void machine_tape_init_c64(void)
{
if (tapemode != 1) {
if (tapemode == 0) {
tape_init(&tapeinit_c64_mode);
} else {
tape_reinit(&tapeinit_c64_mode);
}
tapemode = 1;
}
}
void machine_tape_init_c128(void)
{
if (tapemode != 2) {
if (tapemode == 0) {
tape_init(&tapeinit_c128_mode);
} else {
tape_reinit(&tapeinit_c128_mode);
}
tapemode = 2;
}
}
static void
test_tape_load_p_second_dict_on_tape()
{
int i;
unsigned char mem[65536];
char *filename = "fixtures/test.tap";
char *filename_on_tape = "test2 ";
observer_status_init();
tape_init(observer);
tape_attach(filename);
mem[9985] = 0;
strncpy(mem+9986, filename_on_tape, 10);
/* Skip first dictionary */
tape_load_p(mem, 10);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 62);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Skipping file: test") == 0);
/* Load the header block */
tape_load_p(mem, 10);
/* Check correct name is in memory */
assert(memcmp(mem+10+1, mem+9986, 10) == 0);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 90);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Found file: test2") == 0);
/* Load the data block */
tape_load_p(mem, 10000);
/* Check data block is loaded */
assert(mem[10000] == 0x54);
assert(mem[10001] == 0x45);
assert(mem[10029] == 0x32);
assert(mem[10030] == 0xB6);
assert(mem[10031] == 0x04);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 125);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Load complete.") == 0);
tape_detach();
}
static void
test_tape_attach_file_doesnt_exist()
{
char *filename = tmpnam(NULL);
FILE *fp;
tape_init(observer);
fp = tape_attach(filename);
assert(fp != NULL);
assert(ftell(fp) == 0);
assert(fputc(65, fp) == 65);
tape_detach();
}
/* Tests that tape_save_p() truncates the tape properly */
static void
test_tape_save_p_truncate()
{
char *filename = tmpnam(NULL);
FILE *fp;
unsigned char mem[65536];
int i;
observer_status_init();
tape_init(observer);
/* Save 3 lots of header and data blocks */
tape_attach(filename);
for (i = 0; i < 3; i++) {
generate_block(mem+(100*i), 25+i, 'A'+i);
generate_block(mem+(100*i)+50, 30+i, 6+i);
tape_save_p(mem+(100*i), 25+i);
tape_save_p(mem+(100*i)+50, 30+i);
}
tape_detach();
tape_attach(filename);
/* Load first header and data blocks */
for(i = 0; i < 10; i++) {
mem[9986+i] = mem[100+i];
}
tape_load_p(mem, 1000);
tape_load_p(mem, 1150);
/* Save 1 set of header and data blocks after the first 2 blocks */
generate_block(mem+2000, 28, 'N');
generate_block(mem+2050, 40, 20);
tape_save_p(mem+2000, 28);
tape_save_p(mem+2050, 20);
tape_detach();
/* Check that tape only contains first header and data blocks followed by
* the last saved header and data blocks */
fp = fopen(filename, "rb");
assert(fp != NULL);
assert(block_correct(fp, mem, 25));
assert(block_correct(fp, mem+50, 30));
assert(block_correct(fp, mem+2000, 28));
assert(block_correct(fp, mem+2050, 20));
assert(fgetc(fp) == EOF);
fclose(fp);
}
int main(int argc, char *argv[])
{
signed int entrypoint;
if (argc < 2) {
printf("Usage: %s <script name>\n", argv[0]);
exit(-1);
}
tape_init();
entrypoint = load_script(argv[1]);
interpret(entrypoint);
return 0;
}
static void
test_tape_init()
{
char *filename = "fixtures/test.tap";
observer_status_init();
tape_init(observer);
tape_attach(filename);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 0);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Tape image attached.") == 0);
tape_detach();
}
static void
test_tape_save_p()
{
char *filename = tmpnam(NULL);
FILE *fp;
unsigned char mem[65536];
/* Create header and data block */
generate_block(mem, 25, 'A');
generate_block(mem+50, 300, 6);
observer_status_init();
tape_init(observer);
tape_attach(filename);
/* Save the blocks */
tape_save_p(mem, 25);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 28);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Saving to file: BCDEFGHIJK") == 0);
tape_save_p(mem+50, 300);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 331);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Save complete.") == 0);
tape_detach();
/* Check the header and data blocks */
fp = fopen(filename, "rb");
assert(fp != NULL);
assert(block_correct(fp, mem, 25));
assert(block_correct(fp, mem+50, 300));
assert(fgetc(fp) == EOF);
fclose(fp);
}
static void
test_tape_attach_file_can_not_create()
{
char *filename = "";
FILE *fp;
observer_status_init();
tape_init(observer);
fp = tape_attach(filename);
assert(fp == NULL);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 0);
assert(observer_status.tape_pos == 0);
assert(observer_status.message_type == TAPE_ERROR);
assert(strcmp(observer_status.message, "Couldn't create file.") == 0);
tape_detach();
}
int cbm2rom_load_kernal(const char *rom_name)
{
if (!rom_loaded)
return 0; /* init not far enough */
/* De-initialize kbd-buf, autostart and tape stuff here before
reloading the ROM the traps are installed in. */
kbdbuf_init(0, 0, 0, 0);
autostart_init(0, 0, 0, 0, 0, 0);
tape_init(&tapeinit);
/* Load Kernal ROM. */
if (!util_check_null_string(rom_name)) {
if (sysfile_load(rom_name, mem_rom + 0xe000, 0x2000, 0x2000) < 0) {
log_error(cbm2rom_log, "Couldn't load ROM `%s'.", rom_name);
return -1;
}
}
return cbm2rom_checksum();
}
static void
test_tape_attach_file_exists()
{
FILE *fp;
char *filename = "fixtures/test.tap";
observer_status_init();
tape_init(observer);
fp = tape_attach(filename);
assert(fp != NULL);
assert(ftell(fp) == 0);
assert(fgetc(fp) == 0x1A);
assert(observer_status.observer_called == 1);
assert(observer_status.tape_attached == 1);
assert(observer_status.tape_pos == 0);
assert(observer_status.message_type == TAPE_MESSAGE);
assert(strcmp(observer_status.message, "Tape image attached.") == 0);
tape_detach();
}
/* VIC20-specific initialization. */
int machine_specific_init(void)
{
vic20_log = log_open("VIC20");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. If user does not want them, or if the
``drive'' emulation is used, do not install them. */
if (serial_init(vic20_serial_traps) < 0)
return -1;
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
vic20_rsuser_init();
/* initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
autostart_init((CLOCK)
(3 * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
/* Initialize the VIC-I emulation. */
if (vic_init() == NULL)
return -1;
via1_init(machine_context.via1);
via2_init(machine_context.via2);
ieeevia1_init(machine_context.ieeevia1);
ieeevia2_init(machine_context.ieeevia2);
#ifndef COMMON_KBD
/* Load the default keymap file. */
if (vic20_kbd_init() < 0)
return -1;
#endif
vic20_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh
* machine_timing.rfsh_per_sec));
/* Initialize the VIC20-specific part of the UI. */
vic20ui_init();
vic20iec_init();
machine_drive_stub();
return 0;
}
/* Plus4-specific initialization. */
int machine_specific_init(void)
{
int delay;
plus4_log = log_open("Plus4");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
gfxoutput_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#endif
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 2; /* default */
}
autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC * PLUS4_PAL_CYCLES_PER_RFSH), 1, 0, 0xc8, 0xca, -40);
/* Initialize the sidcart first */
sidcart_sound_chip_init();
/* Initialize native sound chip */
ted_sound_chip_init();
/* Initialize cartridge based sound chips */
digiblaster_sound_chip_init();
speech_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
#ifdef USE_BEOS_UI
/* Pre-init Plus4-specific parts of the menus before ted_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
plus4ui_init_early();
#endif
if (ted_init() == NULL) {
return -1;
}
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0) {
return -1;
}
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
if (!console_mode) {
plus4ui_init();
}
if (!video_disabled_mode) {
joystick_init();
}
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
/* Initialize the machine specific I/O */
plus4io_init();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("TEDFullscreen", 1);
}
}
#endif
return 0;
}
int main (int argc, char **argv)
{
char command [CMD_SIZE];
int initialize_tape = 1;
int tape_status = 5;
int status;
unsigned char *beam_ptr;
int first_time = TRUE;
LL_beam_rec *enet_pak;
extern process_exit();
extern print_target_elev ();
/* trap signals */
(void) signal (SIGINT, ((void (*) ()) process_exit));
(void) signal (SIGHUP, ((void (*) ()) process_exit));
(void) signal (SIGTERM, ((void (*) ()) process_exit));
enet_pak = (LL_beam_rec *) malloc ((unsigned) sizeof (LL_beam_rec));
if (enet_pak == NULL)
{
(void) printf ("Malloc error \n");
return (-1);
}
if ((!get_params (&Glob)))
exit (2);
/* initialize streams (fmq and/or shmem) for sending beam data */
if (init_streams ())
{
(void) fprintf (stderr, "streams initialization error");
return (1);
}
if (system ("clear") != 0)
perror ("clear");
/* Determine the source of the data to be reformatted */
if (!Glob.real_time)
{
/* initialize the shared memory for receiving commands*/
if (recv_cmd (1, Glob.cmd_shmem_key, (unsigned char **) &command) == -1)
{
(void) printf ("recv_cmd fatal error\n");
exit (-1);
}
for (;;)
{
if ((status = get_shm_cmd (command)) > 0)
break;
else
if (first_time)
{
first_time = FALSE;
(void) printf ("waiting for menu process to send start command\n");
}
sleep (2);
}
source = parse_settings (command, &Glob);
if (source < 0)
return (0);
}
else
source = RADAR;
switch (source)
{
case RADAR:
if (recv_shm (1, Glob.input_shmem_key, &beam_ptr))
{
(void) printf ("recv_shm fatal error\n");
exit (-1);
}
for (;go ;)
{
if (get_shmem_data (enet_pak, Glob.input_shmem_key)
== 0)
{
if (first_time)
{
(void) printf ("waiting for data\n");
first_time = FALSE;
}
usleep (no_packet);
}
/* Check for a stop command */
if (!Glob.real_time)
{
if ((status = get_shm_cmd (command)) > 0)
{
source = parse_settings (command, &Glob);
if (source < 0) go = 0;
if (source == FLAG_CHANGE)
{
(void) printf ("\n Flag status: Dealias failure = %s\n",
Glob.caf ? "TRUE":"FALSE");
(void) printf (" Point Target = %s\n",
Glob.ctf ? "TRUE":"FALSE");
(void) printf (" SNR thresholding = %s\n",
Glob.cvf ? "TRUE":"FALSE");
(void) printf (" Clutter = %s\n",
Glob.ccv ? "TRUE":"FALSE");
(void) printf (" low PRF in valid gate = %s\n\n",
Glob.cv ? "TRUE":"FALSE");
}
}
}
}
break;
case TAPE:
if (Glob.remote_tape)
{
if (tape_init (&fd_tape, Glob.tape_device))
{
(void) printf("Error initializing the tape device %s",
Glob.tape_device);
source = -1;
return (0);
}
}
for (;go ;)
{
if (initialize_tape)
{
initialize_tape = FALSE;
tape_command ();
}
tape_status = get_tape_data (fd_tape, data_rate, enet_pak);
switch (tape_status)
{
case 0:
/* automatically rewind the tape
* when end of tape is detected
*/
/*
tape_rewind = REWIND;
initialize_tape = TRUE;
*/
/* or stop the system at the end of the tape */
(void) printf ("Received STOP command \n");
go = 0;
exit (0);
break;
case INITIALIZE_RMT:
(void) close (fd_tape);
if (tape_init (&fd_tape, Glob.tape_device))
{
(void) printf("Error initializing the tape device %s",
Glob.tape_device);
source = -1;
return (0);
}
break;
case INITIALIZE:
initialize_tape = TRUE;
break;
case REWIND:
/*go = 0;
exit (0);
break;*/
tape_rewind = REWIND;
initialize_tape = TRUE;
break;
case TAPE_ERR:
(void) printf ("Tape read error / received STOP command \n");
go = 0;
break;
case RATE_CHANGE:
initialize_tape = FALSE;
break;
case PAUSE:
for (;;)
{
if (Glob.remote_tape)
{
(void) rmt_close ();
}
if ((status = get_shm_cmd (command)) > 0)
{
if (Glob.remote_tape)
{
if (tape_init (&fd_tape, Glob.tape_device))
{
(void) printf("Error initializing the tape device %s", Glob.tape_device);
go = 0;
}
}
break;
}
else
usleep (3000);
}
break;
case FLAG_CHANGE:
(void) printf ("\n Flag status: Dealias failure = %s\n",
Glob.caf ? "TRUE":"FALSE");
(void) printf (" Point Target = %s\n",
Glob.ctf ? "TRUE":"FALSE");
(void) printf (" SNR thresholding = %s\n",
Glob.cvf ? "TRUE":"FALSE");
(void) printf (" Clutter = %s\n",
Glob.ccv ? "TRUE":"FALSE");
(void) printf (" low PRF in valid gate = %s\n\n",
Glob.cv ? "TRUE":"FALSE");
}
}
break;
default:
(void) printf ("source unrecognized \n");
break;
}
return (0);
}
/* Plus4-specific initialization. */
int machine_specific_init(void)
{
plus4_log = log_open("Plus4");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0)
return -1;
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
autostart_init((CLOCK)(2 * PLUS4_PAL_RFSH_PER_SEC
* PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
if (ted_init() == NULL)
return -1;
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0)
return -1;
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
* machine_timing.cycles_per_rfsh));
plus4ui_init();
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
return 0;
}
/* C64-specific initialization. */
int machine_specific_init(void)
{
int delay;
c64_log = log_open("C64");
if (mem_load() < 0) {
return -1;
}
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c64_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
c64_rsuser_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
/* Initialize autostart. */
autostart_init((CLOCK)(delay * C64_PAL_RFSH_PER_SEC * C64_PAL_CYCLES_PER_RFSH), 1, 0xcc, 0xd1, 0xd3, 0xd5);
if (vicii_init(VICII_STANDARD) == NULL && !video_disabled_mode) {
return -1;
}
c64_mem_init();
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c64_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
c64_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C64-specific I/O */
c64io_init();
/* Initialize the C64-specific part of the UI. */
if (!console_mode) {
if (machine_class == VICE_MACHINE_C64SC) {
c64scui_init();
} else {
c64ui_init();
}
}
/* Initialize glue logic. */
c64_glue_init();
/* Initialize the +60K. */
plus60k_init();
/* Initialize the +256K. */
plus256k_init();
/* Initialize the C64 256K. */
c64_256k_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
/* Initialize lightpen support and register VICII callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 0);
lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
c64iec_init();
c64fastiec_init();
cartridge_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICIIFullscreen", 1);
}
}
#endif
return 0;
}
/* C128-specific initialization. */
int machine_specific_init(void)
{
c128_log = log_open("C128");
if (mem_load() < 0) {
return -1;
}
if (z80mem_load() < 0) {
return -1;
}
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c128_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* initialize RS232 handler */
rs232drv_init();
c64_rsuser_init();
/* initialize print devices */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. FIXME: at least 0xa26 is only for 40 cols */
autostart_init((CLOCK)(3 * C128_PAL_RFSH_PER_SEC * C128_PAL_CYCLES_PER_RFSH), 1, 0xa27, 0xe0, 0xec, 0xee);
if (vdc_init() == NULL) {
return -1;
}
if (vicii_init(VICII_EXTENDED) == NULL) {
return -1;
}
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c128_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
c128_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(842, 208, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C128-specific part of the UI. */
c128ui_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
/* Initialize lightpen support and register VICII/VDC callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 1);
lightpen_register_timing_callback(vdc_lightpen_timing, 0);
lightpen_register_trigger_callback(c128_trigger_light_pen);
#endif
c64iec_init();
c128fastiec_init();
cartridge_init();
mmu_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline
use VICII as default */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_get_int("40/80ColumnKey", &fs);
if (fs == 1) {
resources_set_int("VICIIFullscreen", 1);
} else {
resources_set_int("VDCFullscreen", 1);
}
}
}
#endif
return 0;
}
/* Plus4-specific initialization. */
int machine_specific_init(void)
{
int delay;
plus4_log = log_open("Plus4");
if (mem_load() < 0)
return -1;
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(plus4_serial_traps) < 0)
return -1;
serial_trap_init(0xa8);
serial_iec_bus_init();
rs232drv_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 2; /* default */
}
autostart_init((CLOCK)(delay * PLUS4_PAL_RFSH_PER_SEC
* PLUS4_PAL_CYCLES_PER_RFSH), 0, 0, 0xc8, 0xca, -40);
/* Initialize the sidcart first */
sidcart_sound_chip_init();
/* Initialize native sound chip */
ted_sound_chip_init();
/* Initialize cartridge based sound chips */
digiblaster_sound_chip_init();
speech_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
if (ted_init() == NULL) {
return -1;
}
acia_init();
#ifndef COMMON_KBD
if (plus4_kbd_init() < 0) {
return -1;
}
#endif
plus4_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize keyboard buffer. */
kbdbuf_init(1319, 239, 8, (CLOCK)(machine_timing.rfsh_per_sec
* machine_timing.cycles_per_rfsh));
plus4ui_init();
cs256k_init();
h256k_init();
plus4iec_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && \
(defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("TEDFullscreen", 1);
}
}
#endif
return 0;
}
/* VIC20-specific initialization. */
int machine_specific_init(void)
{
int delay;
vic20_log = log_open("VIC20");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
/* Initialize serial traps. If user does not want them, or if the
``drive'' emulation is used, do not install them. */
if (serial_init(vic20_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
vic20_rsuser_init();
/* initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
autostart_init((CLOCK)
(delay * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
#ifdef USE_BEOS_UI
/* Pre-init VIC20-specific parts of the menus before vic_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
vic20ui_init_early();
#endif
/* Initialize the VIC-I emulation. */
if (vic_init() == NULL) {
return -1;
}
via1_init(machine_context.via1);
via2_init(machine_context.via2);
ieeevia1_init(machine_context.ieeevia1);
ieeevia2_init(machine_context.ieeevia2);
#ifndef COMMON_KBD
/* Load the default keymap file. */
if (vic20_kbd_init() < 0) {
return -1;
}
#endif
vic20_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip first */
vic_sound_chip_init();
/* Initialize the sidcart */
sidcart_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh * machine_timing.rfsh_per_sec));
/* Initialize the VIC20-specific part of the UI. */
vic20ui_init();
vic20iec_init();
cartridge_init();
#ifdef HAVE_MOUSE
mouse_init();
#ifdef HAVE_LIGHTPEN
/* Initialize lightpen support and register VIC-I callbacks */
lightpen_init();
lightpen_register_timing_callback(vic_lightpen_timing, 0);
lightpen_register_trigger_callback(vic_trigger_light_pen);
#endif
#endif
/* Register joystick callback (for lightpen triggering via fire button) */
joystick_register_machine(via2_check_lightpen);
#ifdef HAVE_MIDI
midi_init();
#endif
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICFullscreen", 1);
}
}
#endif
return 0;
}
/* C64-specific initialization. */
int machine_specific_init(void)
{
c64_log = log_open("C64");
if (mem_load() < 0)
return -1;
if (vsid_mode) {
psid_init_driver();
}
if (!vsid_mode) {
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c64_serial_traps) < 0)
return -1;
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
c64_rsuser_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. */
autostart_init((CLOCK)(3 * C64_PAL_RFSH_PER_SEC
* C64_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
}
if (vicii_init(VICII_STANDARD) == NULL && !console_mode && !vsid_mode)
return -1;
c64_mem_init();
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
if (!vsid_mode) {
tpi_init(machine_context.tpi1);
acia1_init();
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c64_kbd_init() < 0)
return -1;
#endif
c64keyboard_init();
}
c64_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec
* machine_timing.cycles_per_rfsh));
/* Initialize the C64-specific part of the UI. */
if (!console_mode) {
if (vsid_mode)
vsid_ui_init();
else
c64ui_init();
}
if (!vsid_mode)
{
/* Initialize the REU. */
reu_init();
/* Initialize the GEORAM. */
georam_init();
/* Initialize the RAMCART. */
ramcart_init();
/* Initialize the +60K. */
plus60k_init();
/* Initialize the +256K. */
plus256k_init();
/* Initialize the C64 256K. */
c64_256k_init();
/* Initialize the MMC64. */
mmc64_init();
#ifdef HAVE_TFE
/* Initialize the TFE. */
tfe_init();
#endif
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#endif
c64iec_init();
c64fastiec_init();
cartridge_init();
}
machine_drive_stub();
return 0;
}