C++ (Cpp) timer3Init Exemples

Exemple #1

Fichier : main.c Projet : keeepcool/Backup

int main(void){
	
	uint16_t byteCount = 0;
	char buffer0[32];
	
	HAL_Init();
	SYS_TimerInit();
	PHY_Init();
	NWK_Init();
	//SYS_INIT()
	timer3Init();
	uartInit();
	sei();

	while (1){
		
		SYS_TaskHandler();
		
		byteCount = uartAvailable();
		
		if(byteCount > 0){
			HAL_UartBytesReceived(byteCount);
			sprintf(buffer0, "Bytes to send: %i\n", byteCount);
			uartPuts(buffer0);
		}
		APP_TaskHandler();
	}
}

Exemple #2

Fichier : systemtime.c Projet : jan1s/hw-nixieclock-avr

void systemTimeInit(void)
{
	cli();
	milliseconds = 0;
	timer3Init();
	timer3SetMode(TIMER_MODE_CTC_OCR);
	timer3SetOutputModeA(TIMER_OUTMODE_TOGGLE);
	timer3SetCompareValueA(249);
	timerAttach(TIMER3OUTCOMPAREA_INT, systemTimeMillisecondsTick);
	sei();
}

Exemple #3

Fichier : main.c Projet : goshafreelock/sc-cd-pro

/*----------------------------------------------------------------------------*/
void sys_init(void)
{
#ifdef UART_ENABLE
    uartInit();
    printf("power up \r\n");
 #endif

#if RTC_ENABLE
    if (init_rtc())
    {
        work_mode = SYS_RTC;
    }
#else 
	{
		u8 rtc_reg;
	    rtc_reg=read_rtc_reg();
		//printf("RTC reg:%02bx\n",rtc_reg);	
		if (rtc_reg & BIT(6))   ///<RTC是否完全掉电
	    {
#if (MEMORY_STYLE == USE_RTCRAM)
			reset_rtc_ram();
#endif
			rtc_reg &= ~(BIT(6)); 				 //清零PDGLG
    			write_rtc_reg(rtc_reg);
	    }
	}
#endif

    P0IE_init();
    keyInit();
    timer1Init();
    timer3Init();
#ifdef USE_USB_SD_DECODE_FUNC	    
#ifndef NO_SD_DECODE_FUNC
    sd_speed_init(1,100);
    init_port_sd();
#endif
#endif
#if SDMMC_CMD_MODE
	sd_chk_ctl(SET_SD_H_CHK);
#endif
    DACCON0 |= 0x05;	//打开DSP
    EA = 1;
}

Exemple #4

Fichier : main.c Projet : goshafreelock/sc-cd-pro

/*----------------------------------------------------------------------------*/
void sys_init(void)
{
#ifdef UART_ENABLE
    uartInit();
    printf("power up \r\n");
 #endif

#if RTC_ENABLE
    if (init_rtc())
    {
        work_mode = SYS_RTC;
    }
#else 
	{
		u8 rtc_reg;
	    rtc_reg=read_rtc_reg();
		//printf("RTC reg:%02bx\n",rtc_reg);	
		if (rtc_reg & BIT(6))   ///<RTC是否完全掉电
	    {
#if (MEMORY_STYLE == USE_RTCRAM)
			reset_rtc_ram();
#endif
			rtc_reg &= ~(BIT(6)); 				 //清零PDGLG
    			write_rtc_reg(rtc_reg);
	    }
	}
#endif
    set_brightness_all_on();	

    P0IE_init();
    keyInit();
    timer1Init();
    timer3Init();
#ifdef USE_USB_SD_DECODE_FUNC	    
#ifndef NO_SD_DECODE_FUNC
    sd_speed_init(1,100);
    init_port_sd();
#endif
#endif
#if SDMMC_CMD_MODE
	sd_chk_ctl(SET_SD_H_CHK);
#endif
#ifdef USE_POWER_KEY
      sys_power_up();	
#endif	
    DACCON0 |= 0x05;	//打开DSP
    EA = 1;
#ifdef USE_POWER_KEY
      sys_power_up();	
#endif	
    work_mode = read_info(MEM_SYSMODE);

#ifdef CUSTOMED_POWER_ON_AT_RADIO_MODE
	work_mode  = SYS_FMREV;
#endif

    if (work_mode  == SYS_MP3DECODE_USB){

#ifdef REMOVE_USE_MODE
	work_mode  = SYS_FMREV;
	Disp_Con(DISP_TUNER);			
	return;
#endif

	Disp_Con(DISP_SCAN_DISK);

    }
    else if ((work_mode  == SYS_FMREV)
#ifdef AM_RADIO_FUNC		
	||(work_mode == SYS_AMREV)
#endif			
){

#ifdef AM_RADIO_FUNC		
		if(work_mode == SYS_AMREV){
			cur_sw_fm_band = MW_MODE;
		}
		else
#endif		
		{
			cur_sw_fm_band = FM_MODE;
		}
		Disp_Con(DISP_TUNER);			
    }
    else if (work_mode  == SYS_MCU_CD){

    		Disp_Con(DISP_SCAN_TOC);
    }	
    else if (work_mode  == SYS_AUX){
    		Disp_Con(DISP_AUX);
    }	
#if defined(USE_BLUE_TOOTH_FUNC)			
	
    else if (work_mode  == SYS_BLUE_TOOTH){
    		Disp_Con(DISP_BT);
    }	
#endif
	CD_PWR_GPIO_CTRL_INIT();
    	CD_PWR_GPIO_OFF();

	//TUNER_PWR_GPIO_CTRL_INIT();		
    	//TUNER_PWR_GPIO_OFF();

	AUX_GPIO_CTRL_INIT();
	AUX_PWR_GPIO_OFF();		

	BT_GPIO_CTRL_INIT();
	BT_PWR_GPIO_OFF();	
}