/**
@brief main() Initialize user task
@return void
*/
MEMSPACE
void user_init(void)
{
int i;
os_event_t *handlerQueue;
char time[20];
int ret;
uint16_t *ptr;
uint32_t time1,time2;
uint32_t ID;
extern uint16_t tft_ID;
double ang;
os_delay_us(200000L); // Power Up dalay - lets power supplies and devices settle
// Configure the UART
uart_init(BIT_RATE_115200,BIT_RATE_115200);
DEBUG_PRINTF("\n");
DEBUG_PRINTF("System init...\n");
DEBUG_PRINTF("HSPI init...\n");
hspi_init(1,0);
DEBUG_PRINTF("Timers init...\n");
init_timers();
DEBUG_PRINTF("SD Card init...\n");
mmc_init(1);
// CPU
// 160MHZ
// REG_SET_BIT(0x3ff00014, BIT(0));
// 80MHZ
// REG_CLR_BIT(0x3ff00014, BIT(0));
DEBUG_PRINTF("Display Init\n");
// Initialize TFT
master = tft_init();
ID = tft_ID;
// Set master rotation
tft_setRotation(1);
/* Setup main status window */
tft_window_init(winstats,0,0, master->w * 7 / 10, master->h/2);
tft_setpos(winstats, 0,0);
tft_set_font(winstats,5);
tft_font_var(winstats);
tft_setTextColor(winstats, ILI9341_RED,0);
tft_printf(winstats, "DISP ID: %04lx\n", ID);
ip_xpos = winstats->x;
ip_ypos = winstats->y;
tft_printf(winstats, "\n");
tft_setTextColor(winstats, ILI9341_WHITE,0);
#if ILI9341_DEBUG & 1
DEBUG_PRINTF("\nDisplay ID=%08lx\n",ID);
#endif
tft_font_fixed(winstats);
// Save last display offset of the status update line - used in the demo task
xpos = winstats->x;
ypos = winstats->y;
/* Setup cube/wireframe demo window */
tft_window_init(windemo,winstats->w,0, master->w - winstats->w, master->h/2);
// Cube points were defined with sides of 1.0
// We want a scale of +/- w/2
if(windemo->w < windemo->h)
dscale_max = windemo->w/2;
else
dscale_max = windemo->h/2;
dscale = dscale_max;
dscale_inc = dscale_max / 100;
/* Setup second window for window testing*/
tft_window_init(wintest,0,master->h/2, master->w/2, master->h/2);
tft_setTextColor(wintest, ILI9341_WHITE,ILI9341_NAVY);
tft_fillWin(wintest, wintest->bg);
tft_set_font(wintest,3);
//tft_font_var(wintest);
// write some text
tft_setpos(wintest, 0,0);
tft_printf(wintest, "Test1\nTest2\nTest3");
/* Test demo area window */
tft_window_init(wintestdemo,master->w/2,master->h/2,master->w/2, master->h/2);
tft_setTextColor(wintestdemo, ILI9341_WHITE,0);
tft_fillWin(wintestdemo, wintestdemo->bg);
tft_set_font(wintestdemo,3);
tft_font_var(wintestdemo);
#if ILI9341_DEBUG & 1
DEBUG_PRINTF("Test Display Read\n");
read_tests(wintest);
#endif
/* Draw cube in the second window as a test */
#if defined(WIRECUBE) && !defined(EARTH)
DEBUG_PRINTF("Draw Cube\n");
// Cube points were defined with sides of 1.0
// We want a scale of +/- w/2
double tscale_max;
if(wintestdemo->w < wintestdemo->h)
tscale_max = wintestdemo->w/2;
else
tscale_max = wintestdemo->h/2;
ang = 45.0;
V.x = ang;
V.y = ang;
V.z = ang;
wire_draw(wintestdemo, cube_points, cube_edges, &V, wintestdemo->w/2, wintestdemo->h/2, tscale_max, ILI9341_RED);
#endif
#ifdef EARTH
DEBUG_PRINTF("Draw Earth\n");
// Earth points were defined with radius of 0.5, diameter of 1.0
// We want a scale of +/- w/2
double tscale_max;
if(wintestdemo->w < wintestdemo->h)
tscale_max = wintestdemo->w;
else
tscale_max = wintestdemo->h;
V.x = -90;
V.y = -90;
V.z = -90;
// draw earth
//time1 = system_get_time();
// Earth points were defined over with a scale of -0.5/+0.5 scale - so scale must be 1 or less
wire_draw(wintestdemo, earth_data, NULL, &V, wintestdemo->w/2, wintestdemo->h/2, tscale_max, wintestdemo->fg);
//time2 = system_get_time();
#endif
wdt_reset();
DEBUG_PRINTF("User Task\n");
// Set up a timer to send the message to User Task
os_timer_disarm(&UserTimerHandler);
os_timer_setfn(&UserTimerHandler,(os_timer_func_t *)sendMsgToUserTask,(void *)0);
os_timer_arm(&UserTimerHandler, USER_TASK_DELAY_TIMER, 1);
// Setup the user task
system_os_task(UserTask, UserTaskPrio, UserTaskQueue, UserTaskQueueLen);
#ifdef TELNET_SERIAL
DEBUG_PRINTF("Setup Network Serial Bridge\n");
bridge_task_init(23);
#endif
#ifdef NETWORK_TEST
DEBUG_PRINTF("Setup Network TFT DIsplay Client\n");
setup_networking(TCP_PORT);
#endif
#if 0
// Misc Task init - testing only
system_os_task(HighTask, HighTaskPrio, HighTaskQueue, HighTaskQueueLen);
system_os_task(NormalTask, NormalTaskPrio, NormalTaskQueue, NormalTaskQueueLen);
system_os_task(IdleTask, IdleTaskPrio, IdleTaskQueue, IdleTaskQueueLen);
system_os_post(IdleTaskPrio, 0, 0);
#endif
DEBUG_PRINTF("Done Setup\n");
DEBUG_PRINTF("Heap Size(%d) bytes\n" , system_get_free_heap_size());
// disable os_printf at this time
system_set_os_print(0);
system_init_done_cb(init_done_cb);
}
// main task loop called by yield code
void user_loop(void)
{
extern int connections;
uint32_t time1,time2;
long t;
#ifdef DISPLAY
char time_tmp[32];
uint8_t red, blue,green;
int touched;
uint16_t X,Y;
#endif
// getinfo.ip.addr, getinfo.gw.addr, getinfo.netmask.addr
struct ip_info getinfo;
char *ptr;
// ========================================================
// Run all remaining tasks once every 1mS
t = ms_read();
if((t - last_time10) < 1U)
return;
last_time10 = t;
// ========================================================
// Tasks that must run very fast , once every millisecond should be at the top
#ifdef ADF4351
ADF4351_task();
#endif
#ifdef XPT2046
XPT2046_task();
#endif
// ========================================================
// Only run every 50mS
t = ms_read();
if((t - last_time50) < 50U)
return;
last_time50 = t;
// ========================================================
user_tasks();
// NTP state machine
ntp_setup();
#ifdef DISPLAY
#ifdef XPT2046
if(tft_is_calibrated)
{
touched = tft_touch_key(master,(uint16_t *)&X, (uint16_t *)&Y);
#if XPT2046_DEBUG
if(touched)
tft_printf(winmsg,"X:%d,Y:%d\n",(int)X,(int)Y);
#endif
}
#endif
#ifdef NETWORK_TEST
servertest_message(winmsg);
#endif
#ifdef DEBUG_STATS
#ifdef VOLTAGE_TEST
#ifdef DEBUG_STATS
// Do NOT run adc_read() every millisecond as system_adc_read() blocks WIFI
tft_set_textpos(wintop, 0,2);
tft_printf(wintop,"Volt:%2.2f\n", (float)adc_read());
#endif
#endif // VOLTAGE_TEST
count += 1;
tft_set_textpos(wintop, 0,0);
tft_set_font(wintop,0);
tft_font_fixed(wintop);
tft_printf(wintop,"Iter:% 10ld, %+7.2f\n", count, degree);
#endif
#ifdef CIRCLE
rad = dscale; // +/- 90
tft_drawCircle(wincube, wincube->w/2, wincube->h/2, rad ,wincube->bg);
// RGB
#endif
// reset cube to background
#ifdef WIRECUBE
V.x = degree;
V.y = degree;
V.z = degree;
// Cube points were defined with sides of 1.0
// We want a scale of +/- w/2
wire_draw(wincube, cube_points, cube_edges, &V, wincube->w/2, wincube->h/2, dscale, wincube->bg);
#endif
degree += deg_inc;
dscale += dscale_inc;
if(degree <= -360)
deg_inc = 4;
if(degree >= 360)
deg_inc = -4;
if(dscale < dscale_max/2)
{
dscale_inc = -dscale_inc;
}
if(dscale > dscale_max)
{
dscale_inc = -dscale_inc;
}
#ifdef WIRECUBE
V.x = degree;
V.y = degree;
V.z = degree;
wire_draw(wincube, cube_points, cube_edges, &V, wincube->w/2, wincube->h/2, dscale, ILI9341_WHITE);
#endif
#ifdef CIRCLE
// Display bounding circle that changes color around the cube
if(dscale_inc < 0.0)
{
red = 255;
blue = 0;
green = 0;
}
else
{
red = 0;
blue = 0;
green = 255;
}
rad = dscale; // +/- 90
tft_drawCircle(wincube, wincube->w/2, wincube->h/2, rad, tft_RGBto565(red,green,blue));
#endif
#endif // DISPLAY
// ========================================================
// Tasks run only once every second go after this
time(&sec);
if(sec == seconds)
return;
seconds=sec;
// ========================================================
#ifdef DISPLAY
// ========================================================
// TIME
tft_set_textpos(winbottom, 0,0);
//Tue May 17 18:56:01 2016
strncpy(time_tmp,ctime(&sec),31);
time_tmp[19] = 0;
tft_printf(winbottom," %s", time_tmp);
tft_cleareol(winbottom);
tft_set_textpos(winbottom, 0,1);
// ========================================================
// CONNECTION status
//tft_printf(winbottom," %s", ip_msg);
// IP and disconnected connection state only
if(wifi_get_ip_info(0, &getinfo))
tft_printf(winbottom," %s", ipv4_2str(getinfo.ip.addr));
else
tft_printf(winbottom," Disconnected");
tft_cleareol(winbottom);
#ifdef DEBUG_STATS
// ========================================================
// HEAP size
tft_set_textpos(wintop, 0,1);
tft_printf(wintop,"Heap: %d, Conn:%d\n",
system_get_free_heap_size(), connections);
// ========================================================
// WIFI status
tft_set_textpos(wintop, 0,3);
tft_printf(wintop,"CH:%02d, DB:%+02d\n",
wifi_get_channel(),
wifi_station_get_rssi());
#endif // DEBUG_STATS
#endif //DISPLAY
}
