int _PopAndUnmarkVerticesAndEdges(graphP theGraph, int Z, int stackBottom) { int V, e; // Pop vertex/edge pairs until all have been popped from the stack, // and all that's left is what was under the pairs, or until... while (sp_GetCurrentSize(theGraph->theStack) > stackBottom) { sp_Pop(theGraph->theStack, V); // If we pop the terminating vertex Z, then put it back and break if (V == Z) { sp_Push(theGraph->theStack, V); break; } // Otherwise, pop the edge part of the vertex/edge pair sp_Pop(theGraph->theStack, e); // Now unmark the vertex and edge (i.e. revert to "unvisited") theGraph->G[V].visited = 0; theGraph->G[e].visited = 0; theGraph->G[gp_GetTwinArc(theGraph, e)].visited = 0; } return OK; }
int _ColorVertices_IdentifyVertices(graphP theGraph, int u, int v, int eBefore) { ColorVerticesContext *context = (ColorVerticesContext *) gp_GetExtension(theGraph, COLORVERTICES_ID); if (context != NULL) { int e_v_last, e_v_first; // First, identify u and v. No point in taking v's degree beforehand // because some of its incident edges may indicate neighbors of u. This // causes v to be moved to a lower degree list than deg(v). if (context->functions.fpIdentifyVertices(theGraph, u, v, eBefore) != OK) return NOTOK; // The edges transferred from v to u are indicated on the top of the // stack, which looks like this after identifying u and v: // ... e_u_succ e_v_last e_v_first e_u_pred u v e_v_first = sp_Get(theGraph->theStack, sp_GetCurrentSize(theGraph->theStack)-4); e_v_last = sp_Get(theGraph->theStack, sp_GetCurrentSize(theGraph->theStack)-5); // We count the number of edges K transferred from v to u after the // common edges were hidden if (gp_IsArc(theGraph, e_v_first)) { int J, K, degu; for (J=e_v_first, K=1; J != e_v_last; J=gp_GetNextArc(theGraph, J)) K++; // Remove v from the degree list K. During IdentifyVertices(), if v had any // common edges with u, they were "hidden", which reduced the degree of v to K. _RemoveVertexFromDegList(context, theGraph, v, K); // We move u from degree list deg(u)-K to degree list deg(u) degu = gp_GetVertexDegree(theGraph, u); _RemoveVertexFromDegList(context, theGraph, u, degu-K); _AddVertexToDegList(context, theGraph, u, degu); } return OK; } return NOTOK; }
int _ColorVertices_RestoreVertex(graphP theGraph) { ColorVerticesContext *context = (ColorVerticesContext *) gp_GetExtension(theGraph, COLORVERTICES_ID); if (context != NULL) { int u, v; // Read the stack to figure out which vertex is being restored u = sp_Get(theGraph->theStack, sp_GetCurrentSize(theGraph->theStack)-2); v = sp_Get(theGraph->theStack, sp_GetCurrentSize(theGraph->theStack)-1); // Restore the vertex if (context->functions.fpRestoreVertex(theGraph) != OK) return NOTOK; // If the restored vertex v was hidden, then give it a color distinct from its neighbors // Note that u is NIL in this case if (u == NIL) { if (_AssignColorToVertex(context, theGraph, v) != OK) return NOTOK; if (context->color[v] < 0) return NOTOK; } // Else if the restored vertex v was identified, then give v the same color as the // vertex u with which it was identified. else { context->color[v] = context->color[u]; } return OK; } return NOTOK; }
void _CollectDrawingData(DrawPlanarContext *context, int RootVertex, int W, int WPrevLink) { graphP theEmbedding = context->theGraph; //int ancestorChild = RootVertex - theEmbedding->N; //int ancestor = theEmbedding->V[ancestorChild].DFSParent; int K, Parent, BicompRoot, DFSChild, direction, descendant; gp_LogLine("\ngraphDrawPlanar.c/_CollectDrawingData() start"); gp_LogLine(gp_MakeLogStr3("_CollectDrawingData(RootVertex=%d, W=%d, W_in=%d)", RootVertex, W, WPrevLink)); /* Process all of the merge points to set their drawing flags. */ for (K = 0; K < sp_GetCurrentSize(theEmbedding->theStack); K += 4) { /* Get the parent and child that are about to be merged from the 4-tuple in the merge stack */ Parent = theEmbedding->theStack->S[K]; BicompRoot = theEmbedding->theStack->S[K+2]; DFSChild = BicompRoot - theEmbedding->N; /* We get the active descendant vertex in the child bicomp that will be adjacent to the parent along the external face. This vertex is guaranteed to be found in one step due to external face 'short-circuiting' that was done in step 'Parent' of the planarity algorithm. We pass theEmbedding->N for the second parameter because of this; we use this function to signify need of extFace links in the other implementation.*/ direction = theEmbedding->theStack->S[K+3]; descendant = _GetNextExternalFaceVertex(theEmbedding, BicompRoot, &direction); /* Now we set the tie flag in the DFS child, and mark the descendant and parent with non-NIL pointers to the child whose tie flag is to be resolved as soon as one of the two is connected to by an edge or child bicomp merge. */ context->V[DFSChild].drawingFlag = DRAWINGFLAG_TIE; context->V[descendant].tie[direction] = DFSChild; direction = theEmbedding->theStack->S[K+1]; context->V[Parent].tie[direction] = DFSChild; gp_LogLine(gp_MakeLogStr5("V[Parent=%d]=.tie[%d] = V[descendant=%d].tie[%d] = (child=%d)", Parent, direction, descendant, theEmbedding->theStack->S[K+3], DFSChild)); } gp_LogLine("graphDrawPlanar.c/_CollectDrawingData() end\n"); }
void SaveAsciiGraph(graphP theGraph, char *filename) { int e, limit; FILE *outfile = fopen(filename, "wt"); fprintf(outfile, "%s\n", filename); limit = theGraph->edgeOffset + 2*(theGraph->M + sp_GetCurrentSize(theGraph->edgeHoles)); for (e = theGraph->edgeOffset; e < limit; e+=2) { if (theGraph->G[e].v != NIL) fprintf(outfile, "%d %d\n", theGraph->G[e].v+1, theGraph->G[e+1].v+1); } fprintf(outfile, "0 0\n"); fclose(outfile); }
int _SortVertices(graphP theGraph) { int I, N, M, e, J, srcPos, dstPos; vertexRec tempV; graphNode tempG; #ifdef PROFILE platform_time start, end; platform_GetTime(start); #endif if (theGraph == NULL) return NOTOK; if (!(theGraph->internalFlags&FLAGS_DFSNUMBERED)) if (gp_CreateDFSTree(theGraph) != OK) return NOTOK; /* Cache number of vertices and edges into local variables */ N = theGraph->N; M = theGraph->M + sp_GetCurrentSize(theGraph->edgeHoles); /* Change labels of edges from v to DFI(v)-- or vice versa Also, if any links go back to locations 0 to n-1, then they need to be changed because we are reordering the vertices */ for (e=0, J=theGraph->edgeOffset; e < M; e++, J+=2) { if (theGraph->G[J].v != NIL) { theGraph->G[J].v = theGraph->G[theGraph->G[J].v].v; theGraph->G[J+1].v = theGraph->G[theGraph->G[J+1].v].v; } } /* Convert DFSParent from v to DFI(v) or vice versa */ for (I=0; I < N; I++) if (theGraph->V[I].DFSParent != NIL) theGraph->V[I].DFSParent = theGraph->G[theGraph->V[I].DFSParent].v; /* Sort by 'v using constant time random access. Move each vertex to its destination 'v', and store its source location in 'v'. */ /* First we clear the visitation flags. We need these to help mark visited vertices because we change the 'v' field to be the source location, so we cannot use index==v as a test for whether the correct vertex is in location 'index'. */ for (I=0; I < N; I++) theGraph->G[I].visited = 0; /* We visit each vertex location, skipping those marked as visited since we've already moved the correct vertex into that location. The inner loop swaps the vertex at location I into the correct position, G[I].v, marks that location as visited, then sets its 'v' field to be the location from whence we obtained the vertex record. */ for (I=0; I < N; I++) { srcPos = I; while (!theGraph->G[I].visited) { dstPos = theGraph->G[I].v; tempG = theGraph->G[dstPos]; tempV = theGraph->V[dstPos]; theGraph->G[dstPos] = theGraph->G[I]; theGraph->V[dstPos] = theGraph->V[I]; theGraph->G[I] = tempG; theGraph->V[I] = tempV; theGraph->G[dstPos].visited = 1; theGraph->G[dstPos].v = srcPos; srcPos = dstPos; } } /* Invert the bit that records the sort order of the graph */ if (theGraph->internalFlags & FLAGS_SORTEDBYDFI) theGraph->internalFlags &= ~FLAGS_SORTEDBYDFI; else theGraph->internalFlags |= FLAGS_SORTEDBYDFI; #ifdef PROFILE platform_GetTime(end); printf("SortVertices in %.3lf seconds.\n", platform_GetDuration(start,end)); #endif return OK; }
int _MarkHighestXYPath(graphP theGraph) { int J, Z; int R, X, Y, W; int stackBottom1, stackBottom2; /* Initialization */ R = theGraph->IC.r; X = theGraph->IC.x; Y = theGraph->IC.y; W = theGraph->IC.w; theGraph->IC.px = theGraph->IC.py = NIL; /* Save the stack bottom before we start hiding internal edges, so we will know how many edges to restore */ stackBottom1 = sp_GetCurrentSize(theGraph->theStack); /* Remove the internal edges incident to vertex R */ if (_HideInternalEdges(theGraph, R) != OK) return NOTOK; /* Now we're going to use the stack to collect the vertices of potential * X-Y paths, so we need to store where the hidden internal edges are * located because we must, at times, pop the collected vertices if * the path being collected doesn't work out. */ stackBottom2 = sp_GetCurrentSize(theGraph->theStack); /* Walk the proper face containing R to find and mark the highest X-Y path. Note that if W is encountered, then there is no intervening X-Y path, so we would return FALSE in that case. */ Z = R; // This setting of J is the arc equivalent of prevLink=1 // As loop progresses, J indicates the arc used to enter Z, not the exit arc J = gp_GetLastArc(theGraph, R); while (theGraph->G[Z].type != VERTEX_HIGH_RYW && theGraph->G[Z].type != VERTEX_LOW_RYW) { /* Advance J and Z along the proper face containing R */ J = gp_GetPrevArcCircular(theGraph, J); Z = theGraph->G[J].v; J = gp_GetTwinArc(theGraph, J); /* If Z is already visited, then pop everything since the last time we visited Z because its all part of a separable component. */ if (theGraph->G[Z].visited) { if (_PopAndUnmarkVerticesAndEdges(theGraph, Z, stackBottom2) != OK) return NOTOK; } /* If we have not visited this vertex before... */ else { /* If we find W, then there is no X-Y path. Never happens for Kuratowski subgraph isolator, but this routine is also used to test for certain X-Y paths. So, we clean up and bail out in that case. */ if (Z == W) { if (_PopAndUnmarkVerticesAndEdges(theGraph, NIL, stackBottom2) != OK) return NOTOK; break; } /* If we found another vertex along the RXW path, then blow off all the vertices we visited so far because they're not part of the obstructing path */ if (theGraph->G[Z].type == VERTEX_HIGH_RXW || theGraph->G[Z].type == VERTEX_LOW_RXW) { theGraph->IC.px = Z; if (_PopAndUnmarkVerticesAndEdges(theGraph, NIL, stackBottom2) != OK) return NOTOK; } /* Push the current vertex onto the stack of vertices visited since the last RXW vertex was encountered */ sp_Push(theGraph->theStack, J); sp_Push(theGraph->theStack, Z); /* Mark the vertex Z as visited as well as its edge of entry (except the entry edge for P_x).*/ theGraph->G[Z].visited = 1; if (Z != theGraph->IC.px) { theGraph->G[J].visited = 1; theGraph->G[gp_GetTwinArc(theGraph, J)].visited = 1; } /* If we found an RYW vertex, then we have successfully finished identifying the highest X-Y path, so we record the point of attachment and break the loop. */ if (theGraph->G[Z].type == VERTEX_HIGH_RYW || theGraph->G[Z].type == VERTEX_LOW_RYW) { theGraph->IC.py = Z; break; } } } /* Remove any remaining vertex-edge pairs on the top of the stack, then Restore the internal edges incident to R that were previously removed. */ sp_SetCurrentSize(theGraph->theStack, stackBottom2); if (_RestoreInternalEdges(theGraph, stackBottom1) != OK) return NOTOK; /* Return the result */ return theGraph->IC.py==NIL ? FALSE : TRUE; }
int _CheckEmbeddingFacialIntegrity(graphP theGraph) { stackP theStack = theGraph->theStack; int EsizeOccupied, v, e, eTwin, eStart, eNext, NumFaces, connectedComponents; if (theGraph == NULL) return NOTOK; /* The stack need only contain 2M entries, one for each edge record. With max M at 3N, this amounts to 6N integers of space. The embedding structure already contains this stack, so we just make sure it starts out empty. */ sp_ClearStack(theStack); /* Push all arcs and set them to unvisited */ EsizeOccupied = gp_EdgeInUseIndexBound(theGraph); for (e = gp_GetFirstEdge(theGraph); e < EsizeOccupied; e+=2) { // Except skip edge holes if (gp_EdgeInUse(theGraph, e)) { sp_Push(theStack, e); gp_ClearEdgeVisited(theGraph, e); eTwin = gp_GetTwinArc(theGraph, e); sp_Push(theStack, eTwin); gp_ClearEdgeVisited(theGraph, eTwin); } } // There are M edges, so we better have pushed 2M arcs just now // i.e. testing that the continue above skipped only edge holes if (sp_GetCurrentSize(theStack) != 2*theGraph->M) return NOTOK; /* Read faces until every arc is used */ NumFaces = 0; while (sp_NonEmpty(theStack)) { /* Get an arc; if it has already been used by a face, then don't use it to traverse a new face */ sp_Pop(theStack, eStart); if (gp_GetEdgeVisited(theGraph, eStart)) continue; e = eStart; do { eNext = gp_GetNextArcCircular(theGraph, gp_GetTwinArc(theGraph, e)); if (gp_GetEdgeVisited(theGraph, eNext)) return NOTOK; gp_SetEdgeVisited(theGraph, eNext); e = eNext; } while (e != eStart); NumFaces++; } /* Count the external face once rather than once per connected component; each connected component is detected by the fact that it has no DFS parent, except in the case of isolated vertices, no face was counted so we do not subtract one. */ connectedComponents = 0; for (v = gp_GetFirstVertex(theGraph); gp_VertexInRange(theGraph, v); v++) { if (gp_IsDFSTreeRoot(theGraph, v)) { if (gp_GetVertexDegree(theGraph, v) > 0) NumFaces--; connectedComponents++; } } NumFaces++; /* Test number of faces using the extended Euler's formula. For connected components, Euler's formula is f=m-n+2, but for disconnected graphs it is extended to f=m-n+1+c where c is the number of connected components.*/ return NumFaces == theGraph->M - theGraph->N + 1 + connectedComponents ? OK : NOTOK; }