int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
enum read_mode mode)
{
struct flash_info *info;
struct flash_platform_data *data;
struct device *dev = nor->dev;
struct mtd_info *mtd = nor->mtd;
struct device_node *np = dev->of_node;
int ret;
int i;
ret = spi_nor_check(nor);
if (ret)
return ret;
/* Platform data helps sort out which chip type we have, as
* well as how this board partitions it. If we don't have
* a chip ID, try the JEDEC id commands; they'll work for most
* newer chips, even if we don't recognize the particular chip.
*/
data = dev_get_platdata(dev);
if (data && data->type) {
const struct spi_device_id *plat_id;
for (i = 0; i < ARRAY_SIZE(spi_nor_ids) - 1; i++) {
plat_id = &spi_nor_ids[i];
if (strcmp(data->type, plat_id->name))
continue;
break;
}
if (i < ARRAY_SIZE(spi_nor_ids) - 1)
id = plat_id;
else
dev_warn(dev, "unrecognized id %s\n", data->type);
}
info = (void *)id->driver_data;
if (info->jedec_id) {
const struct spi_device_id *jid;
jid = jedec_probe(nor);
if (IS_ERR(jid)) {
return PTR_ERR(jid);
} else if (jid != id) {
/*
* JEDEC knows better, so overwrite platform ID. We
* can't trust partitions any longer, but we'll let
* mtd apply them anyway, since some partitions may be
* marked read-only, and we don't want to lose that
* information, even if it's not 100% accurate.
*/
dev_warn(dev, "found %s, expected %s\n",
jid->name, id->name);
id = jid;
info = (void *)jid->driver_data;
}
}
mutex_init(&nor->lock);
/*
* Atmel, SST and Intel/Numonyx serial nor tend to power
* up with the software protection bits set
*/
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
write_enable(nor);
write_sr(nor, 0);
}
if (data && data->name)
mtd->name = data->name;
else
mtd->name = dev_name(dev);
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->size = info->sector_size * info->n_sectors;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
/* nor protection support for STmicro chips */
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
mtd->_lock = spi_nor_lock;
mtd->_unlock = spi_nor_unlock;
}
/* sst nor chips use AAI word program */
if (info->flags & SST_WRITE)
mtd->_write = sst_write;
else
mtd->_write = spi_nor_write;
/* prefer "small sector" erase if possible */
if (info->flags & SECT_4K) {
nor->erase_opcode = SPINOR_OP_BE_4K;
mtd->erasesize = 4096;
} else if (info->flags & SECT_4K_PMC) {
nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
mtd->erasesize = 4096;
} else {
nor->erase_opcode = SPINOR_OP_SE;
mtd->erasesize = info->sector_size;
}
if (info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
nor->page_size = info->page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
nor->flash_read = SPI_NOR_FAST;
else
nor->flash_read = SPI_NOR_NORMAL;
} else {
/* If we weren't instantiated by DT, default to fast-read */
nor->flash_read = SPI_NOR_FAST;
}
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
nor->flash_read = SPI_NOR_NORMAL;
/* Quad/Dual-read mode takes precedence over fast/normal */
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
ret = set_quad_mode(nor, info->jedec_id);
if (ret) {
dev_err(dev, "quad mode not supported\n");
return ret;
}
nor->flash_read = SPI_NOR_QUAD;
} else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
nor->flash_read = SPI_NOR_DUAL;
}
/* Default commands */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
nor->read_opcode = SPINOR_OP_READ_1_1_4;
break;
case SPI_NOR_DUAL:
nor->read_opcode = SPINOR_OP_READ_1_1_2;
break;
case SPI_NOR_FAST:
nor->read_opcode = SPINOR_OP_READ_FAST;
break;
case SPI_NOR_NORMAL:
nor->read_opcode = SPINOR_OP_READ;
break;
default:
dev_err(dev, "No Read opcode defined\n");
return -EINVAL;
}
nor->program_opcode = SPINOR_OP_PP;
if (info->addr_width)
nor->addr_width = info->addr_width;
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
nor->read_opcode = SPINOR_OP_READ4_1_1_4;
break;
case SPI_NOR_DUAL:
nor->read_opcode = SPINOR_OP_READ4_1_1_2;
break;
case SPI_NOR_FAST:
nor->read_opcode = SPINOR_OP_READ4_FAST;
break;
case SPI_NOR_NORMAL:
nor->read_opcode = SPINOR_OP_READ4;
break;
}
nor->program_opcode = SPINOR_OP_PP_4B;
/* No small sector erase for 4-byte command set */
nor->erase_opcode = SPINOR_OP_SE_4B;
mtd->erasesize = info->sector_size;
} else
set_4byte(nor, info->jedec_id, 1);
} else {
nor->addr_width = 3;
}
nor->read_dummy = spi_nor_read_dummy_cycles(nor);
dev_info(dev, "%s (%lld Kbytes)\n", id->name,
(long long)mtd->size >> 10);
dev_dbg(dev,
"mtd .name = %s, .size = 0x%llx (%lldMiB), "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
if (mtd->numeraseregions)
for (i = 0; i < mtd->numeraseregions; i++)
dev_dbg(dev,
"mtd.eraseregions[%d] = { .offset = 0x%llx, "
".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, (long long)mtd->eraseregions[i].offset,
mtd->eraseregions[i].erasesize,
mtd->eraseregions[i].erasesize / 1024,
mtd->eraseregions[i].numblocks);
return 0;
}
int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = nor->flash_node;
int ret;
int i;
ret = spi_nor_check(nor);
if (ret)
return ret;
if (name)
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
info = spi_nor_read_id(nor);
if (IS_ERR_OR_NULL(info))
return -ENOENT;
/*
* If caller has specified name of flash model that can normally be
* detected using JEDEC, let's verify it.
*/
if (name && info->id_len) {
const struct flash_info *jinfo;
jinfo = spi_nor_read_id(nor);
if (IS_ERR(jinfo)) {
return PTR_ERR(jinfo);
} else if (jinfo != info) {
/*
* JEDEC knows better, so overwrite platform ID. We
* can't trust partitions any longer, but we'll let
* mtd apply them anyway, since some partitions may be
* marked read-only, and we don't want to lose that
* information, even if it's not 100% accurate.
*/
dev_warn(dev, "found %s, expected %s\n",
jinfo->name, info->name);
info = jinfo;
}
}
mutex_init(&nor->lock);
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set
*/
if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
JEDEC_MFR(info) == SNOR_MFR_INTEL ||
JEDEC_MFR(info) == SNOR_MFR_SST ||
JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
write_enable(nor);
write_sr(nor, 0);
}
if (!mtd->name)
mtd->name = dev_name(dev);
mtd->priv = nor;
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->size = info->sector_size * info->n_sectors;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
/* NOR protection support for STmicro/Micron chips and similar */
if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
JEDEC_MFR(info) == SNOR_MFR_WINBOND) {
nor->flash_lock = stm_lock;
nor->flash_unlock = stm_unlock;
nor->flash_is_locked = stm_is_locked;
}
if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
mtd->_lock = spi_nor_lock;
mtd->_unlock = spi_nor_unlock;
mtd->_is_locked = spi_nor_is_locked;
}
/* sst nor chips use AAI word program */
if (info->flags & SST_WRITE)
mtd->_write = sst_write;
else
mtd->_write = spi_nor_write;
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
/* prefer "small sector" erase if possible */
if (info->flags & SECT_4K) {
nor->erase_opcode = SPINOR_OP_BE_4K;
mtd->erasesize = 4096;
} else if (info->flags & SECT_4K_PMC) {
nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
mtd->erasesize = 4096;
} else
#endif
{
nor->erase_opcode = SPINOR_OP_SE;
mtd->erasesize = info->sector_size;
}
if (info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
nor->page_size = info->page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
nor->flash_read = SPI_NOR_FAST;
else
nor->flash_read = SPI_NOR_NORMAL;
} else {
/* If we weren't instantiated by DT, default to fast-read */
nor->flash_read = SPI_NOR_FAST;
}
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
nor->flash_read = SPI_NOR_NORMAL;
/* Quad/Dual-read mode takes precedence over fast/normal */
if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
ret = set_quad_mode(nor, info);
if (ret) {
dev_err(dev, "quad mode not supported\n");
return ret;
}
nor->flash_read = SPI_NOR_QUAD;
} else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
nor->flash_read = SPI_NOR_DUAL;
}
/* Default commands */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
nor->read_opcode = SPINOR_OP_READ_1_1_4;
break;
case SPI_NOR_DUAL:
nor->read_opcode = SPINOR_OP_READ_1_1_2;
break;
case SPI_NOR_FAST:
nor->read_opcode = SPINOR_OP_READ_FAST;
break;
case SPI_NOR_NORMAL:
nor->read_opcode = SPINOR_OP_READ;
break;
default:
dev_err(dev, "No Read opcode defined\n");
return -EINVAL;
}
nor->program_opcode = SPINOR_OP_PP;
if (info->addr_width)
nor->addr_width = info->addr_width;
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) {
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
nor->read_opcode = SPINOR_OP_READ4_1_1_4;
break;
case SPI_NOR_DUAL:
nor->read_opcode = SPINOR_OP_READ4_1_1_2;
break;
case SPI_NOR_FAST:
nor->read_opcode = SPINOR_OP_READ4_FAST;
break;
case SPI_NOR_NORMAL:
nor->read_opcode = SPINOR_OP_READ4;
break;
}
nor->program_opcode = SPINOR_OP_PP_4B;
/* No small sector erase for 4-byte command set */
nor->erase_opcode = SPINOR_OP_SE_4B;
mtd->erasesize = info->sector_size;
} else
set_4byte(nor, info, 1);
} else {
nor->addr_width = 3;
}
nor->read_dummy = spi_nor_read_dummy_cycles(nor);
dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
dev_dbg(dev,
"mtd .name = %s, .size = 0x%llx (%lldMiB), "
".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
if (mtd->numeraseregions)
for (i = 0; i < mtd->numeraseregions; i++)
dev_dbg(dev,
"mtd.eraseregions[%d] = { .offset = 0x%llx, "
".erasesize = 0x%.8x (%uKiB), "
".numblocks = %d }\n",
i, (long long)mtd->eraseregions[i].offset,
mtd->eraseregions[i].erasesize,
mtd->eraseregions[i].erasesize / 1024,
mtd->eraseregions[i].numblocks);
return 0;
}
