/* Subroutine */ int sspsv_(char *uplo, integer *n, integer *nrhs, real *ap,
integer *ipiv, real *b, integer *ldb, integer *info)
{
/* -- LAPACK driver routine (version 3.0) --
Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
Courant Institute, Argonne National Lab, and Rice University
March 31, 1993
Purpose
=======
SSPSV computes the solution to a real system of linear equations
A * X = B,
where A is an N-by-N symmetric matrix stored in packed format and X
and B are N-by-NRHS matrices.
The diagonal pivoting method is used to factor A as
A = U * D * U**T, if UPLO = 'U', or
A = L * D * L**T, if UPLO = 'L',
where U (or L) is a product of permutation and unit upper (lower)
triangular matrices, D is symmetric and block diagonal with 1-by-1
and 2-by-2 diagonal blocks. The factored form of A is then used to
solve the system of equations A * X = B.
Arguments
=========
UPLO (input) CHARACTER*1
= 'U': Upper triangle of A is stored;
= 'L': Lower triangle of A is stored.
N (input) INTEGER
The number of linear equations, i.e., the order of the
matrix A. N >= 0.
NRHS (input) INTEGER
The number of right hand sides, i.e., the number of columns
of the matrix B. NRHS >= 0.
AP (input/output) REAL array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
See below for further details.
On exit, the block diagonal matrix D and the multipliers used
to obtain the factor U or L from the factorization
A = U*D*U**T or A = L*D*L**T as computed by SSPTRF, stored as
a packed triangular matrix in the same storage format as A.
IPIV (output) INTEGER array, dimension (N)
Details of the interchanges and the block structure of D, as
determined by SSPTRF. If IPIV(k) > 0, then rows and columns
k and IPIV(k) were interchanged, and D(k,k) is a 1-by-1
diagonal block. If UPLO = 'U' and IPIV(k) = IPIV(k-1) < 0,
then rows and columns k-1 and -IPIV(k) were interchanged and
D(k-1:k,k-1:k) is a 2-by-2 diagonal block. If UPLO = 'L' and
IPIV(k) = IPIV(k+1) < 0, then rows and columns k+1 and
-IPIV(k) were interchanged and D(k:k+1,k:k+1) is a 2-by-2
diagonal block.
B (input/output) REAL array, dimension (LDB,NRHS)
On entry, the N-by-NRHS right hand side matrix B.
On exit, if INFO = 0, the N-by-NRHS solution matrix X.
LDB (input) INTEGER
The leading dimension of the array B. LDB >= max(1,N).
INFO (output) INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value
> 0: if INFO = i, D(i,i) is exactly zero. The factorization
has been completed, but the block diagonal matrix D is
exactly singular, so the solution could not be
computed.
Further Details
===============
The packed storage scheme is illustrated by the following example
when N = 4, UPLO = 'U':
Two-dimensional storage of the symmetric matrix A:
a11 a12 a13 a14
a22 a23 a24
a33 a34 (aij = aji)
a44
Packed storage of the upper triangle of A:
AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ]
=====================================================================
Test the input parameters.
Parameter adjustments */
/* System generated locals */
integer b_dim1, b_offset, i__1;
/* Local variables */
extern logical lsame_(char *, char *);
extern /* Subroutine */ int xerbla_(char *, integer *), ssptrf_(
char *, integer *, real *, integer *, integer *), ssptrs_(
char *, integer *, integer *, real *, integer *, real *, integer *
, integer *);
--ap;
--ipiv;
b_dim1 = *ldb;
b_offset = 1 + b_dim1 * 1;
b -= b_offset;
/* Function Body */
*info = 0;
if (! lsame_(uplo, "U") && ! lsame_(uplo, "L")) {
*info = -1;
} else if (*n < 0) {
*info = -2;
} else if (*nrhs < 0) {
*info = -3;
} else if (*ldb < max(1,*n)) {
*info = -7;
}
if (*info != 0) {
i__1 = -(*info);
xerbla_("SSPSV ", &i__1);
return 0;
}
/* Compute the factorization A = U*D*U' or A = L*D*L'. */
ssptrf_(uplo, n, &ap[1], &ipiv[1], info);
if (*info == 0) {
/* Solve the system A*X = B, overwriting B with X. */
ssptrs_(uplo, n, nrhs, &ap[1], &ipiv[1], &b[b_offset], ldb, info);
}
return 0;
/* End of SSPSV */
} /* sspsv_ */
/* Subroutine */ int schksp_(logical *dotype, integer *nn, integer *nval,
integer *nns, integer *nsval, real *thresh, logical *tsterr, integer *
nmax, real *a, real *afac, real *ainv, real *b, real *x, real *xact,
real *work, real *rwork, integer *iwork, integer *nout)
{
/* Initialized data */
static integer iseedy[4] = { 1988,1989,1990,1991 };
static char uplos[1*2] = "U" "L";
/* Format strings */
static char fmt_9999[] = "(\002 UPLO = '\002,a1,\002', N =\002,i5,\002, "
"type \002,i2,\002, test \002,i2,\002, ratio =\002,g12.5)";
static char fmt_9998[] = "(\002 UPLO = '\002,a1,\002', N =\002,i5,\002, "
"NRHS=\002,i3,\002, type \002,i2,\002, test(\002,i2,\002) =\002,g"
"12.5)";
/* System generated locals */
integer i__1, i__2, i__3, i__4;
/* Builtin functions */
/* Subroutine */ int s_copy(char *, char *, ftnlen, ftnlen);
integer s_wsfe(cilist *), do_fio(integer *, char *, ftnlen), e_wsfe(void);
/* Local variables */
integer i__, j, k, n, i1, i2, in, kl, ku, nt, lda, npp, ioff, mode, imat,
info;
char path[3], dist[1];
integer irhs, nrhs;
char uplo[1], type__[1];
integer nrun;
extern /* Subroutine */ int alahd_(integer *, char *);
integer nfail, iseed[4];
extern logical lsame_(char *, char *);
real rcond;
extern /* Subroutine */ int sget04_(integer *, integer *, real *, integer
*, real *, integer *, real *, real *);
integer nimat;
extern doublereal sget06_(real *, real *);
real anorm;
integer iuplo, izero, nerrs;
extern /* Subroutine */ int sppt02_(char *, integer *, integer *, real *,
real *, integer *, real *, integer *, real *, real *),
scopy_(integer *, real *, integer *, real *, integer *), sppt03_(
char *, integer *, real *, real *, real *, integer *, real *,
real *, real *), sppt05_(char *, integer *, integer *,
real *, real *, integer *, real *, integer *, real *, integer *,
real *, real *, real *), sspt01_(char *, integer *, real *
, real *, integer *, real *, integer *, real *, real *);
logical zerot;
char xtype[1];
extern /* Subroutine */ int slatb4_(char *, integer *, integer *, integer
*, char *, integer *, integer *, real *, integer *, real *, char *
), alaerh_(char *, char *, integer *,
integer *, char *, integer *, integer *, integer *, integer *,
integer *, integer *, integer *, integer *, integer *);
real rcondc;
char packit[1];
extern /* Subroutine */ int alasum_(char *, integer *, integer *, integer
*, integer *);
real cndnum;
logical trfcon;
extern /* Subroutine */ int slacpy_(char *, integer *, integer *, real *,
integer *, real *, integer *), slarhs_(char *, char *,
char *, char *, integer *, integer *, integer *, integer *,
integer *, real *, integer *, real *, integer *, real *, integer *
, integer *, integer *);
extern doublereal slansp_(char *, char *, integer *, real *, real *);
extern /* Subroutine */ int slatms_(integer *, integer *, char *, integer
*, char *, real *, integer *, real *, real *, integer *, integer *
, char *, real *, integer *, real *, integer *), sspcon_(char *, integer *, real *, integer *, real *,
real *, real *, integer *, integer *);
real result[8];
extern /* Subroutine */ int ssprfs_(char *, integer *, integer *, real *,
real *, integer *, real *, integer *, real *, integer *, real *,
real *, real *, integer *, integer *), ssptrf_(char *,
integer *, real *, integer *, integer *), ssptri_(char *,
integer *, real *, integer *, real *, integer *), serrsy_(
char *, integer *), ssptrs_(char *, integer *, integer *,
real *, integer *, real *, integer *, integer *);
/* Fortran I/O blocks */
static cilist io___38 = { 0, 0, 0, fmt_9999, 0 };
static cilist io___41 = { 0, 0, 0, fmt_9998, 0 };
static cilist io___43 = { 0, 0, 0, fmt_9999, 0 };
/* -- LAPACK test routine (version 3.1) -- */
/* Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd.. */
/* November 2006 */
/* .. Scalar Arguments .. */
/* .. */
/* .. Array Arguments .. */
/* .. */
/* Purpose */
/* ======= */
/* SCHKSP tests SSPTRF, -TRI, -TRS, -RFS, and -CON */
/* Arguments */
/* ========= */
/* DOTYPE (input) LOGICAL array, dimension (NTYPES) */
/* The matrix types to be used for testing. Matrices of type j */
/* (for 1 <= j <= NTYPES) are used for testing if DOTYPE(j) = */
/* .TRUE.; if DOTYPE(j) = .FALSE., then type j is not used. */
/* NN (input) INTEGER */
/* The number of values of N contained in the vector NVAL. */
/* NVAL (input) INTEGER array, dimension (NN) */
/* The values of the matrix dimension N. */
/* NNS (input) INTEGER */
/* The number of values of NRHS contained in the vector NSVAL. */
/* NSVAL (input) INTEGER array, dimension (NNS) */
/* The values of the number of right hand sides NRHS. */
/* THRESH (input) REAL */
/* The threshold value for the test ratios. A result is */
/* included in the output file if RESULT >= THRESH. To have */
/* every test ratio printed, use THRESH = 0. */
/* TSTERR (input) LOGICAL */
/* Flag that indicates whether error exits are to be tested. */
/* NMAX (input) INTEGER */
/* The maximum value permitted for N, used in dimensioning the */
/* work arrays. */
/* A (workspace) REAL array, dimension */
/* (NMAX*(NMAX+1)/2) */
/* AFAC (workspace) REAL array, dimension */
/* (NMAX*(NMAX+1)/2) */
/* AINV (workspace) REAL array, dimension */
/* (NMAX*(NMAX+1)/2) */
/* B (workspace) REAL array, dimension (NMAX*NSMAX) */
/* where NSMAX is the largest entry in NSVAL. */
/* X (workspace) REAL array, dimension (NMAX*NSMAX) */
/* XACT (workspace) REAL array, dimension (NMAX*NSMAX) */
/* WORK (workspace) REAL array, dimension */
/* (NMAX*max(2,NSMAX)) */
/* RWORK (workspace) REAL array, */
/* dimension (NMAX+2*NSMAX) */
/* IWORK (workspace) INTEGER array, dimension (2*NMAX) */
/* NOUT (input) INTEGER */
/* The unit number for output. */
/* ===================================================================== */
/* .. Parameters .. */
/* .. */
/* .. Local Scalars .. */
/* .. */
/* .. Local Arrays .. */
/* .. */
/* .. External Functions .. */
/* .. */
/* .. External Subroutines .. */
/* .. */
/* .. Intrinsic Functions .. */
/* .. */
/* .. Scalars in Common .. */
/* .. */
/* .. Common blocks .. */
/* .. */
/* .. Data statements .. */
/* Parameter adjustments */
--iwork;
--rwork;
--work;
--xact;
--x;
--b;
--ainv;
--afac;
--a;
--nsval;
--nval;
--dotype;
/* Function Body */
/* .. */
/* .. Executable Statements .. */
/* Initialize constants and the random number seed. */
s_copy(path, "Single precision", (ftnlen)1, (ftnlen)16);
s_copy(path + 1, "SP", (ftnlen)2, (ftnlen)2);
nrun = 0;
nfail = 0;
nerrs = 0;
for (i__ = 1; i__ <= 4; ++i__) {
iseed[i__ - 1] = iseedy[i__ - 1];
/* L10: */
}
/* Test the error exits */
if (*tsterr) {
serrsy_(path, nout);
}
infoc_1.infot = 0;
/* Do for each value of N in NVAL */
i__1 = *nn;
for (in = 1; in <= i__1; ++in) {
n = nval[in];
lda = max(n,1);
*(unsigned char *)xtype = 'N';
nimat = 10;
if (n <= 0) {
nimat = 1;
}
izero = 0;
i__2 = nimat;
for (imat = 1; imat <= i__2; ++imat) {
/* Do the tests only if DOTYPE( IMAT ) is true. */
if (! dotype[imat]) {
goto L160;
}
/* Skip types 3, 4, 5, or 6 if the matrix size is too small. */
zerot = imat >= 3 && imat <= 6;
if (zerot && n < imat - 2) {
goto L160;
}
/* Do first for UPLO = 'U', then for UPLO = 'L' */
for (iuplo = 1; iuplo <= 2; ++iuplo) {
*(unsigned char *)uplo = *(unsigned char *)&uplos[iuplo - 1];
if (lsame_(uplo, "U")) {
*(unsigned char *)packit = 'C';
} else {
*(unsigned char *)packit = 'R';
}
/* Set up parameters with SLATB4 and generate a test matrix */
/* with SLATMS. */
slatb4_(path, &imat, &n, &n, type__, &kl, &ku, &anorm, &mode,
&cndnum, dist);
s_copy(srnamc_1.srnamt, "SLATMS", (ftnlen)6, (ftnlen)6);
slatms_(&n, &n, dist, iseed, type__, &rwork[1], &mode, &
cndnum, &anorm, &kl, &ku, packit, &a[1], &lda, &work[
1], &info);
/* Check error code from SLATMS. */
if (info != 0) {
alaerh_(path, "SLATMS", &info, &c__0, uplo, &n, &n, &c_n1,
&c_n1, &c_n1, &imat, &nfail, &nerrs, nout);
goto L150;
}
/* For types 3-6, zero one or more rows and columns of */
/* the matrix to test that INFO is returned correctly. */
if (zerot) {
if (imat == 3) {
izero = 1;
} else if (imat == 4) {
izero = n;
} else {
izero = n / 2 + 1;
}
if (imat < 6) {
/* Set row and column IZERO to zero. */
if (iuplo == 1) {
ioff = (izero - 1) * izero / 2;
i__3 = izero - 1;
for (i__ = 1; i__ <= i__3; ++i__) {
a[ioff + i__] = 0.f;
/* L20: */
}
ioff += izero;
i__3 = n;
for (i__ = izero; i__ <= i__3; ++i__) {
a[ioff] = 0.f;
ioff += i__;
/* L30: */
}
} else {
ioff = izero;
i__3 = izero - 1;
for (i__ = 1; i__ <= i__3; ++i__) {
a[ioff] = 0.f;
ioff = ioff + n - i__;
/* L40: */
}
ioff -= izero;
i__3 = n;
for (i__ = izero; i__ <= i__3; ++i__) {
a[ioff + i__] = 0.f;
/* L50: */
}
}
} else {
ioff = 0;
if (iuplo == 1) {
/* Set the first IZERO rows and columns to zero. */
i__3 = n;
for (j = 1; j <= i__3; ++j) {
i2 = min(j,izero);
i__4 = i2;
for (i__ = 1; i__ <= i__4; ++i__) {
a[ioff + i__] = 0.f;
/* L60: */
}
ioff += j;
/* L70: */
}
} else {
/* Set the last IZERO rows and columns to zero. */
i__3 = n;
for (j = 1; j <= i__3; ++j) {
i1 = max(j,izero);
i__4 = n;
for (i__ = i1; i__ <= i__4; ++i__) {
a[ioff + i__] = 0.f;
/* L80: */
}
ioff = ioff + n - j;
/* L90: */
}
}
}
} else {
izero = 0;
}
/* Compute the L*D*L' or U*D*U' factorization of the matrix. */
npp = n * (n + 1) / 2;
scopy_(&npp, &a[1], &c__1, &afac[1], &c__1);
s_copy(srnamc_1.srnamt, "SSPTRF", (ftnlen)6, (ftnlen)6);
ssptrf_(uplo, &n, &afac[1], &iwork[1], &info);
/* Adjust the expected value of INFO to account for */
/* pivoting. */
k = izero;
if (k > 0) {
L100:
if (iwork[k] < 0) {
if (iwork[k] != -k) {
k = -iwork[k];
goto L100;
}
} else if (iwork[k] != k) {
k = iwork[k];
goto L100;
}
}
/* Check error code from SSPTRF. */
if (info != k) {
alaerh_(path, "SSPTRF", &info, &k, uplo, &n, &n, &c_n1, &
c_n1, &c_n1, &imat, &nfail, &nerrs, nout);
}
if (info != 0) {
trfcon = TRUE_;
} else {
trfcon = FALSE_;
}
/* + TEST 1 */
/* Reconstruct matrix from factors and compute residual. */
sspt01_(uplo, &n, &a[1], &afac[1], &iwork[1], &ainv[1], &lda,
&rwork[1], result);
nt = 1;
/* + TEST 2 */
/* Form the inverse and compute the residual. */
if (! trfcon) {
scopy_(&npp, &afac[1], &c__1, &ainv[1], &c__1);
s_copy(srnamc_1.srnamt, "SSPTRI", (ftnlen)6, (ftnlen)6);
ssptri_(uplo, &n, &ainv[1], &iwork[1], &work[1], &info);
/* Check error code from SSPTRI. */
if (info != 0) {
alaerh_(path, "SSPTRI", &info, &c__0, uplo, &n, &n, &
c_n1, &c_n1, &c_n1, &imat, &nfail, &nerrs,
nout);
}
sppt03_(uplo, &n, &a[1], &ainv[1], &work[1], &lda, &rwork[
1], &rcondc, &result[1]);
nt = 2;
}
/* Print information about the tests that did not pass */
/* the threshold. */
i__3 = nt;
for (k = 1; k <= i__3; ++k) {
if (result[k - 1] >= *thresh) {
if (nfail == 0 && nerrs == 0) {
alahd_(nout, path);
}
io___38.ciunit = *nout;
s_wsfe(&io___38);
do_fio(&c__1, uplo, (ftnlen)1);
do_fio(&c__1, (char *)&n, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&imat, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&k, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&result[k - 1], (ftnlen)sizeof(
real));
e_wsfe();
++nfail;
}
/* L110: */
}
nrun += nt;
/* Do only the condition estimate if INFO is not 0. */
if (trfcon) {
rcondc = 0.f;
goto L140;
}
i__3 = *nns;
for (irhs = 1; irhs <= i__3; ++irhs) {
nrhs = nsval[irhs];
/* + TEST 3 */
/* Solve and compute residual for A * X = B. */
s_copy(srnamc_1.srnamt, "SLARHS", (ftnlen)6, (ftnlen)6);
slarhs_(path, xtype, uplo, " ", &n, &n, &kl, &ku, &nrhs, &
a[1], &lda, &xact[1], &lda, &b[1], &lda, iseed, &
info);
slacpy_("Full", &n, &nrhs, &b[1], &lda, &x[1], &lda);
s_copy(srnamc_1.srnamt, "SSPTRS", (ftnlen)6, (ftnlen)6);
ssptrs_(uplo, &n, &nrhs, &afac[1], &iwork[1], &x[1], &lda,
&info);
/* Check error code from SSPTRS. */
if (info != 0) {
alaerh_(path, "SSPTRS", &info, &c__0, uplo, &n, &n, &
c_n1, &c_n1, &nrhs, &imat, &nfail, &nerrs,
nout);
}
slacpy_("Full", &n, &nrhs, &b[1], &lda, &work[1], &lda);
sppt02_(uplo, &n, &nrhs, &a[1], &x[1], &lda, &work[1], &
lda, &rwork[1], &result[2]);
/* + TEST 4 */
/* Check solution from generated exact solution. */
sget04_(&n, &nrhs, &x[1], &lda, &xact[1], &lda, &rcondc, &
result[3]);
/* + TESTS 5, 6, and 7 */
/* Use iterative refinement to improve the solution. */
s_copy(srnamc_1.srnamt, "SSPRFS", (ftnlen)6, (ftnlen)6);
ssprfs_(uplo, &n, &nrhs, &a[1], &afac[1], &iwork[1], &b[1]
, &lda, &x[1], &lda, &rwork[1], &rwork[nrhs + 1],
&work[1], &iwork[n + 1], &info);
/* Check error code from SSPRFS. */
if (info != 0) {
alaerh_(path, "SSPRFS", &info, &c__0, uplo, &n, &n, &
c_n1, &c_n1, &nrhs, &imat, &nfail, &nerrs,
nout);
}
sget04_(&n, &nrhs, &x[1], &lda, &xact[1], &lda, &rcondc, &
result[4]);
sppt05_(uplo, &n, &nrhs, &a[1], &b[1], &lda, &x[1], &lda,
&xact[1], &lda, &rwork[1], &rwork[nrhs + 1], &
result[5]);
/* Print information about the tests that did not pass */
/* the threshold. */
for (k = 3; k <= 7; ++k) {
if (result[k - 1] >= *thresh) {
if (nfail == 0 && nerrs == 0) {
alahd_(nout, path);
}
io___41.ciunit = *nout;
s_wsfe(&io___41);
do_fio(&c__1, uplo, (ftnlen)1);
do_fio(&c__1, (char *)&n, (ftnlen)sizeof(integer))
;
do_fio(&c__1, (char *)&nrhs, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&imat, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&k, (ftnlen)sizeof(integer))
;
do_fio(&c__1, (char *)&result[k - 1], (ftnlen)
sizeof(real));
e_wsfe();
++nfail;
}
/* L120: */
}
nrun += 5;
/* L130: */
}
/* + TEST 8 */
/* Get an estimate of RCOND = 1/CNDNUM. */
L140:
anorm = slansp_("1", uplo, &n, &a[1], &rwork[1]);
s_copy(srnamc_1.srnamt, "SSPCON", (ftnlen)6, (ftnlen)6);
sspcon_(uplo, &n, &afac[1], &iwork[1], &anorm, &rcond, &work[
1], &iwork[n + 1], &info);
/* Check error code from SSPCON. */
if (info != 0) {
alaerh_(path, "SSPCON", &info, &c__0, uplo, &n, &n, &c_n1,
&c_n1, &c_n1, &imat, &nfail, &nerrs, nout);
}
result[7] = sget06_(&rcond, &rcondc);
/* Print the test ratio if it is .GE. THRESH. */
if (result[7] >= *thresh) {
if (nfail == 0 && nerrs == 0) {
alahd_(nout, path);
}
io___43.ciunit = *nout;
s_wsfe(&io___43);
do_fio(&c__1, uplo, (ftnlen)1);
do_fio(&c__1, (char *)&n, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&imat, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&c__8, (ftnlen)sizeof(integer));
do_fio(&c__1, (char *)&result[7], (ftnlen)sizeof(real));
e_wsfe();
++nfail;
}
++nrun;
L150:
;
}
L160:
;
}
/* L170: */
}
/* Print a summary of the results. */
alasum_(path, nout, &nfail, &nrun, &nerrs);
return 0;
/* End of SCHKSP */
} /* schksp_ */
int sspsvx_(char *fact, char *uplo, int *n, int *
nrhs, float *ap, float *afp, int *ipiv, float *b, int *ldb, float
*x, int *ldx, float *rcond, float *ferr, float *berr, float *work,
int *iwork, int *info)
{
/* System generated locals */
int b_dim1, b_offset, x_dim1, x_offset, i__1;
/* Local variables */
extern int lsame_(char *, char *);
float anorm;
extern int scopy_(int *, float *, int *, float *,
int *);
extern double slamch_(char *);
int nofact;
extern int xerbla_(char *, int *), slacpy_(
char *, int *, int *, float *, int *, float *, int *
);
extern double slansp_(char *, char *, int *, float *, float *);
extern int sspcon_(char *, int *, float *, int *,
float *, float *, float *, int *, int *), ssprfs_(
char *, int *, int *, float *, float *, int *, float *,
int *, float *, int *, float *, float *, float *, int *,
int *), ssptrf_(char *, int *, float *, int *,
int *), ssptrs_(char *, int *, int *, float *,
int *, float *, int *, int *);
/* -- LAPACK driver routine (version 3.2) -- */
/* Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd.. */
/* November 2006 */
/* .. Scalar Arguments .. */
/* .. */
/* .. Array Arguments .. */
/* .. */
/* Purpose */
/* ======= */
/* SSPSVX uses the diagonal pivoting factorization A = U*D*U**T or */
/* A = L*D*L**T to compute the solution to a float system of linear */
/* equations A * X = B, where A is an N-by-N symmetric matrix stored */
/* in packed format and X and B are N-by-NRHS matrices. */
/* Error bounds on the solution and a condition estimate are also */
/* provided. */
/* Description */
/* =========== */
/* The following steps are performed: */
/* 1. If FACT = 'N', the diagonal pivoting method is used to factor A as */
/* A = U * D * U**T, if UPLO = 'U', or */
/* A = L * D * L**T, if UPLO = 'L', */
/* where U (or L) is a product of permutation and unit upper (lower) */
/* triangular matrices and D is symmetric and block diagonal with */
/* 1-by-1 and 2-by-2 diagonal blocks. */
/* 2. If some D(i,i)=0, so that D is exactly singular, then the routine */
/* returns with INFO = i. Otherwise, the factored form of A is used */
/* to estimate the condition number of the matrix A. If the */
/* reciprocal of the condition number is less than machine precision, */
/* INFO = N+1 is returned as a warning, but the routine still goes on */
/* to solve for X and compute error bounds as described below. */
/* 3. The system of equations is solved for X using the factored form */
/* of A. */
/* 4. Iterative refinement is applied to improve the computed solution */
/* matrix and calculate error bounds and backward error estimates */
/* for it. */
/* Arguments */
/* ========= */
/* FACT (input) CHARACTER*1 */
/* Specifies whether or not the factored form of A has been */
/* supplied on entry. */
/* = 'F': On entry, AFP and IPIV contain the factored form of */
/* A. AP, AFP and IPIV will not be modified. */
/* = 'N': The matrix A will be copied to AFP and factored. */
/* UPLO (input) CHARACTER*1 */
/* = 'U': Upper triangle of A is stored; */
/* = 'L': Lower triangle of A is stored. */
/* N (input) INTEGER */
/* The number of linear equations, i.e., the order of the */
/* matrix A. N >= 0. */
/* NRHS (input) INTEGER */
/* The number of right hand sides, i.e., the number of columns */
/* of the matrices B and X. NRHS >= 0. */
/* AP (input) REAL array, dimension (N*(N+1)/2) */
/* The upper or lower triangle of the symmetric matrix A, packed */
/* columnwise in a linear array. The j-th column of A is stored */
/* in the array AP as follows: */
/* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j; */
/* if UPLO = 'L', AP(i + (j-1)*(2*n-j)/2) = A(i,j) for j<=i<=n. */
/* See below for further details. */
/* AFP (input or output) REAL array, dimension */
/* (N*(N+1)/2) */
/* If FACT = 'F', then AFP is an input argument and on entry */
/* contains the block diagonal matrix D and the multipliers used */
/* to obtain the factor U or L from the factorization */
/* A = U*D*U**T or A = L*D*L**T as computed by SSPTRF, stored as */
/* a packed triangular matrix in the same storage format as A. */
/* If FACT = 'N', then AFP is an output argument and on exit */
/* contains the block diagonal matrix D and the multipliers used */
/* to obtain the factor U or L from the factorization */
/* A = U*D*U**T or A = L*D*L**T as computed by SSPTRF, stored as */
/* a packed triangular matrix in the same storage format as A. */
/* IPIV (input or output) INTEGER array, dimension (N) */
/* If FACT = 'F', then IPIV is an input argument and on entry */
/* contains details of the interchanges and the block structure */
/* of D, as determined by SSPTRF. */
/* If IPIV(k) > 0, then rows and columns k and IPIV(k) were */
/* interchanged and D(k,k) is a 1-by-1 diagonal block. */
/* If UPLO = 'U' and IPIV(k) = IPIV(k-1) < 0, then rows and */
/* columns k-1 and -IPIV(k) were interchanged and D(k-1:k,k-1:k) */
/* is a 2-by-2 diagonal block. If UPLO = 'L' and IPIV(k) = */
/* IPIV(k+1) < 0, then rows and columns k+1 and -IPIV(k) were */
/* interchanged and D(k:k+1,k:k+1) is a 2-by-2 diagonal block. */
/* If FACT = 'N', then IPIV is an output argument and on exit */
/* contains details of the interchanges and the block structure */
/* of D, as determined by SSPTRF. */
/* B (input) REAL array, dimension (LDB,NRHS) */
/* The N-by-NRHS right hand side matrix B. */
/* LDB (input) INTEGER */
/* The leading dimension of the array B. LDB >= MAX(1,N). */
/* X (output) REAL array, dimension (LDX,NRHS) */
/* If INFO = 0 or INFO = N+1, the N-by-NRHS solution matrix X. */
/* LDX (input) INTEGER */
/* The leading dimension of the array X. LDX >= MAX(1,N). */
/* RCOND (output) REAL */
/* The estimate of the reciprocal condition number of the matrix */
/* A. If RCOND is less than the machine precision (in */
/* particular, if RCOND = 0), the matrix is singular to working */
/* precision. This condition is indicated by a return code of */
/* INFO > 0. */
/* FERR (output) REAL array, dimension (NRHS) */
/* The estimated forward error bound for each solution vector */
/* X(j) (the j-th column of the solution matrix X). */
/* If XTRUE is the true solution corresponding to X(j), FERR(j) */
/* is an estimated upper bound for the magnitude of the largest */
/* element in (X(j) - XTRUE) divided by the magnitude of the */
/* largest element in X(j). The estimate is as reliable as */
/* the estimate for RCOND, and is almost always a slight */
/* overestimate of the true error. */
/* BERR (output) REAL array, dimension (NRHS) */
/* The componentwise relative backward error of each solution */
/* vector X(j) (i.e., the smallest relative change in */
/* any element of A or B that makes X(j) an exact solution). */
/* WORK (workspace) REAL array, dimension (3*N) */
/* IWORK (workspace) INTEGER array, dimension (N) */
/* INFO (output) INTEGER */
/* = 0: successful exit */
/* < 0: if INFO = -i, the i-th argument had an illegal value */
/* > 0: if INFO = i, and i is */
/* <= N: D(i,i) is exactly zero. The factorization */
/* has been completed but the factor D is exactly */
/* singular, so the solution and error bounds could */
/* not be computed. RCOND = 0 is returned. */
/* = N+1: D is nonsingular, but RCOND is less than machine */
/* precision, meaning that the matrix is singular */
/* to working precision. Nevertheless, the */
/* solution and error bounds are computed because */
/* there are a number of situations where the */
/* computed solution can be more accurate than the */
/* value of RCOND would suggest. */
/* Further Details */
/* =============== */
/* The packed storage scheme is illustrated by the following example */
/* when N = 4, UPLO = 'U': */
/* Two-dimensional storage of the symmetric matrix A: */
/* a11 a12 a13 a14 */
/* a22 a23 a24 */
/* a33 a34 (aij = aji) */
/* a44 */
/* Packed storage of the upper triangle of A: */
/* AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ] */
/* ===================================================================== */
/* .. Parameters .. */
/* .. */
/* .. Local Scalars .. */
/* .. */
/* .. External Functions .. */
/* .. */
/* .. External Subroutines .. */
/* .. */
/* .. Intrinsic Functions .. */
/* .. */
/* .. Executable Statements .. */
/* Test the input parameters. */
/* Parameter adjustments */
--ap;
--afp;
--ipiv;
b_dim1 = *ldb;
b_offset = 1 + b_dim1;
b -= b_offset;
x_dim1 = *ldx;
x_offset = 1 + x_dim1;
x -= x_offset;
--ferr;
--berr;
--work;
--iwork;
/* Function Body */
*info = 0;
nofact = lsame_(fact, "N");
if (! nofact && ! lsame_(fact, "F")) {
*info = -1;
} else if (! lsame_(uplo, "U") && ! lsame_(uplo,
"L")) {
*info = -2;
} else if (*n < 0) {
*info = -3;
} else if (*nrhs < 0) {
*info = -4;
} else if (*ldb < MAX(1,*n)) {
*info = -9;
} else if (*ldx < MAX(1,*n)) {
*info = -11;
}
if (*info != 0) {
i__1 = -(*info);
xerbla_("SSPSVX", &i__1);
return 0;
}
if (nofact) {
/* Compute the factorization A = U*D*U' or A = L*D*L'. */
i__1 = *n * (*n + 1) / 2;
scopy_(&i__1, &ap[1], &c__1, &afp[1], &c__1);
ssptrf_(uplo, n, &afp[1], &ipiv[1], info);
/* Return if INFO is non-zero. */
if (*info > 0) {
*rcond = 0.f;
return 0;
}
}
/* Compute the norm of the matrix A. */
anorm = slansp_("I", uplo, n, &ap[1], &work[1]);
/* Compute the reciprocal of the condition number of A. */
sspcon_(uplo, n, &afp[1], &ipiv[1], &anorm, rcond, &work[1], &iwork[1],
info);
/* Compute the solution vectors X. */
slacpy_("Full", n, nrhs, &b[b_offset], ldb, &x[x_offset], ldx);
ssptrs_(uplo, n, nrhs, &afp[1], &ipiv[1], &x[x_offset], ldx, info);
/* Use iterative refinement to improve the computed solutions and */
/* compute error bounds and backward error estimates for them. */
ssprfs_(uplo, n, nrhs, &ap[1], &afp[1], &ipiv[1], &b[b_offset], ldb, &x[
x_offset], ldx, &ferr[1], &berr[1], &work[1], &iwork[1], info);
/* Set INFO = N+1 if the matrix is singular to working precision. */
if (*rcond < slamch_("Epsilon")) {
*info = *n + 1;
}
return 0;
/* End of SSPSVX */
} /* sspsvx_ */
/* Subroutine */ int sdrvsp_(logical *dotype, integer *nn, integer *nval,
integer *nrhs, real *thresh, logical *tsterr, integer *nmax, real *a,
real *afac, real *ainv, real *b, real *x, real *xact, real *work,
real *rwork, integer *iwork, integer *nout)
{
/* Initialized data */
static integer iseedy[4] = { 1988,1989,1990,1991 };
static char facts[1*2] = "F" "N";
/* Format strings */
static char fmt_9999[] = "(1x,a6,\002, UPLO='\002,a1,\002', N =\002,i5"
",\002, type \002,i2,\002, test \002,i2,\002, ratio =\002,g12.5)";
static char fmt_9998[] = "(1x,a6,\002, FACT='\002,a1,\002', UPLO='\002,a"
"1,\002', N =\002,i5,\002, type \002,i2,\002, test \002,i2,\002, "
"ratio =\002,g12.5)";
/* System generated locals */
address a__1[2];
integer i__1, i__2, i__3, i__4, i__5[2];
char ch__1[2];
/* Builtin functions
Subroutine */ int s_copy(char *, char *, ftnlen, ftnlen);
integer s_wsfe(cilist *), do_fio(integer *, char *, ftnlen), e_wsfe(void);
/* Subroutine */ int s_cat(char *, char **, integer *, integer *, ftnlen);
/* Local variables */
static char fact[1];
static integer ioff, mode, imat, info;
static char path[3], dist[1], uplo[1], type__[1];
static integer nrun, i__, j, k, n, ifact, nfail, iseed[4];
static real rcond;
extern /* Subroutine */ int sget04_(integer *, integer *, real *, integer
*, real *, integer *, real *, real *);
static integer nimat;
extern doublereal sget06_(real *, real *);
static real anorm;
static integer iuplo, izero, i1, i2, k1, lwork, nerrs;
extern /* Subroutine */ int scopy_(integer *, real *, integer *, real *,
integer *), sppt02_(char *, integer *, integer *, real *, real *,
integer *, real *, integer *, real *, real *), sppt05_(
char *, integer *, integer *, real *, real *, integer *, real *,
integer *, real *, integer *, real *, real *, real *);
static logical zerot;
extern /* Subroutine */ int sspt01_(char *, integer *, real *, real *,
integer *, real *, integer *, real *, real *);
static char xtype[1];
extern /* Subroutine */ int sspsv_(char *, integer *, integer *, real *,
integer *, real *, integer *, integer *), slatb4_(char *,
integer *, integer *, integer *, char *, integer *, integer *,
real *, integer *, real *, char *),
aladhd_(integer *, char *);
static integer in, kl;
extern /* Subroutine */ int alaerh_(char *, char *, integer *, integer *,
char *, integer *, integer *, integer *, integer *, integer *,
integer *, integer *, integer *, integer *);
static integer ku, nt;
static real rcondc;
static char packit[1];
extern /* Subroutine */ int alasvm_(char *, integer *, integer *, integer
*, integer *);
static real cndnum, ainvnm;
extern /* Subroutine */ int slacpy_(char *, integer *, integer *, real *,
integer *, real *, integer *), slarhs_(char *, char *,
char *, char *, integer *, integer *, integer *, integer *,
integer *, real *, integer *, real *, integer *, real *, integer *
, integer *, integer *), slaset_(
char *, integer *, integer *, real *, real *, real *, integer *);
extern doublereal slansp_(char *, char *, integer *, real *, real *);
extern /* Subroutine */ int slatms_(integer *, integer *, char *, integer
*, char *, real *, integer *, real *, real *, integer *, integer *
, char *, real *, integer *, real *, integer *);
static real result[6];
extern /* Subroutine */ int ssptrf_(char *, integer *, real *, integer *,
integer *), ssptri_(char *, integer *, real *, integer *,
real *, integer *), serrvx_(char *, integer *),
sspsvx_(char *, char *, integer *, integer *, real *, real *,
integer *, real *, integer *, real *, integer *, real *, real *,
real *, real *, integer *, integer *);
static integer lda, npp;
/* Fortran I/O blocks */
static cilist io___41 = { 0, 0, 0, fmt_9999, 0 };
static cilist io___44 = { 0, 0, 0, fmt_9998, 0 };
/* -- LAPACK test routine (version 3.0) --
Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
Courant Institute, Argonne National Lab, and Rice University
September 30, 1994
Purpose
=======
SDRVSP tests the driver routines SSPSV and -SVX.
Arguments
=========
DOTYPE (input) LOGICAL array, dimension (NTYPES)
The matrix types to be used for testing. Matrices of type j
(for 1 <= j <= NTYPES) are used for testing if DOTYPE(j) =
.TRUE.; if DOTYPE(j) = .FALSE., then type j is not used.
NN (input) INTEGER
The number of values of N contained in the vector NVAL.
NVAL (input) INTEGER array, dimension (NN)
The values of the matrix dimension N.
NRHS (input) INTEGER
The number of right hand side vectors to be generated for
each linear system.
THRESH (input) REAL
The threshold value for the test ratios. A result is
included in the output file if RESULT >= THRESH. To have
every test ratio printed, use THRESH = 0.
TSTERR (input) LOGICAL
Flag that indicates whether error exits are to be tested.
NMAX (input) INTEGER
The maximum value permitted for N, used in dimensioning the
work arrays.
A (workspace) REAL array, dimension
(NMAX*(NMAX+1)/2)
AFAC (workspace) REAL array, dimension
(NMAX*(NMAX+1)/2)
AINV (workspace) REAL array, dimension
(NMAX*(NMAX+1)/2)
B (workspace) REAL array, dimension (NMAX*NRHS)
X (workspace) REAL array, dimension (NMAX*NRHS)
XACT (workspace) REAL array, dimension (NMAX*NRHS)
WORK (workspace) REAL array, dimension
(NMAX*max(2,NRHS))
RWORK (workspace) REAL array, dimension (NMAX+2*NRHS)
IWORK (workspace) INTEGER array, dimension (2*NMAX)
NOUT (input) INTEGER
The unit number for output.
=====================================================================
Parameter adjustments */
--iwork;
--rwork;
--work;
--xact;
--x;
--b;
--ainv;
--afac;
--a;
--nval;
--dotype;
/* Function Body
Initialize constants and the random number seed. */
s_copy(path, "Single precision", (ftnlen)1, (ftnlen)16);
s_copy(path + 1, "SP", (ftnlen)2, (ftnlen)2);
nrun = 0;
nfail = 0;
nerrs = 0;
for (i__ = 1; i__ <= 4; ++i__) {
iseed[i__ - 1] = iseedy[i__ - 1];
/* L10: */
}
/* Computing MAX */
i__1 = *nmax << 1, i__2 = *nmax * *nrhs;
lwork = max(i__1,i__2);
/* Test the error exits */
if (*tsterr) {
serrvx_(path, nout);
}
infoc_1.infot = 0;
/* Do for each value of N in NVAL */
i__1 = *nn;
for (in = 1; in <= i__1; ++in) {
n = nval[in];
lda = max(n,1);
npp = n * (n + 1) / 2;
*(unsigned char *)xtype = 'N';
nimat = 10;
if (n <= 0) {
nimat = 1;
}
i__2 = nimat;
for (imat = 1; imat <= i__2; ++imat) {
/* Do the tests only if DOTYPE( IMAT ) is true. */
if (! dotype[imat]) {
goto L170;
}
/* Skip types 3, 4, 5, or 6 if the matrix size is too small. */
zerot = imat >= 3 && imat <= 6;
if (zerot && n < imat - 2) {
goto L170;
}
/* Do first for UPLO = 'U', then for UPLO = 'L' */
for (iuplo = 1; iuplo <= 2; ++iuplo) {
if (iuplo == 1) {
*(unsigned char *)uplo = 'U';
*(unsigned char *)packit = 'C';
} else {
*(unsigned char *)uplo = 'L';
*(unsigned char *)packit = 'R';
}
/* Set up parameters with SLATB4 and generate a test matrix
with SLATMS. */
slatb4_(path, &imat, &n, &n, type__, &kl, &ku, &anorm, &mode,
&cndnum, dist);
s_copy(srnamc_1.srnamt, "SLATMS", (ftnlen)6, (ftnlen)6);
slatms_(&n, &n, dist, iseed, type__, &rwork[1], &mode, &
cndnum, &anorm, &kl, &ku, packit, &a[1], &lda, &work[
1], &info);
/* Check error code from SLATMS. */
if (info != 0) {
alaerh_(path, "SLATMS", &info, &c__0, uplo, &n, &n, &c_n1,
&c_n1, &c_n1, &imat, &nfail, &nerrs, nout);
goto L160;
}
/* For types 3-6, zero one or more rows and columns of the
matrix to test that INFO is returned correctly. */
if (zerot) {
if (imat == 3) {
izero = 1;
} else if (imat == 4) {
izero = n;
} else {
izero = n / 2 + 1;
}
if (imat < 6) {
/* Set row and column IZERO to zero. */
if (iuplo == 1) {
ioff = (izero - 1) * izero / 2;
i__3 = izero - 1;
for (i__ = 1; i__ <= i__3; ++i__) {
a[ioff + i__] = 0.f;
/* L20: */
}
ioff += izero;
i__3 = n;
for (i__ = izero; i__ <= i__3; ++i__) {
a[ioff] = 0.f;
ioff += i__;
/* L30: */
}
} else {
ioff = izero;
i__3 = izero - 1;
for (i__ = 1; i__ <= i__3; ++i__) {
a[ioff] = 0.f;
ioff = ioff + n - i__;
/* L40: */
}
ioff -= izero;
i__3 = n;
for (i__ = izero; i__ <= i__3; ++i__) {
a[ioff + i__] = 0.f;
/* L50: */
}
}
} else {
ioff = 0;
if (iuplo == 1) {
/* Set the first IZERO rows and columns to zero. */
i__3 = n;
for (j = 1; j <= i__3; ++j) {
i2 = min(j,izero);
i__4 = i2;
for (i__ = 1; i__ <= i__4; ++i__) {
a[ioff + i__] = 0.f;
/* L60: */
}
ioff += j;
/* L70: */
}
} else {
/* Set the last IZERO rows and columns to zero. */
i__3 = n;
for (j = 1; j <= i__3; ++j) {
i1 = max(j,izero);
i__4 = n;
for (i__ = i1; i__ <= i__4; ++i__) {
a[ioff + i__] = 0.f;
/* L80: */
}
ioff = ioff + n - j;
/* L90: */
}
}
}
} else {
izero = 0;
}
for (ifact = 1; ifact <= 2; ++ifact) {
/* Do first for FACT = 'F', then for other values. */
*(unsigned char *)fact = *(unsigned char *)&facts[ifact -
1];
/* Compute the condition number for comparison with
the value returned by SSPSVX. */
if (zerot) {
if (ifact == 1) {
goto L150;
}
rcondc = 0.f;
} else if (ifact == 1) {
/* Compute the 1-norm of A. */
anorm = slansp_("1", uplo, &n, &a[1], &rwork[1]);
/* Factor the matrix A. */
scopy_(&npp, &a[1], &c__1, &afac[1], &c__1);
ssptrf_(uplo, &n, &afac[1], &iwork[1], &info);
/* Compute inv(A) and take its norm. */
scopy_(&npp, &afac[1], &c__1, &ainv[1], &c__1);
ssptri_(uplo, &n, &ainv[1], &iwork[1], &work[1], &
info);
ainvnm = slansp_("1", uplo, &n, &ainv[1], &rwork[1]);
/* Compute the 1-norm condition number of A. */
if (anorm <= 0.f || ainvnm <= 0.f) {
rcondc = 1.f;
} else {
rcondc = 1.f / anorm / ainvnm;
}
}
/* Form an exact solution and set the right hand side. */
s_copy(srnamc_1.srnamt, "SLARHS", (ftnlen)6, (ftnlen)6);
slarhs_(path, xtype, uplo, " ", &n, &n, &kl, &ku, nrhs, &
a[1], &lda, &xact[1], &lda, &b[1], &lda, iseed, &
info);
*(unsigned char *)xtype = 'C';
/* --- Test SSPSV --- */
if (ifact == 2) {
scopy_(&npp, &a[1], &c__1, &afac[1], &c__1);
slacpy_("Full", &n, nrhs, &b[1], &lda, &x[1], &lda);
/* Factor the matrix and solve the system using SSPSV. */
s_copy(srnamc_1.srnamt, "SSPSV ", (ftnlen)6, (ftnlen)
6);
sspsv_(uplo, &n, nrhs, &afac[1], &iwork[1], &x[1], &
lda, &info);
/* Adjust the expected value of INFO to account for
pivoting. */
k = izero;
if (k > 0) {
L100:
if (iwork[k] < 0) {
if (iwork[k] != -k) {
k = -iwork[k];
goto L100;
}
} else if (iwork[k] != k) {
k = iwork[k];
goto L100;
}
}
/* Check error code from SSPSV . */
if (info != k) {
alaerh_(path, "SSPSV ", &info, &k, uplo, &n, &n, &
c_n1, &c_n1, nrhs, &imat, &nfail, &nerrs,
nout);
goto L120;
} else if (info != 0) {
goto L120;
}
/* Reconstruct matrix from factors and compute
residual. */
sspt01_(uplo, &n, &a[1], &afac[1], &iwork[1], &ainv[1]
, &lda, &rwork[1], result);
/* Compute residual of the computed solution. */
slacpy_("Full", &n, nrhs, &b[1], &lda, &work[1], &lda);
sppt02_(uplo, &n, nrhs, &a[1], &x[1], &lda, &work[1],
&lda, &rwork[1], &result[1]);
/* Check solution from generated exact solution. */
sget04_(&n, nrhs, &x[1], &lda, &xact[1], &lda, &
rcondc, &result[2]);
nt = 3;
/* Print information about the tests that did not pass
the threshold. */
i__3 = nt;
for (k = 1; k <= i__3; ++k) {
if (result[k - 1] >= *thresh) {
if (nfail == 0 && nerrs == 0) {
aladhd_(nout, path);
}
io___41.ciunit = *nout;
s_wsfe(&io___41);
do_fio(&c__1, "SSPSV ", (ftnlen)6);
do_fio(&c__1, uplo, (ftnlen)1);
do_fio(&c__1, (char *)&n, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&imat, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&k, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&result[k - 1], (ftnlen)
sizeof(real));
e_wsfe();
++nfail;
}
/* L110: */
}
nrun += nt;
L120:
;
}
/* --- Test SSPSVX --- */
if (ifact == 2 && npp > 0) {
slaset_("Full", &npp, &c__1, &c_b59, &c_b59, &afac[1],
&npp);
}
slaset_("Full", &n, nrhs, &c_b59, &c_b59, &x[1], &lda);
/* Solve the system and compute the condition number and
error bounds using SSPSVX. */
s_copy(srnamc_1.srnamt, "SSPSVX", (ftnlen)6, (ftnlen)6);
sspsvx_(fact, uplo, &n, nrhs, &a[1], &afac[1], &iwork[1],
&b[1], &lda, &x[1], &lda, &rcond, &rwork[1], &
rwork[*nrhs + 1], &work[1], &iwork[n + 1], &info);
/* Adjust the expected value of INFO to account for
pivoting. */
k = izero;
if (k > 0) {
L130:
if (iwork[k] < 0) {
if (iwork[k] != -k) {
k = -iwork[k];
goto L130;
}
} else if (iwork[k] != k) {
k = iwork[k];
goto L130;
}
}
/* Check the error code from SSPSVX. */
if (info != k) {
/* Writing concatenation */
i__5[0] = 1, a__1[0] = fact;
i__5[1] = 1, a__1[1] = uplo;
s_cat(ch__1, a__1, i__5, &c__2, (ftnlen)2);
alaerh_(path, "SSPSVX", &info, &k, ch__1, &n, &n, &
c_n1, &c_n1, nrhs, &imat, &nfail, &nerrs,
nout);
goto L150;
}
if (info == 0) {
if (ifact >= 2) {
/* Reconstruct matrix from factors and compute
residual. */
sspt01_(uplo, &n, &a[1], &afac[1], &iwork[1], &
ainv[1], &lda, &rwork[(*nrhs << 1) + 1],
result);
k1 = 1;
} else {
k1 = 2;
}
/* Compute residual of the computed solution. */
slacpy_("Full", &n, nrhs, &b[1], &lda, &work[1], &lda);
sppt02_(uplo, &n, nrhs, &a[1], &x[1], &lda, &work[1],
&lda, &rwork[(*nrhs << 1) + 1], &result[1]);
/* Check solution from generated exact solution. */
sget04_(&n, nrhs, &x[1], &lda, &xact[1], &lda, &
rcondc, &result[2]);
/* Check the error bounds from iterative refinement. */
sppt05_(uplo, &n, nrhs, &a[1], &b[1], &lda, &x[1], &
lda, &xact[1], &lda, &rwork[1], &rwork[*nrhs
+ 1], &result[3]);
} else {
k1 = 6;
}
/* Compare RCOND from SSPSVX with the computed value
in RCONDC. */
result[5] = sget06_(&rcond, &rcondc);
/* Print information about the tests that did not pass
the threshold. */
for (k = k1; k <= 6; ++k) {
if (result[k - 1] >= *thresh) {
if (nfail == 0 && nerrs == 0) {
aladhd_(nout, path);
}
io___44.ciunit = *nout;
s_wsfe(&io___44);
do_fio(&c__1, "SSPSVX", (ftnlen)6);
do_fio(&c__1, fact, (ftnlen)1);
do_fio(&c__1, uplo, (ftnlen)1);
do_fio(&c__1, (char *)&n, (ftnlen)sizeof(integer))
;
do_fio(&c__1, (char *)&imat, (ftnlen)sizeof(
integer));
do_fio(&c__1, (char *)&k, (ftnlen)sizeof(integer))
;
do_fio(&c__1, (char *)&result[k - 1], (ftnlen)
sizeof(real));
e_wsfe();
++nfail;
}
/* L140: */
}
nrun = nrun + 7 - k1;
L150:
;
}
L160:
;
}
L170:
;
}
/* L180: */
}
/* Print a summary of the results. */
alasvm_(path, nout, &nfail, &nrun, &nerrs);
return 0;
/* End of SDRVSP */
} /* sdrvsp_ */
int sspsv_(char *uplo, int *n, int *nrhs, float *ap,
int *ipiv, float *b, int *ldb, int *info)
{
/* System generated locals */
int b_dim1, b_offset, i__1;
/* Local variables */
extern int lsame_(char *, char *);
extern int xerbla_(char *, int *), ssptrf_(
char *, int *, float *, int *, int *), ssptrs_(
char *, int *, int *, float *, int *, float *, int *
, int *);
/* -- LAPACK driver routine (version 3.2) -- */
/* Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd.. */
/* November 2006 */
/* .. Scalar Arguments .. */
/* .. */
/* .. Array Arguments .. */
/* .. */
/* Purpose */
/* ======= */
/* SSPSV computes the solution to a float system of linear equations */
/* A * X = B, */
/* where A is an N-by-N symmetric matrix stored in packed format and X */
/* and B are N-by-NRHS matrices. */
/* The diagonal pivoting method is used to factor A as */
/* A = U * D * U**T, if UPLO = 'U', or */
/* A = L * D * L**T, if UPLO = 'L', */
/* where U (or L) is a product of permutation and unit upper (lower) */
/* triangular matrices, D is symmetric and block diagonal with 1-by-1 */
/* and 2-by-2 diagonal blocks. The factored form of A is then used to */
/* solve the system of equations A * X = B. */
/* Arguments */
/* ========= */
/* UPLO (input) CHARACTER*1 */
/* = 'U': Upper triangle of A is stored; */
/* = 'L': Lower triangle of A is stored. */
/* N (input) INTEGER */
/* The number of linear equations, i.e., the order of the */
/* matrix A. N >= 0. */
/* NRHS (input) INTEGER */
/* The number of right hand sides, i.e., the number of columns */
/* of the matrix B. NRHS >= 0. */
/* AP (input/output) REAL array, dimension (N*(N+1)/2) */
/* On entry, the upper or lower triangle of the symmetric matrix */
/* A, packed columnwise in a linear array. The j-th column of A */
/* is stored in the array AP as follows: */
/* if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j; */
/* if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n. */
/* See below for further details. */
/* On exit, the block diagonal matrix D and the multipliers used */
/* to obtain the factor U or L from the factorization */
/* A = U*D*U**T or A = L*D*L**T as computed by SSPTRF, stored as */
/* a packed triangular matrix in the same storage format as A. */
/* IPIV (output) INTEGER array, dimension (N) */
/* Details of the interchanges and the block structure of D, as */
/* determined by SSPTRF. If IPIV(k) > 0, then rows and columns */
/* k and IPIV(k) were interchanged, and D(k,k) is a 1-by-1 */
/* diagonal block. If UPLO = 'U' and IPIV(k) = IPIV(k-1) < 0, */
/* then rows and columns k-1 and -IPIV(k) were interchanged and */
/* D(k-1:k,k-1:k) is a 2-by-2 diagonal block. If UPLO = 'L' and */
/* IPIV(k) = IPIV(k+1) < 0, then rows and columns k+1 and */
/* -IPIV(k) were interchanged and D(k:k+1,k:k+1) is a 2-by-2 */
/* diagonal block. */
/* B (input/output) REAL array, dimension (LDB,NRHS) */
/* On entry, the N-by-NRHS right hand side matrix B. */
/* On exit, if INFO = 0, the N-by-NRHS solution matrix X. */
/* LDB (input) INTEGER */
/* The leading dimension of the array B. LDB >= MAX(1,N). */
/* INFO (output) INTEGER */
/* = 0: successful exit */
/* < 0: if INFO = -i, the i-th argument had an illegal value */
/* > 0: if INFO = i, D(i,i) is exactly zero. The factorization */
/* has been completed, but the block diagonal matrix D is */
/* exactly singular, so the solution could not be */
/* computed. */
/* Further Details */
/* =============== */
/* The packed storage scheme is illustrated by the following example */
/* when N = 4, UPLO = 'U': */
/* Two-dimensional storage of the symmetric matrix A: */
/* a11 a12 a13 a14 */
/* a22 a23 a24 */
/* a33 a34 (aij = aji) */
/* a44 */
/* Packed storage of the upper triangle of A: */
/* AP = [ a11, a12, a22, a13, a23, a33, a14, a24, a34, a44 ] */
/* ===================================================================== */
/* .. External Functions .. */
/* .. */
/* .. External Subroutines .. */
/* .. */
/* .. Intrinsic Functions .. */
/* .. */
/* .. Executable Statements .. */
/* Test the input parameters. */
/* Parameter adjustments */
--ap;
--ipiv;
b_dim1 = *ldb;
b_offset = 1 + b_dim1;
b -= b_offset;
/* Function Body */
*info = 0;
if (! lsame_(uplo, "U") && ! lsame_(uplo, "L")) {
*info = -1;
} else if (*n < 0) {
*info = -2;
} else if (*nrhs < 0) {
*info = -3;
} else if (*ldb < MAX(1,*n)) {
*info = -7;
}
if (*info != 0) {
i__1 = -(*info);
xerbla_("SSPSV ", &i__1);
return 0;
}
/* Compute the factorization A = U*D*U' or A = L*D*L'. */
ssptrf_(uplo, n, &ap[1], &ipiv[1], info);
if (*info == 0) {
/* Solve the system A*X = B, overwriting B with X. */
ssptrs_(uplo, n, nrhs, &ap[1], &ipiv[1], &b[b_offset], ldb, info);
}
return 0;
/* End of SSPSV */
} /* sspsv_ */
