void BeepInit(void)
{
rcc_peripheral_enable_clock(&RCC_APB1ENR, BEEP_RCC_APB1ENR_TIMEN);
gpio_set_mode(BEEP_PORT, GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, BEEP_PIN);
timer_set_mode(BEEP_TIM, TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP);
/* Period */
timer_set_period(BEEP_TIM, 65535);
/* Prescaler */
timer_set_prescaler(BEEP_TIM, 5);
timer_generate_event(BEEP_TIM, TIM_EGR_UG);
/* ---- */
/* Output compare 1 mode and preload */
timer_set_oc_mode(BEEP_TIM, BEEP_TIM_OC, TIM_OCM_PWM1);
timer_enable_oc_preload(BEEP_TIM, BEEP_TIM_OC);
/* Polarity and state */
timer_set_oc_polarity_low(BEEP_TIM, BEEP_TIM_OC);
timer_enable_oc_output(BEEP_TIM, BEEP_TIM_OC);
/* Capture compare value */
timer_set_oc_value(BEEP_TIM, BEEP_TIM_OC, 0x8000);
/* ---- */
/* ARR reload enable */
timer_enable_preload(BEEP_TIM);
}
void hbridge_init() {
// M- bridge
// A9 - pin 21 - PWM2A - HIN
// B0 - pin 15 - PWM2B - \LIN
// M+ bridge
// A8 - pin 20 - PWM1A - HIN
// A7 - pin 14 - PWM1B - \LIN
rcc_peripheral_enable_clock(&RCC_APB2ENR,
RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN |
RCC_APB2ENR_AFIOEN | RCC_APB2ENR_TIM1EN);
AFIO_MAPR |= AFIO_MAPR_TIM1_REMAP_PARTIAL_REMAP;
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO7 | GPIO8 | GPIO9);
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO0);
timer_reset(TIM1);
timer_set_mode(TIM1, TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_CENTER_1,
TIM_CR1_DIR_UP);
timer_set_period(TIM1, half_period_ticks);
timer_set_prescaler(TIM1, 9); // / 10
timer_set_oc_mode(TIM1, TIM_OC1, TIM_OCM_PWM2);
timer_set_oc_polarity_high(TIM1, TIM_OC1);
timer_set_oc_polarity_low(TIM1, TIM_OC1N);
timer_enable_oc_output(TIM1, TIM_OC1);
timer_enable_oc_output(TIM1, TIM_OC1N);
timer_set_oc_value(TIM1, TIM_OC1, half_period_ticks);
timer_set_oc_mode(TIM1, TIM_OC2, TIM_OCM_PWM2);
timer_set_oc_polarity_high(TIM1, TIM_OC2);
timer_set_oc_polarity_low(TIM1, TIM_OC2N);
timer_enable_oc_output(TIM1, TIM_OC2);
timer_enable_oc_output(TIM1, TIM_OC2N);
timer_set_oc_value(TIM1, TIM_OC2, half_period_ticks);
timer_enable_break_main_output(TIM1);
timer_enable_counter(TIM1);
}
