/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
mount_devfs();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (initrd_load())
goto out;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
umount_devfs("/dev");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
security_sb_post_mountroot();
mount_devfs_fs ();
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
printk(KERN_DEBUG "root_device_name: %s\n",root_device_name);
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
printk(KERN_DEBUG "after devtmpfs_mount\n");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
printk(KERN_DEBUG "after sys_mount\n");
sys_chroot((const char __user __force *)".");
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/* wait for the known devices to complete their probing */
while (driver_probe_done() != 0)
msleep(100);
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3) ||
!strncmp(root_device_name, "mmc", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
security_sb_post_mountroot();
}
/*! 2017. 6. 3 study -ing */
static int devtmpfsd(void *p)
{
char options[] = "mode=0755";
int *err = p;
/*! sys_unshare는 fork.c의 "SYSCALL_DEFINE1(unshare" 를 참조 */
*err = sys_unshare(CLONE_NEWNS);
if (*err)
goto out;
/*! sys_mount는 fs/namespace.c의 "SYSCALL_DEFINE5(mount" 를 참조 */
*err = sys_mount("devtmpfs", "/", "devtmpfs", MS_SILENT, options);
if (*err)
goto out;
/*! sys_chdir는 fs/open.c 의 "SYSCALL_DEFINE1(chdir" 을 참조 */
sys_chdir("/.."); /* will traverse into overmounted root */
/*! sys_chdir는 fs/open.c 의 "SYSCALL_DEFINE1(chroot" 을 참조 */
sys_chroot(".");
complete(&setup_done);
while (1) {
spin_lock(&req_lock);
while (requests) {
struct req *req = requests;
requests = NULL;
spin_unlock(&req_lock);
while (req) {
struct req *next = req->next;
req->err = handle(req->name, req->mode,
req->uid, req->gid, req->dev);
complete(&req->done);
req = next;
}
spin_lock(&req_lock);
}
__set_current_state(TASK_INTERRUPTIBLE);
spin_unlock(&req_lock);
schedule();
}
return 0;
out:
complete(&setup_done);
return *err;
}
static int devtmpfsd(void *p)
{
char options[] = "mode=0755";
int *err = p;
*err = sys_unshare(CLONE_NEWNS);
printk(KERN_INFO "%s, %s\n", __FILE__,__func__);
if (*err)
goto out;
*err = sys_mount("devtmpfs", "/", "devtmpfs", MS_SILENT, options);
if (*err)
goto out;
sys_chdir("/.."); /* will traverse into overmounted root */
sys_chroot(".");
complete(&setup_done);
while (1) {
spin_lock(&req_lock);
while (requests) {
struct req *req = requests;
requests = NULL;
spin_unlock(&req_lock);
while (req) {
struct req *next = req->next;
req->err = handle(req->name, req->mode, req->dev);
complete(&req->done);
req = next;
}
spin_lock(&req_lock);
}
__set_current_state(TASK_INTERRUPTIBLE);
spin_unlock(&req_lock);
schedule();
}
return 0;
out:
complete(&setup_done);
return *err;
}
static void __init handle_initrd(void)
{
int error;
int pid;
real_root_dev = new_encode_dev(ROOT_DEV);
create_dev("/dev/root.old", Root_RAM0);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir((const char __user *)"/old", 0700);
root_fd = sys_open((const char __user *)"/", 0, 0);
old_fd = sys_open((const char __user *)"/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir((const char __user *)"/root");
sys_mount((char __user *)".", (char __user *)"/", NULL, MS_MOVE, NULL);
sys_chroot((const char __user *)".");
/*
* In case that a resume from disk is carried out by linuxrc or one of
* its children, we need to tell the freezer not to wait for us.
*/
current->flags |= PF_FREEZER_SKIP;
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0)
while (pid != sys_wait4(-1, NULL, 0, NULL))
yield();
current->flags &= ~PF_FREEZER_SKIP;
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount((char __user *)"/", (char __user *)".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot((const char __user *)".");
sys_close(old_fd);
sys_close(root_fd);
if (new_decode_dev(real_root_dev) == Root_RAM0) {
sys_chdir((const char __user *)"/old");
return;
}
ROOT_DEV = new_decode_dev(real_root_dev);
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount((char __user *)"/old", (char __user *)"/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = sys_open((const char __user *)"/dev/root.old", O_RDWR, 0);
if (error == -ENOENT)
printk("/initrd does not exist. Ignored.\n");
else
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount((char __user *)"/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
sys_close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
}
static int __init mount_nfs_root(void)
{
char *root_dev, *root_data;
unsigned int timeout;
int try, err;
err = nfs_root_data(&root_dev, &root_data);
if (err != 0)
return 0;
/*
* The server or network may not be ready, so try several
* times. Stop after a few tries in case the client wants
* to fall back to other boot methods.
*/
timeout = NFSROOT_TIMEOUT_MIN;
for (try = 1; ; try++) {
err = do_mount_root(root_dev, "nfs",
root_mountflags, root_data);
if (err == 0)
return 1;
if (try > NFSROOT_RETRY_MAX)
break;
/* Wait, in case the server refused us immediately */
ssleep(timeout);
timeout <<= 1;
if (timeout > NFSROOT_TIMEOUT_MAX)
timeout = NFSROOT_TIMEOUT_MAX;
}
return 0;
}
#endif
#if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
void __init change_floppy(char *fmt, ...)
{
struct termios termios;
char buf[80];
char c;
int fd;
va_list args;
va_start(args, fmt);
vsprintf(buf, fmt, args);
va_end(args);
fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
if (fd >= 0) {
sys_ioctl(fd, FDEJECT, 0);
sys_close(fd);
}
printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
fd = sys_open("/dev/console", O_RDWR, 0);
if (fd >= 0) {
sys_ioctl(fd, TCGETS, (long)&termios);
termios.c_lflag &= ~ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_read(fd, &c, 1);
termios.c_lflag |= ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_close(fd);
}
}
#endif
void __init mount_root(void)
{
#ifdef CONFIG_ROOT_NFS
if (ROOT_DEV == Root_NFS) {
if (mount_nfs_root())
return;
printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
ROOT_DEV = Root_FD0;
}
#endif
#ifdef CONFIG_BLK_DEV_FD
if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if (rd_doload==2) {
if (rd_load_disk(1)) {
ROOT_DEV = Root_RAM1;
root_device_name = NULL;
}
} else
change_floppy("root floppy");
}
#endif
#ifdef CONFIG_BLOCK
create_dev("/dev/root", ROOT_DEV);
mount_block_root("/dev/root", root_mountflags);
#endif
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
#ifdef CONFIG_RTL_FLASH_DUAL_IMAGE_ENABLE
extern int is_bank2_root(); //extern from rtl_gpio.c
if(is_bank2_root()) //assume bank1 root is mtdblock1 , bank2's root is mtdblock3
strcpy(root_device_name,"/dev/mtdblock3");
#endif
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
static void __init handle_initrd(void)
{
int error;
int pid;
real_root_dev = new_encode_dev(ROOT_DEV);
create_dev("/dev/root.old", Root_RAM0);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir("/old", 0700);
root_fd = sys_open("/", 0, 0);
old_fd = sys_open("/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir("/root");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0) {
while (pid != sys_wait4(-1, NULL, 0, NULL)) {
try_to_freeze();
yield();
}
}
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount("/", ".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot(".");
sys_close(old_fd);
sys_close(root_fd);
if (new_decode_dev(real_root_dev) == Root_RAM0) {
sys_chdir("/old");
return;
}
ROOT_DEV = new_decode_dev(real_root_dev);
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = sys_open("/dev/root.old", O_RDWR, 0);
if (error == -ENOENT)
printk("/initrd does not exist. Ignored.\n");
else
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount("/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
sys_close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
}
int main2(int argc,const char *argv[])
{
/* shall I run as a daemon */
static BOOL is_daemon = False;
static BOOL interactive = False;
static BOOL Fork = True;
static BOOL no_process_group = False;
static BOOL log_stdout = False;
static char *ports = NULL;
int opt;
#ifndef _XBOX
poptContext pc;
struct poptOption long_options[] = {
POPT_AUTOHELP
{"daemon", 'D', POPT_ARG_VAL, &is_daemon, True, "Become a daemon (default)" },
{"interactive", 'i', POPT_ARG_VAL, &interactive, True, "Run interactive (not a daemon)"},
{"foreground", 'F', POPT_ARG_VAL, &Fork, False, "Run daemon in foreground (for daemontools, etc.)" },
{"no-process-group", '\0', POPT_ARG_VAL, &no_process_group, True, "Don't create a new process group" },
{"log-stdout", 'S', POPT_ARG_VAL, &log_stdout, True, "Log to stdout" },
{"build-options", 'b', POPT_ARG_NONE, NULL, 'b', "Print build options" },
{"port", 'p', POPT_ARG_STRING, &ports, 0, "Listen on the specified ports"},
POPT_COMMON_SAMBA
POPT_COMMON_DYNCONFIG
POPT_TABLEEND
};
#else
interactive = True;
log_stdout = True;
#endif
load_case_tables();
#ifdef HAVE_SET_AUTH_PARAMETERS
set_auth_parameters(argc,argv);
#endif
#ifndef _XBOX
pc = poptGetContext("smbd", argc, argv, long_options, 0);
while((opt = poptGetNextOpt(pc)) != -1) {
switch (opt) {
case 'b':
build_options(True); /* Display output to screen as well as debug */
exit(0);
break;
}
}
poptFreeContext(pc);
#endif
#ifdef HAVE_SETLUID
/* needed for SecureWare on SCO */
setluid(0);
#endif
sec_init();
set_remote_machine_name("smbd", False);
if (interactive) {
Fork = False;
log_stdout = True;
}
if (interactive && (DEBUGLEVEL >= 9)) {
talloc_enable_leak_report();
}
if (log_stdout && Fork) {
DEBUG(0,("ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i)\n"));
exit(1);
}
setup_logging(argv[0],log_stdout);
/* we want to re-seed early to prevent time delays causing
client problems at a later date. (tridge) */
generate_random_buffer(NULL, 0);
/* make absolutely sure we run as root - to handle cases where people
are crazy enough to have it setuid */
gain_root_privilege();
gain_root_group_privilege();
#ifndef _XBOX
fault_setup((void (*)(void *))exit_server_fault);
dump_core_setup("smbd");
#endif
CatchSignal(SIGTERM , SIGNAL_CAST sig_term);
#ifndef _XBOX
CatchSignal(SIGHUP,SIGNAL_CAST sig_hup);
/* we are never interested in SIGPIPE */
BlockSignals(True,SIGPIPE);
#endif
#if defined(SIGFPE)
/* we are never interested in SIGFPE */
BlockSignals(True,SIGFPE);
#endif
#if defined(SIGUSR2)
/* We are no longer interested in USR2 */
BlockSignals(True,SIGUSR2);
#endif
/* POSIX demands that signals are inherited. If the invoking process has
* these signals masked, we will have problems, as we won't recieve them. */
#ifndef _XBOX
BlockSignals(False, SIGHUP);
#endif
BlockSignals(False, SIGUSR1);
BlockSignals(False, SIGTERM);
/* we want total control over the permissions on created files,
so set our umask to 0 */
umask(0);
init_sec_ctx();
reopen_logs();
DEBUG(0,( "smbd version %s started.\n", SAMBA_VERSION_STRING));
DEBUGADD( 0, ( "%s\n", COPYRIGHT_STARTUP_MESSAGE ) );
DEBUG(2,("uid=%d gid=%d euid=%d egid=%d\n",
(int)getuid(),(int)getgid(),(int)geteuid(),(int)getegid()));
/* Output the build options to the debug log */
build_options(False);
if (sizeof(uint16) < 2 || sizeof(uint32) < 4) {
DEBUG(0,("ERROR: Samba is not configured correctly for the word size on your machine\n"));
exit(1);
}
/*
* Do this before reload_services.
*/
if (!reload_services(False))
return(-1);
init_structs();
#ifdef WITH_PROFILE
if (!profile_setup(False)) {
DEBUG(0,("ERROR: failed to setup profiling\n"));
return -1;
}
#endif
DEBUG(3,( "loaded services\n"));
if (!is_daemon && !is_a_socket(0)) {
if (!interactive)
DEBUG(0,("standard input is not a socket, assuming -D option\n"));
/*
* Setting is_daemon here prevents us from eventually calling
* the open_sockets_inetd()
*/
is_daemon = True;
}
if (is_daemon && !interactive) {
DEBUG( 3, ( "Becoming a daemon.\n" ) );
become_daemon(Fork, no_process_group);
}
#if HAVE_SETPGID
/*
* If we're interactive we want to set our own process group for
* signal management.
*/
if (interactive && !no_process_group)
setpgid( (pid_t)0, (pid_t)0);
#endif
if (!directory_exist(lp_lockdir(), NULL))
mkdir(lp_lockdir(), 0755);
#ifndef _XBOX
if (is_daemon)
pidfile_create("smbd");
#endif
/* Setup all the TDB's - including CLEAR_IF_FIRST tdb's. */
if (!message_init())
exit(1);
/* Initialize our global sam sid first -- quite a lot of the other
* initialization routines further down depend on it.
*/
/* Initialise the password backed before the global_sam_sid
to ensure that we fetch from ldap before we make a domain sid up */
if(!initialize_password_db(False))
exit(1);
/* Fail gracefully if we can't open secrets.tdb */
if (!secrets_init()) {
DEBUG(0, ("ERROR: smbd can not open secrets.tdb\n"));
exit(1);
}
if(!get_global_sam_sid()) {
DEBUG(0,("ERROR: Samba cannot create a SAM SID.\n"));
exit(1);
}
if (!session_init())
exit(1);
if (conn_tdb_ctx() == NULL)
exit(1);
if (!locking_init(0))
exit(1);
namecache_enable();
if (!init_registry())
exit(1);
#if 0
if (!init_svcctl_db())
exit(1);
#endif
#ifndef _XBOX
if (!print_backend_init())
exit(1);
#endif
if (!init_guest_info()) {
DEBUG(0,("ERROR: failed to setup guest info.\n"));
return -1;
}
/* Setup the main smbd so that we can get messages. */
/* don't worry about general printing messages here */
claim_connection(NULL,"",0,True,FLAG_MSG_GENERAL|FLAG_MSG_SMBD);
/* only start the background queue daemon if we are
running as a daemon -- bad things will happen if
smbd is launched via inetd and we fork a copy of
ourselves here */
#ifndef _XBOX
if ( is_daemon && !interactive )
start_background_queue();
#endif
/* Always attempt to initialize DMAPI. We will only use it later if
* lp_dmapi_support is set on the share, but we need a single global
* session to work with.
*/
dmapi_init_session();
if (!open_sockets_smbd(is_daemon, interactive, ports))
exit(1);
/*
* everything after this point is run after the fork()
*/
static_init_rpc;
init_modules();
/* possibly reload the services file. */
reload_services(True);
if (!init_account_policy()) {
DEBUG(0,("Could not open account policy tdb.\n"));
exit(1);
}
if (*lp_rootdir()) {
if (sys_chroot(lp_rootdir()) == 0)
DEBUG(2,("Changed root to %s\n", lp_rootdir()));
}
/* Setup oplocks */
if (!init_oplocks())
exit(1);
/* Setup change notify */
if (!init_change_notify())
exit(1);
/* Setup aio signal handler. */
initialize_async_io_handler();
/* re-initialise the timezone */
TimeInit();
/* register our message handlers */
message_register(MSG_SMB_FORCE_TDIS, msg_force_tdis);
smbd_process();
#ifdef _XBOX
xb_DecClientCount();
#endif
namecache_shutdown();
exit_server_cleanly(NULL);
return(0);
}
