString();
graphics.DrawString(bsLink2, (INT)wcslen(bsLink2), &font, rectLink, &strFormatRight, &solidBrushH);
::SysFreeString(bsLink2);
}else
{
BSTR bsLink2 = rowInfo.strLink2.AllocSysString();
graphics.DrawString(bsLink2, (INT)wcslen(bsLink2), &font, rectLink, &strFormatRight, &solidBrush);
::SysFreeString(bsLink2);
}
}
if(!rowInfo.strLink1.IsEmpty())
{
Size sizeLink = GetTextBounds(font, strFormatRight, rowInfo.strLink1);
nLinkWidth += (sizeLink.Width + 10);
RectF rectLink((Gdiplus::REAL)(nWidth-nLinkWidth-nRightImageWidth), (Gdiplus::REAL)(nVI*m_nRowHeight + (m_nRowHeight - sizeLink.Height)/2), (Gdiplus::REAL)(sizeLink.Width+8), (Gdiplus::REAL)sizeLink.Height);
rowInfo.rcLink1.SetRect((int)rectLink.X,(int)rectLink.Y,(int)(rectLink.X+sizeLink.Width),(int)(rectLink.Y+rectLink.Height));
rowInfo.rcLink1.OffsetRect(0, m_nFirstViewRow*m_nRowHeight);
if(((m_nHoverRow == i) || (m_nDownRow == i)) && (rowInfo.nHoverLink == 0))
{
BSTR bsLink1 = rowInfo.strLink1.AllocSysString();
graphics.DrawString(bsLink1, (INT)wcslen(bsLink1), &font, rectLink, &strFormatRight, &solidBrushH);
::SysFreeString(bsLink1);
}else
{
BSTR bsLink1 = rowInfo.strLink1.AllocSysString();
graphics.DrawString(bsLink1, (INT)wcslen(bsLink1), &font, rectLink, &strFormatRight, &solidBrush);
::SysFreeString(bsLink1);
}
}
rect.Width -= nLinkWidth;
// 计算是否需要显示tip
rowInfo.bNeedTitleTip = rect.Width < GetTextBounds(font, rowInfo.strTitle).Width;
rowInfo.bNeedContentTip = rect.Width < GetTextBounds(font, rowInfo.strContent).Width;
Size sizeTime = GetTextBounds(font, strFormatRight, rowInfo.strTime);
int nTimeWidth = sizeTime.Width + 10;
RectF rectTime((Gdiplus::REAL)(nWidth-nRightImageWidth-2-nTimeWidth-nLinkWidth), (Gdiplus::REAL)(nVI*m_nRowHeight + 1), (Gdiplus::REAL)nTimeWidth, (Gdiplus::REAL)(m_bSingleLine ? m_nRowHeight : (m_nRowHeight / 2)) );
if(m_nHoverRow == i)
{
// 画标题行
BSTR bsTitle = rowInfo.strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &fontTitle, rect, &strFormat, &solidBrushH);
::SysFreeString(bsTitle);
// 画时间
if(!rowInfo.strTime.IsEmpty())
{
BSTR bsTime = rowInfo.strTime.AllocSysString();
graphics.DrawString(bsTime, (INT)wcslen(bsTime), &font, rectTime, &strFormatRight, &solidBrushH);
::SysFreeString(bsTime);
}
// 画内容行
if(!m_bSingleLine)
{
rect.Offset(0, (Gdiplus::REAL)m_nRowHeight / 2 + 2);
rect.Width = (Gdiplus::REAL)nWidth-20;
rect.Height = (Gdiplus::REAL)m_nRowHeight / 2 - 4;
BSTR bsContent = rowInfo.strContent.AllocSysString();
graphics.DrawString(bsContent, (INT)wcslen(bsContent), &font, rect, &strFormat, &solidBrushH);
::SysFreeString(bsContent);
}
}else
if(m_nDownRow == i)
{
// 画标题行
BSTR bsTitle = rowInfo.strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &fontTitle, rect, &strFormat, &solidBrushD);
::SysFreeString(bsTitle);
// 画时间
if(!rowInfo.strTime.IsEmpty())
{
BSTR bsTime = rowInfo.strTime.AllocSysString();
graphics.DrawString(bsTime, (INT)wcslen(bsTime), &font, rectTime, &strFormatRight, &solidBrushD);
::SysFreeString(bsTime);
}
// 画内容行
if(!m_bSingleLine)
{
rect.Offset(0, (Gdiplus::REAL)m_nRowHeight / 2 + 2);
rect.Width = (Gdiplus::REAL)nWidth-20;
rect.Height = (Gdiplus::REAL)m_nRowHeight / 2 - 4;
BSTR bsContent = rowInfo.strContent.AllocSysString();
graphics.DrawString(bsContent, (INT)wcslen(bsContent), &font, rect, &strFormat, &solidBrushD);
::SysFreeString(bsContent);
}
}else
{
// 画标题行
BSTR bsTitle = rowInfo.strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &fontTitle,
rect, &strFormat, rowInfo.bRowColor ? &solidBrushRow : &solidBrushT);
::SysFreeString(bsTitle);
// 画时间
if(!rowInfo.strTime.IsEmpty())
{
BSTR bsTime = rowInfo.strTime.AllocSysString();
graphics.DrawString(bsTime, (INT)wcslen(bsTime), &font,
rectTime, &strFormatRight, rowInfo.bRowColor ? &solidBrushRow : &solidBrush);
::SysFreeString(bsTime);
}
// 画内容行
if(!m_bSingleLine)
{
rect.Offset(0, (Gdiplus::REAL)m_nRowHeight / 2 + 2);
rect.Width = (Gdiplus::REAL)nWidth-20;
rect.Height = (Gdiplus::REAL)m_nRowHeight / 2 - 4;
BSTR bsContent = rowInfo.strContent.AllocSysString();
graphics.DrawString(bsContent, (INT)wcslen(bsContent), &font,
rect, &strFormat, rowInfo.bRowColor ? &solidBrushRow : &solidBrush);
::SysFreeString(bsContent);
}
}
// 画分隔线(采用拉伸模式)
if(m_pImageSeperator != NULL)
{
// 使用拉伸模式属性画图
graphics.DrawImage(m_pImageSeperator, RectF(0, (Gdiplus::REAL)((nVI+1)*m_nRowHeight), (Gdiplus::REAL)(nWidth-2), (Gdiplus::REAL)m_sizeSeperator.cy),
0, 0, (Gdiplus::REAL)m_sizeSeperator.cx, (Gdiplus::REAL)m_sizeSeperator.cy, UnitPixel);
// 使用平铺方式填充矩形(暂不使用这种方式)
//TextureBrush tileBrush(m_pImageSeperator, WrapModeTile);
//graphics.FillRectangle(&tileBrush, RectF(0, (nVI+1)*m_nRowHeight, nWidth-2, m_sizeSeperator.cy));
}else
{
// 未指定图片,则画矩形
graphics.FillRectangle(&solidBrushS, 0, (nVI+1)*m_nRowHeight, nWidth-2, 1);
}
}
}
}
// 输出到界面DC,使用与的方式合并背景
dc.BitBlt(m_rc.left,m_rc.top, nWidth, m_rc.Height(), &m_memDC, 0, nYViewPos, SRCCOPY);//SRCAND);
}
void CDrawWarn::Draw(CDC* pDC)
{
ASSERT_VALID(this);
CRect rect = m_position;
rect.NormalizeRect();
if(rect.Width() < 10 || rect.Height()<10)
return;
Rect GdiRect (rect.TopLeft().x,rect.TopLeft().y,rect.Size().cx,rect.Size().cy);
Color crBackColor,crTitleColor,crLineColor,crTextColor ;
crBackColor.SetFromCOLORREF(m_ctlBackColor);
crTitleColor.SetFromCOLORREF(m_ctlTitleColor );
crLineColor.SetFromCOLORREF(m_ctlLineColor);
crTextColor.SetFromCOLORREF(m_ctlTextColor);
Graphics graphics (pDC->m_hDC);
graphics.SetSmoothingMode (SmoothingModeHighSpeed);
Graphics Textgraphics (pDC->m_hDC);
SolidBrush solidBrush(crBackColor);
SolidBrush TitleBrush(crTitleColor);
SolidBrush TextBrush(crTextColor);
Pen pen(crLineColor,1);
graphics.FillRectangle(&solidBrush,GdiRect);
BSTR bstr = m_fontName.AllocSysString();
/// BSTR bstr = _com_util::ConvertStringToBSTR(m_fontName);
FontFamily fontFamily(bstr);
SysFreeString(bstr);
Font font(&fontFamily, m_fontSize, m_fontStyle, UnitPoint);
for(int j =1; j<= m_nColCount; j++)
{
m_nCellWidth = 0;
for(int i=1; i<= m_nRowCount; i++)
{
CRect rc = rect;
if(m_bIsAutoSize)
{
m_nCellWidth = rect.Width()/m_nRowCount;
m_nCellHeight = rect.Height()/m_nColCount;
rc.TopLeft().x += (i-1)*m_nCellWidth;
rc.TopLeft().y += (j-1)*m_nCellHeight;
m_CellRect = CRect(rc.TopLeft(),CSize(m_nCellWidth,m_nCellHeight));
m_CellRect.NormalizeRect();
}
else
{
rc.TopLeft().x += m_nCellWidth;
m_nCellWidth += rect.Width()*m_nPercent[i-1]/100;
m_nCellHeight = rect.Height()/m_nColCount;
rc.TopLeft().y += (j-1)*m_nCellHeight;
m_CellRect = CRect(rc.TopLeft(),CSize(rect.Width()*m_nPercent[i-1]/100,m_nCellHeight));
m_CellRect.NormalizeRect();
}
Rect CellRect(m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
graphics.DrawRectangle(&pen,CellRect);
if(j == m_nColCount) //画标题
{
StringFormat stringFormat;
stringFormat.SetAlignment(StringAlignmentCenter);
stringFormat.SetLineAlignment(StringAlignmentCenter);
stringFormat.SetFormatFlags(StringFormatFlagsDirectionRightToLeft);
stringFormat.SetTrimming(m_trimmingSyle);
CString m_strButton;
if(i == 1)
m_strButton = "点号";
if(i == 2)
m_strButton = "数据";
if(i == 3)
m_strButton = "说明";
if(i == 4)
m_strButton = "报警原因";
if(i == 5)
m_strButton = "时间";
m_strButton.TrimRight();
bstr = m_strButton.AllocSysString();
/// bstr = _com_util::ConvertStringToBSTR(m_strButton);
RectF theRect (m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
Matrix matrix(1,0,0,-1,0,0);
Textgraphics.SetTransform(&matrix);
theRect.Y *=-1;
theRect.Height*=-1;
Normallize (theRect);
Textgraphics.FillRectangle(&TitleBrush,theRect);
Textgraphics.DrawString(bstr,-1,&font, theRect,&stringFormat, &TextBrush);
SysFreeString(bstr);
}
else
{ //画文字 m_CStrWarn pStrWarn
StringFormat stringFormat;
stringFormat.SetAlignment(StringAlignmentNear);
stringFormat.SetLineAlignment(StringAlignmentNear);
CString strWarn;
/* if(i == 1)
strWarn = m_CStrWarn[j].strPoint;
if(i == 2)
strWarn = m_CStrWarn[j].strDate;
if(i == 3)
strWarn = m_CStrWarn[j].strTime;
if(i == 4)
strWarn = m_CStrWarn[j].strText;
if(i == 5)
strWarn = m_CStrWarn[j].strWarn;
*/
strWarn.TrimRight();
bstr = strWarn.AllocSysString();
/// bstr = _com_util::ConvertStringToBSTR(strWarn);
RectF theRect (m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
Matrix matrix(1,0,0,-1,0,0);
Textgraphics.SetTransform(&matrix);
theRect.Y *=-1;
theRect.Height*=-1;
Normallize (theRect);
Textgraphics.DrawString(bstr,-1,&font, theRect,&stringFormat, &TextBrush);
SysFreeString(bstr);
}
}
}
graphics.ReleaseHDC(pDC->m_hDC);
}
void ASSISTANT::Text::Draw(CDC *pDC, float _zoomFactor, double dOffX, double dOffY)
{
if (!visible) return;
if (text.IsEmpty())
return;
Gdiplus::Graphics graphics(pDC->m_hDC);
graphics.SetTextRenderingHint(Gdiplus::TextRenderingHintAntiAliasGridFit);
// Move and Scale
graphics.TranslateTransform((Gdiplus::REAL)dOffX, (Gdiplus::REAL)dOffY);
Gdiplus::Font gdipFont(pDC->m_hDC, &m_logFont);
Gdiplus::FontFamily fontFamily;
gdipFont.GetFamily(&fontFamily);
int fontStyle = GetValidFontStyle(fontFamily);
Gdiplus::REAL ascent = fontFamily.GetCellAscent(fontStyle) *
(gdipFont.GetSize() / fontFamily.GetEmHeight(fontStyle));
Gdiplus::PointF drawPoint;
drawPoint.X = (Gdiplus::REAL)m_dX;
drawPoint.Y = (Gdiplus::REAL)(m_dY - ascent);
// convert text string to WCHAR format
int iStringLength = text.GetLength();
WCHAR *wcString = (WCHAR *)malloc((iStringLength+1)*sizeof(WCHAR)); // +1 for null termination
#ifdef _UNICODE
wcscpy(wcString, text);
#else
MultiByteToWideChar(CP_ACP, 0, text, iStringLength+1,
wcString, iStringLength+1);
#endif
// compute real text width
Gdiplus::StringFormat measureStringFormat(Gdiplus::StringFormatFlagsMeasureTrailingSpaces);
Gdiplus::RectF bbox;
graphics.MeasureString(wcString, iStringLength, &gdipFont, Gdiplus::PointF(0.0, 0.0), &measureStringFormat, &bbox);
Gdiplus::CharacterRange charRange(0, iStringLength);
measureStringFormat.SetMeasurableCharacterRanges(1, &charRange);
Gdiplus::Region pRangeRegion[1];
graphics.MeasureCharacterRanges(wcString, iStringLength,
&gdipFont, bbox, &measureStringFormat, 1, pRangeRegion);
// get bounding rectangle
Gdiplus::RectF rect;
pRangeRegion[0].GetBounds(&rect, &graphics);
Gdiplus::REAL realTextWidth = rect.Width;
if (iStringLength > 1 && m_dWidth != 0 && realTextWidth != m_dWidth)
{
Gdiplus::REAL scaleX = (Gdiplus::REAL)(m_dWidth / realTextWidth);
graphics.ScaleTransform(scaleX, 1.0);
drawPoint.X = (Gdiplus::REAL)(m_dX / scaleX); //(x_*scaleX - x_);
}
// the text should begin at x, y
drawPoint.X -= rect.X;
graphics.ScaleTransform(_zoomFactor, _zoomFactor);
Gdiplus::Color clrText(m_argbLineColor);
Gdiplus::SolidBrush solidBrush(clrText);
graphics.DrawString(wcString, iStringLength, &gdipFont, drawPoint, &measureStringFormat, &solidBrush);
if (wcString)
delete wcString;
}
void CDuiSlider::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
UpdateMemDC(dc, nWidth, nHeight * 4);
Graphics graphics(m_memDC);
// 画4个状态的内存图片
for(int i = 0; i < 4; i++)
{
// 复制背景
m_memDC.BitBlt(0, i * nHeight, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
int nPosY = i * nHeight;
if(m_pImageForeGround != NULL) // 使用背景和前景图片画进度条
{
if(m_pImageBackGround != NULL) // 画背景
{
DrawImageFrameMID(graphics, m_pImageBackGround, CRect(0, nPosY + m_nThumbTop, nWidth, nPosY + m_nThumbTop + m_nSliderHeight),
0, 0, m_sizeBackGround.cx, m_sizeBackGround.cy,
m_nHeadLength, 0, m_nHeadLength, 0);
}
if(m_nProgress != 0) // 画前景
{
DrawImageFrameMID(graphics, m_pImageForeGround, CRect(0, nPosY + m_nThumbTop, nWidth * m_nProgress / m_nMaxProgress, nPosY + m_nThumbTop + m_nSliderHeight),
0, 0, m_sizeForeGround.cx, m_sizeForeGround.cy,
m_nHeadLength, 0, m_nHeadLength, 0);
}
}else
if(m_pImage != NULL) // 使用单张图片画进度条
{
DrawImageFrame(graphics, m_pImage, CRect(0, nPosY + m_nThumbTop, nWidth, nPosY + m_nThumbTop + m_nSliderHeight),
0, 0, m_sizeImage.cx, m_sizeImage.cy, 2);
if(m_nProgress != 0)
{
DrawImageFrame(graphics, m_pImage, CRect(0, nPosY + m_nThumbTop, nWidth * m_nProgress / m_nMaxProgress, nPosY + m_nThumbTop + m_nSliderHeight),
m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, 2);
}
}
// 画滑块
if(m_pImageThumb != NULL)
{
// 计算滑块的位置
int nPos = (int)__max(m_rc.Width() * m_nProgress / m_nMaxProgress - m_nThumbWidth / 2, 0);
nPos = (int)__min(nPos, m_rc.Width() - m_nThumbWidth);
Rect rect(nPos, nPosY, m_nThumbWidth, m_nThumbHeight);
graphics.DrawImage(m_pImageThumb, rect, i * m_sizeThumb.cx, 0, m_sizeThumb.cx, m_sizeThumb.cy, UnitPixel);
}
// 画进度文字
if(m_bShowText)
{
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
::SysFreeString(bsFont);
SolidBrush solidBrush(m_clrText);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
// 设置水平和垂直对齐方式
DUI_STRING_ALIGN_DEFINE();
strFormat.SetFormatFlags( StringFormatFlagsNoClip | StringFormatFlagsMeasureTrailingSpaces);
CString strText;
// 只有最大值设置为100情况下才会显示百分号
strText.Format(_T("%s%d%s"), m_strTitle, m_nProgress, (m_nMaxProgress == 100) ? _T("%") : _T(""));
BSTR bsTitle = strText.AllocSysString();
RectF rect((Gdiplus::REAL)(0), (Gdiplus::REAL)nPosY, (Gdiplus::REAL)nWidth, (Gdiplus::REAL)nHeight);
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, 0, m_enButtonState * nHeight, SRCCOPY);
}
// 曲线绘制.
void DataGrids::DrawCurve(void)
{
#define SHOW_LOWLEVEL 0
#define X(_x) UserX((_x)+xMarginLeft)
#define Y(_y) UserY((_y)+yMarginDown)
WideString strList[] =
{
L"Vl(低电平电压)",
L"Vh(高电平电压)",
L"Tr(上升沿)",
L"Th(高电平)",
L"Tf(下降沿)",
L"Tl(低电平)",
};
Gdiplus::SolidBrush solidBrush(Gdiplus::Color(255, 0, 0, 255));
Gdiplus::Pen pX(Gdiplus::Color(255, 0, 0, 0),1);
Gdiplus::AdjustableArrowCap cap(8,6,true);
Gdiplus::Font font(L"Times New Roman",8);
Gdiplus::SolidBrush s( Gdiplus::Color(255, 0, 0, 0));
Gdiplus::PointF *pComm = new Gdiplus::PointF[4];
// 有上升.下降沿的斜坡.
Gdiplus::Pen p(Gdiplus::Color(255, 0, 0, 255),2);
//先将点计算好.
Gdiplus::PointF *points = new Gdiplus::PointF[10];
// 低电平位置为可用高度的 %20.
// 高电平位置位可用高度的 %80.
// 占空比位%50.
// 上升沿/下降沿使用的%5的位置.
// 低电平先开始.
// 开始区域.(xMarkHeight + 20 , yMarksHeigh + 20).
// 结束区域.(width - 20, heigh - 20).
double fLvPos = 0.1 + 0.1 * m_fLRatio / 100, fHvPos = 0.4 + 0.4 * m_fHRatio/100, fHvLen = (m_fDuty*0.8/100.0), fLvLen = ((100-m_fDuty)*0.8/100), fRiseLen = 0.05,fFallLen= 0.05;
double xMarginLeft = xMarkHeight + 30;
double yMarginDown = yMarkHeight + 20;
double xMarginRight = 20;
double yMarginTop = 20;
double RealWidth = m_iWidth - xMarginLeft - xMarginRight;
double RealHeight = m_iHeight - yMarginDown - yMarginTop;
int idx = 0;
points[idx++] = Gdiplus::PointF((int)X(0),(int)Y(fLvPos * RealHeight));
points[idx++] = Gdiplus::PointF((int)X(fHvLen * RealWidth),(int)Y(fLvPos * RealHeight));
points[idx++] = Gdiplus::PointF((int)X((fHvLen + fRiseLen)* RealWidth),(int)Y(fHvPos * RealHeight));
points[idx++] = Gdiplus::PointF((int)X((fHvLen + fRiseLen + fLvLen)* RealWidth),(int)Y(fHvPos * RealHeight));
points[idx++] = Gdiplus::PointF((int)X((fHvLen + fRiseLen + fLvLen + fFallLen)* RealWidth),(int)Y(fLvPos * RealHeight));
points[idx++] = Gdiplus::PointF((int)X(RealWidth),(int)Y(fLvPos * RealHeight));
m_stGrp->DrawLines(&p,points,idx);
//设置位虚线.
pX.SetDashStyle(Gdiplus::DashStyleDash);
pX.SetAlignment(Gdiplus::PenAlignmentCenter);
pX.SetDashOffset(20.0);
// P0 起点. P1 上升沿的起点. P2上升沿结束点. P3 下降沿起点. P4 下降沿的结束点. P5 结束点.
#if SHOW_LOWLEVEL
pComm[0].X = (int)points[0].X;
pComm[0].Y = (int)points[0].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop);
m_stGrp->DrawLines(&pX,pComm,2);
#endif
pComm[0].X = (int)points[1].X;
pComm[0].Y = (int)points[1].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop);
m_stGrp->DrawLines(&pX,pComm,2);
pComm[0].X = (int)points[2].X;
pComm[0].Y = (int)points[2].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop - 35);
m_stGrp->DrawLines(&pX,pComm,2);
pComm[0].X = (int)points[3].X;
pComm[0].Y = (int)points[3].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop - 35);
m_stGrp->DrawLines(&pX,pComm,2);
pComm[0].X = (int)points[4].X;
pComm[0].Y = (int)points[4].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop);
m_stGrp->DrawLines(&pX,pComm,2);
// 准备画笔的箭头.
cap.SetFillState(false);
pX.SetCustomEndCap(&cap);
pX.SetCustomStartCap(&cap);
// Vl -- .P0~P1中点位置开始.到轴线上--双箭头.
pComm[0].X = (int)(points[0].X + points[1].X) / 2;
pComm[0].Y = (int)points[0].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(xAxisOffset);
m_stGrp->DrawLines(&pX,pComm,2);
m_stGrp->DrawString(strList[0].c_bstr(),strList[0].Length(),&font,Gdiplus::PointF(pComm[0].X + 10 ,(pComm[0].Y + pComm[1].Y)/2),&s);
// Vh -- .P2~P3中点位置开始.到轴线上--双箭头.
// 高电平线.
pComm[0].X = (int)(points[2].X + points[3].X) / 2;
pComm[0].Y = (int)points[2].Y;
pComm[1].X = pComm[0].X;
pComm[1].Y = UserY(xAxisOffset);
m_stGrp->DrawLines(&pX,pComm,2);
m_stGrp->DrawString(strList[1].c_bstr(),strList[1].Length(),&font,Gdiplus::PointF(pComm[0].X + 10 ,(pComm[0].Y + pComm[1].Y)/2),&s);
//
#if SHOW_LOWLEVEL
pComm[0].X = points[0].X;
pComm[0].Y = UserY(m_iHeight - yMarginTop - 30);
pComm[1].X = points[1].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop - 30);
m_stGrp->DrawLines(&pX,pComm,2);
m_stGrp->DrawString(strList[5].c_bstr(),strList[5].Length(),&font,Gdiplus::PointF((pComm[0].X + pComm[1].X)/2 -30 , pComm[0].Y + 10 ),&s);
#endif
pComm[0].X = points[1].X;
pComm[0].Y = UserY(m_iHeight - yMarginTop - 40);
pComm[1].X = points[2].X;
pComm[1].Y = UserY(m_iHeight - yMarginTop - 40);
m_stGrp->DrawLines(&pX,pComm,2);
m_stGrp->DrawString(strList[2].c_bstr(),strList[2].Length(),&font,Gdiplus::PointF(pComm[0].X + 5 , pComm[0].Y - 30 ),&s);
pComm[2].X = points[3].X;
pComm[2].Y = UserY(m_iHeight - yMarginTop - 40);
pComm[3].X = points[4].X;
pComm[3].Y = UserY(m_iHeight - yMarginTop - 40);
m_stGrp->DrawLines(&pX,pComm+2,2);
m_stGrp->DrawString(strList[4].c_bstr(),strList[4].Length(),&font,Gdiplus::PointF(pComm[2].X - 30 , pComm[2].Y - 20 ),&s);
pComm[1].Y = pComm[1].Y + 10;
pComm[2].Y = pComm[1].Y;
m_stGrp->DrawLines(&pX,pComm+1,2);
m_stGrp->DrawString(strList[3].c_bstr(),strList[3].Length(),&font,Gdiplus::PointF((pComm[1].X + pComm[2].X)/2 - 30, pComm[2].Y + 15 ),&s);
delete points;
delete pComm;
#undef X(_x)
#undef Y(_y)
}
void CSkinDialog::DrawTitleBar(void){
//获取窗体大小
CRect rtWindow;
GetWindowRect(&rtWindow);
UINT btnHeight = m_bpBtnExt->GetHeight();
UINT btnWidth = m_bpBtnExt->GetWidth();
UINT border = GetSystemMetrics(SM_CXSIZEFRAME);
//确定按钮位置
m_rtBtnExt.right = rtWindow.Width() - 5 - border;
m_rtBtnExt.top = (m_bpTitleBar->GetHeight() - btnHeight)/2 + border;
m_rtBtnExt.left = m_rtBtnExt.right - btnWidth;
m_rtBtnExt.bottom = m_rtBtnExt.top + btnHeight;
m_rtBtnMax.right = m_rtBtnExt.left - 2;
m_rtBtnMax.top = m_rtBtnExt.top;
m_rtBtnMax.left = m_rtBtnMax.right - btnWidth;
m_rtBtnMax.bottom = m_rtBtnExt.bottom;
m_rtBtnMin.right = m_rtBtnMax.left - 2;
m_rtBtnMin.top = m_rtBtnMax.top;
m_rtBtnMin.left = m_rtBtnMin.right - btnWidth;
m_rtBtnMin.bottom = m_rtBtnExt.bottom;
//获取窗体DC
CWindowDC WndDc(this);
//创建Graphics对象
Graphics graph(WndDc.m_hDC);
//绘制边框
TextureBrush Hbrush(m_bpHBorder);
Rect destTRect(0,0,rtWindow.Width(),border);
graph.FillRectangle(&Hbrush,destTRect);
Rect destBRect(0,rtWindow.Height()-border,rtWindow.Width(),border);
graph.FillRectangle(&Hbrush,destBRect);
TextureBrush Vbrush(m_bpVBorder);
Rect destLRect(0,0,border,rtWindow.Height());
graph.FillRectangle(&Vbrush,destLRect);
Rect destRRect(rtWindow.Width()-border,0,border,rtWindow.Height());
graph.FillRectangle(&Vbrush,destRRect);
//绘制标题栏背景
graph.DrawImage(m_bpTitleBar,
border,
border,
(int)(rtWindow.Width()-border),
m_bpTitleBar->GetHeight());
//!ToDo绘制程序图标
WndDc.DrawIcon(2, 2, m_hIcon);
//!ToDo绘制标题栏文字
//设置字体
FontFamily fontFamily(L"Arial");
Font font(&fontFamily, 12, FontStyleBold, UnitPixel);
//设置文字颜色
SolidBrush solidBrush(Color(58, 58, 60));
//位置
PointF pointF(35.0f, 8.0f);
//绘制文字
graph.DrawString(m_strTitle,m_strTitle.GetLength(),&font,pointF,&solidBrush);
//绘制退出按钮
graph.DrawImage(m_bpBtnExt,m_rtBtnExt.left,m_rtBtnExt.top,m_bpBtnExt->GetWidth(),m_bpBtnExt->GetHeight());
//绘制最大化/恢复按钮
if(this->IsZoomed()){
graph.DrawImage(m_bpBtnRes,m_rtBtnMax.left,m_rtBtnMax.top,m_bpBtnRes->GetWidth(),m_bpBtnRes->GetHeight());
}else{
graph.DrawImage(m_bpBtnMax,m_rtBtnMax.left,m_rtBtnMax.top,m_bpBtnMax->GetWidth(),m_bpBtnMax->GetHeight());
}
//绘制最小化按钮
graph.DrawImage(m_bpBtnMin,m_rtBtnMin.left,m_rtBtnMin.top,m_bpBtnMin->GetWidth(),m_bpBtnMin->GetHeight());
}
void CMenuItem::DrawControl(CDC &dc, CRect rcUpdate)
{
int nWidth = m_rc.Width();
int nHeight = m_rc.Height();
if(!m_bUpdate)
{
int nImageCount = m_bSelect ? 6 : 4;
if(m_nImagePicCount != 4)
{
// 如果修改过img-count属性,则用此属性设置的图片个数
nImageCount = m_nImagePicCount;
}
if(m_bIsSeparator)
{
nImageCount = 1;
}
UpdateMemDC(dc, nWidth * nImageCount, nHeight);
// 刷新图片的大小(因为m_bSelect选项有可能在SetBitmap之后有变化)
if(m_pImage != NULL)
{
if(m_bIsPopup && (m_pImagePopupArrow == NULL))
{
m_sizeImage.SetSize(m_pImage->GetWidth() / 2, m_pImage->GetHeight());
}else
{
m_sizeImage.SetSize(m_pImage->GetWidth() / nImageCount, m_pImage->GetHeight());
}
}
Graphics graphics(m_memDC);
CRect rcTemp(0, 0, nWidth, nHeight);
for(int i = 0; i < nImageCount; i++)
{
m_memDC.BitBlt(i * nWidth, 0, nWidth, nHeight, &dc, m_rc.left ,m_rc.top, SRCCOPY);
if(enBSHover == i || (enBSDown == i && !m_bSelect) || enBSHoverDown == i)
{
// 画菜单项背景
if(m_pImageHover != NULL)
{
// 使用拉伸模式属性画图
graphics.DrawImage(m_pImageHover, RectF((Gdiplus::REAL)(i * nWidth+m_nFrameWidth), 0, (Gdiplus::REAL)(nWidth-m_nFrameWidth*2), (Gdiplus::REAL)nHeight),
0, 0, (Gdiplus::REAL)m_sizeHover.cx, (Gdiplus::REAL)m_sizeHover.cy, UnitPixel);
}else
{
// 使用颜色填充
SolidBrush brush(m_clrHover);//Color(254, 71, 156, 235));
graphics.FillRectangle(&brush, i * nWidth+m_nFrameWidth, 0, nWidth-m_nFrameWidth*2, nHeight);
}
}
if(m_pImage != NULL)
{
if(m_bIsSeparator)
{
// 如果是分隔线,则采用平铺方式画图
TextureBrush tileBrush(m_pImage, WrapModeTile);
graphics.FillRectangle(&tileBrush, RectF((Gdiplus::REAL)rcTemp.left, (Gdiplus::REAL)(rcTemp.top + (nHeight - m_sizeImage.cy) / 2), (Gdiplus::REAL)(nWidth-m_nFrameWidth*2), (Gdiplus::REAL)m_sizeImage.cy));
}else
if(m_bIsPopup && (m_pImagePopupArrow == NULL))
{
// 如果是弹出菜单,并且没有设置菜单的箭头图片,则用菜单图片作为右侧的箭头图片
graphics.DrawImage(m_pImage, Rect(rcTemp.right - m_sizeImage.cx - 6, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
(i % 2) * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
}else
{
// 普通菜单项的图片
graphics.DrawImage(m_pImage, Rect(rcTemp.left + (m_nLeft - m_sizeImage.cx) / 2, rcTemp.top + (nHeight - m_sizeImage.cy) / 2, m_sizeImage.cx, m_sizeImage.cy),
i * m_sizeImage.cx, 0, m_sizeImage.cx, m_sizeImage.cy, UnitPixel);
}
}
// 如果是弹出菜单,并且设置了菜单的箭头图片,则画右侧的箭头图片
if(m_bIsPopup && (m_pImagePopupArrow != NULL))
{
graphics.DrawImage(m_pImagePopupArrow, Rect(rcTemp.right - m_sizePopupArrow.cx - 6, rcTemp.top + (nHeight - m_sizePopupArrow.cy) / 2, m_sizePopupArrow.cx, m_sizePopupArrow.cy),
(i % 2) * m_sizePopupArrow.cx, 0, m_sizePopupArrow.cx, m_sizePopupArrow.cy, UnitPixel);
}
rcTemp.OffsetRect(nWidth, 0);
}
if(!m_strTitle.IsEmpty())
{
m_memDC.SetBkMode(TRANSPARENT);
rcTemp.SetRect(0, 0, nWidth, nHeight);
BSTR bsFont = m_strFont.AllocSysString();
FontFamily fontFamily(bsFont);
Font font(&fontFamily, (REAL)m_nFontWidth, m_fontStyle, UnitPixel);
graphics.SetTextRenderingHint( TextRenderingHintClearTypeGridFit );
::SysFreeString(bsFont);
StringFormat strFormat;
strFormat.SetAlignment(StringAlignmentNear);
strFormat.SetFormatFlags( StringFormatFlagsNoWrap | StringFormatFlagsMeasureTrailingSpaces);
Size size = GetTextBounds(font, strFormat, m_strTitle);
CPoint point = GetOriginPoint(nWidth - m_nLeft, nHeight, size.Width, size.Height, m_uAlignment, m_uVAlignment);
for(int i = 0; i < nImageCount; i++)
{
SolidBrush solidBrush(enBSDisable == i ? Color(254, 128, 128, 128) : (enBSHover == i || (enBSDown == i && !m_bSelect) || enBSHoverDown == i ? Color(254, 255, 255, 255) : Color(254, 56, 56, 56)));
RectF rect((Gdiplus::REAL)(m_nLeft + point.x + i * nWidth), (Gdiplus::REAL)point.y, (Gdiplus::REAL)(nWidth - (m_nLeft + point.x)), (Gdiplus::REAL)size.Height);
BSTR bsTitle = m_strTitle.AllocSysString();
graphics.DrawString(bsTitle, (INT)wcslen(bsTitle), &font, rect, &strFormat, &solidBrush);
::SysFreeString(bsTitle);
}
}
}
dc.BitBlt(m_rc.left,m_rc.top, m_rc.Width(), m_rc.Height(), &m_memDC, m_enButtonState * nWidth, 0, SRCCOPY);
}
void CDrawWarn::Draw(CDC* pDC)
{
ASSERT_VALID(this);
CRect rect = m_position;
rect.NormalizeRect();
if(rect.Width() < 10 || rect.Height()<10)
return;
pStrWarn = new STRWARN[m_nColCount];
AddWarn("1","2004/12/12","12:00","高报警","电压过低");
AddWarn("2","2004/12/12","12:00","高报警","电压过低");
AddWarn("3","2004/12/12","12:00","高报警","电压过低");
AddWarn("4","2004/12/12","12:00","高报警","电压过低");
AddWarn("5","2004/12/12","12:00","高报警","电压过低");
AddWarn("6","2004/12/12","12:00","高报警","电压过低");
AddWarn("7","2004/12/12","12:00","高报警","电压过低");
AddWarn("8","2004/12/12","12:00","高报警","电压过低");
AddWarn("9","2004/12/12","12:00","高报警","电压过低");
AddWarn("10","2004/12/12","12:00","高报警","电压过低");
AddWarn("11","2004/12/12","12:00","高报警","电压过低");
AddWarn("12","2004/12/12","12:00","高报警","电压过低");
Rect GdiRect (rect.TopLeft().x,rect.TopLeft().y,rect.Size().cx,rect.Size().cy);
Color crBackColor,crTitleColor,crLineColor,crTextColor ;
crBackColor.SetFromCOLORREF(m_ctlBackColor);
crTitleColor.SetFromCOLORREF(m_ctlTitleColor );
crLineColor.SetFromCOLORREF(m_ctlLineColor);
crTextColor.SetFromCOLORREF(m_ctlTextColor);
Graphics graphics (pDC->m_hDC);
Graphics Textgraphics (pDC->m_hDC);
SolidBrush solidBrush(crBackColor);
SolidBrush TitleBrush(crTitleColor);
SolidBrush TextBrush(crTextColor);
Pen pen(crLineColor,1);
graphics.FillRectangle(&solidBrush,GdiRect);
BSTR bstr = _com_util::ConvertStringToBSTR(m_fontName);
/// WCHAR *fn = new unsigned short[m_fontName.GetLength()+1];;
/// wcscpy(fn,bstr);
FontFamily fontFamily(bstr);
Font font(&fontFamily, m_fontSize, m_fontStyle, UnitPoint);
for(int j =1; j<= m_nColCount; j++)
{
m_nCellWidth = 0;
for(int i=1; i<= m_nRowCount; i++)
{
CRect rc = rect;
if(m_bIsAutoSize)
{
m_nCellWidth = rect.Width()/m_nRowCount;
m_nCellHeight = rect.Height()/m_nColCount;
rc.TopLeft().x += (i-1)*m_nCellWidth;
rc.TopLeft().y += (j-1)*m_nCellHeight;
m_CellRect = CRect(rc.TopLeft(),CSize(m_nCellWidth,m_nCellHeight));
m_CellRect.NormalizeRect();
}
else
{
rc.TopLeft().x += m_nCellWidth;
m_nCellWidth += rect.Width()*m_nPercent[i-1]/100;
m_nCellHeight = rect.Height()/m_nColCount;
rc.TopLeft().y += (j-1)*m_nCellHeight;
m_CellRect = CRect(rc.TopLeft(),CSize(rect.Width()*m_nPercent[i-1]/100,m_nCellHeight));
m_CellRect.NormalizeRect();
}
Rect CellRect(m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
graphics.DrawRectangle(&pen,CellRect);
if(j == m_nColCount) //画标题
{
StringFormat stringFormat;
stringFormat.SetAlignment(StringAlignmentCenter);
stringFormat.SetLineAlignment(StringAlignmentCenter);
stringFormat.SetFormatFlags(StringFormatFlagsDirectionRightToLeft);
stringFormat.SetTrimming(m_trimmingSyle);
CString m_strButton;
if(i == 1)
m_strButton = "点号";
if(i == 2)
m_strButton = "数据";
if(i == 3)
m_strButton = "说明";
if(i == 4)
m_strButton = "报警原因";
if(i == 5)
m_strButton = "时间";
m_strButton.TrimRight();
/// int len = m_strButton.GetLength();
bstr = _com_util::ConvertStringToBSTR(m_strButton);
/// WCHAR *strButton = new unsigned short[len];
/// wcscpy(strButton,bstr);
RectF theRect (m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
Matrix matrix(1,0,0,-1,0,0);
Textgraphics.SetTransform(&matrix);
theRect.Y *=-1;
theRect.Height*=-1;
Normallize (theRect);
Textgraphics.FillRectangle(&TitleBrush,theRect);
Textgraphics.DrawString(bstr,-1,&font, theRect,&stringFormat, &TextBrush);
}
else //画文字
{
StringFormat stringFormat;
stringFormat.SetAlignment(StringAlignmentNear);
stringFormat.SetLineAlignment(StringAlignmentNear);
CString strWarn;
if(i == 1)
strWarn = pStrWarn[j].strPoint;
if(i == 2)
strWarn = pStrWarn[j].strDate;
if(i == 3)
strWarn = pStrWarn[j].strTime;
if(i == 4)
strWarn = pStrWarn[j].strText;
if(i == 5)
strWarn = pStrWarn[j].strWarn;
strWarn.TrimRight();
/// int len = strWarn.GetLength();
bstr = _com_util::ConvertStringToBSTR(strWarn);
/// WCHAR *strButton = new unsigned short[len];
/// wcscpy(strButton,bstr);
RectF theRect (m_CellRect.TopLeft().x,m_CellRect.TopLeft().y,m_CellRect.Size().cx,m_CellRect.Size().cy);
Matrix matrix(1,0,0,-1,0,0);
Textgraphics.SetTransform(&matrix);
theRect.Y *=-1;
theRect.Height*=-1;
Normallize (theRect);
Textgraphics.DrawString(bstr,-1,&font, theRect,&stringFormat, &TextBrush);
}
}
}
graphics.ReleaseHDC(pDC->m_hDC);
}
